SITE/ROADWAY BE LED / AE LED Era Bell/Era Acorn LEDkimlighting.s3.amazonaws.com/pdf/kl_aebeled_lit.pdf · · 2011-09-15SITE/ROADWAY BE LED / AE LED Era ® Bell/Era ... Era ® Bell/Era

KIM LIGHTING 1Lenis eumsan esent lutat lam KI KIK M M LLL LLIIGIGGGGGHHHHHHGHHHHHHHHGHHGHHHHeumeummmsssasaanannns n eeeeeeeeeeeeeeeeeeeeee

The Next Generation of LED Site Lighting

SITE/ROADWAYBE LED / AE LED

Era® Bell/Era® Acorn LED

Era Bell LED

Era Acorn LED

Kim Lighting is known throughout the world as the premier designer and manufacturer of quality, high performance, and architecturally relevant outdoor lighting solutions. Kim Lighting is a division of Hubbell Lighting, Inc.

Contents:Exclusive Optical Technology 2Thermal Management System 4Lumen Performance 5Design Innovation 6Pole Mounting Confi gurations 7HID to LED Upgrade 8Even, Uniform Distribution 9Ordering Information 10Specifi cations & Warranty 12Mounting Arm Dimensions 13Photometry and BUG Ratings 14The Future is Today 16

www.kimlighting.com | KIM LIGHTING 1

The Next Generation of LED Site LightingKim Lighting has reinvented the acorn luminaire by adding state-of-the-art MicroEmitter™ LED technology to Era® Bell and Era® Acorn ensuring these heritage luminaires meet all the performance demands of today’s outdoor lighting.

The Era Bell luminaire utilizes a fl at glass lens for zero uplight performance, satisfying the most demanding light control specifi cations. The Era® Acorn luminaire retains the traditional classic acorn shape in a clear material that allows full optical performance with very low brightness.

Era Acorn and Era Bell are true modern-day performance luminaires in classic confi gurations.

This is LED site lighting perfection. This is Kim Lighting.

LED’S RECESSED INTOFIXTURE HOUSING

Zero UplightZero Uplight

Glare-Free Zone

Glare-Free Zone

Glass LensDurable, clear tempered

fl at glass lens. Polycarbonate and convex glass lenses also available.

Era Bell LED shown.

Sealed EmitterDeckTM

Assembly

Canted MicroEmitterTM

DesignEach of the Era® Bell and Era® Acorn LED Emitter refl ectors are precisely aimed at optimal angles for maximum reach and uniform illumination.

Achieving Zero UplightThe Era Bell MicroEmitter

refl ectors are recessed into the fi xture housing for shielding and

zero uplight above the horizontal plane with fl at glass lens.

KIM LIGHTING MICROEMITTER MODULE

PATENT PENDING

2 KIM LIGHTING | www.kimlighting.com

Era Bell LED luminaires meet requirements for applications where light pollution or light trespass may be a concern. Era Bell LED’s unique optical system and fl at glass lens produces zero light above 90°.

Dark Sky Compliance

180°

UH

UL

FVH 90° = 2.2%

FL 30° = 7.5%

FM 60° = 42.0%

FH 80° = 40.8%

0°

100°100° FORWARDLIGHT5353 lm. 92.5%

UP LIGHT0 lm. 0%

Era Bell 21"

Type IV - 120 LEDShown

BACKLIGHT

432 lm. 7.5%

BVH 90° = 0.2%

BH 80° = 1.8%

BM 60° = 4.0%

BL 30° = 1.4%

Achieve any IES distribution, as well as new unique and custom distributions, with the incredible fl exibility of Kim Lighting’s MicroEmitter

TM

modules within each replaceable and upgradeable Era Bell/Era Acorn LED EmitterDeck assembly. Because each LED board is optically controlled separately, designers have the fl exibility to specify distributions specifi c to their project’s criteria.

Imagine Any Distribution

Type IV

Type LLeft

Type II Type I

Type VSquare

Type III

Type RRight

Exclusive Optical Technology

/

KIM LIGHTING 1Lenis eumsan esent lutat lam


/

The above illustration is a BIM project example using Kim Lighting’s .rfa and .ies formatted fi les. To create your own layout using Kim Lighting’s technical data, register at www.kimlighting.com and download Era Bell/Acorn LED’s design fi les.

Nadir DumpZone

DA

RK

ZO

NE

DA

RK

ZO

NE

Nadir DumpZone

60°

Competitor LED Distribution Maximum to Minimum Ratio = (6:1)

Avoid Nadir DumpEra® Bell and Era® Acorn LED eliminate the staccato of glare and hot spots experienced by humans as they travel through vehicular and pedestrian zones. In contrast, other optically compromised products create a striped-street strobe effect with alternating regions of extreme brightness and darkness, and in turn, disregarding the importance of uniformity creates disability glare. The resulting human experience is annoying at best, but can be potentially hazardous in heavy traffi c environments.

Air Flow

Convection

Conductionto Housing

Era Acorn LED shown.


The Era® Bell and Era® Acorn LED luminaires employ two distinct but complimentary methods to manage the life-limiting heat produced by the LED diode. Both conduction and convection are used to disperse heat, thereby maintaining diode performance and long life. Heat is drawn away from the housing chamber and dispersed into the free air around the luminaire. Additionally, each MicroEmitter™ module incorporates a solid aluminum heat sink, which is mechanically secured to the EmitterDeck™. The EmitterDeck is composed of a heavy gauge aluminum carrier plate/spinning to dissipate heat to the outside environment.

AUTOMATIC THERMAL SELF-MONITORING AND ADJUSTMENT

Each EmitterDeck incorporates two temperature sensors located at the hottest locations of the backside of the deck. Each sensor sends temperature readings every 30 seconds to Kim Lighting’s exclusive LifeShield® Protection System. In extreme conditions, LifeShield detects above tolerance temperature and automatically and temporarily lowers the current to the system to preserve diode life. Lumen output is restored to full capacity once the temperature is stabilized to within acceptable limits. The LifeShield Protection System provides consistent performance with minimal output reduction in extreme and fl uctuating environmental conditions.

Dual Heat Management with Exclusive LifeShield® Protection System

Thermal Management System

Signature Cooling Fins

/

LifeShieldProtection System

®



Era® Bell/Era® Acorn LED’s exclusive LifeShield® Protection System controls lumen depreciation in extreme and fl uctuating environments to preserve operational lifespan. Always consult www.kimlighting.com for the most current performance data.

Luminaire Output at Outdoor Ambient Temperatures120

Average Night Time / Outdoor Ambient Temperature

% o

f Rat

ed L

umin

aire

Lum

ens

110

100

90

70

80

20°C 68°F

25°C 77°F

30°C 86°F

35°C 122°F

40°C 95°F

45°C104°F

50°C122°F

-20°C -4°F

-10°C 14°F

0°C32°F

10°C 50°F

55°C132°F

60°C140°F

65°C149°F

70°C158°F

Stabilizes Output Due to Exclusive LifeShield

Protection System

Haz

ardo

us T

herm

al E

nvir

onm

ent

Luminaire Lumen Loss by Hours of Operation

20

30

40

50

60

70

80

90

100

110

Lum

en P

erce

ntag

e

10000 10000020000 30000 40000 9000060000 70000 8000050000

Outdoor Temperature at 10°C/50°F. Temperature is based on continual average, annual assumptions.

Outdoor Temperature at 40°C/104°F. Temperature is based on continual average, annual assumptions.

Hours of Operation

L-70

(INDICATES STANDARD IES FORMATTING)

Actual Test Report

Kim Lighting’s photometric data for Era Bell/Era Acorn LED luminaires is tested to the IESNA LM-79-2008 standard, and Kim Lighting only uses LEDs that are tested to the IESNA LM-80-2008 standard. When evaluating photometric data for LED luminaires, look for a negative one (-1) in the lumen output space of the photometric data fi le to assure compliance with LM-79-2008.

Test reports on page 14 refl ect photometry performed under LM-79-2008 standards.

LM-79-2008 Compliance

Lumen Performance

/

Notes: 1. Lumen loss stabilization is a result of Kim Lighting’s MicroEmitter luminaires exclusive

LifeShield Protection System and Dual Heat Management.

2 The LifeShield Protection System will lower the current to the LEDs signifi cantly if the

luminaire is exposed to direct heat (sun) or excessive abnormal conditions.

3. Luminaire Lumen Loss assumptions are based on LM-80 results and an actual outdoor product

testing based upon 5100K CCT, 350mA drive current, 25°C lab ambient and cathode

temperature at 85°C. Assumptions past 6,000 hours are interpolated.

4. Cathode temperature baseline is at 85°C. If cathode temperature increases during ambient

changes and abnormal environment conditions, % of rated lumens will slightly decrease.

5. Outdoor ambient temperatures are assumed SITU averages by geographic region.

6. As Solid State Lighting technology and thermal management systems continually advance, lumen loss projections are subject to improvement.


EmitterDeckTM and Electronic Driver Assembly

Connect temperature sensor wiring from EmitterDeck to LifeShield Protection System on electronic driver assembly.

Open lens frame with fl athead screw driver and hang Era Bell/Era Acorn LED EmitterDeck. Insert electronic driver assembly into upper part of housing and lock into place. Tighten with fl athead screw driver.

Connect electrical quick connect from EmitterDeck to electronic driver assembly.

Swing EmitterDeck into place and tighten fl athead screw. Raise and close lens frame.

The Era® Bell and Era® Acorn LED EmitterDeck and electronic driver assembly are modularly designed for installation in just minutes. Individual MicroEmitters are also easily fi eld replaceable.

Die-Cast Aluminum Lens Frame

Electronic Driver with 0-10V Dimming Interface through LifeShield

LifeShield®

Protection Systemwith “Dim” Connection Port

Surge Protector

One-piece Silicone Gasket

Signature Cooling Fins

Tempered Glass Lens

ReplaceableMicroEmitterTM Modules

AluminumEmitterDeckTM

Design Innovation

/



3. 7.

2.

4.

1.1.

AvailableConfigurations

1A 2B

3Y 4C

AvailableConfigurations

1A 2B

3Y 4C

Heavy Cast Arm Heavy Cast Arm

HA03S/HA03LPost Top Swept Cast Arm

HA11S/HA11LSide Pole Swept Cast Arm

See page 13 for other Support Arm Options.

On all poles, the pole steptransition is reinforced andfully welded.

On the Post Top Swept CastArm, the head is bolted with two large stainless steel studs.

On the Post Top Swept CastArm, the arm is attached to acast pole-top fitter with large stainless steel bolts.

On the Side Pole Swept CastArm, the arm is attached to the pole with large stainless steel bolts.

3.1. 2. 4.

Pole Mounting Confi gurations

/

8 KIM LIGHTING | www.kimlighting.com 1 Assumes HID lamp replacement every three years including labor.

EmitterDeck Upgradeability Existing Kim Era® Bell and Era® Acorn HID installations can now be upgraded to cutting edge LED technology. The Upgrade Kits install in just minutes providing a value-added upgrade solution. As a Kim Lighting product, the upgrade kit preserves ETL listing to UL standards and manufacturer’s warranty… something that third party retrofi ts cannot do. Kim Lighting’s MicroEmitter based LED luminaires can also be upgraded to the latest LED technology as it evolves over time. Replacement EmitterDecks featuring the latest LED technology are available exclusively from Kim Lighting.

Description Total Luminaire Wattage

Energy Savings (Watt)

Energy Savings (Kw)

Savings Per Yr @ 11 Hrs per night

@ $0.10 Per Kwh1

BE/AE21 LED 133 - - -

BE/AE21 150W PMH 185 52 .052 $ 20.88

BE/AE21 200W PMH 240 107 .107 $ 42.96

BE/AE21 250W PMH 291 159 .159 $ 63.84

BE/AE21 150W HPS 188 55 .055 $ 22.08

BE/AE21 200W HPS 240 107 .107 $ 42.96

BE/AE21 250W HPS 295 162 .162 $ 65.04

HID to LED Upgrade

Scan code to view HID to LED

Upgrade video

QR

CO

DE

/


20 '

20 '

1.58 1.881.86 1.86 1.86 1.701.881.58 1.58

1.25 1.25 1.251.311.47 1.47 1.311.47 1.47

1.15 1.44 1.44.801.44 1.44.80 1.15 1.15

20 '


Era® Bell and Era® Acorn LED luminaires are perfect for upgrade projects because communities can safely utilize existing pole installations and still maintain uniform illumination between luminaires. Compare the Era Bell and Era Acorn LED low max-to-min uniformity ratio to other LED systems, and the difference is clear.

Footcandle readings at one mounting height forward for Era Bell BE213-120L5K.

60' Spacing

80' Spacing

100' Spacing

Criteria: Mounting height is 20', on a street width of 35', and spacing is 100' apart. Luminaires are staggered on each side of the street. Mean Lumens and photopic equipment were used for this data.

Uniform, IlluminationKim Lighting’s patent pending MicroEmitter™ Technology features unparalleled ability to capture and harness light using an optical system that shapes, points and tightly controls the beam of individual clusters of LEDs within independent MicroEmitter modules. The result places light where it is needed, creating superior uniformity by evenly distributing horizontal footcandles and, in turn, reducing energy waste.

Description Wattage Avg. FC Max. FC Min. FC Avg. to Min. Max. to Min.BE/AE21 LED 133 2.07 2.95 .96 2.16:1 3.07:1

BE/AE21 150W PMH 185 2.74 4.51 .97 2.82:1 4.65:1BE/AE21 200W PMH 240 3.30 5.44 1.16 2.85:1 4.69:1BE/AE21 250W PMH 291 3.82 6.30 1.35 2.83:1 4.67:1

BE/AE21 150W HPS 188 2.90 4.19 1.25 2.32:1 3.35:1

BE/AE21 200W HPS 240 4.10 5.93 1.76 2.33:1 3.37:1

BE/AE21 250W HPS 295 5.21 7.55 2.25 2.32:1 3.36:1

Even, Uniform Distribution

/

Era® Bell/Era® Acorn LED


Ordering Example:

1 Mounting: WallMount

2 Fixture: Catalog no. designates fi xture and light distribution.

Plan View:

1A / AE173 / 60L5K120 / LG / A-30 / HSAS14-534188A - HA01S / LG

5K 120

1 2 3 4 5-9 10 11-12

3 Electrical Module:

4 Finish: Super TGIC powder coat paint over titanated zirconium conversion coating.

Color: Stealth Gray Light Gray Platinum Silver White Black Dark Bronze Custom Colors Consult your KimCat. No.: SG LG PS WH BL DB CC Lighting representative

for custom colors.

SOURCE 60L = 17", 60 LED’s 120L = 21", 120 LED’s

60L

VOLTAGE120 = 120V208 = 208V240 = 240V

277 = 277V347 = 347V2

480 = 480V2

COLORTEMPERATURE 1

3K = 3500K5K = 5100K2K = 580nm Amber

BE/AE Cat. No. : 1A 2B 3Y 4C 1W

1 4300K and 6500K are also available on an “Engineered to Order” basis.2 Due to current unavailability of 347V and 480V drivers, specifi cation of these voltages shall feature an integral step-down transformer.

HOUSINGBE = Era BellAE = Era Acorn

SIZE17 = 17", 60 LED’s21 = 21", 120 LED’s

DISTRIBUTION1 = Type I Full Cutoff2 = Type II Full Cutoff3 = Type III Full Cutoff4 = Type IV Full Cutoff5 = Type V Square Full Cutoff

R = Type R Right Full CutoffL = Type L Left Full Cutoff

AE 17 3

Type IVForwardThrow

Type LLeft

Type1 Type VSquare

Type III Type RRight

Light Distribution

Type II

NOTE: 1A, 2B, 3Y, and 4C mounting arms are part of the Pole Assembly or Slipfitter Mount. 1W Wall Mount arm not included and must be ordered separately. See page 13 for Era Bell/Era Acorn fixture and arm EPA and dimensions.

5 Optional Photocell: One per fixture required.

Line Volts: 120V 208V 240V 277V 480V 347V

Cat. No.: A-30 A-31 A-32 A-33 A-34 A-35

6 Optional Convex Glass Lens: Era Bell only.

Cat. No.: CGL The F" thick clear convex tempered glass lens replaces the standard flat glass lens. Provides increased lens presence and provides a subtle improvement in uniformity where pole spacing is extreme.

7 Optional Poly carbonate Lens: Cat. No.: LS One-piece, clear, UV stabilized polycarbonate, fully gasketed, lens replacing the standard tempered glass lens.

CAUTION: use only when vandalism is anticipated to be high. Useful life is limited by UV discoloration from sunlight.

Photocell

ConvexLens

PolycarbonateLens

Era Acorn

Era Acorn

Era Bell

Era Bell

Era Bell

Era AcornAE

Era BellBE


/


Ordering Information


10 Poles:

8 Optional Fusing:

Refer to Kim Lighting’s Arms & Poles Selection Guide for ordering and specification information.

12 Optional Arm Finial: Cat. No.: HAF2 Traditional style finial available to close off mounting hub opposite the fixture. Available only on selected Era arms. Refer to Kim Arms & Poles Selection Guide for a complete selection of heritage style finials.

Single Fuse

Line Volts: 120V 208V 240V 277V 347V 480V

Cat. No.: SF DF DF SF SF DF

11 Optional Support Arm: NOTE: Wall mount arm is not included and must be ordered separately. Refer to Kim Lighting’s Arms & Poles Selection Guide for details and additional information on arm, tenon and wall mounting.See p. 13 for mounting arm dimensions.

Ordering example: 1A/AE173/60L5K277/HSAS14-534188A-HA03S

9 Optional Dimming Controls: The Era® Bell/Era® Acorn LED driver features a 0-10V dimming interface on the LifeShield® device, allowing 0-100% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting will advise availability of complete control packages, once they have been tested and exceed Kim’s high quality standards.

Cat. No.: HA01S/HA01L HA02S/HA02L HA03S/HA03L HA11S/HA11L HA12S/HA12L

Arm Mount x x x x x

Tenon Mount x x x x x

Wall Mount — x — x x

Con

figur

atio

nC

onfig

urat

ion

Arm Finial

Cat. No.: HA31S/HA31L HA33S/HA33L HA35S/HA35L HA37S/HA37L HA38S/HA38L

Arm Mount x x x x x

Tenon Mount x x x x x

Wall Mount x x x x x


/

AE17

AE21

17J"(438 mm)

22E"(582 mm)

15C"(390 mm)

21"(533 mm)

28H"(728 mm)

19M"(490 mm)

BE17 BE21

17J"(438 mm)

17B"(435 mm)

15C"(391 mm)

21"(533 mm)

21K"(546 mm)

19M"(490 mm)

17J"(438 mm)

15C"(391 mm)

21"(533.4 mm)

19M"(490 mm)

Era® Acorn AE17-LEDSmall Housing, 60 LEDsMaximum System Watts = 73 W

Era® Bell BE17-LEDSmall Housing, 60 LEDsMaximum System Watts = 73 W

Era Acorn AE21-LEDLarge Housing, 120 LEDsMaximum System Watts = 140 W

Era Bell BE21-LEDLarge Housing, 120 LEDsMaximum System Watts = 140 W


HOUSING: One-piece, die-cast low copper (<0.6% Cu) aluminum alloy component with integral cooling fi ns.LENS FRAME AND LENS: One-piece, die-cast low copper (<0.6% Cu) aluminum alloy. Stainless steel hinges provided for attachment to housing. A single stainless steel thumb latch is provided for toolless entry and is concealed from normal view. BE: The 3/16" thick clear fl at lens or convex tempered glass lens (optional polycarbonate) seals against the refl ector fl ange by a one-piece extruded silicone gasket with fused seam, to produce a fully sealed optical chamber (IP66). AE: The high temperature rated 3/16" thick clear injection molded acrylic acorn enclosure, UV stabilized (optional polycarbonate) seals against the refl ector fl ange by a one-piece extruded sili-cone gasket with fused seam, to produce a fully sealed optical chamber (IP66).MOUNTING: Stainless steel bolts are provided to attach the luminaire to mounting arms. ELECTRONIC MODULE: All electrical components are UL and CSA recognized, mounted on a single plate and factory prewired with quick-disconnect plugs. Module includes a driver, LifeShield® temperature control device and surge protector. Electrical module attaches to housing with key hole slots, accessible by opening the lens frame and removing optical module. Driver is rated for -40°F starting and has a 0-10V dimming interface on the LifeShield device for multi-level illumination options.OPTICAL MODULE: Precision, replaceable MicroEmitter™ refl ectors are positioned to achieve directional control toward desired task. The entire EmitterDeck™ mounting assembly fastens to housing as a one-piece module.

FINISH/COLOR: TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. WARRANTY: Kim Lighting warrants Era Bell/Era Acorn LED products (“Product(s)”) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of fi ve (5) years for metal parts, (ii) a period of ten (10) years for exterior housing paint fi nish(s), (iii) a period of six (6) years for LED Light Engines (MicroEmitter refl ectors) and, (iv) a period of fi ve (5) years for LED power components (LED Driver, LifeShield temperature control device, surge protector), from the date of sale of such goods to the buyer as specifi ed in Kim Lighting shipment documents for each product. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim Lighting’s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations.CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious injury.

1 Suitable for wet locations Kim Lighting reserves the right to change specifi cations without notice.

LISTINGS AND RATINGS

ETL to UL Standards 1598 & 87501 CE 25° C Ambient

Specifi cations

/


HA31 – Side Pole Ribbon Arm with Top Scroll

HA01 – Post Top Crook Arm(Drawing not to scale)

25D" (651 mm)

4"(102 mm)

46K" (1181 mm)

34K"(876 mm)

3C"(86 mm)

19E"(505 mm)

LargeSmall

Fixture & Arm EPA 1A 2B 3Y 4CHA01S (Small) 1.1 - - -HA01L (Large) 1.8 - - -

LargeSmall

Fixture & Arm EPA 1A 2B 3Y 4C 1WHA02S (Small) 1.3 2.6 3.5 3.9 -HA02L (Large) 1.9 3.8 5.1 5.9 -

68K" (1740 mm)

48"(1220 mm)

21L"(553 mm)

10"(254 mm)

7K"(191 mm)

16J"(413 mm)

51J"(1302 mm)

36K"(927 mm)

Small

Fixture & Arm EPA 1A 2B 3Y 4C HA03S (Small) 1.3 2.6 3.4 3.7 HA03L (Large) 1.9 3.8 5.0 5.5

Large

28C" (721 mm)

9C"(238 mm)

4"(102 mm)21C"

(543 mm)

7L"(197 mm)

3J"(83 mm)

HA11 – Side Pole Swept Cast Arm

HA02 – Side Pole Crook Arm(Drawing not to scale)

HA12 – Side Pole S-Shaped Up Cast Arm

HA03 – Post Top Swept Cast Arm

Small


Large25C"(645 mm)

27"(686 mm)

13K"(343 mm)

28K"(724 mm) 3D"

(86 mm)

19H"(500 mm)

21"(533 mm)

11"(279 mm)

22L"(578 mm)

2E"(73 mm)

Small


Large

19K"(495 mm)

21"(533 mm)

7G"(188.9 mm)

21"(533 mm)

3K"(89 mm)

15L"(400 mm)

17"(432 mm)

6"(152 mm)

17"(432 mm)

2O"(72 mm)

Small


Large

16C"(416 mm)

8O"(224 mm)

24L"(629 mm)

26K"(673.1 mm)

12E(327 mm)

6E"(175 mm)

20"(508 mm)

21K"(546.1 mm)

HA33 – Side Pole Ribbon Arm with Top Gusset

HA35 – Side Pole Ribbon Arm with Top Brace Drawing not to scale

HA37 – Side Pole Ribbon Arm with Top Brace and Bottom Scroll (Drawing not to scale)

HA38 – Side Pole Ribbon Arm with Top Brace and Bottom Gusset (Drawing not to scale)

Wall Mount Plate – for HA11, HA12, HA31, HA33, HA35, HA37 and HA38 mounting arm

Wall Mount Plate – for HA02mounting arm

Small


Large

8O"(224 mm)

17F"(437 mm)

24L"(629 mm)

26K"(673.1 mm)

13K"(343 mm)

6E"(175 mm)

20"(508 mm)

21K"(546 mm)

Small


Large

6E"(175 mm)

22E"

(582 mm)

20"(508 mm)

21K"(546.1 mm)

8O"(224 mm)28D"

(728 mm)

24L"(629 mm)

26K"(673.1 mm)

Small


Large

6E"(175 mm)30I"

(785 mm)

21K"(546 mm)

20"(508 mm)

8O"(224 mm)

38K"(978 mm)

24L"(629 mm)

26K"(673 mm)

Small

6E"(175 mm)31D"

(803 mm)

21K"

(546.1 mm)

20"(508 mm)


Large

8O"(224 mm)39C"

(1000 mm)

26K"(673.1 mm)

24L"(629 mm)

Small Large 8D"(219 mm)

7D"(194 mm)

L"(19 mm)

1K"(38 mm)

1"(25 mm)

1"(25 mm)

7"(178 mm)

22"(559 mm)

15"(381 mm)

6J"(159 mm)

18G" (468 mm)

27"(686 mm)

MOUNTINGPLATE

COVER

MOUNTINGPLATE

COVER

Small Large

1J "(32 mm)

7K"(191 mm)

7K"(191 mm)

15K"(394 mm)

6L"(172 mm)

12E"(327 mm)

1"(25 mm)

6L"(172 mm)

12E"(327 mm)

1"(25 mm)

17E"(454 mm)

1J"(32 mm)

MOUNTINGPLATE

COVER

MOUNTINGPLATE

COVER

Refer to Kim Lighting’s Arms & Poles Selection Guide for complete details.

Mounting Arm Dimensions

/


Photometry

LM-79-2008 Test Results

Report Number 29257

Mounting Height 20 Feet

Light Dist. Type Type III

Total Flux 5870 Lm.

System Watts 132.8W

180°

UH

UL

FVH 90° = 1.1%

FL 30° = 6.1%

FM 60° = 38.0%

FH 80° = 33.4%

0°


UP LIGHT0 lm. 0%

BACKLIGHT

1252 lm. 21.3%

BVH 90° = 0.4%

BH 80° = 8.3%

BM 60° = 10.2%

BL 30° = 2.4%

180°

UH

UL

FVH 90° = 0.9%

FL 30° = 4.9%

FM 60° = 24.4%

FH 80° = 19.4%

0°


UP LIGHT0 lm. 0%

BACKLIGHT

3311 lm. 50.3%

BVH 90° = 0.9%

BH 80° = 19.3%

BM 60° = 24.8%

BL 30° = 5.3%

HOUSE STREET

0

1

1

2

3

4

3

2

1

0

1

2

3

4

.51

1

.2

.1


Report Number 29259


Light Dist. Type Type V

Total Flux 6585 Lm.

System Watts 133.1W

Era® Bell 21"

Type V - 120 LED

HOUSE STREET

0

-1

1

2

3

4

3

2

1

0

1

2

3

4

.2.1

.51

Era® Bell 21" Type III - 120 LED

2

Log onto www.kimlighting.com and download photometric fi les from Kim Lighting’s IES File Library. For custom optics and color temperature confi gurations, contact factory.

/




Report Number 29258


Light Dist. Type Type III

Total Flux 6942 Lm.

System Watts 133.2W

180°

UH

UL

FVH 90° = 2.0%

FL 30° = 4.3%

FM 60° = 31.5%

FH 80° = 42.6%

0°


UP LIGHT0 lm. 0%

BACKLIGHT

1361 lm. 19.6%

BVH 90° = 0.9%

BH 80° = 10.0%

BM 60° = 7.4%

BL 30° = 1.3%

180°

UH

UL

FVH 90° = 1.4%

FL 30° = 3.8%

FM 60° = 21.5%

FH 80° = 22.1%


UP LIGHT0 lm. 0%

BACKLIGHT

3822 lm. 51.2%

BVH 90° = 2.0%

BH 80° = 22.9%

BM 60° = 22.0%

BL 30° = 4.2%

0°

HOUSE STREET

0

1

1

2

3

4

3

2

1

0

1

2

3

4

.5

11

.2

.1


Report Number 29260


Light Dist. Type Type V

Total Flux 7468 Lm.

System Watts 133.1W

Era® Acorn 21"

Type V - 120 LED

HOUSE STREET

0

-1

1

2

3

4

3

2

1

0

1

2

3

4

.2

.1

.5

1

Era® Acorn 21"

Type III - 120 LED

2

Log onto www.kimlighting.com and download photometric fi les from Kim Lighting’s IES File Library. For custom optics and color temperature confi gurations, contact factory.

/


Kim Lighting is working closely with numerous organizations to develop industry standards ensuring the effi ciency, dependability and quality of LED products that are sold to our customers.

Kim Lighting is doing its part to limit hazardous waste and utilize resources to their fullest. MicroEmitter luminaire housings and LED components meet strict US and international environmental protection laws, and are constructed from more than 90% pre and post recycled materials and are entirely lead and mercury free.

RoHS – Identifi es product components with restricted use of hazardous substances.

Recyclable – Identifi es products that use pre and post recycled materials.

Preserving Resources

ROHS/WEEE COMPLIANT PRE AND POST RECYCLED MATERIAL

RENEWABLE ENERGYSOURCE COMPATIBILITY

The Future Is Today

Renewable – Identifi es products that are compatible with renewable energy systems.

/



BUILDING INFORMATION MODELINGBUILDING INFORMATION MODELING

BIM – Simulate, discover and innovate with Kim Lighting’s Building Information Modeling data tools.

QR Codes – Direct access to specifi cation and installation sheets, performance data and video information segments.

Kim Lighting offers the most advanced design tools that allow the design community to select products that meet all aspects of a project’s criteria.

Kim Lighting’s 3D BIM and SketchUp models allow designers to seamlessly integrate lighting and energy consumption into their project, saving both time and money as they eliminate the guesswork on how the lighting performs and integrates in the built environment.

Kim Lighting’s QR codes allow you to download the most up to date product spec sheets, LED performance summaries and HID to LED conversion video segments straight to your smart mobile device.

Design Tools

QR

CO

DE

Scan code to go towww.kimlighting.com

GGGGGGGGGGGGGG OOOOOOOOOOOO OOOOOOOOOOOO OOOOOOOOOOOOO INNNNGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGBUBBBBUBUBUBUBBBBBUBUBUBUBUBUBUBUBUBUBUBUBUBBUBUBUUBBUBUBUBUBUBUBUBUBUBUBBBUBUBUBUUUUBUUUBBBUUUBUBUBUBUBUBUBUBBBBUUUUBUBBBUBUUUBBBUUBUBUBBUBUBUBUBUUBBUUUBBUBUUUUBBUUUUUBBBBBBBUUBBBBUBUBUUBBBUB BUBUBUBBBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBBBUBUBUBUBUUUBUBUBUBBUBUBUBUBUBUUBUBUBBUBUBBUUBUBUBUUBUBUBUBUBUBUUUBUBUBBBUUUBBBUUBUBBUBUUBUUBBUBUBUBUBBUBBUUBUBUBBUUUBUBBBBBUBUBUBUBUUUBBBUBUBUUUBUUUUBUBUILILILILLILLLLLILLLILLLLLILILLLLLLLLLLLLLLILILILILLLLLLLLLLLILLLLLLLLLLILLILLLLLLLLILLILLLILLLLLLIILLILLLILLLLLLLLLILIIILIILLLDDDDDDDDDDDDDDIDDDIDIDDDDDDDDDDDDIDDDDDDDDDDDDIDIDIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD NGNGNGNGNGNGNGNGNGNGNGGNGGGNGNGNGGGNGNGNGNGGGGGGGGGGGNGNGGNGNGNGGNGNGGNGGGGGGNGGGGGN II I IIIIIIIIIIIIIIIIIIIIIIIIIIIIINNNFNFNFNFNFNFNFNFNFNFNFNFNFNFFNNFFNFNFNFNFNFFFNNFFNFNFNFNFNFNFNFNNFNFNNFNNFNFFNNFNNNNNFNFFFNFFFORORORORORORORORORORORORORORORORORORORORRORORORORORORORORORROOROROOROORRRORORORRORORORRORORROOORRRORRORRMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAAMAMAMAMAMAMAMAMMAMAMAMMAMAMAMMAMAMAAMAAMMMAMAMAMAMAMAAMAMAMAAAAAAAAMMMMAMAMMMMMAATTITITITITTITITITITITITITTTITITITITTTITITTTTTITTTITTTTITTTTTTTTTITTIITITTTTITTIT ONONONONONOOONONONONONONONONONONONONONOOOONONNNONONOONOONONONONONONNONNONONOOOONNNOONONOONNOOONN MM M M MM M MMMM M MMMMMM MMMM MMM MMMMMMMMMMMMMMMMMMMMMMODODODODODODODODODODODODODODODODODOOOODOODODOOOOODOODODOODODODODODOOOOODODODOODODOODODOODODODODODODODOOODOOOODODOODOODODODODOODODODODOODODDOOODODOODODODODODODOOOOODODDDDDODOODDELELEEEEEEEEEEEEEE ININUBUBUBBBUBUBUBUBUBUBUBUBUBUBUBBBUBUBUBUBUBUBBUBUBUBUBUUUBUBUBUBBUBUBUBUBUUBUBUBUBBBUBUBUBBUBUBUBUUUUBUBUBBUBBBUBUBUBUBUUUUBUBUUBBBUUBBBBUUBUUUBBBUUBUUUUUBUUILILILILLILLLLILLLLLLILILLLLLLLLLLILILLILLLLLLLILLLLLLLLLILLLLLLLILLLLLLILLLILLLLLLLLI DDDDDDDDDDDIDDDIDIDDDDDDDDDIDDDDDDDDDDDDIIDIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD NGNGNGNGNGNGNGGGGGGGGGGGGGGGGNGGGGGGGGGGGGGGGG IIIIIIIIIIIINNNNFNFNFNFNFNFNFNFNFNFNFNNFNNNFNFFNNNFNFNFNFNNFNFNFNFNFNFNFFNNN ORORORORORORORORORORORORORORORORORORORRROROOOROOROROOROROOROOROORROROORROROROORRRORMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAAMAMAMAMAMMMAMAMAMMAMAAMMAMAMAMAMAMAAMAMAMAMAAAAAAATTITITITITTITITTTTITITTTITITITTTTITITTTTTITTTITTTTTTTTTTTTTTT ONONONONONOOONONONONONONONONONONNOONOONNONONONOONONONONOONNNNONONOOOONNNOOOO M MMMMMMMMM MMMMMMM MMMMMMMMMMMMMMMMMMMMMMMMODODOODODODODODODODODODODODODODODOOOODOODODOOOOODOODODOODODODODOOOOOODODODOODODOODODODODODODODODODOOODODDODODDODOOODDODOODODOODOODOODOODOOOOODODDDDODELELEEEEEEEEEEEE ININBUILDING INFORMATION MODELINGQR CODE TECHNOLOGY

/

MAILING ADDRESSP.O. BOX 60080CITY OF INDUSTRY, CA 91716-0080

Printed in U.S.A.Version 1.1 (9/11)

www.kimlighting.com

ENTIRE CONTENTS © COPYRIGHT 2011 KIM LIGHTING INC. ALL RIGHTS RESERVED REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION IS STRICTLY PROHIBITED.

BECAUSE OF CONTINUING PRODUCT IMPROVEMENT PROGRAMS, KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

BUSINESS ADDRESS16555 EAST GALE AVENUECITY OF INDUSTRY, CA 91745PHONE: 626.968.5666FAX: 626.369.2695

Era® LEDSITE / ROADWAY

All-Inclusive LED Bollards LOW LEVEL

LED Site Wallforms®

WALL MOUNTED

Curvilinear LEDSITE / ROADWAY

CFL LEDFLOODLIGHTING

Wall Director® LEDWALL MOUNTED

LED Round Wall FornsWALL MOUNTED

PGL7 LEDPARKING STRUCTURE

HID to LEDUPGRADE KIT

MicroEmitter™ LED TechnologyCOMPREHENSIVE CATALOG

WARP9® LEDSITE / ROADWAY

The Archetype® LEDSITE / ROADWAY

All Inclusive LEDLANDSCAPE COLLECTION

Structural LEDSITE / ROADWAY

Additional Kim Lighting Premium LED Families

SITE/ROADWAYBE LED/AE LED

Documents

SITE/ROADWAY BE LED / AE LED Era Bell/Era Acorn LEDkimlighting.s3.amazonaws.com/pdf/kl_aebeled_lit.pdf · · 2011-09-15SITE/ROADWAY BE LED / AE LED Era ® Bell/Era ... Era ® Bell/Era