Embed Size (px)
DESCRIPTION
creative@home Surrealistic recycling jewellery – the latest in trendy fashion styles. With FIMO, FIMO liquid, push moulds and parts of old watches or mechanical disc drives, you can create true originals in a retro-futuristic look. It’s certainly worth taking a look around flea markets or your grandad‘s old workshop. Image transfer – the ideal technique for transforming motifs from your favourite pictures into unique accessories.
Citation preview
1
You can find our products in well-stocked sales outlets.
Should you have any queries, please call our hotline: +49 (0)911 9365-888.
Have fun crafting!
Shopping / material list
Steam Punk
Steam Punk Surrealistic recycling jewellery – the latest in trendy fashion styles. With FIMO, FIMO liquid, push moulds and parts of old watches or mechanical disc drives, you can create true originals in a retro-futuristic look. It’s certainly worth taking a look around flea markets or your grandad‘s old workshop.
Image transfer – the ideal technique for transforming motifs from your favourite pictures into unique accessories
For crafting: Scissors, smooth surface, combi pliers, round nose pliersFor decorating: Rope chain, silver (with 5 strands, please test first to see if they fit throughtheholesoftheringframe)•Goldwireoreyeletpins, approx.4cmlong•2earringhooks,goldfinish,20mmlongeach •Silvertubes,approx.15mmlong•Silverbeadsapprox.Ø3mm
You will need these STAEDTLER articles:
Product Colour Art. No. Quantity 3
FIMO liquid Transparent 8050-00 BK 1
FIMO soft White 8020-0 1
FIMO effect Gold 8020-11 1
Push mould ‘Ornaments’ -- 872508 1
FIMO accessoires, round frame -- 862521 2
Metallic powder Gold 8709 BK 1
Glossvarnish -- 8703 01 BK 1
Bead-piercing needles -- 871220 1
Acrylic roller -- 8700 05 1
Modelling tools -- 8711 1
Blades -- 8700 04 1
Oven thermometer -- 870002 1
You can find more creative tips at www.staedtler.com
Level of difficultyeasy medium hard
1 2 3
Then press a little gold FIMO effect into this gold-dusted FIMO accessoires push mould. Use the blade or kitchen knife to cut off any excess FIMO. This leaves the motif with an even, smooth back.
Cut the eyelet pins to size and press horizontally into the mould. Then demould the ornament – i.e. push it carefully out of the push mould from the back.
For the decorative ornaments, brush a little gold metallic powder into the FIMO accessoires push mould.
2
Instructions for earrings and pendants
Cleaning:After use, wipe the mould clean using a damp cloth as traces of colour may otherwise show on subse-quent colours (use FIMO to dab out any left-over bits). Then clean with soap and water.
Tip:The use of metallic powder, talc or baby powder facilitates demoulding.
You can find more creative tips at www.staedtler.com
Level of difficultyeasy medium hard
4 5 6
7
3
First print out the pattern sheet for the eyes and clock and cover all over with a thin layer of FIMO liquid.Please note: Do not leave any areas uncovered.
Cut the motifs out, place them on the baking tray, weigh them down with magnets or coins and harden in the oven at130°Cforapprox.20minutes.
Instructions for the clock using image transfer
Cleaning:Clean dirty brushes and clothing with acetone or orange peel oil.
Storage:Store FIMO liquid at room temperature and avoid contact with PVC or polystyrene.
After hardening, allow the motifs to cool and then cut them out.
Gentlyrubthepaperoffinlukewarmwater.Athinlayermay remain. Then leave to dry.
TIP:Larger motifs should be weighed down while drying too in order to avoid rippling.
You can fi nd more creative tips at www.staedtler.com
Level of diffi cultyeasy medium hard
8 9 10
4
Instructions for the clock
11 12 13
Fortheclock,rollwhiteFIMOouttoanapprox.2mmthicksheet. Roll half a strip of FIMO effect in metallic gold to makeanapprox.2mmthicklengthofstring.
Place the FIMO liquid image transfer onto the white sheet of FIMO and press on a little. Then position the golden FIMO string around it.
Add a push mould ornament at the side and cut the whole object out with a kitchen knife.
Brush around the edge with gold-coloured metallic powder. Cut an eyelet pin to size; stick it through the ring frame and into the edge of the clock at the top. It should at least extend to the middle of the pendant. Use FIMO liquid to stick hands on.
Next, thread the ring frames onto a bead-piercing needle and fill them with white FIMO. Place the image-transferred eyes from steps 4 - 7 on top.
You can find more creative tips at www.staedtler.com
Level of difficultyeasy medium hard
16
5
Hardening and fi nishing
14 15
Once cool, cover all FIMO elements with a coat of gloss varnish; this gives them an attractive shiny fi nish and protects them at the same time.
Finish off by threading the individual elements onto a chain together with tubes and beads. Assemble the earrings using one bead and one eye for each one.
Important:Please note the different hardening times and temperatures.FIMO soft = 110°C / 30 minutesFIMOliquid=130°C/20minutes
Place the earrings and pendant on the baking tray and harden in the oven for approx. 30 minutes at 110°C.
You can fi nd more creative tips at www.staedtler.com
Level of diffi cultyeasy medium hard
6
Pattern sheet Steam punk is a new fashion trend which uses elements from steam and cogwheel drive mechanisms. Different FIMO liquid techniques can be used here, e.g. embedding, image transfer, colour effects. Simply use old watches, alarm clocks or other mechanical parts to craft totally new creations. There are no limits to what you can make.
Pattern sheet Pattern sheetPattern sheetYou can fi nd more creative tips at www.staedtler.com
Level of diffi cultyeasy medium hard
