Embed Size (px)
Citation preview
SGI Model 8441 Vacuum Distillation Apparatus
SGI Distillation Glassware for use with ASTM Method D-1160 2006 edition Standard Test Method for Distillation of Petroleum Products at Reduced Pressures. Assembly includes: • All necessary glassware • Joint clamps, # 35 • High temperature heating mantle • Fixed position thermocouple assembly • Aluminum mounting cabinet with mounting clamps • All vinyl tubing necessary for water connections
on column and receiver
Complete Assemblies
8441-G Complete assembly110V 2006 ASTM version.
8441-G-230 Complete assembly 230V 1987 ASTM version.
8441-G–06 Complete assembly 115V 2006 ASTM version PRT
Thermocouple vacuum adapter plus extra Trap
8441-G-230-06 Complete assembly 230V-2006 ASTM version
PRT Thermocouple, extra Trap & Adapter.
8441-F Distillation Apparatus glassware only 1987 version.
8441-F-06 Distillation Apparatus glassware only for 2006 ASTM
version, extra Trap & Adapter
8441-DTI-II Control Center 110V, J type Thermocouple for 1987
ASTM version.
8441-DTI-II-230 Control Center 230V J type Thermocouple for
1987 ASTM version 230 VAC
8441-DTI-II-06 Control Center 110V PRT Thermocouple for
1995-2006 ASTM version.
8441-DTI-II-06-230 Control Center 230VAC PRT Thermocouple
for 1995-2006 ASTM version.
Replacement Parts
8441-A Vacuum Jacketed Column
8441-B 200ml Jacketed Receiver
8441-C Dewar Style Cold Trap
(2 required for 95-06 version)
8441-D Vacuum Adapter
8441-E 500ml quartz Flask
8441-E1 Thermocouple Kovar Tip (87 version only)
8441-E2 Heating Mantle 470 Watts, 120 VAC
8441-E2-220 Heating Mantle 470 Watts, 230 VAC
8441-E2-T115 Heating Mantle top 140 Watts, 120 VAC
8441-E2-T220 Heating Mantle top, 140 Watts, 230 VAC
8441-E3 Aluminum housing complete w/mounting
clamps, spring leashes, but without Heating Mantle
8441-E5 Vacuum Adapter for Shepherds Crook
J type thermocouple. (87 version only)
8441-E6 Shepherds Crook J type (87 version only)
8441-E7 PRT Thermocouple Adapter (95-06 version)
8441-D7-1 Silicon insert with cap for above Adapter
8441-E8 9” (254 mm) PRT Thermocouple (Overhead)
8441-E10 6” (152 mm) PRT Thermocouple (Flask)
8441-H One set of replacement Viton O-rings , 12 per set
8441-DTI-II-06
8441-G-06
Scientific Glass & Instruments, Inc. P.O. Box 6 Houston, Texas 77001-0006 USA 713-682-1481 fax 713-682-3054 [email protected] www.sginstr.com
8441-A Vacuum Jacketed Column
8441-B 200ml Jacketed Receiver
8441-C Dewar Style Cold
8441-C1 Dewar Style Cold
8441-D Vacuum Adapter
8441-E 500ml quartz Flask
8441-E2 Heating Mantle 470 Watt, 120 VAC
8441-E2-220 Heating Mantle 470 Watts, 230
8441-E3 Aluminum housing complete w/mounting
clamps, spring leashes, but without Heating Mantle
8441-E7 PRT Thermocouple
Adapter (95-06 version)
8441-E10 6” (152 mm) PRT Thermocouple
8441-E8 9” (254 mm) PRT
Thermocouple Overhead)
31000-35 SS Joint-Clamps,4 required
8441 Part Breakdown
8441-DTI-II-06 115 or 230 VAC Controller Unit
TYPICAL ASTM D-1160-06 GLASSWARE SETUP
