siemens.com/et200sp

SIMATIC ET 200SPSimple to use, smaller in size, stronger in performance

Engineered with TIA Portal

Intuitive, efficient, proven TIA Portal redefines engineering

Distributed I/O for control cabinets

SIMATIC ET 200SPSimple to use, smaller in size, stronger in performance

Simple

Quick station setupWith the simple station setup, the distributed peripherals make the most of the available space. The maximum configuration comprises 64 modules, i.e. 64 x 16 signals all in a width of only one meter. Both the modules and the plug boxes can be exchanged during operation. The mechanical coding of I/O modules with the base unit prevents module con-fusion during assembly. This ensures the prevention of faults.

The new design and push-in clamps make wiring and disconnection of cables easier than ever. You dont need any tools for wiring and just a screwdriver for disconnecting the cables. The connections are gas-tight and thus corrosion-resistant.

Reliable diagnosticsSIMATIC ET 200SP continuously provides users with detailed information about the system status via channel-specific signal transfer on the I/O module. No additional engineering is necessary for this. Further diagnostic information can be read out with the SIMATIC STEP 7 V5.5 or SIMATIC STEP 7 V11 (TIA Portal) engineering system. Signals can be checked directly at the clamps using a measuring probe.

Smaller

Effective footprintSIMATIC ET 200SP is approximately 50% smaller compared to other distributed I/Os. With a height of approx. 115 millimeters, the system offers space for 16 channels with single-conductor connection (without AUX terminals). With 3-conductor connection with AUX terminals, the height amounts to 140 millimeters for 8 channels. The depth is approx. 75 millimeters. Leaving sufficient distance to the control cabinet door, SIMATIC ET 200SP complies with the standardized bending radii in control cabinets with a depth of 80 millimeters.

Maximum transparencyDespite the systems compactness, the I/O modules allow for very transparent labeling. An innovative labeling system combines the most important information regarding module, wiring, and channels.

Stronger

Maximum flexibility The SIMATIC ET 200SP provides maximum flexibility for setup: Configuration management with option handling for complete modules and

configuration management while running for properties of the individual modules Easy expandability thanks to design with gaps Quick replacement of modules with multiple hot-swapping

SIMATIC ET 200SP

Distributed I/O for control cabinets

2

I/O modulesDigital input and output modules6ES7131-6BF00-0BA0 DI 8x24VDC ST 6ES7131-6BH00-0BA0 DI 16x24VDC ST6ES7131-6BF00-0CA0 DI 8x24VDC HF6ES7131-6FD00-0BB1 DI 4x120VAC...230VAC ST6ES7131-6BF60-0AA0 DI SRC 8x24VDC BA6ES7131-6TF00-0CA0 DI 8xNAMUR HF6ES7132-6BD20-0BA0 DQ 4x24VDC/2A ST6ES7132-6BF00-0BA0 DQ 8x24VDC/0.5A ST6ES7132-6BH00-0BA0 DQ 16x24VDC/0.5A ST6ES7132-6BF00-0CA0 DQ 8x24VDC/0.5A HF6ES7132-6BF60-0AA0 DQ Sink 8x24VDC/0.5A BA6ES7132-6FD00-0BB1 DQ 4x24VAC...230VAC/2A ST6ES7132-6BD20-0CA0 DQ 4x24VDC/2A HF6ES7132-6HD00-0BB0 RQ 4x120VDC-230VAC/5A NO ST6ES7132-6GD50-0BA0 RQ 4x24VDC/2A CO ST

Analog input and output modules6ES7134-6GD00-0BA1 AI 4xI 2-/4-wire ST6ES7134-6HD00-0BA1 AI 4xU/I 2-wire ST6ES7134-6JD00-0CA1 AI 4xRTD/TC 2-/3-/4-wire HF6ES7134-6JF00-0CA1 AI 8xRTD/TC 2-wire HF6ES7134-6HB00-0CA1 AI 2xU/I 2-/4-wire HF6ES7134-6HB00-0DA1 AI 2xU/I 2-/4-wire HS6ES7135-6HD00-0BA1 AQ 4xU/I ST6ES7135-6HB00-0CA1 AQ 2xU/I HF6ES7135-6HB00-0DA1 AQ 2xU/I HS

Fail-safe modules6ES7136-6BA00-0CA0 F-DI 8x24VDC HF6ES7136-6DB00-0CA0 F-DQ 4x24VDC/2A HF6ES7136-6PA00-0BC0 F-PM-E PPM6ES7136-6RA00-0BF0 F-RQ 1x48VDC/230VAC/6A ST3RK7136-6SC00-0BC1 F-CM AS-i Safety ST

Communication modules6ES7137-6BD00-0BA0 CM 4xIO-Link ST6ES7137-6AA00-0BA0 CM 1xPtP ST (ASCII, 3964R, USS, Modbus)3RK7137-6SA00-0BC1 CM AS-i master ST6ES7545-5DA00-0AB0 CM DP Master (for controllers)

Technology and special modules6ES7138-6AA00-0BA0 TM Count 1x24V6ES7138-6BA00-0BA0 TM PosInput 1 (SSI, 5V-Count)7MH4138-6AA00-0BA0 TM 1xSIWAREX WP321 ST (analog)6ES7 552-1AA00-0AB0 TM Timer DIDQ 16x24 V6ES7134-6PA00-0BD0 AI energy meter ST *

Connection module6ES7193-6BN00-0NE0 BU-Send6ES7193-6AS00-0AA0 BA-Send 1xFC

3

Bus adapters 6ES7193-6AR00-0AA0 BA 2xRJ45

6ES7193-6AF00-0AA0 BA 2xFC6ES7193-6AP00-0AA0 BA 2xSCRJ (only from function class HF)

Base unitsBase unit type A06ES7193-6BP00-0BA0 16 push-in, 2 infeed bridged, DI dig./analog, max. 24 V DC/10 A6ES7193-6BP20-0BA0 16 push-in, 10 AUX, 2 infeed bridged, DI dig./analog, max. 24 V DC/10 A6ES7193-6BP00-0DA0 16 push-in, 2 infeed separated, DI dig./analog, max. 24 V DC/10 A

6ES7193-6BP20-0DA0 16 push-in, 10 AUX, 2 infeed separated, DI dig./analog, max. 24 V DC/10 A

Base unit type A1 (with temperature measuring)6ES7193-6BP00-0BA1 16 push-in, 2 infeed bridged, temperature, max. 24 V DC/10 A6ES7193-6BP40-0BA1 16 push-in, 12 infeed bridged, temperature, max. 24 V DC/10 A6ES7193-6BP00-0DA1 16 push-in, 2 infeed separated, temperature, max. 24 V DC/10 A6ES7193-6BP40-0DA1 16 push-in, 12 infeed separated, temperature, max. 24 V DC/10 A

4

Base unitsBase unit type B0, C1, D0, and F06ES7193-6BP20-0BB0 Base unit type B0, 12 push-in, 4 AUX, up to 230 V6ES7193-6BP20-0BB1 Base unit type B1, 12 push-in, up to 230 V6ES7193-6BP20-0DC0 Base unit type C0, 6 push-in, 2 AUX, for AS-i, Safety6ES7193-6BP20-0BC1 Base unit type C1, 6 push-in6ES7193-6BP00-0BD0 Base unit type D0, 12 push-in6ES7193-6BP20-0BF0 Base unit type F0, 8 push-in

You will find options for combining peripheral modules with the base units and with the interface modules at www.siemens.com/et200sp or in the TIA Selection Tool.

Interface modules and CPU6ES7155-6AA00-0BN0 IM155-6PN ST with server module and BA 2xRJ456ES7155-6AU00-0BN0 IM155-6PN ST with server module, without bus adapter6ES7155-6AU00-0CN0 IM155-6PN HF with server module, without bus adapter

6ES7155-6BA00-0CN0 IM155-6DP HF with server module (6ES71936PA000AA0) and DP connector (6ES7972-0BB700XA0)6ES7510-1DJ00-0AB0 CPU 1510SP-1PN (SIMATIC memory card required)6ES7512-1DK00-0AB0 CPU 1512SP-1PN (SIMATIC memory card required)6ES7510-1SJ00-0AB0 CPU 1510SP F-1 PN (SIMATIC memory card required)6ES7512-1SK00-0AB0 CPU 1512SP F-1 PN (SIMATIC memory card required)... CPU 1515SP PC (configurator)

5

Labeling accessories6ES7193-6CP01-2MA0 10 color-coding plates, color code CC01 (DI 8)6ES7193-6CP02-2MA0 10 color-coding plates, color code CC02 (DQ 4 or 8)6ES7193-6CP03-2MA0 10 color-coding plates, color code CC03 (AI 4)6ES7193-6CP04-2MA0 10 color-coding plates, color code CC04 (IO-Link)

6ES7193-6CP71-2AA0 10 color-coding plates, color code CC71 (DI 8 with 10 AUX terminals), yellow-green

6ES7193-6CP72-2AA0 10 color-coding plates, color code CC72 (DQ 4 or 8 with 10 AUX terminals), red

6ES7193-6CP73-2AA0 10 color-coding plates, color code CC73 (AI 4 with 10 AUX terminals), blue

6ES7193-6CP74-2AA0 10 color-coding plates, color code CC74 (IO-Link with 2 x 5 additional terminals, 5 x red, 5 x blue)

6ES7193-6CP81-2AB0 10 color-coding plates, 4 AUX terminals, yellow-green, CC816ES7193-6CP82-2AB0 10 color-coding plates, 4 AUX terminals, red, CC826ES7193-6CP83-2AB0 10 color-coding plates, 4 AUX terminals, blue, CC836ES7193-6CP51-2MC0 10 color-coding plates, color code CC516ES7193-6CP52-2MC0 10 color-coding plates, color code CC52

6ES7193-6CP84-2AC0 10 color-coding plates, 2 AUX terminals, yellow-green, CC846ES7193-6CP85-2AC0 10 color-coding plates, 2 AUX terminals, red, CC856ES7193-6CP86-2AC0 10 color-coding plates, 2 AUX terminals, blue, CC866ES7193-6LR10-0AA0 500 labeling strips, light gray6ES7193-6LR10-0AG0 500 labeling strips, yellow6ES7193-6LA10-0AA0 1,000 labeling strips, 10 DIN A4, 100 labels per sheet, light gray6ES7193-6LA10-0AG0 1,000 labeling strips, 10 DIN A4, 100 labels per sheet, yellow6ES7193-6LF30-0AW0 160 equipment labeling plates

Additional accessories6ES7133-6CV15-1AM0 5 BU covers, 15 mm6ES7133-6CV20-1AM0 5 BU covers, 20 mm6ES7193-6SC00-1AM0 5 shielding terminals, max. 2 cables6ES7954-8LC02-0AA0 SIMATIC Memory Card 4 MB 6ES7954-8LE02-0AA0 SIMATIC Memory Card 12 MB6ES7954-8LF02-0AA0 SIMATIC Memory Card 24 MB6ES7954-8LL02-0AA0 SIMATIC Memory Card 256 MB6ES7954-8LP01-0AA0 SIMATIC Memory Card 2 GB

Engineering requirements STEP 7 via TIA Portal STEP 7 V5.5 integration in the hardware catalog GSD/GSDML The ET 200SP can also be used in combination with SIMOTION and SINUMERIK as well as in the PCS7 environment. CPU 1510SP and CPU 1512SP can only be programmed with TIA Portal, Version V13 Update 3 and higher. CPU 1510SP F, CPU 1512SP F, and CPU 1515SP PC can be programmed with TIA Portal V13 SP1 and higher.

6

Highlights

CPU 1510SP-1PN, CPU 1512SP-1PN, and CPU 1515SP PCHeader modules with integrated controller and PROFINET connection are available for the SIMATIC ET 200SP. With the three integrated Ethernet ports, the connection systems can be flexibly selected by means of bus adapters. These CPUs feature the same functionalities as the CPU 1511 and CPU 1513, such as integrated trace function, Web server and fully symbolic programming. Connection to a higher-level CPU can be made in exactly the same way thanks to the I-Device functionality. A PC system is available additionally in the form of the CPU 1515SP PC.

siemens.com/distributed-controller

PRONETAPRONETA ensures eased commissioning and configuration of your PROFINET network. Your networks topology is automatically read in. You can either change the address parameters of your SIMATIC ET 200SP station manually or use the parameters of a tem-plate. I/O modules can be parameterized, controlled, and monitored with the help of PRONETA. The test results are logged in a clearly structured protocol. siemens.com/proneta

TIA Selection ToolThe TIA Selection Tool offers assistants for the selection of desired devices and networks. Moreover, it provides configurators for the selection of modules and accessories as well as for the verification of correct operability. The TIA Selection Tool generates a complete order list on the basis of your product selection or product configuration. siemens.com/tia-selection-tool

SIMATIC ET 200ALThe compact modules of the SIMATIC ET 200AL are specifically suited for applications in restricted spaces and for mobile applications thanks to their high protection class IP65/67 and compact design, small footprint, and low weight. They can be mounted in any installation position by means of front or transverse screw attachment. The modules can be incorporated in the automation network per PROFINET or PROFIBUS or through integration of ET 200SP.

SIPLUS extremeThe ET 200SP convinces through usability and top performance in extremely compact design. Thanks to its surface finish, SIPLUS ET 200SP can withstand particularly harsh industrial environments, e.g. extended temperature range including condensation and aggressive atmosphere, while working economically and reliably at all times even at altitudes up to 5,000 meters. siemens.com/siplus-extreme

Safety integratedSIMATIC ET 200SP supports safety-related communication. The safety DI and DO modules are equivalent in size to the standard modules. Their functional safety is certified in accor-dance with EN 61508. They are rated for safety-related applications up to SIL3 in accor-dance with EN 62061 and PL e in accordance with ISO 13849. As a special highlight of SIMATIC ET 200SP fail-safe modules, the fail-safe addresses are assigned via engineering during commissioning. This simplifies the setup process and saves time. siemens.com/safety

7

Subject to change without prior notice Article No.: E20001-A171-P240-V1-7600 Dispo 06313 WS 101410.0 Printed in Germany Siemens AG 2014

The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective character-istics shall only exist if expressly agreed in the terms of contract.

All product designations may be trademarks or product names of Siemens AG or supplier compa-nies whose use by third parties for their own purposes could violate the rights of the owners.

Siemens AG Digital Factory Factory Automation P.O. Box 48 48 90026 Nuremberg Germany

Follow us on: twitter.com/siemensindustry youtube.com/siemens

SIMATIC ET 200SP take a look!

Discover everything about SIMATIC ET 200: Descriptive animations of

ET 200SP functions Further details on

design and modules All about PRONETA

at www.siemens.com/proneta All about the TIA Selection

Tool at www.siemens.com/ tia-selection-tool

Discover more:

siemens.com/et200sp

Extended functions integrated in the standard modulesThe new modules provide you with extended functions and greater performance in the standard modules.

Pulse width modulation (DQ 4x24VDC/2A HS)In this operating mode, the four outputs provide a pulse width modulated output signal. The digital channel is con-trolled with a mark-space ratio of 0.0% to 100.0%. The actuating signal is output digitally in the form of a sequence of on/off switching pulses.

Counting (DI 8x24VDC HS)Four channels are available in the counting mode for the connection of pulse generators with a counting width of 32 bits and a maximum frequency of 10 kHz. Comprehen-sive parameterization options make it possible to adjust to the application.

Valve control (DQ 4x24VDC/2A HS)A special valve control function is integrated in the DQ operating mode. This switches on the output for a pre-settable hold time when a 1-signal is output, after which it changes over to a pulse/pause output with adjus-table frequency and duty cycle.

siemens.com/et200sp

The IO system for control cabinets

SIMATIC ET 200SPSimple application, compact design, top performance

MSI/MSO (module-internal shared input/output)Input data are made available to up to 4 I/O controllers. Each controller has read access to the same channels (DI 8x24VDC HF). MSO allows an output module to make the status of its output data available to a maximum of 3 additional I/O controllers (DQ 8x24VDC/0,5A HF, DQ 4x24VDC/2A HF).

Oversampling (DI 8x24VDC HS, DQ 4x24VDC/2A HS, AI 2xU/I 2-/4-wire HS, AQ 2xU/I HS)Oversampling offers the user the option of recording two to n measured values synchronized with the clock and at constantly equal intervals within a PROFINET transmit clock pulse in the peripheral module. All n recorded measured values are subsequently transmitted to the PROFINET controller in chronological order. An important advantage of oversampling is that a fast CPU cycle is not required for recording measured values with high time resolution.

Higher input current (DI 8x24VDC BA)In accordance with IEC 61131, this basic module also offers a type 2 characteristic input curve as well as type 1 and 3.

Engineered with the TIA Portal

siemens.com/et200sp

New modules with extended functions Interface modules6ES7155-6AR00-0AN0 Interface module IM 155-6 PN BA

with integrated RJ45 jacks with server module

1

Base Units6ES7193-6BP20-2DA0 Type A0 16 push-in, 10 AUX, 2 sep. infeeds, DI dig./analog, max. 24 V DC/10 A 10 *6ES7193-6BP00-2DA0 Type A0 16 push-in, 2 sep. infeeds, DI dig./analog, max. 24 V DC/10 A 10 *6ES7193-6BP20-2BA0 Type A0 16 push-in, 10 AUX, 2 infeeds bridged, DI dig./analog, max. 24 V DC/10 A 10 *6ES7193-6BP00-2BA0 Type A0 16 push-in, 2 infeeds bridged, DI dig./an., max. 24 V DC/10 A V DC/10 A 10 *

Digital peripheral modules6ES7131-6BH00-2BA0 DI 16x24VDC ST 10 *6ES7131-6BF00-0AA0 DI 8x24VDC BA 16ES7131-6BF00-2AA0 DI 8x24VDC BA 10 *6ES7131-6BF00-2BA0 DI 8x24VDC ST 10 *6ES7131-6BF00-0DA0 DI 8x24VDC HS 16ES7132-6BH00-2BA0 DQ 16x24VDC ST 10 *6ES7132-6BF00-2BA0 DQ 8x24VDC/0.5A ST 10 *6ES7132-6BD20-2BA0 DQ 4x24VDC/2A ST 10 *6ES7132-6BD20-0DA0 DQ 4x24VDC/2A HS 1

Analog peripheral modules6ES7 134-6GF00-0AA1 AI 8xI 2-/4-wire BA 16ES7 134-6FF00-0AA1 AI 8xU BA 1

Bus adapters6ES7193-6AP20-0AA0 Bus adapter medium converter

BA SCRJ/RJ451

6ES7193-6AP40-0AA0 Bus adapter medium converter BA SCRJ/FC

1

*Ordering information: A different ordering process has been introduced for the 10-pack compared with the ET 200S.

New connection optionsThe new interface module IM 155-6 PN Basic offers a cost-optimized solution for small station expansions. It has 2 integrated PROFINET IO ports with RJ45 connection.The new bus adapters BA SCR/RJ45 and BA SCR/FC allow the system-integrated transition of the PROFINET connection from fiber-optic cable to copper cable. In this way, distances of up to 300 meters between two stations can easily be bridged.

Article No.: DFFA-B10021-00-7600 Dispo 06313 Printed in Germany Siemens AG 2015

Siemens AG Digital Factory P.O. Box 48 48 90026 Nrnberg, Germany