Short disc cultivators: Compact disc harrows

www.profi.co.uk75profi 06/2019

Short disc cultivators:

Compact disc harrowsFor high-speed shallow stubble busting or secondary cultivation, these implements offer fast working speeds without excessive power outputs and the opportunity to sow as you go for establishing oilseed rape and similar crops. Here is a round-up of machines available on the market in the UK

Agrisem Disc-O-Mulch Silver

Description: Notched discs in diameter 510mm on the front gang, 460mm on the rear gang, each mounted on a double coil pigtail tine with 1,020mm gang spacing and no disc stagger adjustment. Working depths of 50mm to 100mm set mechanically or by hydraulic option. Soil impact/levelling board ahead of rear discs to control soil flow optional — £1,375 to £2,695.

Model Width/ Mounted or Trailed Number of discs Weight V-Sem Roller 600mm Packer Roller 700mm Front paddle levelling tines — mech/hyd

Silver 3 3.00m / M 24+1 1,468kg £15,925 na na

Silver 3.5 3.50m / M 28+1 1,692kg £18,495 na na

Silver 4 4.00m / M 32+1 2,107kg £22,150 na na

Silver 4F 4.00m / M 32+1 2,280kg £29,895 na na

Silver 4FT 4.00m / T 32+1 3,800kg £43,295 na na





Note: Silver 3 to Silver 4 have rigid frames, 'F' and 'FT' models have hydraulic folding frames. Weight includes 450mm cage roller.

Options: Alternative 560mm front, 510mm rear fluted wavy-edge discs for mulching residues £320 per metre.

Agrisem Disc-O-Mulch Gold

Description: 610mm front, 560mm rear notched or fluted wavy-edge discs mounted individually on double coil pigtail tines with fixed disc stagger and 1,070mm spacing between gangs. Working depth 50mm to 150mm with mechanical or hydraulic adjustment. Soil impact/levelling board ahead of rear discs to control soil flow standard.

Model Width/ Mounted or Trailed Number of discs Weight V-Sem Roller 600mm Packer Roller 700mm Front paddle levelling tines — mech/hyd

Gold 3 3.00m / M 24+1 2,134kg £20,275 £21,355 na

Gold 3.5 3.50m / M 28+1 2,340kg £23,725 £24,975 na

Gold 4 4.00m / M 32+1 2,618kg £26,650 £28,140 na

Gold 4F 4.00m / M 32+1 3,146kg £36,175 £37,845 na

Gold 4FT 4.00m / T 32+1 5,566kg £54,225 £55,985 na

Gold 5F 5.00m / M 36+1 3,593kg £39,375 £41,145 na

Gold 5FT 5.00m / T 36+1 6,070kg £57,395 £59,300 na

Gold 6F 6.00m / M 40+1 3,853kg £41,325 £43,230 na

Gold 6FT 6.00m / T 40+1 6,374kg £64,550 £67,355 na

Gold 7.5FT 6.00m / T 40+1 9,100kg £88,050 £90,705 na

Gold 9FT 6.00m / T 40+1 10,020kg £98,500 £101,695 na

Gold 10FT 6.00m / T 40+1 13,330kg £117,250 na na

Gold 12FT 6.00m / T 40+1 15,680kg £131,195 na na

Note: Gold 3 to Gold 4 rigid frame, 'F' and 'FT' models hydraulic folding frame. Weight excludes clod board but with cage roller and SR hubs.

Options: Fluted wavy-edge discs for residue mulching (610mm front, 560mm rear) £205 per metre. Gold 3 to Gold 6F — extra heavy-duty hubs with mulcher discs £730 per metre (standard on trailed models); right-hand soil deflector kit — Gold 3 to Gold 6F and Gold 10FT and 12FT £120, Gold 4.5FT to Gold 9FT £700; hitch for drawbar lower linkage arms attachment - all trailed models £1,150 to £1,200.

Distributor: KRM

BUYERS GUIDE

075-091-Disk harrow guide-V3.indd 75 26/04/2019 17:06

profi 06/2019 profi 06/2019 www.profi.co.uk76

Amazone Catros

Description: 460mm x 4mm smooth discs mounted individually on rubber cushioned legs at 250mm spacing for working depths of 30mm to 120mm at 10-18km/hr. Discs set at 17⁰ front, 14⁰ rear. Mechanical depth setting using turnbuckles, swing-out spacers or hydraulic. Disc stagger adjustable mechanically or hydraulically on Catros 3001, mechanically only on all Catros 4002, 5002 and 6002 variants.

Model Width / Mounted or Trailed Number of discs Weight Wedge Ring Roller 580mm

Matrix Wedge Ring Roller 650mm Front paddle levelling tines — mech/hyd

Catros 3003 Special 3.00m / M 24 1,603kg £16,540 £18,395 £1,955 / £2,575

Catros 3001 3.00m / M 24 1,678kg £19,415 £21,270 na

Catros 4002-2 4.00m / M 32 3,038kg £33,870 £36,700 na

Catros 4002-2TS 4.00m / T 32 3,955kg £43,450 £46,280 na

Catros 5002-2 5.00m / M 40 3,292kg £36,900 £40,160 na

Catros 5002-2TS 5.00m / T 40 4,209kg £46,480 £49,740 na

Catros 6002-2 6.00m / M 48 3,541kg £41,800 £45,510 na

Catros 6002-2TS 6.00m / T 48 4,458kg £51,380 £55,090 na

Note: Trailed models with Cat III tractor lower lift arms drawbar as standard. Weights include 580mm Wedge Ring Roller.

Options: Hydraulic depth adjustment £590 to £735, hydraulic disc stagger adjustment for Catros 3001 £1,065. GreenDrill seed broadcaster, manual or electric central greasing, 600mm tooth packer roller, single and double 580mm U-profile and disc rollers.

Distributor: Amazone

Amazone Catros XL and Catros+

Description: XL 3003 — 610mm x 6mm notched or fine serrated discs at 250mm spacing for working depths to 160mm; Catros+ models — 510mm notched discs at 250mm spacing for working depths of 50mm to 150mm. Discs mounted individually on rubber damped legs with 17⁰ front, 14⁰ rear disc angle. Adjustable disc stagger on Catros+ 3001 with hydraulic adjustment optional, mechanical only on Catros+ 4002-2, 5002-2 and 6002-2.



Catros XL 3003 3.00m / M 24 1,960kg £21,875 £23,730 £1,955 / £2,575

Catros+ 3001 3.00m / M 24 1,728kg £20,730 £22,585 na

Catros+ 3003 Special 3.00m / M 24 1,661kg £17,225 £19,080 £1,955 / £2,575

Catros+ 4002-2 4.00m / M 32 3,098kg £35,550 £38,380 na

Catros+ 4002-2TS 4.00m / T 32 4,015kg £45,130 £47,960 na

Catros+ 5002-2 5.00m / M 40 3,612kg £40,415 £43,675 na

Catros+ 5002-2TS 5.00m / T 40 4,529kg £49,995 £53,255 na

Catros+ 6002-2 6.00m / M 48 3,927kg £45,320 £49,030 na

Catros+ 6002-2TS 6.00m / T 48 4,843kg £54,900 £58,610 na

Catros+ 7003-2TX 7.00m / T 56 7,610kg £75,455 £80,140 £5,900 / £7,435

Catros+ 8003-2TX 8.00m / T 64 8,015kg £85,645 £90,760 £6,490 / £8,025

Catros+ 9003-2TX 9.00m / T 72 8,717kg £96,580 £102,670 £7,085 / £8,620

Catros+ 12003-2TS 12.00m / T* 96 12,410kg £143,295 £149,785 na

Note: * 12m Catros+ can also work at 7.00m partially folded. Weights include 580mm Wedge Ring Roller.

Options: Hydraulic disc stagger adjustment for Catros+ 3001 £1,065. GreenDrill seed broadcaster, manual or electric central greasing, larger tyres and twin front suppport wheels for -2TX models. Crushboard paddle-type levelling tines also available to fit in front of packer with mechanical or hydraulic adjustment — 7003-2TX £8,140 / £9,150; 8003-2TX £8,500 / £9,510; 9003-2TX £8,850 / £9,860. Flexible tine harrow to fit finishing tool.


Amazone Certos

Description: 660mm x 6mm notched discs at 350mm spacing for working depths of 70mm to 200mm adjustable hydraulically and speeds of 10-15km/hr. Each disc mounted individually on rubber cushioned legs; front gang disc angle set at 22°, rear 17°, with mechanical adjustment of disc stagger.



Certos 4001-2TX 4.00m / T 24 6,441kg £64,450 £67,280 £5,030 / £5,750

Certos 5001-2TX 5.00m / T 28 6,941kg £71,905 £75,165 £5,400 / £6,120

Certos 6001-2TX 6.00m / T 36 8,288kg £82,365 £86,075 £5,515 / £6,235

Certos 7001-2TX 7.00m / T 40 8,823kg £91,595 £95,755 £5,635 / £6,355

Note: Weights include 580mm Wedge Ring Roller.

Options: GreenDrill seed broadcaster, manual or electric central greasing, larger tyres and twin front suppport wheels; 600mm tooth packer, single and double U-profile and 600mm disc roller packers; flexible harrow tines for finishing tools.


BUYERS GUIDE


www.profi.co.uk77profi 06/2019 www.profi.co.uk

AMJ Agro Atos

Description: 560mm discs individually mounted (510mm and 610mm discs optional), rubber shock absorbers, gang spacing 850mm, rollers with cleaners, maintenance-free bearings, side soil screens, powder-coated paint. XXL models have up and over transport wheel system.

Model Width / Mounted or Trailed Number of discs Weight Pipe Roller 600mm Ring Packer 620mm Front paddle levelling tines — mech/hydAtos 2.7m 2.70m / M 22 1,220kg £3,495 £4,099 na

Atos 3.0m 3.00m / M 24 1,310kg £3,950 £4,495 na

Atos 3.5m 3.50m / M 28 na £4,695 £5,295 na

Atos 4.0m 4.00m / M 32 na £5,295 £58,95 na

Atos 4.0m XXL 4.00m / T 34 2,500kg £8,595 £9,395 na

Atos 4.5m XXL 4.50m / T 38 2,700kg £9,295 £10,195 na

Atos 5.0m XXL 5.00m / T 42 3,000kg £9,850 £10,795 na

Atos 6.0m XXL 6.00m / T 50 3,600kg £11,395 £12,595 na

Note: Prices exclude transport and exchange rate fluctuations. Weight includes 560mm crumbler.

Options: Toothed packer roller (610mm or 500mm), Crosskill (550mm), T-ring roller (600mm), hydraulic linkage for drill.

Distributor: Machine Link

Bullock BT / BTC

Description: 560mm (or 620mm on BTC) notched discs mounted individually on rubber-cushioned legs at 17⁰ front and rear with mechanically adjusted disc stagger and 1,000mm spacing between gangs for speeds up to 12km/hr. Working depth of 40mm to 140mm adjustable mechanically on BT models with hydraulic adjustment optional (3.00m £200, 4.00m to 6.00m £550), and hydraulically as standard on BTC versions. Paddle levelling tines ahead of the rear packer are standard on both.

Model Width / Mounted or Trailed Number of discs Weight Steel Tooth Packer 500mm

Cast Ring Packer 500mm Front paddle levelling tines — mech/hyd

BT 1.5 1.50m / M 12 700kg £5,000 £5,000 na

BT 1.75 1.75m / M 14 780kg £5,400 £5,400 na

BT 2.0 2.00m / M 16 825kg £5,800 £5,800 na

BT 3.0 3.00m / M 24 1,320kg £7,950 £7,950 na



Dal-Bo FarmerDisc

Description: 520mm diameter, 6mm thick scalloped discs with rubber sausage protection. Working angle of 14° front and 17° rear with mechanically-adjustable disc gang stagger. Depth control manually set via roller. Flap between disc gangs, levelling disc at sides, Cat II and III. Bearings with double seals.

Model Width / Mounted or Trailed Number of discs Weight Cage Roller 500 T-Ring Roller 600mm Front paddle levelling tines — mech/hyd

FarmerDisc 3.00m 3.00m / M 22 1,750kg £11,970 £12,920 na



Note: Weights with 500mm cage roller.

Options: Road lights £350, transport kit £4,750, 450mm T-ring on 3.00m £1,350, 450mm cage roller on 3.00m £1,350.

Distributor: Dal-Bo

Dal-Bo MaxiDisc

Description: 560mm diameter, 6mm thick scalloped discs mounted individually on rubber cushioned legs with fixed stagger but hydraulic angle adjustment from 0-20°. Depth control hydraulically set via roller. Flap between disc gangs, levelling disc at sides, Cat II and III on mounted, Cat III on semi-mounted. Conical roller bearings.

Model Width / Mounted or Trailed Number of discs Weight Cage Roller 500mm T-Ring Roller 600mm Front paddle levelling tines — mech/hyd

MaxiDisc 3.00m 3.00m / M 24 2,100kg na £15,250 na

MaxiDisc 4.00m 4.00m / M 32 2,780kg na £20,220 na

MaxiDisc 4.00m 4.00m / T 32 5,010kg na £34,490 na

MaxiDisc 5.00m 5.00m / T 39 5,470kg na £39,200 £5,090

MaxiDisc 6.00m 6.00m / T 47 5,950kg na £45,030 £5,295

Note: Weights with 600mm T-Ring Roller — twin roller on trailed models.

Options: On mounted models road lights £260-430, transport kit £4,750, 3.00m bogie roller (600mm) £3,480, while a 450mm crumbler is £1,350. Semi-mounted options include two extra gauge wheels £1,920, hydraulic brakes £1,750; can also have air on 5.00m/6.00m £2,590, electro-hydraulic control £2,350.

Distributor: Dal-Bo

CultiKing DiscKing

Description: 560mm notched discs mounted individually on rubber buffered legs. DiscKing 300 — mechanical depth adjustment via packer pin and hole adjusters; DiscKing 400 — hydraulic depth adjustment via packer.

Model Width / Mounted or Trailed Number of discs Weight Crumbler Roller 500mm

DD Fusion Roller 600mm Front paddle levelling tines — mech/hyd

DiscKing 300 3.00m / M 24 1,680kg poa poa na

DiscKing 400 4.00m / M 30 3,360kg na poa na

Note: Weights with 600mm DD Fusion Packer.

Options: 500mm Crumbler Roller, 600mm DD Fusion Roller, 600mm Pressed Steel Roller. Hydraulic depth adjustment.

Distributor: T H Jenkinson

Bullock BT / BTC continued...

Model Width / Mounted or Trailed Number of discs Weight V-Sem Roller 600mm Packer Roller 700mm Front paddle levelling tines — mech/hydBT 3.0 2T 3. 00m / M 24 1,900kg £8,950 £8,950 na

BT 4.0 4.00m / M 32 1,750kg £11,950 £11,950 na

BT 4.0 T 4.00m / T 32 2,200kg £14,950 £14,950 na

BT 5.0 5.00m / M 40 2,600kg £13,950 £13,950 na

BT 5.0 T 5.00m / T 40 3,200kg £16,950 £16,950 na

BT 6.0 6.00m / M 48 3,100kg £15,950 £15,950 na

BT 6.0 T 6.00m / T 48 3,700kg £18,950 £18,950 na

BTC 5.0 5.00m / T 40 4,680kg £22,500 £22,500 na

BTC 6.0 6.00m / T 48 5,200kg £24,500 £24,500 na

Note: Weights with 500mm Steel Tooth Packer.

Options: Seed broadcaster; 500mm Tube Bar Packer, Steel Flexi Ring Packer, 500mm Rubber Ring Packer, 400mm Double Cage Bar Packer, Double C Bar Packer (soil-on-soil), 500mm T Bar Packer, Crosskill Packer.

Distributor: Bullock Tillage

BUYERS GUIDE

BT

SN

ewH

olla

nd

pre

fers

l

ub

rica

nts


www.profi.co.uk79profi 06/2019 www.profi.co.ukwww.newholland.com/uk

NEW HOLLAND TOP SERVICE 00800 64 111 111 24/7 SUPPORT AND INFORMATION. The call is free from a land line. Check in advance with your Mobile Operator if you will be charged.

IMPLEMENTING OUR VISION OF FARMING.

FULL LINE,

FULL CIRCLE.Boost your business productivity with our complete range of solutions.

NEW HOLLAND BT

SN

ewH

olla

nd

pre

fers

l

ub

rica

nts



Farmet Softer

Description: 510mm or 560mm notched discs at 240mm spacing mounted individually on rubber cushioned legs with fixed stagger working at 50mm to 120mm depths at 10-15km/hr.

Model Width / Mounted or Trailed Number of discs Weight Tube Roller 510mm LTX Rubber Packer 586mm Front paddle levelling tines — mech/hyd

Softer 3N 2.90m / M 24 1,540kg £10,390 £13,851 na

Softer 3.5N 3.50m / M 28 1,950kg £11,782 £15,131 na

Softer 4P 4.00m / T 34 3,600kg £20,865 £30,004 na

Softer 4.5NS 4.50m / M 38 2,950kg £18,849 £26,454 na

Softer 4.5PS 4.60m / T 38 4,000kg £22,968 £33,848 na

Softer 5PS 5.08m / T 42 4,350kg £23,915 £35,551 na

Softer 6NS 6.00m / M 50 3,650kg £22,858 £31,869 na

Softer 6PS 6.00m / T 50 4,990kg £28,193 £40,676 na

Softer 8PS 7.65m / T 62 6,700kg £37,845 £53,919 na

Softer 11PS 10.88m / T 90 9,200kg £53,457 £70,690 na

Note: N — mounted, NS — mounted folding, P — trailed, PS — trailed folding. Weight includes LTX roller.

Options: 510mm Tube Roller crumbler, 400mm/300mm Double crumbler, 520mm Steel Ring roller, 586mm LTX roller, 580mm SDR Disc roller, 580mm V Ring roller. Softer 3N 340kg ballast weights. Micro Drill air seeder.

Distributor: J Brock & Sons

Gregoire-Besson Normandie PF

Description: 510mm x 5mm notched discs at 250mm spacing on fixed stagger gangs and individually mounted on rubber cushioned legs for working 20mm to 120mm working depths adjustable mechanically or hydraulically.

Model Width / Mounted or Trailed Number of discs Weight Emopak Roller 630mm

Crumbler Roller 500mm Front paddle levelling tines — mech/hyd

Normandie 40-20 2.50m / M 20 1,400kg n/a £13,899 na

Normandie 50-24 3.00m / M 24 1,550kg £17,877 £14,811 na



Note: Weights with 500mm Crumbler Roller.

Options: Mounting kit for small seeder.

Distributor: Gregoire-Besson

He-Va Disc Roller Contour

Description: 510mm fine serrated Sabre discs mounted individually on rubber cushioned legs at fixed stagger but increased cutting angle as working depth is increased hydraulically or using optional electric pre-depth limiter — DRC 300 to DRC 650 £1,114, standard on DRC 800. Working speeds 10-15km/hr.

Model Width / Mounted or Trailed Number of discs Weight Single V Roller Twin V Roller Front paddle levelling tines — mech/hydDRC 300 2.75m / M 22 2,080kg £15,849 £16,449 na

DRC 300 2.75m / T 22 2,630kg £20,904 £21,504 na / £2,711

DRC 350 3.25m / M 26 2,395kg £17,622 £18,289 na

DRC 350 3.25m / T 26 2,945kg £22,950 £23,618 na / £3,140

DRC 450 4.25m / M 34 3,480kg £28,437 na na

DRC 450 4.25m / T 34 4,030kg £33,309 £34,288 na / £,3930

DRC 550 5.25m / M 42 4,190kg £33,284 na na

DRC 550 5.25m / T 42 4,770kg £38,156 £39,277 na / £4,447

DRC 650 6.25m / M 50 4,960kg £37,742 na na

DRC 650 6.25m / T 50 5,510kg £42,816 £44,055 na / £5,710

DRC 800 7.75m / T 64 7,700kg £54,392 na na / £6,955

Note: Weights with Single V Roller.

Options: Top-Cutter full width roller with six chevron pattern blades to deal with cover crop foliage and other residues — 2.75m £5,394, 3.25m £6,263, 4.25m £7,760, 5.25m £8,808, 6.25m £10,087. Soil Mat suspended behind second row of discs — £505 to £1,136; Multi-Seeder 200kg capacity, eight-outlet from £7,359 to £12,126; 12-outlet from £9,071 to £13,082 (plus £1,028 to £2,095 fitting kits) broadcasting or with Accu-Disc double-disc coulters. 600mm Twin V-Profile Ring Roller.

Distributor: OPICO

Horsch Joker CT

Description: DiscSystem 520mm x 6mm notched discs at 17⁰ on both gangs with fixed stagger and mounted in pairs on rubber cushioned legs. Working speeds to 20km/hr, with depth adjustment mechanical by spacers or hydraulic.

BUYERS GUIDE



Kuhn Optimer+

Description: 510mm x 6mm notched or 510mm x 6mm serrated discs mounted individually on rubber cushioned legs at 16⁰ on both gangs to work at 30mm to 100mm depths, adjustable mechanical or hydraulically.

Model Width / Mounted or Trailed Number of discs Weight T-Liner Roller 600mm T-Ring Roller 600mm Front paddle levelling tines — mech/hydOptimer+ 303 3.00m / M 24 1,670kg £17,064 £16,094 na

Optimer+ 353 3.50m / M 28 na £19,457 £18,351 na

Optimer+ 403 4.00m / M 32 2,290kg £24,129 £22,760 na

Optimer+ 403R 4.00m / M 32 2,815kg £29,878 £28,495 na

Optimer+ 4003 4.00m / T 32 4,400kg £34,347 £32,977 na

Optimer+ 503R 5.00m / M 40 3,552kg £33,260 £31,530 na

Optimer+ 5003 5.00m / T 40 4,825kg £41,435 £39,722 na

Optimer+ 603R 6.00m / M 48 3,877kg £37,006 £34,928 na

Optimer+ 6003 6.00m / T 48 5,200kg £48,468 £46,412 na

Optimer+ 7503 7.50m / T 48 5,500kg £60,318 £57,750 na

Note: Weights include T-Ring Roller.

Options: Hydraulic depth control — Optimer+ 303 and 353 £470, 403 to 603R £806, 4003 £934, 5003 to 7503 £1,197. Air seeder £2,821 to £6,337; 40-row distribution head for tractor front hopper feed Optimer+ 4003 to 7503 £3,831 to £4,814; right-hand soil deflector plate (left standard) 303 to 403 and 4003 to 7503 £532, 403R to 603R both standard; ballast 303 to 403 £1,386; wing section depth control wheels 5003 to 7503 £2,399, with hydraulic adjustment on 5003 only £2,969. 600mm Packliner Roller, 550mm Tube Roller. Flexible harrow tines £985 to £2,807.

Distributor: Kuhn Farm Machinery

Horsch Joker RT Classic

Description: DiscSystem 520mm x 6mm notched discs mounted in pairs on rubber cushioned legs for working speeds up to 20km/hr and set at 17⁰ on both gangs with fixed stagger and hydraulic working depth adjustment.

Model Width / Mounted or Trailed Number of discs Weight SteelDisc Packer 580mm

RollFlex Packer 600mm Front paddle levelling tines — mech/hyd

Joker 5 RT Classic 4.75m / T 40 4,660kg £35,920 £34,870 na



Note: Prices include tractor Cat III lower linkage arms adapter. Weight with RollFlex packer.

Options: DuoDrill seeder; side limiter plate £660; 650mm Tyre Packer, 590mm FarmFlex Packer.

Distributor: Horsch

Horsch Joker RT

Description: DiscSystem 520mm x 6mm notched discs mounted in pairs on rubber cushioned legs for working speeds up to 20km/hr and set at 17⁰ on both gangs with fixed stagger and mechanical working depth adjustment with hydraulic optional.

Model Width / Mounted or Trailed Number of discs Weight Double SteelDisc Packer

Double RollPack Packer Front paddle levelling tines — mech/hyd

Joker 5 RT 4.75m* / T 40 5,500kg £43,770 £38,200 na / £5,080

Joker 6 RT 5.75m* / T 48 6,150kg £47,310 £42,210 na / £5,290

Joker 8 RT 7.25m / T 60 7,200kg £57,470 £52,060 na / £6,120

Note: Prices include tractor Cat III lower linkage arms adapter; *Joker 5 RT and 6 RT — working widths 5.00m and 6.00m with side limiter plate.

Options: Hydraulic depth adjustment £1,710. 300mm Knife Roller with six angled blades for chopping cover crop and other residues — 5 RT £8,360, 6 RT £9,270, 8 RT £11,100. DuoDrill seeder. Side limiter plate — 5 RT and 6 RT £1,060, 8 RT £880.

Distributor: Horsch

Horsch Joker CT continued...

Model Width / Mounted or Trailed Number of discs Weight SteelDisc Packer 580mm

RollFlex Packer 620mm Front paddle levelling tines — mech/hyd

Joker 3 CT 3.00m / M 24 1,580kg £12,780 £11,600 na

Joker 3.5 CT 3.50m / M 28 1,800kg £14,990 £13,600 na

Joker 4 CT Rigid 4.00m / M 32 2,080kg £17,960 £16,590 na

Joker 4 CT Folding 4.00m / M 32 2,460kg £21,960 £20,590 na

Joker 5 CT 5.00m / M 40 2,850kg £27,310 £25,780 na

Joker 6 CT 6.00m / M 48 3,280kg £30,320 £28,940 na

Note: Weight includes RollFlex roller on rigid models.

Options: Hydraulic depth control — 3 CT to 4 CT Rigid £560; 4 CT to 6 CT £1,030. Joker 3 CT to 4 CT Rigid — Mono TG front-mounted toolbar with hydraulic depth adjustment to 350mm for TerraGrip coil-spring tines with choice of low disturbance points. Single row of flexible harrow tines. MiniDrill seeder. Ballast weights — 3 CT to 4 CT Rigid £1,050, 4 CT to 6 CT £1,230. Side limiter plate £660.

Distributor: Horsch



Kverneland Qualidisc Farmer

Description: 520mm x 5mm discs with serrated sections between notches; mounted individually on rubber cushioned legs for 20mm to 100mm working depths adjustable hydraulically on all models, plus optional front wing support wheels on trailed models.

Model Width / Mounted or Trailed Number of discs Weight Actipack Roller 565mm

Actiring Roller 540mm Front paddle levelling tines — mech/hyd

Farmer 3000 3.00m / M 24 1,785kg £17,072 £16,628 na

Farmer 3500 3.50m / M 28 2,100kg £19,755 £19,189 na

Farmer 4000 4.00m / M 32 2,419kg £22,230 £21,781 na

Farmer 4000F 4.00m / M 32 2,845kg £28,987 £28,084 na

Farmer 4000T 4.00m / T 32 3,940kg £40,492 £39,589 — / £3,729

Farmer 5000F 5.00m / M 40 3,369kg £33,063 £32,320 na

Farmer 5000T 5.00m / T 40 4,474kg £45,980 £45,237 — / £3,935

Farmer 6000F 6.00m / M 48 3,917kg £37,477 £36,649 na

Farmer 6000T 6.00m / T 48 4,988kg £51,372 £50,544 — / £4,407

Note: Weight includes Actipack Roller.

Options: Trailed model front wing support wheels £2,522. Kverneland a-drill 200 or a-drill 500 seeders; trailed models parallel lift £1,421; Flexible harrow tines ahead of packer £727 to £1,455; 565mm Actipress Twin Roller; road lighting kit £823.

Distributor: Kverneland

Köckerling Rebell

Description: Discs mounted individually on leaf springs. Rebell Classic — 510mm notched discs at 130mm spacing and 16° angle for 20-140mm working depth by pin and hole or optional hydraulic roller adjustment; Rebell Classic T — as Classic with optional paddle levelling tines after second row of discs. Rebell Profiline — 620mm notched discs at 150mm spacing and 17° angle for hydraulically adjusted working depths to 200mm.

Model Width / Mounted or Trailed Number of discs Weight Double STS Roller 520mm/620mm Crumbler Roller Front paddle levelling tines — mech/hyd

Rebell Classic 300 3.00m / M 22 1,490kg £12,890 £11,990 na

Rebell Classic 350 3.50m / M 26 1,700kg £14,430 na na



Rebell Classic 600 6.00m / M 46 3,010kg na £26,520 na

Rebell Classic 500T 5.00m / T 42 5,060kg £36,220 £26,520 na

Rebell Classic 600T 6.00m / T 50 5,410kg £40,340 na na



Rebell Profiline 300 3.00m / M 20 2,450kg £21,200 na na

Rebell Profiline 600 6.00m / T 40 8,840kg £60,390 na na

Rebell Profiline 800 8.00m / T 52 10,230kg £79,670 na na

Options: Flexible tine harrow on U-profile soil-on-soil STS Roller.

Distributor: Samagri

Kuhn Optimer XL

Description: 620mm x 6mm notched discs with fixed stagger mounted Individually on rubber cushioned legs at 14⁰ on both gangs for 50mm to 150mm working depth adjustable on mounted models mechanically by spacers or hydraulically, which is standard on trailed versions, with wing section support wheels optional.

Model Width / Mounted or Trailed Number of discs Weight T-Liner Roller 600mm T-Ring Roller 600mm Front paddle levelling tines — mech/hyd

Optimer XL 300 3.00m / M 24 1,985kg £22,190 £21,151 na

Optimer XL 400 4.00m / M 32 2,595kg £31,378 £30,005 na

Optimer XL 4000 4.00m / T 32 5,150kg na £38,812 na

Optimer XL 5000 5.00m / T 40 5,600kg na £46,758 na

Note: Weights include T-Ring Roller.

Options: Hydraulic depth control — mounted models £470; trailed model wing section support wheels £2,937. Ballast — XL 300 and XL 400 £1,506; 600mm Packliner Roller, 550mm Tube Roller; flexible harrow tines £1,136 to £1,923.

Distributor: Kuhn Farm Machinery

BUYERS GUIDE

Visit our website, your local HORSCH dealer or call 01733 667895.

Joker RTPRECISE AND QUICK STUBBLE CULTIVATION

JOKER RT with levelling bar lets you do more operations with one machine.

— 3m to 12m working widths

— Double packer options

— Aggressive, serrated angled discs



Lemken Heliodor 9

Description: 510mm x 5mm notched discs spaced at 125mm mounted individually on leaf spring legs at a 16.5⁰ angle in a fixed stagger configuration. Individual disc depth adjustment to compensate for tractor wheelings and overall adjustment mechanically by pin and holes or hydraulic cylinders.

Model Width / Mounted or Trailed Number of discs Weight Tube Bar Roller 450mm

Twin U-profile Roller 540mm Front paddle levelling tines — mech/hyd

Heliodor 9/200 2.00m / M 16 570kg poa poa optHeliodor 9/250 2.50m / M 20 712kg £9,000 poa optHeliodor 9/300 3.00m / M 24 852kg poa poa optHeliodor 9/350 3.50m / M 28 968kg poa poa optHeliodor 9/400 4.00m / M 32 1,084kg poa poa optHeliodor 9/400 K 4.00m / M 32 1,791kg poa poa optHeliodor 9/400 KA 4.00m / T 32 2,829kg poa poa optHeliodor 9/450 K 4.50m / M 36 1,859kg poa poa optHeliodor 9/450 KA 4.50m / T 36 2,985kg poa poa optHeliodor 9/500 K 5.00m / M 40 1,928kg poa poa optHeliodor 9/500 KA 5.00m / T 40 3,151kg poa poa optHeliodor 9/600 K 6.00m / M 48 2,206kg poa poa optHeliodor 9/600 KA 6.00m / T 48 3,362kg poa £44,380 optHeliodor 9/700 K 7.00m / M 56 2,482kg poa poa optHeliodor 9/700 KA 7.00m / T 56 3,582kg poa poa optHeliodor 9 Gigant 10/800 8.00m / T 64 4,998kg poa poa optHeliodor 9 Gigant 10/1000 10.00m / T 80 5,560kg poa poa optHeliodor 9 Gigant 10/1200 12.00m / T 96 6,750kg poa poa optHeliodor 9 Gigant 12 S/1600 16.00m / T 128 10,746kg poa £120,000 optNote: K — mounted with folding frame; KA — semi-mounted with folding frame. Weights are without packer.Options: Paddle levelling tines mounted ahead of or behind discs. Solitair disc coulter seed drill for Heliodor 9/300 to 9/400 and 9/400 KA to 9/600 KA. Ballast weights up to 400kg for rigid frames, 500kg for folding frames.Distributor: Lemken

Visit our website, your local HORSCH dealer or call 01733 667895.

Joker RTPRECISE AND QUICK STUBBLE CULTIVATION

JOKER RT with levelling bar lets you do more operations with one machine.

— 3m to 12m working widths

— Double packer options

— Aggressive, serrated angled discs



Minos Disc Tiller

Description: 510mm notched discs mounted individually on rubber-buffered legs at fixed angle and gang stagger, with hydraulic working depth adjustment via crumbler roller.

Model Width / Mounted or Trailed Number of discs Weight Crumbler Roller Twin U-profile Roller 450mm Front paddle levelling tines — mech/hyd

DTM 20 2.50m / M 20 1,130kg poa poa na

DTM 24 3.00m / M 24 1,350kg £6,250 poa na





Note: Models DTM 32 to 40 have a folding frame.

Options: na.

Distributor: Arfon Roberts

Lemken Rubin 12

Description: 736mm x 6mm notched discs for working depths up to 200mm mounted individually on rigid tines with coil spring suspension at 16⁰ (plus 20⁰ incline to the soil) and arranged symmetrically left- and right-facing across both gangs in a fixed stagger configuration. Centre discs on each gang offset from the row for added clearance. Working depths to 200mm with individual disc adjustment to compensate for tractor wheelings and overall adjustment mechanically by pin and holes or hydraulic cylinders on rigid frame models and hydraulically on folding models. Flexible tine impact harrow behind front discs and levelling harrow behind rear discs to control soil flow. Manual or hydraulic swing-round to working and transport positions for outer discs.

Model Width / Mounted or Trailed Number of discs Weight Double Packer 'DD' 600mm


Rubin 12/300 U 3.00m / M 18 2,046kg poa poa na



Rubin 12/400 KUA 4.00m / T 22 4,402kg poa poa na


Rubin 12/600 KUA 6.00m / T 34 6,100kg £67,700 poa na


Note: U — mounted rigid frame, KUA — semi-mounted folding frame. Weights are without packer.

Options: Two-row flexible tine straw harrow for semi-mounted models. Wing support wheels for semi-mounted models; transport support wheel for mounted models.

Lemken Rubin 10

Description: 645mm notched DuraMaxx discs spaced at 125mm for up to 140mm working depth mounted individually on rigid tines with coil spring suspension at 17⁰ in the front gang, 15⁰ at the rear (plus 20⁰ incline to the soil), and arranged symmetrically left- and right-facing across both gangs in a fixed stagger configuration. Centre discs on each gang offset from the row for added clearance. Individual disc depth adjustment to compensate for tractor wheelings; overall adjustment mechanically by pin and holes or hydraulic cylinders on rigid frame models and hydraulically on folding models. Flexible tine impact harrow behind front discs and levelling harrow behind rear discs to control soil flow. Manual or hydraulic swing-round for outer discs working and transport positions.

Model Width / Mounted or Trailed Number of discs Weight Tube Bar Roller 450mm



Rubin 10/300 U 3.00m / M 24 1,630kg £17,800 poa na



Rubin 10/400 KU 4.00m / M 32 2,740kg poa poa na







Rubin 10/700 KUA 5.00m / T 56 5,450kg poa £69,900 na

Rubin 9 Gigant S/800 8.00m / T 64 2,730kg poa poa na



Note: U — mounted rigid frame, KU — mounted folding frame, KUA — semi-mounted folding frame, Gigant — trailed folding. Weights are without packer.

Options: Two-row flexible tine straw harrow for semi-mounted models. Wing support wheels for semi-mounted models; transport support wheel for mounted models.

Distributor: Lemken

BUYERS GUIDE



Ovlac Maxidisc II

Description: 508mm or 610mm notched discs mounted individually on rubber cushioned legs at fixed stagger with mechanical depth adjustment or hydraulic — rigid models £1,230, folding models £2,460.

Model Width / Mounted or Trailed Number of discs Weight Cage Roller 480mm V-Profile Double Disc Roller 600mm Front paddle levelling tines — mech/hyd

Maxidisc II 250/20 2.60m / M 20 1,770kg £11,000 £14,359 na



Maxidisc II 400P/30 4.00m / M 30 2,425kg £18,930 £25,033 na





Maxidisc II 500PT/38 5.00m / T 38 na £30,910 £40,166 na



Note: P versions have folding frame. Prices are for 508mm discs. Weights are with 480mm Cage Roller.

Options: Left-side disc £486; side deflector plates — rigid models £560, folding models £622; road lights £482; trailing kit for all mounted models £7,306. Intermediate or rear-mounted flexible tine harrow £678 to £3,972. 400mm or 520mm notched element packer, 480mm or 540mm crumbler roller, 520mm T- or U-profile roller, 500mm rubber roller.

Distributor: Halse Southwest

WHEN FARMING MEANS BUSINESSWWW.FACEBOOK.COM/KVERNELANDUK

Kverneland Qualidisc Farmer• Easy to lift, reducing soil compaction. • Constant cutting quality due to little lateral movement

of the disc arm.• Heat-treated disc of 520x5mm (hardness 215kg/mm²).• Well-protected maintenance-free disc hub for a long life

time under large pressure at high working speed.



Pöttinger Terradisc

Description: 580mm notched or smooth discs at 125mm spacing with fixed gang-to-gang stagger carried individually on legs mounted two per rubber-cushioned clamp for working speeds up to 18km/hr at 50mm to 150mm working depth adjusted hydraulically using swing-out wafer stops, plus optional hydraulically adjusted wing section support wheels for trailed models. Optional paddle levelling tines before packer £915 to £3,221.

Model Width / Mounted or Trailed Number of discs Weight Pack Ring Roller 550mm

Conoroll Roller 540mm Front paddle levelling tines — mech/hyd

Terradisc 3001 3.00m / M 24 2,065kg £17,431 £16,017 na



Terradisc 4001K 4.00m / M 32 3,355kg £28,722 £26,721 na



Terradisc 4001T 4.00m / T 32 4,585kg £39,552 £40,195 na / £3,650





Note: Terradisc K — mounted folding. Conoroll — single 540mm on 3001 to 4001T, twin 540mm on 5001T to 8001T. Cage Roller — 540mm on 3001 to 6001K, 660mm on 4001T to 10001T. Weights are with 550mm Pack Ring Roller.

Philip Watkins Incorporator

Description: 510mm notched discs mounted individually on legs with rubber cushioning buffers; fixed disc angle and stagger, hydraulic working depth adjustment.

Model Width / Mounted or Trailed Number of discs Weight Flexi-coil Packer Guttler Serrated Ring Roller 560mm Front paddle levelling tines — mech/hyd

Incorporator 3 3.00m / M 22 1,800kg poa na opt

Incorporator 3.5 3.50m / M 26 2,050kg poa na opt

Incorporator 4 4.00m / M 30 2,300kg poa na opt

Incorporator 4 F 4.00m / M 30 2,850kg poa na opt

Incorporator 4 FT 4.00m / T 30 4,000kg na poa opt

Incorporator 4.8 FT 4.80m / T 36 4,800kg na poa opt






Options: Flexible tine straw rake or paddle levelling tines ahead of front discs, single row of flexible tines ahead of rear discs, DD roller, tyre roller.

Distributor: Philip Watkins

Ovlac Eurodisc

Description: 610mm notched discs mounted individually on tines with steel leaf spring protection and fixed gang stagger.

Model Width / Mounted or Trailed Number of discs Weight Cage Roller 480mm V-Profile Double Disc Roller 600mm Front paddle levelling tines — mech/hyd

Eurodisc 250/18 2.50m / M 18 1,830kg £13,549 £16,908 na

Eurodisc 300/22 3.00m / M 22 2,220kg £15,986 £19,890 na

Eurodisc 350/26 3.50m / M 26 2,590kg £18,497 £23,085 na

Eurodisc 350P/26 3.50m / M 26 2,790kg £22,183 n/a na

Eurodisc 400P/28 4.00m / M 28 3,120kg £23,537 £29,640 na

Eurodisc 500P/36 5.00m / M 36 na £29,325 £35,985 na

Eurodisc 550P/38 5.50m / M 38 3,910kg £30,680 £37,971 na

Eurodisc 500PT/36 5.00m / T 36 na £38,991 £45,651 na

Eurodisc 550PT/38 5.50m / T 38 na £40,346 £47,637 na

Note: P versions have folding frame. Weights are with 480mm Cage Roller.

Options: Left-side disc £437, side deflector plates — rigid models £662, folding £432; road lights £478; trailing kit for all mounted models £9,666. 400mm or 520mm notched element packer, 480mm or 540mm crumbler roller, 520mm T- or U-profile roller, 500mm rubber roller.

Distributor: Halse Southwest

BUYERS GUIDE



Proforge Invertamin / Inverta

Description: Invertamin — 510mm notched discs mounted individually on leaf springs, Inverta — 560mm notched or TopStir wavy edge discs mounted individually on rubber cushioned legs, both with fixed gang stagger.

Model Width / Mounted or Trailed Number of discs Weight Rubber Packer Steel Packer Front paddle levelling tines — mech/hydInvertamin 3.0m 3.00m / M 24 1,150kg £5,750 * £6,700 * na

Inverta 1.5m 1.50m / M 12 750kg £4,450 £4,450 na

Inverta 2.7m 2.70m / M 20 1,564kg £8,150 £8,150 na

Inverta 3.0m 3.00m / M 24 1,768kg £8,650 £8,650 na

Inverta 4.0m Folding 4.00m / M 32 3,044kg £13,250 £13,250 na

Inverta 4.0m Folding 4.00m / T 32 3,844kg £17,150 £17,150 na / £3,045







Note: * Invertamin prices are with Crumbler Roller and Tooth Packer. Weights are with Steel Packer.

Options: Inverta 3.0m Mounted — Stoka Bar tractor linkage-mounted soil loosening tines £3,975; DiscBond steel packer. Drawbar and transport wheels kit to convert Inverta mounted implements to trailed format.

Distributor: Agri-linc

DIAMANT 16 – NEW OPTILINE ADJUSTMENT SYSTEM FOR PLOUGHING WITHOUT SIDE PULL

LEMKEN’s Diamant 16 ful� ls ultimate requirements regarding plough technology. The Diamant 16 is not only easy to set up and operate, but impresses above all through its outstanding e� ciency! Experience these highlights and many others, and discover the bene� ts for yourself:

� Up to 10% fuel savings with OptiLine� Greater operator comfort through optional continuously

adjustable hydraulic working depth adjustment

lemken.com

� Improved onland version with increased distance to the furrow edge

� Greater traction with traction booster

Pöttinger Terradisc continued...

Options: Multiline semi-mounted with 125mm spaced tyre packer for solo cultivation — 3001 £22,927, 4001 £27,622; Multiline prepared for piggy-back drill — 3001 £24,218, 4001 £28,913. Hydraulically adjusted trailed model wing support wheels — 8001T £3,670, 1000T £987. Tegosem eight-outlet, 200- and 500-litre capacity air seeder. 540mm and 660mm Cage Roller, 590mm Rubber Packer Roller, 540mm Knife Ring Roller, Rotopack Roller. Single row of flexible harrow tines to mount selected finishing tools — 3.00m to 6.00m £785 to £1,570.

Distributor: Pöttinger



Teagle Multidisc

Description: Multidisc — 510mm notched discs at 800mm gang spacing; Multidisc HXL — 560mm notched discs; Multidisc Vario-S — 560mm notched or wavy-edge discs with retractable hydraulically protected deep soil loosening tines between gangs spaced 1,000mm apart. All mounted individually on rubber cushioned legs with fixed inter-gang stagger and mechanical depth setting by pin and hole adjustment on the packer mounting arms.

Sumo Mixidisc S

Description: 500mm serrated discs mounted in pairs on a common axle on rubber cushioned legs at fixed angle and stagger for 30mm to 140mm working depth with 20mm adjustment increments. Lights, brakes and paddle levelling tines ahead of Multipacka roller standard.

Model Width / Mounted or Trailed Number of discs Weight Multipacka Roller 508mm Packer Roller Front paddle levelling tines — mech/hyd

Mixidisc S3 3.00m / M 24 2,010kg poa na — / std

Mixidisc S4 4.00m / M 32 3,220kg poa na — / std

Mixidisc S5 5.00m / T 40 6,860kg poa na — / std



Note: Weights are with 508mm Multipacka Roller.

Options: na.

Distributor: Sumo

Proforge Invertamax / Invertamax Pro

Description: 620mm notched discs mounted individually on rubber cushioned legs with adjustable gang stagger and mechanical depth control.

Model Width / Mounted or Trailed Number of discs WeightRubbawedge or DiscBond Steel

PackerSoil2Soil Packer Front paddle levelling tines — mech/hyd

Invertamax 3.0m 3.00m / M 24 2,120kg £10,450 na na

Invertamax 4.0m 4.00m / T 32 5,000kg £24,750 na na


Invertamax Pro 5.0m 5.00m / T 40 6,400kg £27,250 £27,250 na


Invertamax Pro 6.0m 6.00m / T 48 7,000kg £29,250 £29,250 na

Note: Weights are with Steel Packer.

Options: Invertamax wing section depth wheel kit £1,475.

Distributor: Agri-linc

BUYERS GUIDE

SUPERIOR QUALITY.THAT’S HOW WE ROLL

DAL-BO UK12A Shepherds Close, Dunkirk,

Aylsham, Norfolk. NR11 6SZ

Tel 012637 32683Fax 012637 32632

E-mail [email protected]

PowerRoll● Available from 10.3 to 18.3m● 5 section roller● Hydraulic weight distribution● 6 year guarantee on Snowfl ake rings● Maintenance free bearings

● LED Road lights● Pre-emergence marker option● Slug pelleter bracket option● Wide choice of ring diameters● 3 ring styles – Cambridge, Crosskill & Cross-Combi

1 third ad with bleed 210x105 Dalbo Powerroll.indd 1 29/04/2019 12:17075-091-Disk harrow guide-V3.indd 88 29/04/2019 12:22


Unia Ares L Plus

Description: 510mm x 4mm serrated or notched discs individually mounted on rubber cushioned legs with fixed angle and stagger and gangs spaced 640mm apart. Working depth adjustment is mechanical.

Model Width / Mounted or Trailed Number of discs Weight Pipe Roller 500mm Terrapac Ring Packer Front paddle levelling tines — mech/hyd

Ares L Plus 2.5M 2.50m / M 20 tbc £5,460 £7,197 na

Ares L Plus 3M 3.00m / M 24 tbc £5,880 £7,965 na

Ares L Plus 3.5M 3.50m / M 28 tbc £6,720 £9,152 na

Ares L Plus 4M 4.00m / M 32 tbc £7,140 £9,920 na

Note: L — rigid frame. In addition to larger diameter discs, Ares L Plus models have a maintenance-free replaceable disc hub.

Unia Ares L

Description: 485mm x 4mm serrated or notched discs individually mounted on rubber cushioned legs with fixed angle and stagger and gangs spaced 640mm apart on Ares L 2.5M to 4M and 800mm apart on Ares LH 4.5M and 6M. Depth adjustment is mechanical.

Model Width / Mounted or Trailed Number of discs Weight Pipe Roller 500mm Toothed Packer Roller Front paddle levelling tines — mech/hyd

Ares L 2.5M 2.50m / M 20 920kg £4,452 £5,402 na

Ares L 3M 3.00m / M 24 1,080kg £4,788 £5,928 na

Ares L 3.5M 3.50m / M 28 1,300kg £5,460 £6,790 na

Ares L 4M 4.00m / M 32 1,420kg £5,880 £7,400 na

Ares LH 4.5M 4.50m / M 36 2,920kg £12,600 £14,310 na

Ares LH 6M 6.00m / M 48 3,420kg £14,952 £17,232 na

Note: L — rigid frame, LH — folding frame. Weights with Pipe Roller.

Teagle Multidisc continued...

Model Width / Mounted or Trailed Number of discs Weight Packer Roller 500mm

Pack Ring Roller 600mm Front paddle levelling tines — mech/hyd

Multidisc 250 2.50m / M 18 830kg £10,330 £11,395 na

Multidisc 300 3.00m / M 22 975kg £11,595 £12,810 na

Multidisc Vario-S 2.50m / M 18 1,865kg £17,305 £18,370 na

Multidisc Vario-S 3.00m / M 22 2,145kg £20,420 £21,635 na

Multidisc XL 400 4.00m / M 30 2,150kg £21,340 £23,160 na



Note: Multidisc HXL models have folding frame. Weights are without packer.

Options: Multidisc 250 and 300 — ballast box £390; all models — soil deflector plate £980; flexible harrow tines for 2.50m and 3.00m models; 600mm DD Ridge Roller, 520mm Crumbler Roller; Vario-S / HXL — road lighting kit £765 / £870.

Distributor: Teagle Machinery

Tel: 01423 324221 E mail: info @krm-ltd.co.uk Web : www. krm-ltd.co.uk

The Disc-O-Mulch features two rows of cutaway discs for high speed shallow cultivation, even residue incorporation and to encourage weed and volunteer seeds to germinate. Each disc is mounted on a patented 3D system, improving

penetration and mixing while at the same time reducing the power and fuel requirement when compared to traditional 2D systems. A patented bar between the discs shatters clods and further improves mixing.

The Disc-O-Mulch features two rows of cutaway discs for high speed shallow cultivation, even residue incorporation and to encourage weed and volunteer seeds to germinate. Each disc is mounted on a patented 3D system, improving

penetration and mixing while at the same time reducing the power and fuel requirement when compared to traditional 2D systems. A patented bar between the discs shatters clods and further improves mixing.

Cultivate, Mix, ConsolidateCultivate, Mix, Consolidate



Weaving Shortdisc

Description: 560mm notched discs working at 20mm to 125mm depths mounted individually on rubber cushioned legs with fixed gang-to-gang disc stagger and standard-fit soil deflection side boards. Mechanical depth adjustment with hydraulic option fitted as standard on 6M.

Model Width / Mounted or Trailed Number of discs Weight 'V' Ring Roller 600mm Packer Roller Front paddle levelling tines — mech/hydShortdisc 3M 3.00m / M 24 tbc £6,800 na na

Väderstad Carrier XL

Description: 510mm serrated discs at 125mm spacing or 610mm serrated or CrossCutter discs mounted individually on rubber cushioned legs with MultiSet disc angle adjustment but fixed stagger for up to 150mm working depth, adjustable hydraulically, at 10-15km/hr. XL 425 to XL 625 have discs arranged in same direction (V-Disc) or left- and right-facing on the same gang (X-Disc); XL 925 and XL 1225 also have discs left- and right-facing on the same gang (X-Disc).

Model Width / Mounted or Trailed Number of discs Weight SteelRunner 550mm U-Profile SoilRunner 575mm Front paddle levelling tines — mech/hyd

Carrier XL 425 4.10m / T 32+1+2 5,600kg £41,880 poa £3,905



Carrier XL 925 9.15m / T 76+1 10,400kg £89,060 poa na

Carrier XL 1225 12.15m / T 100+1 13,100kg £112,305 poa na

Note: Weights are with single SteelRunner packer. Priced with single SteelRunner packer, double SteelRunner optional.

Options: Straw Harrow comprising two rows of flexible harrow tines or CrossCutter Knife multi-bladed roller to process cover crop foliage and surface residues. Double 575mm SoilRunner U-profile packer. BioDrill air seeder £11,165 to £12,945.

Distributor: Väderstad

Väderstad Carrier

Description: 450mm serrated discs at 125mm spacing mounted individually on rubber cushioned legs; all models have discs arranged left- and right-facing on the same gang (X-Disc). Disc angle is fixed at 16° on both gangs but disc stagger is mechanically adjustable by turnbuckle. Working depth is to 120mm (adjustable hydraulically), working at 10-15km/hr.

Model Width / Mounted or Trailed Number of discs Weight SteelRunner 550mm U-Profile SoilRunner 575mm Front paddle levelling tines — mech/hyd

Carrier 300 3.00m / M 24 1,800kg £13,645 poa na



Carrier 420 3.94m / T 32 4,300kg £31,640 poa £6,255

Carrier X 425 4.25m / M 34 3,200kg £25,070 poa na

Carrier 500 4.94m / T 40 4,900kg £37,110 poa £7,450



Carrier 650 6.44m / T 52 5,800kg £44,245 poa £7,885

Carrier 820 7.94m / T 64 7,700kg £52,720 poa na

Carrier 925 8.94m / T 72 9,100kg £74,795 poa £6,580

Carrier 1225 12.25m / T 98 11,700kg £104,305 poa na

Note: Weights are with single SteelRunner packer.

Options: 470mm TrueCut notched or CrossCutter discs. Carrier 420 to 1225 — Straw Harrow comprising two rows of flexible harrow tines or CrossCutter Knife multi-bladed roller to process cover crop foliage and surface residues. All models — BioDrill air seeder £7,285 to £12,945. 586mm RubberRunner packer; Carrier 300 to X 625 — CageRunner crumbler roller, 586mm RubberRunner roller. Carrier X 425 to X 625 — galvanised frame. Carrier 300 to 400 — drawbar for conversion to trailed (only with RubberRunner packer) £1,860.

Distributor: Väderstad

Unia XL

Description: 560mm x 4mm serrated discs individually mounted on rubber cushioned legs with fixed angle and stagger and gangs spaced 800mm apart. Single row of flexible harrow tines ahead of packer and mechanical or hydraulic working depth adjustment.

Model Width / Mounted or Trailed Number of discs Weight V-Sem Roller 600mm Packer Roller 700mm Front paddle levelling tines — mech/hydAres XL 3M 3.00m / M 24 1,530kg £6,966 £9,051 na

Ares XL 3.5M 3.50m / M 28 1,875kg £7,776 £10,208 na

Ares XL 4M 4.00m / M 32 2,085kg £8,667 £11,447 na

Ares XLH 4M 4.00m / M 32 2,470kg £11,259 £14,039 na

Ares XLH 4.5M 4.50m / M 36 3,075kg £12,960 £16,087 na

Ares XLH 6M 6.00m / M 48 3,630kg £14,931 £19,101 na

Ares XLH 7.5M 7.50m / M 60 4,485kg £16,906 £22,118 na

Note: XL — rigid frame, XLH — folding frame. Weights with Pipe Roller.

Options: Serrated discs on Vibro springs. 500mm Toothed Packer roller, 600mm Spiral roller, 600mm Spring roller, 600mm U-profile roller with paddle tines, 600mm T roller with paddle tines.

Distributor: Manterra

BUYERS GUIDE

Contact your local dealer or phone us on 01302 751200www.amazone.co.uk

Twice the machine - twice the performance

The New Amazone Ceus disc and tine cultivator.

The combined action of a compact disc harrow for shallow stubble cultivation with a tine section for deep loosening, makes the Ceus-2TX cultivator the most flexible soil tillage implement in this sector.

Working widths from 4m to 7m

Ideal for all forms of soil tillage - from primary cultivation through to seedbed preparation

Both disc and tine elements can be run either together or in isolation adding to the flexibility

Choice of rollers to suit your soil type.

Hydraulic control allows the disc and tine segments to be adjusted independently.



Ziegler Disc Master Pro

Description: 560mm x 5mm notched or serrated discs at 225mm spacing with 900mm spacing between the fixed stagger gangs and left and right fixed soil deflectors standard. Mechanical working depth adjustment on Disc Master Pro 3001 to 4501 with hydraulic optional; hydraulic depth setting standard on Disc Master Pro 5001 and 6001.

Model Width / Mounted or Trailed Number of discs Weight Steel Ring Roller 600mm

Spring Balance Roller 550mm Front paddle levelling tines — mech/hyd

DM Pro 3001 3.00m / M 24 1,650kg £14,335 £13,460 na

DM Pro 4001 4.00m / M 32 2,680kg £21,245 £21,175 na

DM Pro 4501 4.50m / M 36 2,840kg £22,665 £22,585 na

DM Pro 4001 T 4.00m / T 32 na £27,535 £27,465 na

DM Pro 4501 T 4.50m / T 36 na £28,965 £28,885 na

DM Pro 5001 5.00m / T 40 5,400kg £42,575 £42,465 na

DM Pro 6001 6.00m / T 48 5,860kg £48,520 £46,770 na

Note: Disc Master Pro 3001 has rigid frame, all others hydraulic folding. Weights are with Crumbler Roller.

Options: Hydraulic depth adjustment for Disc Master Pro 3001 to 4501 — £905 to £1,490. Hydraulic wing support wheel adjustment on Disc Master Pro 5001 and 6001 — £1,490. Disc Master Pro 3001 — mechanical folding end discs standard, hydraulic £1,300. Flexible harrow tines. APV air seeder mounting. 600mm Crumbler roller, 600mm Roof Ring roller, 540mm U-profile roller. Road light carrier £400 to £710.

Distributor: Abrey Agricultural

Weaving Shortdisc continued...

Shortdisc 4M 4.00m / M 32 tbc £11,400 na na



Shortdisc 5M 5.00m / T 40 tbc £20,400 na na

Shortdisc 6M 6.00m / T 48 tbc £23,800 na na

Note: Weights are with 600mm 'V' Ring Roller.

Options: Shortdisc 3M hydraulic depth adjustment £880, Shortdisc 4M to 6M mounted and 5M trailed £1,680 (standard on 6M).

Distributor: Weaving Machinery

Contact your local dealer or phone us on 01302 751200www.amazone.co.uk

Twice the machine - twice the performance

The New Amazone Ceus disc and tine cultivator.

The combined action of a compact disc harrow for shallow stubble cultivation with a tine section for deep loosening, makes the Ceus-2TX cultivator the most flexible soil tillage implement in this sector.

Working widths from 4m to 7m

Ideal for all forms of soil tillage - from primary cultivation through to seedbed preparation

Both disc and tine elements can be run either together or in isolation adding to the flexibility

Choice of rollers to suit your soil type.

Hydraulic control allows the disc and tine segments to be adjusted independently.


Documents

Short disc cultivators: Compact disc harrows