Sliding door system for universal cabinet constructions. TopLine M

2

Creative versatility with flexible cabinet design optionsTopLine M

3

The new TopLine M sliding door system has been developed with the specific aim of making high-quality design possible for small-size cabinets in the RTA segment. With its discreet, unobtrusive runner profile, TopLine M provides the ideal basis for elegant design options featuring overlay doors.

The new TopLine M sliding door system makes it easy to change your production process from overlay hinged-door to modern overlay sliding door design. There‘s no simpler way: Instead of hinged-door applications, you can now produce designer-style sliding door furniture using the same cabinet construction.

4

System-based sliding door fittingTopLine M

5

Optimum sliding door performance is determined by door width, height and weight. TopLine M meets the Hettich quality standard, based on EN 15706, within the marked height/width ratio. In the door-closing test described in this standard, the door is accelerated with a tensile load of 2 kg and is required to withstand a defined number of closing cycles. Maximum door weight is 35 kg.

Technical details in brief

· 2-track, top-running sliding door fi tting

· Overlay door position

· Door weight up to 35 kg

· Door thickness up to 19 mm

· Door height up to 2100 mm

· Door width 650 to 1000 mm

Using the top-running TopLine M, furni-ture manufacturers benefit from boundless design flexibility for overlay doors. Visually unobtrusive, the runner profile leaves all design options open – and the bottom guide profile provides a measure of flexibility too as it can be mounted in front of the bottom panel or below it.

The doors can be positioned one in front of the other leaving them completely flush. Spacers can be used for fitted projecting handle elements. Doors are aligned by means of elongated holes on the running component.

Hettich offers TopLine M sliding door fitting as an all-inclusive system. So when changing from hinged-door to sliding door unit, cabinet production remains exactly the same. In addition to running and guiding profile, cabinet connecting profiles, cabinet end profiles and door profiles are available too.

Door

hei

ght

in m

m

Door width in mm

up t

o 19

00

up t

o 21

00

up t

o 17

00

up t

o 15

00

up t

o 14

00

700650

800900up to 1000

6

Hettich and the environment: committed to responsible practice, active protection, innovative thinking.

Hettich takes a responsibility for the world we live in. This awareness defines the strict policy of environmental management we practise. Our environmental officer has taken personal responsibility for these aspects through-out the company group over a period of many years. In addition, a separate environment committee has been established for each production site. We regard statutory provisions as minimum requirements. At significant sites we also implement the stringent EMAS Directive. And we drive forward developments that in future will help to save even more raw materials and support the necessary endeavours towards sustainability.

Hettich environmental management

Hettich started introducing effective environmental manage-ment systems under the stringent EMAS Regulation (currently: EC Regulation No. 761/2001, including EN ISO 14.001/2004) as long ago as 1996. This not only enables us to improve our environmental performance on a broad front but also achieve a high level of safety which, not least, also benefits our cus-tomers. This is why we also require our suppliers to meet the necessary minimum standards of environmental protection, industrial safety, health care and social welfare.The results achieved in the drawer-runner and drawer-system product segment at the Kirchlengern operation illustrate the impressive effects these measures have and verifiably demon-strate our tireless endeavours to translate words into action:

Relief to the environment between 1997 and 2008:

Specific water consumption: 56 per cent Specific power consumption: 21 per cent Specific heat consumption: 84 per cent Specific CO2 emissions: 29 per cent

7

Hettich standard for product materials

Hettich underpins its commitment by applying an in ternal standard for product materials. This ensures that every product – from production to disposal – satisfies all environmental requirements. Products from Hettich come with a long life. Appropriately foresighted, our rigorous standards are formulated to ensure that international legislation is met as well. This provides a reliable basis for marketing furniture world-wide.

Zero-energy building - Hettich Forum

The Hettich Forum building with its neutral energy balance is a shining example of future-proof building design. Photovoltaic panels and solar collection system providing hot water as well as extensive roof greening and use of rain water underscore this building‘s over-all sustainability concept in just the same way as the broad use of cellulose insulation material from recycled newspapers, highly efficient heat recovery and the bulb-free lighting concept do.

With the Hettich Group having acquired European Com-mission GreenBuilding Partner status on 5 March 2009, the comprehensive approach demonstrated by the Hettich Forum has also convinced the adjudicating panel of the national “Green Building Award 2009“. Hettich received the first prize to be presented in the “New Building“ category.

8

10°

Quality criteria

· Life cycle test over 20,000 cycles

· Closing test with a tensile load of 2 kg

· Lift-out test with 150 N

· Load test in horizontal direction with 250 N

The TopLine M sliding door system is constantly monitored for quality. The varying quality standards demanded by different markets and segments are each taken into account. The diagrams below show examples of some of the testing processes and what they involve.

Life cycle test The door is required to withstand a specific number of opening and closing cycles at a defined speed.

Closing test The door is required to withstand a specific number of closing cycles performed under a defined tensile load.

Lift-out test The door is pulled up and forwards at an angle with a defined force and must neither come off or fall out of the cabinet.

Horizontal safety test Pressure is applied to the middle of the door with a defined force. The door must neither come off or fall out of the cabinet.

TopLine MQuality that meets all of demands

Test to DIN EN 15706

9

16min. 15max. 19

32

45

32

Türh

öhe

32

16min. 15max. 19

19

max.19

10 max.19

3,5

925,8

8

10 bei Anschlagmaß < 18

15 - 19

min. 20

EB 29

ø4x15

120 19

10

57

7

54 32

3254

2 14

14

16min.15max.19

16

9

65

16min.15max.19

7

14

10

127

10

54

16min.15max.19

16

14

16min.15max.19

8

10

19

7

32

Sliding door system TopLine MInstallation in front of top panelFitting situation for running and guiding components

Offset opening

Flush opening

for stop dimension < 18

Door

hei

ght

10

9

25,88 ø 5,5

ø 6,2 ø 6,2

ø 4,122450

c1

b1aX

93,5

Gesamtlängec2

10 10ø 5,5

* PU = packaging unit Min. qty.= minimum quantity a) Quantity required for 2-door cabinet b) Quantity required for 3-door cabinet

Sliding door system TopLine MInstallation in front of top panelInformation on ordering running profiles and running components

Article

TopLine M running profile

· Any length on request

Overall length

TopLine M running component for front-most door

· With toolless lift-off guard· Plastic rollers· Galvanised steel

TopLine M running component for rear-most door

· With toolless lift-off guard· Plastic rollers· Plastic grey

Support block for running profile

· Attachment by ø 3.5 mm wood-screws

· Plastic grey

Special ø 4 x 14 mm screw

· For attaching the end stop· Galvanised steel

End stop for running profile

· Attachment by special ø 4 x 14 mm screw, see below

· Plastic grey

TopLine M centre stop

· For front-most door· Attachment by ø 3.5 mm x 25 mm wood-screw

· Plastic grey

Spacers

· Attachment by ø 4 mm x 15 mm wood-screw

· Plastic grey

9 105 096 100 100 2 2

9 105 097 400 400 2 4

9 021 208 1000 1000 2 2

9 105 432 1000 1000 2 2

9 105 577 1000 1000 2 2

9 105 356 1000 1000 1 optional 2 optional

9 127 012 1000 1000 - 1

Material Order no. PU* Min. qty.*

Quantity a) *

Quantity b) *

Steel LA 10160 50 100

Aluminium silver

LA 10320 50 100

11

120 35

10

16min. 15max. 19

1457

7

2

54 32

32

45

32

Türh

öhe

32

32

54

15min. 15max. 19

19

10

3,5

925,8

8

10 bei Anschlagmaß < 18

15 - 19

min. 20

EB 29

ø 4 x 15

20 - 30

25

50

35

min. 15

66

3,4

31

5,2

11 max. 19

70

15min. 15 / max. 19

19

ø3,5x25

ø 4 x 15

25

a1

Gesamtlänge

224= 50Teilung

ø 3

11

Guiding profile STB 16.1

· Profile positioned in front of the bottom panel

· Any length on request· Plastic grey

Division

Overall length

Sliding door system TopLine MInstallation in front of bottom panelFitting situation and information on ordering guiding profiles, guiding components

LA 10165 50 100 1 1

9 105 098 50 200 2 2

9 105 350 1000 1000 2 4

Order no. PU* Min. qty.*

Quantity a) *

Quantity b) *

for stop dimension < 18

Guiding component STB 16.1 for front-most door

· Profile positioned in front of the bottom panel· Galvanised steel

Guiding component STB 16.1 for rear-most door

· Profile positioned in front of the bottom panel

· Plastic grey

12

120 35

10

16min. 15max. 19

1457

7

2

54 32

32

45

32

Türh

öhe

32

32

54

15min. 15max. 19

19

10

3,5

925,8

8

10 bei Anschlagmaß < 18

15 - 19

min. 20

EB 29

ø 4 x 15

20 - 30

25

a1

Gesamtlänge

224

ø 314,2

= 50Teilung

20

50

14

16

19 15 - 19

22,214,231

66

15min. 15 / max. 19

19

ø3,5x16ø 4 x 15

25

Guiding profile STB 16.2

· Profile positioned below the bottom panel

· Any length on request· Plastic grey

Division

Overall length

Sliding door system TopLine MInstallation below the bottom panelFitting situation and information on ordering guiding profiles, guiding components

LA 10166 50 100 1 1

9 105 337 100 200 2 2

9 105 099 100 200 2 4

Order no. PU* Min. qty.*

Quantity a) *

Quantity b) *

for stop dimension < 18

Guiding component STB 16.2 for front-most door

· Profile positioned below the bottom panel· Galvanised steel

Guiding component STB 16.2 for rear-most door

· Profile positioned below the bottom panel· Plastic grey

* PU = packaging unit Min. qty.= minimum quantity a) Quantity required for 2-door cabinet b) Quantity required for 3-door cabinet

13

Set content Order no. Standard

Order no. For challenging climaticconditions

Components for 2-door cabinets

For guiding profile in front of bottom panel (=STB 16.1)

2 x running component for front-most door

2 x running component for rear-most door

2 x guiding component for front-most door

2 x guiding component for rear-most door (included in hardware bag)

1 x hardware bag1 x bag of screws

9 133 612 9 130 735

For guiding profile below bottom panel (=STB 16.2)

9 133 641

Components for 3-door cabinets

For guiding profile in front of bottom panel (=STB 16.1)

2 x running component for front-most door

4 x running component for rear-most door

2 x guiding component for front-most door

4 x guiding component for rear-most door (included in hardware bag)

1 x hardware bag1 x bag of screws

9 129 577 9 133 586

For guiding profile below bot-tom panel (=STB 16.2)

9 133 642

Material Order no.

Running profiles Steel LA 10160

Aluminium silver LA 10320

Guiding profiles Guiding profile in front of bottom panel (=STB 16.1)

Plastic grey LA 10165

Guiding profile below bottom panel (=STB 16.2)

Plastic grey LA 10166

Sliding door system TopLine MInstallation in front of the top panelInformation on ordering sets, running and guiding profiles

Additional running and guiding profiles (not included in sets)

14

ø 5

16,5

2314

= 66 a2 = 128

Gesamtlänge

a1 a7=256

a8= 288 aX

ø 5

23,75

16,5

14

= 66 a2 = 128

Gesamtlänge

a1 a7=256

a8= 288 aX

ø 5

2014

= 66 a2 = 128

Gesamtlänge

16,5

29

a1 a7=256

a8= 288 aX

ø 5

2014

= 66 a2 = 128

Gesamtlänge

19,5

29

a1 a7=256

a8= 288 aX

Door profile

· For door thicknesses of 15-16 mm· Any length on request· Steel silver (with protection foil)· Aluminium silver

Door end profile, L-shaped

· For door thicknesses of 15-16 mm· Any length on request· Galvanised steel· Aluminium silver

Door end profile, U-shaped

· For door thicknesses of 15-16 mm· Any length on request· Steel silver (with protection foil)· Aluminium silver

Overall length

Overall length

Overall length

Overall length

Article

Steel LA 10197 100 300 3 4

Aluminium silver

LA 10333 100 300 3 4

Steel LA 10203 100 100 1 -

Aluminium silver

LA 10336 100 100 1 -

Steel LA 10199 100 200 - 2

Aluminium silver

LA 10337 100 200 - 2

Steel silver (protection foil)

LA 10198 100 on demand

3 4

Aluminium silver

LA 10441 100 100 3 4

Material Order no. PU* Min. qty.* Quantity a) *

Quantity b) *

Door profile

· For door thicknesses of 18-19 mm· Any length on request· Steel silver (with protection foil)· Aluminium silver

Sliding door system TopLine MSystem components

Door profile

Door profile

Door end profile, U-shaped

Door end profile, L-shaped

Cabinet end profile, rear-most door

Cabinet end profile, rear-most door

Cabinet end profile, front-most door

Brush sealing stripBrush sealing strip

15

8

7

ø 5

14,8

17

10a1 = 70 a2 = 352

Gesamtlänge

a1

ø 5

46

14,8

10a1 = 70 a2 = 352

Gesamtlänge

a1

ø 5

23,75

19,5

14

= 66 a2 = 128

Gesamtlänge

a1 a7=256

a8= 288 aX

* PU = packaging unit Min. qty.= minimum quantity a) Quantity required for 2-door cabinet b) Quantity required for 3-door cabinet

Steel LA 10202 100 100 1 2

Aluminium silver

LA 10335 100 100 1 2

Steel LA 10201 100 100 1 -

Aluminium silver

LA 10334 100 100 1 -

LA 10209 300 100

9 110 132 600 300

Steel silver (protection foil)

LA 10200 100 on demand

- 2

Aluminium silver

LA 10442 100 100 - 2

Material Order no. PU* Min. qty.* Quantity a) *

Quantity b) *

Article

Cabinet end profile, front-most door

· Any length on request· Steel silver (with protective film)· Aluminium silver

Brush sealing strip

· Self-adhesive· For dust-proof seals· Any length on request

Connecting strap

· For connecting segmented sliding door fronts

· Galvanised steel

Cabinet end profile, rear-most door· Any length on request· Steel silver (with protective film)· Aluminium silver

Optional accessories

Door end profile, U-shaped

· For door thicknesses of 18-19 mm· Any length on request

Overall length

Overall length

Overall length

Hettich Marketing- und Vertriebs GmbH & Co. KGVahrenkampstrasse 12-1632278 KirchlengernGermany

Phone +49 5223 77-0Fax +49 5223 77-1948info@de.hettich.comwww.hettich.com

1112

-036

_TLM

_011

2_H

MV/

en