Service Bulletin No. 2926 - Pre-Owned Coach Search | …service.mcicoach.com/ServiceInfo/ServiceBulletins.nsf/656d2ee39f... · service bulletin no. 2926 model ... mci’s liability

  • View
    215

  • Download
    1

Embed Size (px)

Text of Service Bulletin No. 2926 - Pre-Owned Coach Search |...

  • Printed in Canada

    Service Bulletin No. 2926MODEL TYPE SECTION/GROUP DATE

    SUBJECT

    CONDITIONS

    Feb. 8, 2006

    MCI FLEET SUPPORT TRAINING PROGRAM FOR 2006

    Service Information OnlyService InformationD4000 / D4005 / D4500 /D4505 / E4500 / J4500

    Motor Coach Industries is pleased to announce the Fleet Support Training Program for 2006. This Training Program,located in Illinois, Ohio, New Jersey, Texas, Tennessee, Florida, California, Quebec, British Columbia and Manitobais intended to give the participants the necessary knowledge to properly repair and maintain D4000, D4005, D4500,D4505, E4500 and J4500 model coaches.

    PURPOSE:The intent of this Training Program is to provide the participants with a basic understanding of theMCI coach systems.The skills required of your technicians are constantly changing to meet the challenges of ever-changing technology.Component locations and descriptions, system function and operation, troubleshooting techniques and minormaintenance will be discussed. MCI training provides an effective mix of theory-based classroom instruction andpractical, hands-on learning with MCI instructors that are industry experts with real world service experience and areknowledgeable in the latest skill-based instructional techniques. Training material and information packages will beprovided andmaybe taken home by the participants. Although the training is geared towardsmaintenancepersonnel,mechanically-inclined drivers, driver trainers or operations staff may also benefit.

    NEW FOR 2006:New courses and four new course locations have been added.Spanish-language courses offered in select locations.

    Custom designed training courses, tailored specifically to your fleet and conducted at your site, are available.

  • 2006 Motor Coach Industries International, Inc. and its subsidiaries. All rights reserved.

    USAIllinoisMCI Fleet Support Service Center10 E. Golf RoadDes Plaines, IL 60016800-743-3624

    OhioMCI Fleet Support Service Center219 West Campbell StreetLoudonville, OH 44842877-754-4404

    MinneapolisC&J Bus Repair9010 Pillsbury Ave. Bloomington, MN 55420952-881-0034

    New JerseyMCI Fleet Support Service Center14 Harmon DriveBlackwood, NJ 08012800-262-1287

    TexasMCI Fleet Support Service Center9787 Clifford DriveDallas, TX 75220800-248-4942

    Tennessee MCI Fleet Support Service Center 215 Maddox Simpson Parkway, Lebanon, TN 37090800-927-5041

    FloridaMCI Fleet Support Service Center3718 LB McLeod RoadOrlando, FL 32805800-390-0287

    CaliforniaMCI Fleet Support Service Center10850 Portal DriveLos Alamitos, CA 90720800-777-4101

    CANAdAMCI Fleet Support Service Center1400 Barre StreetMontreal, QC H3C 1N4800-663-3328

    MCI LTD1475 Clarence Ave.Winnipeg, MB R3T 1T5800-241-2947

    Western Bus Parts and Service95 Philip AveNorth Vancouver, BC V7P 2V5604-980-4844

    New adva

    nced cours

    es

    Expanded

    course loc

    ations

    Course Locations

    Motor Coach Industries TechnicAL Training Institute

    2006 Schedule

    Learn from experienceDedicated to advancing the skill levels of motor coach operators technicians, MCI Fleet Support training program for 2006 includes:

    New courses added

    Basic and advanced courses in maintenance and repair covering new technologies including electrical, ABS, steering and suspension systems for all current production MCI coach models

    Experienced instructors, with advanced-track courses taught by MCIs top technical pros

    Hands-on learning environments for all basic as well as complex skills

    Certification awarded to successful graduates

    Spanish-language courses offered in select locations

    Customized training upon request

    New course locations include Vancouver, Winnipeg, Minneapolis and Lebanon, Tenn, near Nashville area at the newest MCI Sales and Service center

    Please see back page for course locations.

    Customized regional training and on-site

    operator training available through special

    arrangement. MCI offers custom-designed

    training to meet your technicians and service

    shops specific needs at your location.

    CertificationTechnicians successfully completing the ex-

    aminations after each training module will be

    certified by MCI as proficient in that system and

    model. Technicians successfully completing the

    examinations for all modules offered for the MCI

    coach model will receive designation as an MCI

    Master Mechanic for that specific model.

    FeesFees as noted are per person. per course and

    include all course materials. (Lodging and travel

    are not included.)

    RegistrationPlease fill out the enclosed registration form and

    fax it to us at 502-318-8131.

    QuestionsFor more information, call 701-825-5227, or

    502-318-3000 ext. 3577 or fax us at 502-318-8131

    or e-mail [email protected]

    Schedule and fees subject to change without

    notice.

    MCI Training Team from left: Carlos Ponce, Steve Kiner, Skip Neff, Anthony (Tony) Pascarella and William (Gator ) Pryne.

  • Air Production / Basic Cost: $375All Current Production Models

    LOCATION COURSEDATE

    Montreal 8/158/16Nashville area 5/25/3Vancouver 9/129/13Winnipeg, MB 3/143/15

    Air System / Basic (Spanish) Cost: $375All Current Production Models

    LOCATION COURSEDATE Dallas 3/9Los Alamitos 3/23Orlando 8/10

    Electrical / Basic Cost: $375All Current Production Models

    LOCATION COURSEDATE Montreal 4/184/19Nashville area 2/72/8Vancouver 6/206/21Winnipeg, MB 1/171/18

    Electrical / Basic (Spanish) Cost: $375All Current Production Models

    LOCATION COURSEDATE Dallas 3/7Los Alamitos 3/21Orlando 8/8

    Electrical - I/O / Advanced Cost: $250All Current Production Models

    LOCATION COURSEDATE Blackwood 2/22Dallas 4/26Des Plaines 9/27Los Alamitos 5/24Loudonville 6/28Montreal 8/9Nashville area 3/8Orlando 8/23Winnipeg, MB 3/29

    Electrical - MCI / Advanced Cost: $250All Current Production Models

    LOCATION COURSEDATE Blackwood 2/21Dallas 4/25Des Plaines 9/26Los Alamitos 5/23Loudonville 6/27Montreal 8/8Nashville area 3/7Orlando 8/22Winnipeg, MB 3/28

    HVAC / Basic Cost: $375All Current Production Models

    LOCATION COURSEDATE Montreal 4/204/21Nashville area 2/92/10Vancouver 6/226/23Winnipeg, MB 1/191/20

    HVAC / Basic (Spanish) Cost: $375All Current Production Models

    LOCATION COURSEDATE Dallas 3/8Los Alamitos 3/22Orlando 8/9

    HVAC / Advanced Cost: $250All Current Production Models

    LOCATION COURSEDATE Blackwood 2/23Dallas 4/27Des Plaines 9/28Los Alamitos 5/25Loudonville 6/29Minneapolis 2/212/23Montreal 8/10Nashville area 3/9Orlando 8/24Winnipeg, MB 3/30

    HVAC / 608 Certification Cost: $750All Current Production Models

    LOCATION COURSEDATE Blackwood 2/283/3Dallas 5/165/19Des Plaines 2/142/17Los Alamitos 6/66/9Loudonville 7/117/14Nashville area 3/283/31Orlando 8/18/4

    Powertrain - S60 Cost: $250All Current Production Models

    LOCATION COURSEDATE Blackwood 3/21Dallas 10/24Des Plaines 9/19Los Alamitos 4/18Loudonville 5/16Montreal 7/25Nashville area 2/14Orlando 6/20Winnipeg, MB 8/15

    Powertrain - Caterpillar Cost: $250All Current Production Models

    LOCATION COURSEDATE Blackwood 3/22Dallas 10/25Des Plaines 9/20Los Alamitos 4/19Loudonville 5/17Montreal 7/26Nashville area 2/15Orlando 6/21Winnipeg, MB 8/16

    Powertrain - Allison/ZF Cost: $250All Current Production Models

    LOCATION COURSEDATE Blackwood 3/23Dallas 10/26Des Plaines 9/21Los Alamitos 4/20Loudonville 5/18Montreal 7/27Nashville area 2/16Orlando 6/22Winnipeg, MB 8/17

    Steering/Suspension / Basic Cost: $375All Current Production Models

    LOCATION COURSEDATE Montreal 8/178/18Nashville area 5/45/5Vancouver 9/149/15Winnipeg, MB 3/163/17

    Vehicle Dynamics Cost: $250d Models

    LOCATION COURSEDATE Blackwood 1/31Dallas 5/9Des Plaines 3/14Los Alamitos 10/10Loudonville 2/21Montreal 8/29Nashville area 4/25Orlando 7/18Winnipeg, MB 6/13

    E ModelsLOCATION COURSEDATE Blackwood 2/1Dallas 5/10Des Plaines 3/15Los Alamitos 10/11Loudonville 2/22Montreal 8/30Nashville area 4/26Orlando 7/19Winnipeg, MB 6/14

    J ModelsLOCATION COURSEDATE Blackwood 2/2Dallas 5/11Des Plaines 3/16Los Alamitos 10/12Loudonville 2/23Montreal 8/31Nashville area 4/27Orlando 7/20Winnipeg, MB 6/15

    Motor Coach Industries TechnicAL Training Institute 2006 Schedule

  • q Customized Class Information Requested

    C O M P A N Y I N F O R M A T I O N (Please Print)

    S T U D E N T I N F O R M A T I O N (Please Print)

    Company Name (Please use full name)

    Company Street Address

    City / Province

    Authorizing Person

    Company Phone Company Fax

    E-mail (optional)

    State Zip/postal code

    Title Department

    Student Name

    Course Requested

    Course Requested

    Position

    Location Requested

    Location Requested Date(s) of Course

    Date(s) of Course

    Please Note: Class sizes are limited, and will be accepted on a first come first served basis.

    Class registrations MUST be received a minimum of 3 calendar weeks (15 working days) prior to scheduled date of class.

    Confirmations will be sent at least 3 weeks prior to scheduled date of class.

    Lodging, meals, and transportation to and from the training location are not covered in the registration fees

    MOTOR COACH INDUSTRIES INTERNATIONAL, INC., ITS AFFILIATES, AND THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, AND AGENTS (COLLECTIVELY MCI) MAKE NO REPRESENTATION OR WARRANTIES, EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FIT-NESS FOR A PARTICULAR PURPOSE) REGARDING ANY COURSE, INSTRUCTION, CERTIFICATION, OR ANY OTHER SERVICES FURNISHED BY MCI IN CONNECTION WITH THE TRAINING. IN NO EVENT WILL MCI BE LIABLE, WHETHER IN CONTRACT, TORT (INCLUDING ANY ACTUAL OR ALLEGED NEGLIGENCE OF MCI), OR OTHERWISE, FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, PUNITIVE, ENHANCED, RELIANCE, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS). IF, NOTWITHSTANDING THE FOREGOING, MCI IS DETERMINED TO BE LIABLE IN CONNECTION WITH ANY TRAINING SERVICES FURNISHED BY MCI, MCIS LIABILITY SHALL BE LIMITED TO REFUNDING THE PRICE PAID BY THE PLAINTIFF/CLAIMANT TO MCI FOR SUCH SERVICES.

    BASIC COURSES $375/course

    Electrical English q Spanish qHVAC English q Spanish qAir Production/PM English q Spanish qSteering/Suspension English q Spanish q

    HVAC 608 CERTIFICATION q $750

    ADVANCED COURSES $250/course

    CHECK ALL THAT APPLY PAYmEnT InformATIon

    q Check Make check payable to: Motor Coach Industries

    q MCI Account MCI Service Parts Account #: _____________________

    q Credit Card Complete Information Below

    Card Type q VISA q MC q AMEX

    Card Number ____________________________________ Exp. Date _______

    Name on card _____________________________________________________

    Authorization signature ____________________________________________

    Motor Coach IndustriesAttn: Technical Training Department7001 Universal Coach DriveLouisville, KY 40258

    Or Fax your registration to: 502-318-8131Or E-mail to [email protected]

    Mail yourEnrollMEnt

    ForM to:

    Course Requested Location Requested Date(s) of Course

    2006 Registration Form

    ElectricalI/O qElectricalMCI qEngineS60 qEngineCAT qB500/ZF q

    HVAC qVehicle DynamicsD qVehicle DynamicsE qVehicle DynamicsJ q