SL 381 Catolog

APPLICATIONLow cost, general duty, non-environmentalcylindricals with hard dielectric inserts.

MIL-C-5015 type.UL recognized.CSA certified.

COUPLING TYPEThreaded coupling (intermateable with ACthreaded and MIL-C-5015 connectors).

ENVIRONMENTAL PERFORMANCE

Operating voltage to 3000 VAC (RMS) atsea level.

TERMINATION TYPESolder - 310X types.Crimp rear-release - 410X types.

STANDARDS

OPTIONAL FEATURES

• Solid or split shell construction.• 6 shell styles, 128 insert patterns.• Standard OD cadmium finish, optional

finishes include non-cadmium zinc alloy.• Thermocouples & reel assembly contacts.• 97 Series reverse bayonet style available.• Variety of backend accessories.

Grounded contact to shell provides firstmate/last break capability and protectssensitive circuits and operators.

MIL-C-5015 type shells and inserts.Intermateable with MIL-C-5015 and 97series.Conformity with European safetystandards (DIN VDE 0627) and certifiedthrough TUV Product Service GMBH.

Threaded coupling.

Meets Class IP67 protection against waterand dust.

Solder termination.

• 3 shell styles, 7 insert patterns.• Standard plating is conductive black zinc

alloy; green zinc plating optional.

TYPICAL MARKETS

• Machine Tool• Semiconductor Test & Assembly• Welding Equipment

Reference Catalog 12-022 Reference Prod. Sheet #187Reference Catalog 12-020

IndustrialAmphenol Industrial Connectors

97 Series Pre-Earth/FMLBMS/StandardMIL-C-5015

ELECTRICAL PERFORMANCE

Operating temperatures from –55°C to+125°C.

• Servo and Power Motors• Machine Tool• Factory Automation

General duty, environmentally resistantcylindricals with resilient neoprene inserts.

MS versions produced in strictaccordance with MIL-C-5015 specifica-tions.• Class A, general usage• Class C, pressurized• Class E, F & R, environmental

Threaded coupling


MS versions are solder.Non-MS versions in crimp or solder.

• 5 shell styles, 286 insert patterns.• Hermetic configurations available.• Standard OD cadmium finish, optional

finishes include non-cadmium zinc alloy.• Coax, thermocouple and PCB contact

options.• Variety of backend accessories.

• Heavy Equipment/ Off Road Vehicles• Mass Transportation• Power Generation

Operating temp. from –55°C to +125°C.Resilient inserts provide high dielectricstrength and moisture barrier. IP67performance in environmental versions.


Amphenol offers more choices, more solutions, more options than any other interconnectionmanufacturer, and continues to develop products for emerging technologies. The marketsthat are served by Amphenol’s industrial connector products are very broad; see typicalmarkets listed below for each product family and consult Amphenol for further assistance.

Website: www.amphenol-industrial.com Phone: 607-563-5011 Fax: 607-563-5157

AC Threaded Series

APPLICATION

COUPLING TYPE


TERMINATION TYPE

STANDARDS

OPTIONAL FEATURES

Modification of MIL-C-5015 connectorfamily, designed for industrial applications.General duty, environmentally resistant.

Dimensions, styles and performanceequate to MIL-C-5015 and the 97 Series.

Threaded coupling AC Series.(Note: Previously offered AC-B Bayonetis replaced with ACA-B Bayonet Series.)

Operating temp. from –55°C to +125°C.Resilient inserts provide high dielectricstrength and moisture barrier.

Crimp or solder termination.

• 5 shell styles, 275 insert patterns.• Nickel and black zinc plating, plus other

finishes available.• Variety of backend accessories including

PG adapters.

TYPICAL MARKETS

Reference Catalog 12-025


• Process Control• Sensors• Test and Measurement


ARCL Series

Contact Amphenol Industrial Operations forfurther information

Amphe-dB SeriesIndustrial Filter

Reference Prod. Sheet #189

Amphe-dB is an industrial filter and chipcapacitor board with a modified MIL-C-5015 connector.

“Pi”, “C”, and chip capacitor boardtechnology is incorporated into theindustrial high performance connector toprovide protection from electro-magneticinterference (EMI).

Threaded coupling.

Solder, crimp and PCB terminations.

Operating temp. from –55°C to +125°C.Voltage range from 6 to 240 VDC.Provides space savings and eliminatesneed to redesign circuit boards.

• Filtering available for all standard insertpatterns. Contact sizes 22,20 and 16.

• Industrial filters can also be incorporatedinto MIL-C-26482 series and theAmphe-Lite series.

• Welding Equipment to filter sensor leads• GPS Systems on earth moving equip.• Heavy Equip. to meet EC requirements

MIL-C-5015 performance. Protectionfrom MF, HF, VHF, UHF frequencies.

Modification of MIL-C-5015 connectorwith 38999 Series III type coupling.Designed for heavy duty applications.

Dimensions, styles and performanceequate to MIL-C-5015. Also designed forincorporation of 5015 low-smoke zerohalogen inserts.

Ratchet double-start stub threadedcoupling similar to MIL-DTL-38999Series III with 5 key/keyway alignmentfeature.



• 5 shell styles, 275 insert patterns.• RADSOK high amperage sockets

available.• Variety of backend accessories

including over-molding and heatshrinkable boots.

• Mass Transportation• Heavy Equipment



APPLICATION

COUPLING TYPE


TERMINATION TYPE

STANDARDS

OPTIONAL FEATURES

TYPICAL MARKETS


GT Bayonet Series

Heavy duty, rugged connector,environmentally resistant.Preferred connector for mass transit.

UL recognized.Utilizes MIL-C-5015 inserts.Intermateable with existing VG95234connectors.

Reverse bayonet coupling (quickmating, audible, visual and tactile fullmating indicators). Rated to 2000couplings min.

Operating temp. from –55°C to +125°C;with Viton inserts from –50°C to +200°C.Resilient inserts provide high dielectricstrength and moisture barrier. IP67performance in environmental versions.

Crimp or solder termination. Availablewith RADSOK sockets.

• Over 40 varieties of shell styles andbackend accessory combinations.

• Optional insert materials: Neoprene, Viton,or low smoke/flame retardant.

• Variety of platings including non-cadmium.• Resilient cover coupling nuts available.• GT-PC with first mate/last break features.

Reference Catalog 12-027 Reference Catalog 12-024

• Mass Transportation• Power Generation, Petro-Chemical• Heavy Equipment, Geophysical


ACA-B Bayonet Series

Modification of MIL-C-5015 connector,environmentally resistant. Rugged,industrial power and signal usage.

Utilizes MIL-C-5015 inserts.Intermateable with existing VG95234connectors.

Reverse bayonet coupling. Rated to 500couplings min.

Operating temp. from –55°C to +125°C.Resilient inserts provide high dielectricstrength and moisture barrier. IP67performance in environmental versions.


• 7 shell styles, 75 insert patterns.• Shells are aluminum alloy and plated

with a variety of finishes including zincalloy.

• Variety of accessory hardware toaccommodate heavy duty wire andcable.

• Automation, Machine Tool, Robotics• Instrumentation, Process Contol• Test and Measurement


P-Lok®

Standard duty, control and signal rapidmating connector for use where MIL-C-5015 threaded connectors could be used.

Same electrical characteristics andapproximate size as MIL-C-5015connectors, but is not intermateable with5015 types.

Spring pressure coupling - simple push tomate/pull to unmate provides positivelocking.

Environmentally sealed - rated to IP65specifications.Black hard coat finish provides longservice life.


• 4 shell styles, 80 insert patterns.• Variety of backend accessories.

• Robotics• Factory Automation• Entertainment Equipment


Reference Pyle P-Lok Catalog

This overview brochure references detailed catalogs for each connector type. Please see ourwebsite for on-line catalogs, or contact us by phone or fax for more information concerningthe connectors covered in this publication, or if there are special application needs.


MIL-C-26482Series 1

Standard duty, control and signal rapidmating connector for use where MIL-C-5015 threaded connectors could be used.

Same electrical characteristics andapproximate size as MIL-C-5015connectors, but is not intermateable with5015 types.

Spring pressure coupling - simple pushto mate/pull to unmate provides positivelocking.

Environmentally sealed - rated to IP65specifications.Black hard coat finish provides longservice life.


• 4 shell styles, 80 insert patterns.• Variety of backend accessories.

• Robotics• Factory Automation• Entertainment Equipment

APPLICATIONMiniature, environmental connector.Large family with wide variety of styles.

MS versions produced in strict accor-dance to MIL-C-26482, Series 1.MS-PT Service Classes E, F and P typesare UL recognized.Several non-MS types offered.

COUPLING TYPEThree point bayonet coupling.Threaded PC types also available.



TERMINATION TYPECrimp or solder termination.

STANDARDS

OPTIONAL FEATURES

• 7 shell styles, 57 insert patterns.• Hermetic configurations available.• Standard OD cadmium finish, optional

finishes include non-cadmium zinc alloy.• Coax, thermocouple and PCB contact

options.• Variety of backend accessories.

TYPICAL MARKETS

• Instrumentation/Control /Machine Tool• Communications• Geophysical




Amphe-LiteTM

with Fiber OpticsAmphe-LiteTM

Commercial 38999, Series III typeconnector for higher performanceindustrial usage.

Offers 38999 type high performancecapabilities for severe environmentapplications, yet is cost effective enoughfor general duty and non-environmentaluse as well.

Threaded coupling (quickly, completelymates in one 360° turn of coupling nut).


Crimp termination.

• 3 shell styles, 59 insert patterns.• Twinax, coax, filter contacts and fiber optic

termini can be incorporated - ideal forcommunications equipment.

• Ground plane version and high decouplingversion available.

• Communications• Medical Equipment• Automotive


Operating temp. from –55°C to +125°C.Class F provides excellent EMI shielding.Class X provides a non-conductive finish.IP67 rating for environmental sealing.Composite shells resist severe corrosion.

Amphe-Lite is the industrial connector ofchoice for incorporating fiber optictermini for high speed data transfer.

Offers 38999 type high performancecapabilities for severe environmentapplications. Optical performance isoptimized ultilizing the ceramic ferruleand alignment sleeve features of thetermini.

Threaded coupling (quickly, completelymates in one 360° turn of coupling nut).


Crimp termination.

• Amphe-Lite styles and patterns.• Fiber optics and electrical hybrid

capabilities• Multi-mode size 16 and 20 straight

termini and 90 degree multi-mode size20 termini available.

• Communications• Medical Equipment• Automotive

Amphe-LIte operating performances.Typical insertion loss for 100/140 fiberwith .2 NA at 820 nm is .5 to .7 dB usingAir Gap (AG) polish techique.



Amphe-PowerTM withRADSOK® Technology RADSOK® HiLokTM

APPLICATION

COUPLING TYPE


TERMINATION TYPE

STANDARDS

OPTIONAL FEATURES

High amperage capability connector forthe most demanding industrial andtransportation applications.

Family consists of: P-Lok, GT and 5015(AC) connectors enhanced with RADSOKcontacts (hyperbolic, stamped gridconfiguration within the socket) thathandle up to 50% higher amperagesthan standard contacts.

Amphe-Power P-Lok is push-pull coupling;Amphe-Power GT is reverse bayonet;Amphe-Power 5015 (AC) is threaded

Amphe-Power connectors are all 5015type performance: Operating temp. from–55°C to +125°C. GT and 5015 stylesare IP67 rated in environmentalversions; P-Lok is IP65.

Crimp termination standard, with soldertype in development.

• 3 series offered - most shell styles avail.• RADSOK contacts currently available in

size 8 (69 amps), size 4 (120 amps) andsize 0 (250 amps).

• Hybrid arrangements with RADSOK andpower contacts tailored to meetcustomer needs.

TYPICAL MARKETS

Reference Brochure SL-391


• Power Generation, Petro-Chemical• Mass Transportation• Military Platforms

Designed to meet customer demand fortool-less but semi-permanent highamperage connectors.

Uses RADSOK high amperagetechnology. Often used as a replace-ment to the traditional threaded post andring terminal. Locking feature offers tool-less installation and requires a simpletool for removal.

Offered with 3.6mm (70A) and8.0mm (200A) RADSOKs.

Crimp termination or PCB/Busbar.

• Sockets available with range of wirecrimp barrels from 1/0 AWG to 12 AWG.Pins with wire crimp barrels or PCB/Busbar swage mount features.

• HiLok removal tool available.

• Telecom/Data Power Distribution


HiLok characterized by low connectionforce requirements of less than 15pounds, and high removal forcerequirements of greater than 50 pounds.

Current Amphe-Power lines support from50A to 500A continuous duty.


Amphe-PowerTM

Composite GTR

High amperage capability connector withhigh performance molded compositeconstruction.

Meets all specifications of GT Seriesand the additional feature of RADSOKsockets enables increased currentratings to 120A on individual contacts.Connectors are listed to UL/CUL 2238Standard, Control # 19VP.

Amphe-Power GT is reverse bayonetcoupling.

Operating temp. from –55°C to +125°C.IP67 performance is achieved withutilization of a standard PG adapterwatertight strain relief on the plug.Flammability rating is UL94V-0.

Screw termination.

• Current style is: Straight plug thathouses the RADSOK sockets and a boxmount receptacle with pin contacts;available in 32-AR pattern.

• 4 conductor or 5 conductor styles.• Meets a variety of cable sealing ranges.

• High Power Process Control• Server Applications

Currently available with 4 to 10 gagewire, 30A to 120A continuous duty.

Push to lock; tool to unlock.

Amphenol and Pyle Industrial provides reliable, proven and cost effective products that willmeet or exceed your industrial interconnect requirements.

Amphenol is a global leader in the connector marketplace. Amphenol operates qualitysystems that are certified to ISO9001:2000 by third party registrars.

Amphe-BaseAmphe-ComTM

and Amphe-Pd

APPLICATION

COUPLING TYPE


TERMINATION TYPE

STANDARDS

OPTIONAL FEATURES

Non-environmental power distributionconnector for power supply, battery,busbar and PCB.

Incorporates RADSOK high amperagesockets. Single position has 8mmRADSOK and 2-position molded typehas 3.6mm RADSOKs in the plug. andpin contacts in the receptacle.

Non-environmental 2-position moldedtype has TUV “touch-proof” safetyfeature.

• Amphe-Com available with a plastic capfo ran 8mm RADSOK.

• Amphe-PD receptacles available withmounting for power supply, battery,busbar or PCB.

TYPICAL MARKETS



• High Power Applications• Telecom/Datacom Power Distribution

2-Position molded type available inbusbar mount with swage pins for singleor multi-layer busbars, or box recep-tacle mount with pin-retention clip.

Crimp termination or PCB/Busbar.

RADSOK sockets support 50A to 70Acontinuous duty in Amphe-PD, and up to200A in a single pole.


Designed to provide 100 amps per pin ofpower to printed circuit board or bus barapplications.

Molded, one-piece strong but lightweightLexan® construction. Non-environmen-tal. Incorporates RADSOK highamperage sockets in size 6mm.

Molded shells are non-environmental,for general duty applications.

• Available in 2 or 3 position housings.

• Base Station Power Applications• Telecom/Datacom Power Distribuiton

One-handed mating/unmating and tool-less contact insertion. Molded-insymbols (+, -, and Ground).

Crimp termination.

6mm RADSOK rated for 120A.

• Current contact offering isRADSOK sockets in sizes: 2.4, 3.6,5.7, 6.0, 8.0, 9.1, 10.3, 14.0, and18.0. Consult Amphenol IndustrialOperations for size 12 availability.Amphenol can tailor the contactdesign to exact customer needs.

• May be used in P-Lok, GT and5015 (AC) Connectors.

• Connectors with RADSOK socketscan handle up to 50% higheramperages.


RADSOK® DESIGN• Socket cylinder within female

contact has several equally spacedlongitudinal beams twisted into ahyperbolic shape.

• As male pin in inserted, axial mem-bers in the female half deflect,imparting high current flow acrossthe connection with minimal voltageloss.

• The hyperbolic, stamped gridconfiguration ensures a large,coaxial, face-to-face surface areaengagement.

• Ideal for crimp termination applica-tions requiring repeated matingcycles and high current with lowmilli-volt drop.

RADSOK® HighAmperage Contacts

Twisted hyperbolicgrid ensures greatestpossible contact areaon the mating pin.


Star-Line®/Star-Line EX® Star-Lok®

APPLICATIONHeavy duty, for high power applications.Star-Line EX for harsh, potentiallyexplosive environments.

COUPLING TYPEDouble-lead Acme threads - completecoupling in one turn of coupling nut.


Up to high amperage of 1135 amps at1000V / AC or DC.

TERMINATION TYPESolder, crimp and pressure terminals.Circuit breaking power and control types.

STANDARDS

OPTIONAL FEATURES• 3 retention styles with captive contacts or

insertable/removable contacts.• 4 styles, over 150 inserts; several

varieties of backend hardware.• Star-Line EX can be terminated onto

unarmored/armored/sheathed cables builtto several popular standards.

Heavy duty, for similar applications asStar-Line series, but with reverse bayonetcoupling.

UL listed and CSA listed for circuitbreaking capability.

Spring-loaded reverse bayonet coupling -simple push to mate, and a simple eighthturn and pull to unmate.

Meets similar operating conditions asStar-Line series: Environmentally rated toIP67 ; Temp. range to 750°F.

Solder, crimp and pressure terminals.Circuit breaking power and control types.

• Same choices of inserts, contacts, toolingand hardware accessories as Star-Lineseries.

TYPICAL MARKETS

• Mass Transportation, Automotive• Power Generation, Petro-Chemical

Reference Catalog 12-054 Reference Catalog 12-054


Environ. rated to IP67. EX-IP68-8.Star-Line: oper. temp. range to 257°F;Star-Line EX: oper. temp. range to 750°FStar-Line EX is Cenelec certified for usein Zone1-IIc hazardous environment.Hard anodized shells resist corrosion.

• Mass Transportation• Automotive

Up to high amperage of 1135 amps at1000V / AC or DC.

UL listed and CSA listed for circuitbreaking capability.Equals or exceeds MIL-C-5015E and R specifications.SIRA Certification # 03ATEX1101X.

Reference Pyle Brochure LT-300

Provide liquid tight strain relief or cord,cable and flexible conduit.

Large family of cable pass-thru andstrain relief devices. UL listed and CSAcertified.

Theaded coupling for panel board ortheaded hub applications. Straight, 45degree and 90 degree styles.

Oil-resistant grommets and compres-sion nuts provide moisture sealing.Tapered conduit threads provide strongwater and oil-tight joint.

NA

• Large variety of attachment options:compression nut, mechanical clamp nutor basketweave grip styles.

• Panelboard adapters, conduit fittingboxes, cord grip handles.

• Lightweight aluminum or ferrous alloy formore abusive usage.

• Power/Control Equipment, Machine Tool• Communication Equipment

NA

Cord Grips

Amphenol’s product specialists jointly design with their customers to develop interconnectsystems that will meet their particular issues of product performance, safety and costeffectiveness. Please contact Amphenol for your industrial interconnection requirements.


Trans-Power 27 Pole Train-Line Freightmate

APPLICATION27 pole MU and communicationreceptacles and jumpers for railsystems.

Designed to Amtrak and APTA specifi-cations. Jumpers are keyed differentlyfrom other 27 pole jumpers to preventmis-mating.

COUPLING TYPESlip-fit, double-seated for environmentalprotection. Retention by receptaclecover or optional accessories.


Wire configuration, per Amtrak stan-dards, calls for 1-#10 wire, five shieldtwisted paris, and balance #12 wire.

TERMINATION TYPECrimp termination per Amtrak specifica-tions.

STANDARDS

OPTIONAL FEATURES • Receptacles supplied with or withoutleads.

• Lead length and housing painting will bedesigned to meet specific customerneeds.

Connector/cable assembly for ECP(electronically controlled pneumatic)braking systems.

Freightmate I style is AAR approved.Used on railway applications such ascommunication and tracking equipment,signaling equipment, end of train units.Meets ECP standard S-4210.

Operating temp. from –46°C to +125°C.

• Overmolded, environmental cableassembly.

• Qualified to ECP/AAR standards.• Available in customer specific lengths.

TYPICAL MARKETS


Raintight. Operating ambient tempera-ture –57° to +110° F.

Hermaphroditic breakaway coupling.

Factory terminated and overmolded.

Wire configuration: 2 #8 gage and1 #12 gage.

Head-end power connectors forcommercial rail systems.

Meets Amtrak specification D-77-24,APTA #RP-E-016.

• Available in varying lengths, and optionalcolor coding.

• Control only loop plugs available.• Integrally molded or repairable styles.

Reference Pyle Transportation Brochure

• Mass Transportation

Raintight. Operating ambient tempera-ture –57° to +110° F.

Crimp termination per Amtrak and APTAspecifications.

Slip-fit, double-seated for environmentalprotection. Retention by receptacle coveror optional accessories.

Up to 600 Volts, 400 Amps.

Reference Pyle Transportation BrochureContact Amphenol Industrial Operations for

further information

• Mass Transportation • Mass Transportation


APPLICATIONEnvironmentally sealed, rugged thermo-plastic interconnect. Developed for theheavy equipment marketplace.

COUPLING TYPEPush-pull coupling with secondary lock.


1.5mm RADSOK sockets rated at 7.5Amps (DC).

TERMINATION TYPECrimp, stamped and formed 1.5mmcontacts.

STANDARDS

OPTIONAL FEATURES• Silicone wire seals are also available in

Viton.

TYPICAL MARKETS

• Heavy Equipment


IP67. –40° / +125° C.

Amphenol qualification procedure andresults available upon request. Testedper IEC 512 and IEC 68-2.

Amphe-RC

Reference Prod. Sheet #191 Contact Amphenol Industrial Operations forfurther information

Commercial 5015 type. Design featuresand benefits of the environmentalAmphenol®/Matrix® MIL-C-5015 series.

Threaded coupling

Operating temp. from –55°C to +200°C.

Crimp rear release termination.

• 4 threaded shell styles, 172 insertpatterns.

• Aluminum shells or higher performancestainless steel shells.

• Heavy Equipment• Engine Control Components

IP67 for environmental sealing.Completely sealed with contact seals,gaskets, wire seals and insert-to-shellseals. Operating voltage to 3000 VAC(RMS) at sea level.

Offers the environmental benefits of theMIL-spec with crimp rear releasecontacts, but with some commercial/industrial cost effective features.

Tru-Loc®Specialty Molded

Connectors

Contact Amphenol Industrial Operations forfurther information

Capabilities in composite molding ofinterconnect solutions for power and/orharsh environment applications.

Bayonet, threaded and push-pull aresome of the coupling methods usedwhen providing custom interconnects.

Can utilize Amphenol’s RADSOK, Brush,Fiber Optic, RF or standard contacts.

Crimp, solder and pressure terminationare a few of the termination options.

• Options available per application.

• All types of Industrial Markets.

Specific environmental sealing,temperature rating and/or connectorplatings vary for each application.

Custom molded interconnects aredesigned to exceed customer specifiedstandards.

The Bristle Brush contact system aredesigned into rectangular connectors forapplications such as medical equipmentand process controls. Consult AmphenolIndustrial Operations for further informationon Brush contacts for commercial/industrialuse.Advantages of the Bristle Brush contactinclude:

• 70%-90% reduction in mating/unmatingforces from conventional pin-socketcontacts

• Proven durability and long contact life(20,000 + mating/unmating cycleswithout performance degradation)

• Multiple points of contact providesuperior electrical capability, stable, lowresistance – 20 milliohms max. and gastight contact sites.

• High contact count capability. Arrange-ments in rectangular connectors have10 to 100 contacts per row in 2, 3 and4 rows.

Other Industrial Products

• Flex circuitry is available for use withIndustrial Amphe-LiteTM seriesconnectors in flat or sculptured styles.Also can be used with MIL-C-5015 andMIL-C-26482 series connectors.

• Used for attachment of cylindricalconnectors to printed circuit boards.

• Flex circuitry creates a self-lockingterminal pad which eliminates the needfor an additional interconnect to thePCB.

• Sculptured® Flexible Circuits with built-interminations eliminate the failuresassociated with crimped or solder-oncontacts.

• Flex is designed to geometrically fit thetight space requirements within a unit.They are strong and rigid, yet highlyflexible.

• Cables can be designed with a customovermold to any Amphenol cylindricalconnector for almost any industrialapplication.

• Overmold seals to the rear of theconnector and to the cable jacketproviding moisture sealing.

• Variety of materials are available:Neoprene, Hypalon and others.

• Variety of lengths and configurationsare designed to customer specifica-tions.

• Personalization/special stamping (suchas company logo or cable part number)on the overmolds is available.

SurLok is a lug designed with a built-incontact which is able to connect tobusbars, PCB and cable assemblies.

• Able to replace a single or 2-hole lugand incorporate the RADSOK highamperage contact.

• Takes up less space, but offers higherampacity and reliability.

• Field crimpable and features a tool-less installation which allows for easeof use and installation/replacement.

• A small form factor design was kept inmind while designing the SurLok. Thisensures space management withoutgiving up any power.

• Designed for environmental moisturesealing with fused compression glasssealed inserts.

• Available in MIL-C-26482 and MIL-C-5015 connectors for industrialapplications.

• Receptacle mounting styles: boxmount, wall mount, jam nut, solderand weld mount.

• Leakage rate with hermetically sealedinserts is less than 1.0 x 10-6 cc/sec.at 15 psi differential.

• Solder cup, flat eyelet or PCBtermination. Contact counts from 2 to128 are available.

Low Mating ForceBrush Contact

Amphe-FlexTM Over-MoldedCables

SurLokTMIndustrial Hermetics

Engineering ExpertiseWe have the engineering resourcesto address most any industrialinterconnection design need. Ourknowledge of industrial applications insuch markets as motion control,communications, rail mass transit,heavy equipment, petrochemical andpower generation have made us aleader in interconnection solutions forthese industries.

Custom ConnectorManufacturingWe have the experience to designand manufacture a vast array ofinterconnect products to meet yourspecific application demands. Weassist in the design of products tomeet environmental stresses such asextreme temperatures, high insertionforces, vibration and most corrosiveenvironments.

Amphenol Solutionsby Design

Amphenol CorporationAmphenol Industrial Operations40-60 Delaware AvenueSidney, NY 13838-1395Phone: 607-563-5011 1-800-678-0141Fax: 607-563-5157Web: www.amphenol-industrial.com

Amphenol Industrial OperationsAmphenol Power Solutions34190 Riviera DriveFraser, MI 48026Phone: 586-294-7400Fax: 586-294-7402www.radsok.com

Amphenol Canada20 Melford DriveScarborough, ON M1B 2X6 CanadaPhone: 416-291-4401Telex: 065 25210Fax: 416-292-0647

SALES OFFICESAmphenol CorporationAmphenol AerospaceAmphenol Industrial Operations23276 South Pointe Drive, Suite 113Laguna Hills, CA 92653Phone: 949-855-4454 1-800-678-0141Fax: 949-855-9115

AUTHORIZED INDUSTRIALDISTRIBUTORSCorporate HeadquartersALPHABETICAL LISTINGValue Added Assembly Distributors:Arrow Electronics Englewood, CO800-388-2277

Avnet EMG Phoenix, AZ800-332-8638

PEI Genesis Philadelphia, PA800-523-0727

Powell Electronics Philadelphia, PA800-235-7880

TTI Inc. Fort Worth, TX800-225-5884

Commercial/Industrial DistributorsAllied Electronics Fort Worth, TX800-433-5700

Astrex Plainview, NY800-633-6360

Carlton-Bates Co. Little Rock, AR800-482-9313

Digi-Key Thief River Falls, MN800-344-4539

Electronic Connector Chicago, IL800-742-3262

Electro Enterprises Oklahoma City, OK800-324-6591

Electronic Expeditors Waukesha, WI800-558-8547

Electro Sonic Inc. Ontario, Canada800-56-SONIC/416-494-1555

DAC GroupForce ElectronicsHeilind Electronics Wilmington, MA866-253-7848

J&K Connectors Seattle, WA206-674-3300

Madison Electronics Fraser, MI800-521-0616

Mouser Electronics Mansfield, TX800-346-6873

Newark Electronics Chicago, IL800-263-9275

Nies Electronic Frankfurt, Germany(06109)7364-0

RS Electronics Livonia, MI800-366-7750

Sager Electronics Hingham, MA781-740-5213

Schuster Elect. Cincinnati, OH800-877-6875

Simcona Rochester, NY585-328-3230

Disadvantaged/Minority Distributors:Cherokee Nation Dist. Stilwell, OK918-696-2777

JRH Electronics Marlton, NJ800-467-9309

Pyle-National Industrial Distributors:Argo International New Orleans, LA504-733-4500 or 800-242-2746

Dutrol International Ontario, Canada905-792-2875

Gaffney-Kroese Elect. Rahway, NJ732-381-0500

Geophysical ElectricalSupply Company Houston, TX713-645-5999

Hillcrest Enterprises Ashland, VA800-848-3106 / 804-798-8390

ITI Marine & OilfieldPTE. LTD. Singapore(65) 6266-6666

Norton ElectricWholesale Los Angeles, CA323-222-7181

Offshore Marine Houston, TX800-506-9473

PEI Genesis Philadelphia, PA800-523-0727

Steck Connections Ontario, Canada905-608-2444

Steiner Electric Elk Grove Village, IL847-956-3700

Technor Asia Norway47 51 84 4100

Wholesale Electric Houston, TX713-748-6100

INTERNATIONALLatin AmericaARGENTINAAmphenol ArgentinaAvenida Callao 9302nd floor Office B PlazaC1023AAP Buenos Aires, ArgentinaPhone: (54 11) 48 15 68 86Fax: (54 11) 48 14 57 79E-mail:[email protected]

BRAZILAmphenol do Brasil Ltda.Rua Diogo Moreira 132CEP 05423-010Sao Paulo - SP, BrazilPhone: (55-11) 3815.1003Fax: (55-11) 3815.1629E-mail: [email protected]

MEXICOAmphenol MexicoProlongacion Reforma 61-6 B2Col. Paseo de las LomasC.P. 01330 Mexico D.F., MexicoPhone: (52-55) 5258.9984Fax: (52-55) 5081.6890E-mail: [email protected]

Middle East / AfricaISRAELBar-Tec Ltd.3 Hagavish St., P.O.B. 279Kfir-Barkan Bldg., East Industrial ZoneKfar Sava 44102, IsraelPhone: (972-9) 764.4100Fax: (972-9) 7674324E-mail: www.bar-tec.com

SOUTH AFRICAAmphenol South Africa30 Impapa RoadChislehurstonSandton, 2146, South AfricaTel: (27-11) 783-9517Fax: (27-11) 783-9519E-mail: [email protected]

TURKEYAmphenol TurkiyeAyazaga Mah. Meydan Sk. No. 28Beybi Giz Plaza, Kat. 2634396 Maslak/IstanbulPhone: 90 (0212) 335 25 01Fax: 90 (0212) 335 25 00

Asia / PacificAUSTRALIAAmphenol Australia LTD2 Fiveways Blvd.Melbourne, Victoria 3173AustraliaPhone: 613 8796 8888Fax: 613 8796 8801E-mail: [email protected]

CHINAAmphenol Shanghai Office14/D, Dong Zhan Commercial Building,669 Beijing Road West,Shanghai, 200041, ChinaPhone: (86) 21 6267 5566Fax: (86) 21 6272 7587

HONG KONGAmphenol East Asia Ltd.26/F Railway Plaza39 Chatham Rd. SouthKowloon, Hong KongPhone: (852) 2691 1774Fax: (852) 9090 5325

INDIAAmphetronix Interconnect India,Pvt, Ltd.105 Bhosari Industrial AreaPune, 411 026, IndiaPhone: (91-20) 27120 481Fax: (91-20) 27120 581E-mail: [email protected]

JAPANAmphenol Japan Mil-Aero& Industrial471-1, Deba, Ritto-cityShiga 520-3041, JapanPhone: 81-77553-8501Fax: 81-77551-2200

KOREAAmphenol Daeshin#558 SoSa, SongNaeBucheon City, Kyungki-DoKorea 420-130Phone: 82-32-680-3800Fax: 82-32-673-2507

SINGAPOREAmphenol East Asia, Ltd.300 Beach Road#34-06 The ConcourseSingapore 199555Phone: 65-6294-2128Fax: 65-6294-3522

TAIWANAmphenol TaiwanNo. 116, Lane 956, Zhong Shan Rd.Taoyuan City, Taiwan, R.O.C. 330Phone: (886-3) 379-5677Fax: (886-3) 360-7259

EuropeAUSTRIA & EASTERN EUROPEAmphenol Gesellschaft mbHP.O. Box 63, 3990 DB HoutonThe NetherlandsPhone: 31 30 6358000Fax: 31 30 6377899E-mail: [email protected]

ENGLANDAmphenol LimitedThanet Way, WhitstableKent CT5 3JF, United KingdomPhone: (44-1-227) 773200Fax: (44-1-227) 276571Email: [email protected]

FRANCEAmphenol SocapexPromenade de l’Arve, BP29Thyez 74301 948 Cedex, FrancePhone: (33-4) 50892800Fax: (33-4) 5096-1941ASF CBV TX

FRANCEAmphenol-Air LB29, Voie d’Y VoisF-00810 Blagny, FrancePhone: 33-3-2422-7849Fax: 33-3-2422-7845

GERMANYAmphenol-Tuchel Elect. GmbHAugust-Haeusser Strasse 10Postfach 111074001 Heilbronn, GermanyPhone: (49-7131) 929 0Fax: (49-7131) 929 414

GERMANYAmphenol-Air LB GmbHAm Kleibahnhof 4D-66740 Saarlouis, GermanyPhone: (49-6831) 9810-87Fax: (49-6831) 9810-30

ITALYAmphenol Italia S.p.A.Via Barbaiana 520020 Lainate (Milano), ItalyPhone: 39-02-932541Fax: 39-02-93254444E-mail: [email protected]

BENELUXAmphenol European Sales Oper.Amphenol Benelux BVP. O. Box 63, 3990 DB HoutenThe NetherlandsPhone: 31-30-6358000Fax: 31-30-6377034E-mail: [email protected]

SPAIN & PORTUGALAmphenol IbericaEdificio “Burgosol” - Oficina No. 55c/Comunidad de Madrid, 35-bis,28230 Las Rozas, Madrid, SpainPhone: 34-91-6407303Fax: 34-91-6407307E-mail: [email protected]

SWITZERLANDAmphenol SwitzerlandP.O. Box 63, 3990 DB Houton,The NetherlandsPhone: 31 30 6358000Fax: 31 30 6377899E-mail: info @amphenol-nl.com

Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. Allstatements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of anykind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such useis free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or thatother measures may not be required. Specifications are typical and may not apply to all connectors.

© 2005 Amphenol Corp. Printed in U.S.A. Proforma Associates 1/2005

Documents

SL 381 Catolog