Presented by Functional Safety Engineering Services

Services and Capabilities

IntroductionOur Story

3

Our Story

Functional Safety Enginereing Services Ltd. (FSES) was established in response to the much

needed conformance to the international standards IEC 61508 for Electrical/Electronic and

Programmable Electronic Safety Related Systems and its derivatives IEC 61511, IEC 61513,

IEC 61505 etc.

Our mission has always been to be the number one global functional safety consultancy,

delivering services to various industries where compliance is required.

We have come a long way since our establishment, delivering large Quantitative Risk

Assessments in Saudi Arabia, Process Hazard Assessment workshops in various countries in

the Middle East and technical consultancy services globally.

With experience gained working with (and as) end users, Engineering Procurement and

Construction (EPC) companies and system integrators. FSCL has the underpinning knowledge

of Functional Safety standards and has gained significant experience in its application;

subsequently we are competent in providing practical solutions that emphasis the application of

appropriate level of rigour.

Our solutions and services are tried and tested, implemented by major operators in the process

industry and accepted by regulating bodies including the Health and Safety Executive (HSE).

The Safe

Way

Is the

Best Way

Who We Are

6

Who are We & Why Us?

Functional Safety Engineering Services are an engineering

consultancy company built on experience and expertise in the

field of functional safety.

Our consultants are able to support clients in the functional

safety aspects of the processes, systems and equipment for

the oil and gas, petrochemical, utilities (including green

technologies), military and manufacturing industries.

• TÜV Functional Safety Engineers

• Quality focused through ISO 9001 Management Systems

• Functional Safety Management Experts

• Globally Established Consultants

7

Meet our Team

Peter Hall Martin Snow Amir Akhlaghi Mohammed BhaimiaManaging Director Commercial Director Engineering Director Senior Consultant

IndustriesWhere We Work

Industries

9

Oil & Gas Upstream

• Offshore Platforms

• Drilling

• Wellheads

Oil & Gas Downstream

• Gas Treatment Plants

• Tank Farms

• LPG Storage & Distribution

• Compressor Stations

• LNG Processing Plants

Process

• Gas & Oil Separation Plants

• Gas Plants

• Petrochemicals

Power Generation

• Hydroelectric Power

• Wind Farms

Water & Waste Water

• Water & Waste Water Plants

• De-Sanitation Plants

• Reservoirs

• Pumping Stations

Green Technology

• Wind Farms

• Solar Powered Generation

• Hydro Power Generation

• Bio-Fuels

Our ServicesWhat we do

Process Hazard Analysis (PHA)

11

FSES can provide experienced facilitators for:

• PHA, HAZOP, HAZAN, HAZID and CHAZOP studies.

FSES can conduct the study at various phases of the

facility, including:

• Conceptual Engineering

• Pre-FEED

• FEED

• Detailed Design

• EPC

FSES can conduct the study for various industries,

including (but not limited to):

• Oil and Gas

• Process

• Machinery

Including HAZOP, HAZID, HAZAN and CHAZOP

SIL Determination

12

FSES can provide experienced facilitators for SIL

Determination studies, using:

• LOPA and Risk Graph methodologies.

FSES can provide the following consultancy services:

• Fault Tree Analysis

• ALARP Calculations

• Determining Appropriate Risk Criteria

• Cost Benefit Analysis

FSES can conduct the study for various industries,

including (but not limited to):

• Oil and Gas

• Process

• Water and Waste Water Treatment

• Pharmaceuticals

Including LOPA, FTA and Risk Graph

SIL Verification

13

FSES can conduct SIL Verification studies, using:

• Reliability Block Diagrams and FTA.

FSES can provide the following consultancy services:

• Construction of RBD’s / Fault Trees

• Failure Modes Effects and Criticality Analysis

(FMECA)

• Hardware Reliability

• Systematic Capability

• Architectural Constraints

FSES can conduct the study for various functions, including

(but not limited to):

• ESD Functions

• F&G Functions

• HIPS Functions

Including LOPA, FTA and Risk Graph

Quantitative Risk Assessment

14

A QRA is a formalized tool for assessing the risk exposure

to employees, the environment, company assets and its

reputation.

FSES can conduct QRA’s using:

• PHAST Risk and FSES In-House Tool.

A Typical FSES QRA would include the following:

• Calculation of Individual Risk Per Annum (IRPA) and

Potential Loss of Life (PLL).

• Consequence Analysis and Dispersion Modelling.

• Cost Benefit Analysis.

• Risk Frequency Calculations.

• Cumulative Risk Frequency (F-N Curves)

• Tolerable levels of risk analysis

• Risk contours (Location Specific Individual Risk

(LSIR))

Quantitative Risk Assessment

15

Typical QRA Lifecycle

Value Improvement Engineering

16

FSES are able to conduct Value Improvement Engineering

(VIP) Studies to assess the following:

• Classes of Facility Quality

• Customizing standards and specifications

• Design for Maintainability

• Design to Capacity

• Energy Optimization

• Process Simplifications Assessment

• Reliability Simulations Modelling

• Reliability Centered Maintenance (RCM)

• Reliability, Availability and Maintainability Study

(RAMS)

• Waste Minimization

Plant Life Extension

17

FSES are able to provide specialist studies on safety,

reliability and optimization of plants during their operational

lifetime, through:

• Functional Safety Audits to demonstrate ongoing

compliance

• Reliability studies (RAMS and RCM) to identify risk to

business due to asset failure

• Optimization studies to increase efficiency through

improved control and safety systems

• Human factors studies to minimize and control the

risks associated with human errors

Flow Assurance

18

FSES can conduct Static, Dynamic and Transient

Process simulations for the calculation of the Process

Safety Time, Reaction Time and to Optimize Process

Control using industry recognized tools.

Fire & Gas Systems

19

FSES provide specialist Fire & Gas System

studies including:

• F&G Philosophies

• F&G Zoning

• F&G Cause and Effects and ESD level

tie in

• Equipment Selection and Feasibility

Studies

• F&G Mapping and detector layout

optimization

Functional Safety Management

20

FSES provide specialist Functional Safety

Management Studies including:

• IEC 61508 compliance

• IEC 61511 compliance

• Compliance with relevant international

standards

• Functional Safety Audits

• Functional Safety Assessments

• Assessment of Legacy Systems

• Ability to review / setup FSM systems

• Assistance in achieving CASS

accreditations

System Capability Certification

21

FSES provide specialist certification of components and

systems using various methodologies, including:

• Failure Modes, Effects and Diagnostics Analysis

(FMEDA)

• Documentation Analysis and Review

• Prior Use Assessment

• Proven In Use Assessment

• FSES has extensive experience in providing product

safety capability assessments to the requirements of

IEC 61508 (up to and including SIL 3)

• FSES can determine the SIL capability of a product

through qualitative and quantitative methods.

Technical Consultancy

22

FSES are experts in providing control and high-integrity

safety systems solutions with extensive design and

manufacturing experience in the process and safety

industries.

FSES can provide additional support through:

• Optimum Replacements intervals

• Spares analysis

• Development of Safety Manuals

• Development of Proof Testing Procedures

• Safety Requirements Specifications

• Building Risk Assessments

• Dropped Objects Analysis

• Escape, Evacuation and Rescue Analysis

• Noise Study

Functional Safety Training

23

FSES offers training courses which can be given in-house or at

the customers site. FSES will customize training courses to meet

particular company requirements. The training programs will

provide engineers and their companies with the best way of

learning about automation reliability, availability and safety. The

company will explain standards and technologies in the design,

production or manufacture of safety-related systems.

A training course is essential if you are:

• To fully understand and apply IEC 61508/61511

• Involved in the design, production or manufacture of

safety related systems

• Responsible for determining if the standard is applicable

to your organization

• Accountable for safety management in your organization

Our PortfolioTake a look at our latest projects

Global Clients

25

10%

5%85%

26

Our Recent Clients

LTHE

OTTCOSaudi Aramco Saipem

MPCWorleyParsons

27

Hasbah Offshore Gas Facilities Increment II – EPC Safety

Studies

FSES conducted a range of safety studies for the Hasbah II facilities including:

Hasbah II

Recently CompletedHasbah Offshore Gas Facilities Increment II – Saudi Aramco | LTHE

• HAZID • Dropped Objects • EERA • QRA

• HAZOP • Fire, Explosion and Toxic

Gas Dispersion

• BRA • SRS

• Noise Study • F&G 3D Mapping • SIMOPS • SIL Assessment

Get in touchWe want to hear from you

29

Get in Touch

Head Office

Passfield Business Centre

Lynchborough Road, Hampshire

GU30 7SB, UK

Global Offices

Asia, Europe and Middle East

Our Phone

+44 1428 333 333

Email / Website

info@fses.global

www.fses.global