1. Place the cover over the lifting point of the skip. 2. With the lock bolt in the unlocked position, insert it through the cover and lock it into the end cup by turning the key a quarter turn clockwise. Remove the key. 3. To unlock, insert the key turn it a quarter turn anti clockwise and withdraw the lock from the cover. SK15 General Skip Lock Fitting Instructions Fitting We have taken every care in the design and manufacture of this security device and we believe that it is an effective deterrent. However we cannot guarantee that it will resist the efforts of the most determined thief, and as such we do not accept any liability for loss or damage caused by theft, vandalism or other illegal activity against property to which this this device is fitted. The SK15 Skip Lock is designed to fit skip lugs as dimensioned above.

SK15 General Skip Lock (2) - Bulldog · 2018-02-08 · SK15 General Skip Lock Fitting Instructions Bulldog Security Products Units 1 - 4 Stretton Road, Much Wenlock, Shropshire, TF13

Download PDF Report

Upload
others
View
3
Download
0

Embed Size (px)

Citation preview

Page 1: SK15 General Skip Lock (2) - Bulldog · 2018-02-08 · SK15 General Skip Lock Fitting Instructions Bulldog Security Products Units 1 - 4 Stretton Road, Much Wenlock, Shropshire, TF13

1. Place the cover over the lifting point ofthe skip.

2. With the lock bolt in the unlockedposition, insert it through the cover andlock it into the end cup by turning thekey a quarter turn clockwise. Removethe key.

Lock Lubrication.IMPORTANT - To ensure free movement of the lock,spray lock mechanism & ball bearings with WD40(or equivalent) minimum every four months.

3. To unlock, insert the key turn it aquarter turn anti clockwise andwithdraw the lock from the cover.

SK15 General Skip Lock Fitting Instructions

Bulldog Security ProductsUnits 1 - 4 Stretton Road, Much Wenlock, Shropshire,TF13 6DH.Tel: 01952 728171 Fax: 01952 728117

Fitting

We have taken every care in the design and manufacture of this security device and we believe that it is an effectivedeterrent. However we cannot guarantee that it will resist the efforts of the most determined thief, and as such we donot accept any liability for loss or damage caused by theft, vandalism or other illegal activity against property to whichthis this device is fitted.

The SK15 Skip Lock is designed to fitskip lugs as dimensioned above.