Embed Size (px)
Citation preview
Photo courtesy of Hanlon Windows Australia
Ser ies 456Commercia l Awning Window
DATE: MAY 2013 | REPLACES: MARCH 2008
CO
MM
ER
CIA
L S
ER
IES
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
MORE INFORMATION For the latest updates regarding this product visit our website www.elevatealuminium.com.au
2D & 3D CAD FIlEs AvAIlAblE To access 2D & 3D CAD models visit our online specifier resource centre www.specifyaws.com.au
KEY FEATUREs/PERFORMANCE CHARACTERIsTICs
Maximum Panel Height* 2100mm
Maximum Panel Width* 1210mm**
Maximum Glass Thickness ≤20mm
• Residential awning sashes inlaid directly into shopfront framing.
• Dedicated head and sill to accept awning sashes with manual chain winders and Standard 30mm or alternative 44mm nailing fin jambs. We also have a double glazed 44mm nailing fin frame for those projects with double glazed fixed highlights or lowlights.
• Complies with AS 2047, with a high water resistance of 450Pa. Has a very low air infiltration that makes this product suitable for air conditioned buildings.
• Besides the standard manual chain winders, the awning sashes can be fitted with concealed electric chain winders or cam handles.
• Flyscreens can be fitted behind awning sashes with winders as shown below.
• Wrap around light sashes will accept glass up to 6.76mm thick. We also have wrap around sashes that will accept 20mm IGU's. The heavy duty beaded sash will accept glass from 4mm to 20mm thick as shown below.
Series 456 Commercial Awning Window.External view.
* Subject to individual site conditions and wind loads. Contact AWS Technical Support for more information, Email [email protected]
** Over width awning sashes are available, contact local AWS sales office for details.
DATE: MAY 13REPLACES: JUNE 06SCALE: NOT TO SCALE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
2.429
WERs RATINGs
HOW TO sPECIFY
Specification Assistance
Need help specifying this product? Email [email protected] and our qualified technical advisors will assist you with product selection and specification for your project.
sYsTEM NAME
Elevate™ Aluminium Systems Series
456 Commercial Awning Window
FINIsH
Powder Coat
Anodised
COlOUR
Select from the AWS range of approved
powder coat or anodising colours
GlAss
Specify thickness ≤ 20mm
Specify thermal performance where
applicable (Uv & SHGC)
Specify acoustic performance where
applicable (RW)
DATE: MAY 13REPLACES: JUNE 06SCALE: NOT TO SCALE
sOUND REDUCTION
A number of glass combinations have been tested with this system to acheive sound reduction numbers listed below.
Glass Description Rating4mm Glass STC 30 dB
6.38mm Laminated glass Rw 34
10.38mm Laminated glass STC 36 dB
NOTE: The actual tests were carried out on a product very similar to this window (Series 514).
Double Glazed Window ID Glass Type Uw sHGCw Tvw Inf
AWS-060-01 6.38CPGy/8Ar/4 4.2 0.31 0.22 5
AWS-060-02 6.38CPGy/8/4 4.4 0.31 0.22 5
AWS-060-03 6.38CPClr/8Ar/4 4.2 0.42 0.47 5
AWS-060-04 6.38CPClr/8/4 4.4 0.43 0.47 5
AWS-060-05 4Sn/10Ar/4 4.3 0.37 0.39 5
AWS-060-06 4Sn/10/4 4.5 0.38 0.39 5
AWS-060-07 3SpGn/12/3 4.8 0.37 0.44 5
AWS-060-08 5/8Ar/5 4.7 0.5 0.51 5
AWS-060-09 5/08/2005 4.9 0.5 0.51 5
AWS-060-10 4/10/4ET 4.3 0.48 0.48 5
AWS-060-11 4/10Ar/4ET 4.2 0.49 0.48 5
AWS-060-12 5SpGn/8Ar/5ET 4.3 0.28 0.37 5
AWS-060-13 4Az/10/4ET 4.3 0.29 0.4 5
AWS-060-14 4/10/2004 4.8 0.52 0.51 5
AWS-060-15 3/12Ar/3ET 4.1 0.49 0.48 5
NOTEs1. Uw is the whole window U-value2. SHGCw is the whole window solar heat gain coefficient3. Tvw is the whole window visible (light) transmittance4. Maximum air infiltration is 5.0L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS 20475. Static performance (Uw SHGCw Tvw Tdw) calculated using Window 6.3 and Therm 6.3 software (LBNL), 1999-20106. Results disclosed at Australian Fenestration Rating Council (AFRC) regulations.7. Ratings for use with Section J of the Building Code of Australia - Class 2-9
For the latest WERs data for this system visit www.wers.net
DATE: MAY 13REPLACES: JUNE 06SCALE: NOT TO SCALE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
DEsIGN FEATUREs
The detail on this page shows the optional heavy duty beaded sash designed for exposed locations.
This heavy duty sash is also suitable for full height awning sashes.
As the sash is beaded it can be fitted with glass from 4mm to 20mm thick using the appropriate glazing bead.
DEsIGN FEATUREs
DATE: MAY 13REPLACES: JUNE 06SCALE: NOT TO SCALE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
2.431
Residential awning sashes inlaid directly into shopfront framing.
Dedicated head and sill to accept awning sashes with manual chain winders and standard 30mm or alternative 44mm nailing fin jambs. We also have a double glazed 44mm nailing fin frame for those projects with double glazed fixed highlights or lowlights.
Complies with AS2047, with a high water resistance of 450Pa. With a very low air infiltration that makes this product suitable for air-conditioned buildings.
Besides the standard manual chain winders the awning sashes can be fitted with concealed electric chain winders or cam handles.
Flyscreens can be fitted behind awning sashes with winders.
Wrap around light sashes will accept glass up to 6.76mm thick, we also have wrap around sashes that will accept 20mm IGU’s. The heavy duty beaded sash will accept glass from 4mm to 20mm thick.
Fixed lowlights can be glazed from the inside in elevated situations by reversing the removable glazing beads.
Fixed lights can be single or double glazed with glass up to 24mm thick.
Nailing fin frame makes the product suitable for cavity brick and brick veneer construction.
Dedicated 90° and 135° couplers.
The illustration right shows the standard light wrap around sash option and manual chain winder sill.
Nailing fin sub-sill standard on Series 456 windows as shown right.
DOUblE GlAZED sAsH AND FIXED lOWlIGHT
DATE: MAY 13REPLACES: JUNE 06SCALE: NOT TO SCALE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
24mm Double glazed fixed with 20mm double glazed sash.
We use a wider sash stop in the double glazed frame this allows us to run the double glazed jamb through sash and fixed area.
The reason for the double glazed jamb is to accept the 24mm IGU’s straight into lowlights and or highlights.
We have two double glazed sashes :* 16023 & 16024 wrap around sash will accept 20mm IGU’s.* 16025 & 16026 beaded sash will accept IGU’s up to 20mm thick
depending on the bead and roll-in wedge used.
The standard Series 456 sill with pocketed filler and transom adaptor.
450Pa water resistance.
The double glazed unit nests neatly into transom, jambs and sill, giving a clean professional finish.
Sub-sills are standard under Series 456 windows.This detail shows our nailing fin sub-sill, designed specifically for brick veneer and cavity brick wall
sAsH sTRENGTH
DATE: MAY 13REPLACES: JUNE 06SCALE: NOT TO SCALE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
2.433
s = Serviceability limit state (deflection = L/150).U = Ultimate strength limit state (factored yield strength = 104 MPa).
These tables have been calculated using nominal section properties.A typical assembly has been tested as per the requirements of AS2047,
Ultimate strength rating has been limited to 4500 Pa, 50% higher than the highest serviceability number nominated.
3000 Serviceability ratings were restricted by the maximum water resistance (450Pa) achieved on this product.
Blank Denotes rating under 500 Pa.
Wind Ratings (Pa) sash.
310
16012 16013
1602416014
16026
Window light sashes H.D. sashes H.D. sash
Height Width 16012 & 16013 16014 & 16024 16026type mm mm s U s U s U
A 1300 610 1597 2649 2617 4500 3000 4500
A 1300 710 1359 2159 2227 4236 3000 4500
A 1300 910 1057 1674 1732 3284 3000 4500
A 1300 1010 956 1512 1567 2965 3000 4500
A 1300 1210 812 1278 1330 2506 2638 4481
A 1400 610 1261 2169 2066 4254 3000 4500
A 1400 710 1072 1842 1756 3612 3000 4500
A 1400 910 831 1424 1362 2794 2701 4500
A 1400 1010 751 1284 1230 2519 2440 4500
A 1400 1210 634 1081 1039 2121 2062 3793
A 1500 610 1013 1874 1659 3675 3000 4500
A 1500 710 860 1589 1409 3117 2796 4500
A 1500 910 665 1227 1090 2406 2163 4303
A 1500 1010 600 1105 983 2167 1951 3875
A 1500 1210 505 928 828 1819 1643 3254
A 1600 610 826 1635 1353 3206 2685 4500
A 1600 710 701 1386 1148 2718 2278 4500
A 1600 910 541 1068 887 2095 1759 3746
A 1600 1010 799 1885 1585 3371
A 1600 1210 671 1579 1331 2823
A 1700 610 682 1439 1118 2822 2218 4500
A 1700 710 579 1219 948 2392 1881 4277
A 1700 910 731 1841 1450 3292
A 1700 1010 658 1655 1305 2959
A 1700 1210 551 1384 1094 2474
A 1800 610 570 1277 934 2504 1854 4477
A 1800 710 792 2121 1571 3792
A 1800 910 610 1631 1210 2916
A 1800 1010 548 1465 1088 2619
A 1800 1210 910 2187
A 1900 610 789 2236 1565 3999
A 1900 710 668 1893 1326 3386
A 1900 910 514 1454 1020 2601
A 1900 1010 917 2335
A 1900 1210 766 1947
A 2000 610 672 2009 1333 3593
A 2000 710 569 1701 1129 3042
A 2000 910 868 2335
A 2000 1010 780 2095
A 2000 1210 650 1745
A 2100 610 577 1815 1145 3247
A 2100 710 970 2747
A 2100 910 745 2108
A 2100 1010 669 1891
A 2100 1210 557 1573
HEAD AND sIll DETAIls WITH lIGHT sAsH
DATE: MAY 13REPLACES: JUNE 06SCALE: FULL SIZE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
310
Head
We have a dedicated head section to allow the installation of awning window sashes fitted with manual chain winders into Series 400 CentreGLAZE™ framing.
Built-in nailing fin on head, jambs and sub-sill make this window significantly more water proof and easier to install into brick veneer and cavity brick walls.
Co-extruded Santoprene bulb seal.
Light sashes will accept glass up to 6.76mm thick.Dedicated double glazed sashes and the beaded heavy duty sash will accept glass up to 20mm thick.
310
CAD file: DWG 456.AWN.1
sill
We have a dedicated sill section to allow the installation of awning window sashes with manual chain winders into Series 400 CentreGLAZE™ framing.
Polesium™ cover and base manual chain winder comes with key locking as standard. The main feature with this winder is the corrosion resistant base and stainless steel chain.
Both frame and sash reinforced at winder fixing positions.
Important Note:Sub-sill standard under Series 456 windows.
JAMb DETAIls WITH lIGHT sAsH
DATE: MAY 13REPLACES: JUNE 06SCALE: FULL SIZE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
2.435
We have dedicated sections to allow the installation of awning window sashes intoSeries 400 CentreGLAZE™ framing.
Alternative 44mm CentreGLAZE™ Nailing fin frame illustrated left. Jamb adaptor can be clipped to any of the centre pocket CentreGLAZE™ frames including corners.
Light wrap around sash illustrated.
CAD file: DWG 456.AWN.1
310
310
Standard 30mm CentreGLAZE™ Nailing fin frame illustrated left.
This jamb shows the height adjustable galvanised building-in lug. used on cavity brick installations.
Standard30mm jamb
Alternative44mm jamb
HEAD AND sIll DETAIls WITH HEAvY DUTY bEADED sAsH
DATE: MAY 13REPLACES: JUNE 06SCALE: FULL SIZE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
310
Head
We have a dedicated head section to allow the installation of awning window sashes fitted with manual chain winders into CentreGLAZE™ shopfront framing.
Built-in nailing fin on head, jambs and sub-sill make this window significantly more water proof and easier to install into brick veneer and cavity brick walls.
Co-extruded Santoprene bulb seal.
Heavy duty sash illustrated will accept glass up to 20mm thick.
Flyscreen location.
310
sillWe have a dedicated sill section to allow the installation of awning window sashes with manual chain winders into Series 400 CentreGLAZE™ framing.
Polesium™ manual chain winder comes with key locking as standard. The main feature with this winder is the corrosion resistant base and stainless steel chain.
Both frame and sash reinforced at winder fixing positions.
Important Note:Sub-si l l standard under Series 456 windows.
CAD file: DWG 456.AWN.1
JAMb DETAIls WITH HEAvY DUTY bEADED sAsH
DATE: MAY 13REPLACES: JUNE 06SCALE: FULL SIZE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
2.437
310
We have dedicated sections to allow the installation of awning window sashes into CentreGLAZE™ shopfront framing.
Alternative 44mm CentreGLAZE™ Nailing fin frame illustrated left. Jamb adaptor can be clipped to any of the centre pocket CentreGLAZE™ frames including corners.
Heavy duty beaded sash illustrated.
310
Standard 30mm CentreGLAZE™ Nailing fin frame illustrated left.
Standard30mm jamb
Alternative44mm jamb
CAD file: DWG 456.AWN.1
sUb sIll
DATE: MAY 13REPLACES: JUNE 06SCALE: FULL SIZE
CO
MM
ER
CIA
L S
ER
IES
© A
rchi
tect
ural
Win
dow
Sys
tem
s Pt
y Lt
d 1
996-
2013
Ser ies 456
COMMERCIAL AWNING WINDOW
Sub-sill caps sealed to nailing fin jamb on both edges and at the nailing fin location.
Sub-sill capped with custom moulded nylon stop ends.
Important Note:The nailing fin sub-sill is standard under Series 456 awning windows.
Nailing fin jamb will accept galvanised building-in lug, these are ideal for cavity brick wall installation.
Continuous run of caulking seals the sub-sill to sill.
Timber reveal
