SELSIL SEALANTS

Quality is our priority!

www.sel.com.tr

SEL Dış Ticaret ve Kimya San A.Ş. was established in 1991 by the share holders of Teknik Kauçuk San

A.Ş., one of the biggest companies in the Rubber Industry in Turkey. The goal by founding SEL was to

reach different kinds of business in the Construction Chemical Sector and it was achieved successfully.

Since its establishment, SEL has constantly grown, turning to be one of the biggest companies in Turkey

in the Adhesives & Sealants Sector. The structure capacity of SEL is very high. Its high-tech factory, es-

tablished in Istanbul, has an area of 34.000 m2 in where 13.000 m2 is used for its production activities.

SEL has a very wide range of products and it is one of the few and precious companies in Europe that

produces from package (HDPE Cartridges) to final products.

For almost 20 years SEL has been more than just supplier of products. Its clients can count with high

quality, variety, customized solutions and constant innovation and that is why the lemma of SEL has al-

ways been: ‘Quality is our priority!’

SEL’s Quality Management System was certificated by DQS according to DIN EN ISO 9001:2008.

www.sel.com.tr

CERTIF ICATE ISO 9001 :2008



www.sel.com.tr

CERTIF ICATE ISO 9001 :2008

www.sel.com.tr

I N D E X

POLYURETHANE FOAMS

SIL ICONE SEALANTS

ACRYLIC SEALANTS

ALL ADHESIVES

TUBE SERIES

SAUSAGE SERIES

APPLICATORS

PRIVATE LABEL

01

08

19

25

39

40

41

42

OTHERS CATEGORIES 38


PO

LY

UR

ET

HA

NE

FO

AM

S

www.sel.com.tr

Product Description: Selfix is a one-component, self-expanding, ready to use polyurethane foam.

Technical properties:Base : Polyurethane pre-polymerCuring system : Moisture cureSkin formation : Approximately 10 min.Specific gravity : 23 ± 3 kg/m3Ready-to-cut time : 15 - 20 min.Ready-to-bear time : 5 - 8 hoursCan temperature : min.5ºCTemperature resistance : -40ºC until +100ºC (cured)Tensile strength : 9 N/cm2Elongation : 25%Shear strenght : 5 N/cm2Compressive strength : 4 N/cm2Fire properties : B3 (DIN 4102)

Application Method: Shake the can approximately 30 - 35 times before use.

Caution: Keep out of reach of children. Use in a well ventilated area. Don’t smoke. Take the usual industrial hy-giene precautions. Wear gloves and safety goggles. Remove cured foam by mechanical mans only, never burn away.

Shelf life: 12 months.

SELF IX PU FOAM

Packing VolumeGun Grade 750 ml

Nozzle 750 ml

Properties:• Excellent adhesion on most materials (except PE/PP).• High thermal and acoustic isolation.• Very good filling capacity. • Excellent mounting ability.

Applications:• Assembling and sealing of window and doorframes.• Filling of cavities.• Sealing of all openings in roof constructions.• Creation of a soundproof screen. • Substrate: All substrates, except PE and PP.• State of surface: Clean, free of dust and grease.• Preparation: Moistening of the surfaces improves adhesion, curing and cellular structure.

01


PO

LY

UR

ET

HA

NE

FO

AM

S

www.sel.com.tr


Technical properties:Base : Polyurethane pre-polymerCuring system : Moisture cureSkin formation : Moisture cureSpecific gravity : 23 ± 3 kg/m3Ready-to-cut time : 15 - 20 min.Ready-to-bear time : 5 - 8 hoursCan temperature : min.5ºCTemperature resistance : -40ºC until +100ºC (cured)Tensile strength : 9 N/cm2Elongation : 25%Shear strength : 5 N/cm2Compressive strength : 4 N/cm2Fire properties : B3 (DIN 4102)



SELFOAM PU FOAM

Product Description: Selfoam is a one-component, self-expanding, ready to use polyurethane foam.



Nozzle 750 mlNozzle 500 mlNozzle 300 ml


Properties:• Excellent adhesion on most materials (except PE/PP).• High thermal and acoustic isolation.• Very good filling capacity. • Excellent mounting ability.

02

PO

LY

UR

ET

HA

NE

FO

AM

S

www.sel.com.tr


Product Description:Selfoam Pro Reusable is a one-component, self-expanding, ready to use polyurethane foam. Properties:• Excellent adhesion on most materials (except PE/PP).• High thermal and acoustic isolation.• Very good filling capacity. • Excellent mounting ability.• After use, seal off the nozzle with stopper so it can be used again for several weeks.

Technical properties:Base : Polyurethane pre-polymerCuring system : Moisture cureSkin formation : Approx. 10 min.Specific gravity : 23 ± 3 kg/m3Ready-to-cut time : 15 - 20 min.Ready-to-bear time : 5 - 8 hoursCan temperature : min. 5ºCTemperature resistance : -40ºC until +100ºC (cured)Tensile strength : 9 N/cm2Elongation : 25%Shear strength : 5 N/cm2Compressive strength : 4 N/cm2Fire properties : B3 (DIN 4102)





SELFOAM PRO REUSABLE

Packing Volume

Nozzle 750 ml

03

PO

LY

UR

ET

HA

NE

FO

AM

S

www.sel.com.tr


Product Description:Megafoam is a one-component, self-expanding, ready to use polyure-thane foam.

Properties:• Excellent adhesion on most materials (except PE/PP).• High thermal and acoustic isolation.• Very good filling capacity. • Excellent mounting ability.• Volume after cured 65 liters.


Applications:• Assembling and sealing of window and doorframes.• Filling of cavities.• Sealing of all openings in roof constructions.• Creation of a soundproof screen. • Substrate : All substrates except PE and PP.• State of surface: Clean, free of dust and grease.• Preparation: Moistening of the surfaces improves adhesion, curing and cellular structure.

Application method: Shake the can approximately 30 - 35 times before use.



MEGAFOAM PU FOAM


04

PO

LY

UR

ET

HA

NE

FO

AM

S

www.sel.com.tr


Product Description:Selfoam Plus Reusable is a one-component, self-expanding, ready to use polyurethane foam.

Properties:• Excellent adhesion on most materials (except PE/PP).• High thermal and acoustic isolation.• Very good filling capacity. • Excellent mounting ability.• After use, seal off the nozzle with stopper so it can be used again for several weeks.• Safety Valve.


Applications:• Assembling and sealing of window and doorframes.• Filling of cavities.• Sealing of all openings in roof constructions.• Creation of a soundproof screen. • Substrate : All substrates except PE and PP.• State of surface: Clean, free of dust and grease.• Preparation: Moistening of the surfaces improves adhesion, curing and cellular structure.



Caution: Keep out of reach of children. Use in a well ventilated area. Don’t smoke. Take the usual industrial hygiene precautions. Wear gloves and safety goggles. Remove cured foam by mechanical mans only, never burn away.

SELFOAM PLUS (SAFETY VALVE)

Packing VolumeNozzle 750 ml

05

PO

LY

UR

ET

HA

NE

FO

AM

S

www.sel.com.tr


Product Description:Selfoam All Weather is a one-component, self-expanding, ready to use polyurethane foam.

Properties:• Excellent adhesion on most materials (except PE/PP).• High thermal and acoustic isolation.• Very good filling capacity. • Excellent mounting ability.• -10 C/ +35 C lt hardens between 2 and 4 hours in wet conditions.

Technical properties:Base : Polyurethane pre-polymerCuring system : Moisture cureSkin formation : Approx. 10 min.Specific gravity : 23 ± 3 kg/m3Ready-to-cut time : 15 - 20 min.Ready-to-bear time : 5 - 8 hoursCan temperature : min.5ºCTemperature resistance : -40ºC until +100ºC (cured)Tensile strength : 9 N/cm2Elongation : 25%Shear strength : 5 N/cm2Compressive strength : 4 N/cm2Fire properties : B3 (DIN 4102)

Applications:• Assembling and sealing of window and doorframes.• Filling of cavities.• Sealing of all openings in roof constructions.• Creation of a soundproof screen .• Substrate : All substrates except PE and PP.• State of surface: Clean, free of dust and grease.• Preparation: Moistening of the surfaces improves adhesion, curing and cellular structure.

Caution: Keep out of reach of children. Use in a well ventilated area. Don’t smoke. Take the usual industrial hygiene precautions. Wear gloves and safety goggles. Remove cured foam by mechanical mans only, never burn away.


SELFOAM ALL WEATHER -10ºC /+35ºC


Nozzle 750 ml Application Method: Shake the can approximately 30 - 35 times before use.

06

PO

LY

UR

ET

HA

NE

FO

AM

S

www.sel.com.tr


SELFIX FOAM CLEANER

Product Description:Selfix foam cleaner contains MEK.

Properties:• If it is applied immediately after usage, more effective results can be achieved.• By pushing the foam remaining which is entirely hardened, it avoids the gun nozzle be stopped up.• It provides cleaning valves of cans.

Technical properties:Specific gravity : 0,8 g/cm3

Applications:• Dismantle the polyurethane foam tube from the gun;• Fix the Selfıx Foam Cleaner Spray to the gun;• Spray the foam remaining are melted by cleaner into the cup is resis-tant against Selfix Foam Cleaner Spray;• When the remaining flow stopped from the gun, the clearence is over;• Put it in a cool and air place after application;• Please do avoid the skin contact by using the gloves and the protective spectacles.

Caution: Selfix Foam Cleaner Spray tube is pressurized. Keep away from direct sun light. Keep away from over 50ºC. Keep the tubes in cool, dry and airy places. Do not spray it toward to the flame or incandescent subject. Keep it away from any kind of flame sources. Please keep away from children.


Packing VolumeAerosol Cans 500 ml

07

SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


Product Description:Selsil Multi Purpose is a one-component acetoxy based silicone sealant.

Properties:• Very easy application.• Permanent colors, UV resistant.• Stay permanently elastic after curing.• High and low temperature resistance.• No odor after curing.

Applications:• Standard and butt glazing.• General sealing and assembly.• Bathroom, kitchen and other sanitary applications.

Colors:Transparent, white, black, aluminium, bronze, red, bahama, brown, grey and oak.

Shelf life:12 months in unopened packing in a cool, dry, storage place at tempera-tures between +5ºC and +25ºC.

Caution:Keep out of reach of children. Avoid contact with skin. Use only in well ventilated areas. Irritating to eyes. Don’t use in aquariums.

SELSIL MULTI PURPOSE S IL ICONE

Specific gravity : 0.96 ± 0,03 g/cm3Application rate : 500 g/min. (3,2 mm orifice, 6,3 Bar)Tooling time : 12 min. (23ºC, 50% humidity)Tack free time : 25 min. (23ºC, 50% humidity)Hardness : 18 / Shore AElongation at break * : > 400%Tensile strength * : 1,3 MPaTemperature resistance : -40ºC / +100ºC

Technical properties:

Packing VolumeCartridges 310 ml

08

* All tests with elongation and tensile strenght are made under the conditions of ASTM DIN 53504.

SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


SELSIL A MULTI PURPOSE S IL ICONE

Product Description:Selsil A Multi Purpose Silicone is an one-component acetoxy based sili-cone sealant.


Applications:• Standard and butt glazing.• General sealing and assembly.• Bathroom, kitchen and other sanitary applications.

Colors:Transparent, white, black, aluminium, bronze, red, bahama, brown, grey and oak.




09

Technical properties:Specific gravity : 0.96 ± 0,03 g/cm3Application rate : 500 g/min. (3,2 mm orifice, 6,3 Bar)Tooling time : 12 min. (23ºC, 50% humidity)Tack free time : 25 min. (23ºC, 50% humidity)Hardness : 18 / Shore AElongation at break * : > 400%Tensile strength * : 1,3 MPaTemperature resistance : -40ºC / +100ºC


SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


Product Description:Selsil Neutral is a one-part easy, gunnable and alcoxy based silicone sealant.

Properties:• Very easy application.• Permanent colors, UV resistant.• Stay permanently elastic after curing.• Low odor is advantageous during applications and curing.• High and low temperature resistance.

Applications:• For glass or glazed surfaces.• Painted wood, aluminium and other metals.• Masonry, concrete, GRP, PVC and other plastics.

Colors:White, transparent, black and brown.

Shelf life:12 months in unopened packing in a cool, dry, storage place at temperatures between +5ºC and +25ºC.

Caution:Keep out of reach children. Avoid contact with skin. Use only in well venti-lated areas. Irritating to eyes. Don’t use in aquariums.

SELSIL NEUTRAL


10

Technical properties:Specific gravity : 1,01 ± 0,03 g/cm3Application rate : 350 g/min. (6 mm orifice, 2 Bar)Tooling time : 8 min. (23ºC, 50% humidity)Tack free time : 15 min. (23ºC, 50% humidity)Application temperature : +5ºC / +40ºCHardness : 25 / Shore AElongation at break * : 400%Tensile strength * : 1,2 MPaTemperature resistance : -20ºC / +100ºC


SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


Product Description:Selsil HT 315 C High Temperature is a one-part acetoxy high temperature resistant silicone sealant which cures with atmospheric moisture to form a rubberlike seal.

Properties:• Very easy application.• High temperature resistance. (continuously 270ºC, intervals 315ºC).• Stay permanently elastic after curing.• Cures with atmospheric moisture.• Resistance to water, ozone, UV and chemicals.

Applications:• Between metals pieces.• In car; gasket in differential gear cover, motor cover and carburetor cover.• Producing of electrical house instruments.• Gaskets in pumps and motors.• Sealing in heating systems.• Sealing around thermostats.

Color: Red.


Caution: Keep out of reach children. Avoid contact with skin. Use only in well ventilated areas.Irritating to eyes. Don’t use in aquariums.

SELSIL HT 315ºC H IGH TEMPERATURE


11

Technical properties:Specific gravity : 1,03 ± 0,03 g/cm3Application rate : 230 g/min. (6 mm orifice, 2 Bar)Tack free time : 15 min. (23ºC, 50% humidity)Application temperature : +5º C / +40ºCHardness : 25 / Shore AElongation at break *(ISO8339) : 130%Tensile at break *(ISO 8339) : 0,58 MPa Temperature resistance : -40ºC / +270ºC


SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


Product Description:Selsil Pro is a one-component acetoxy based silicone sealant.

Properties:• 100% silicone polymer.• High strength.• Resistant to ozone,ultra-violet radiation .• Stay permanently elastic after curing.• High and low temperature resistance.• Solvent-free.

Applications:• Suitable for use across a broad range of applications.• Good adhesion to a variety of non –porous substrates such as glazed ceramic tiles, aluminium and metal.

Colors:Transparent and white.


Caution: Keep out of reach of children. Avoid contact with skin. Use only in well ventilated areas. Irritating to eyes.

SELSIL PRO


12

Specific gravity : 1,03 ± 0,03 g/cm3 Application rate : 400 g/min. (3,2 mm orifice, 6,3 Bar)Tooling time : 14 min. (23ºC, 50% humidity)Tack free time : 20 min. (23ºC, 50% humidity)Application temperature : +5ºC / +40ºCHardness : 25 / Shore AElongation at break * : 480%Tensile strength * : 2,3 MPa Temperature resistance : -50ºC / +150ºC



SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


Product Description:Selsil Aquarium is a one-component acetoxy based silicone sealant.

SELSIL AQUARIUM

Properties:• 100% silicone polymer.• High strength.• Resistant to ozone,ultra-violet radiation.• Stay permanently elastic after curing.• High and low temperature resistance.• Solvent-free.

Applications:• Suitable for use across a broad range of applications.• Good adhesion to a variety of non-porous substrates such as glazed ceramic tiles, aluminium and metal.

Color: Transparent.


Caution:Keep out of reach of children. Avoid contact with skin. Use only in well ventilated areas. Irritating to eyes.


13

Specific gravity : 1,03 ± 0,03 g/cm3 Application rate : 250 g/min. (3,2 mm orifice, 6,3 Bar )Tooling time : 14 min. (23ºC, 50% humidity)Tack free time : 20 min. (23ºC, 50% humidity)Application temperature : +5ºC / +40ºCHardness : 18 / Shore AElongation at break * : > 450%Tensile strength * : 1,6 MPaTemperature resistance : -50ºC / +150ºC



SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


SELSIL SHOWER CABIN

Product Description:Selsil Shower Cabin is a one-component acetoxy based silicone sealant.

Properties:• 100% silicone polymer.• High strength.• Resistant to ozone,ultra-violet radiation.• Stay permanently elastic after curing.• High and low temperature resistance.• Solvent-free.

Applications:• Suitable for fitting shower cabin.• good adhesion to a variety of non-porous substrates such as glazed ceramic tiles, glass, aluminium and metal.

Color: Transparent and white.


Caution:Keep out of reach of children. Avoid contact with skin. Use only in well ventilated areas. Irritating to eyes.


14

Specific gravity : 1,03 ± 0,03 g/cm3 Application rate : 250 g/min. (3,2 mm orifice, 6,3 Bar )Tooling time : 14 min. (23ºC, 50% humidity)Tack free time : 20 min. (23ºC, 50% humidity)Application temperature : +5ºC / +40ºCHardness : 18 / Shore AElongation at break * : > 450%Tensile strength * : 1,6 MPaTemperature resistance : -50ºC / +150ºC



SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


SELSIL MIRROR

Product Description:Selsil Mirror is a one-part easy, gunable, sanitary neutral silicone sealant.

Properties:• Very easy application.• Permanent colors, UV resistant..• Stay permanently elastic after curing.• Low odor is advantageous during applications and curing.• High and low temperature resistance.

Applications:• Adhesion to most porous and non-porous substrates including masonry, brick, aluminium, metals, PVC, polyacrylate, polycarbonate, impregnated, varnished or painted wood, glass and glazed surfaces.

Color: White.


Caution:Keep out of reach children. Avoid contact with skin and eyes. Don’t breathe vapor. Use only in well ventilated areas. Don’t use in aquariums.


15

Technical properties:Specific gravity : 1,01 ± 0,03 g/cm3Application rate : 350 g/min. (6 mm orifice, 2 Bar)Tooling time : 8 min. (23ºC, 50% humidity)Tack free time : 15 min. (23ºC, 50% humidity)Application temperature : +5ºC / +40ºCHardness : 25 / Shore AElongation at break * : 400%Tensile strength * : 1,2 MPaTemperature resistance : -20ºC / +100ºC


SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


SELSIL NEUTRAL EXTERIOR S IL ICONE

16

Product Description:Selsil Exterior silicone is a one-part easy, gunnable, alcoxy sealant.

Properties:• Very easy application.• Low odor.• Resistant to ozone, ultra-violet radiation and temperature extreme.• Contains fungicide.• Low modulus, high elasticity.• Good unprimed adhesion to a variety of substrates.• Non-corrosive to metals.

Applications:• For glazing and the weather sealing of all types of windows (PVC, wood, aluminium). • Adhesion to most porous and non-porous substrates including masonry, brick, aluminium, metals, PVC, polyacrylate, polycarbonate, impregnated, varnished or painted wood, glass and glazed surfaces.

Colors:White, transparent and black.


Caution:Keep out of reach children. Avoid contact with skin and eyes. Don’t breathe vapor. Use only in well ventilated areas. Don’t use in aquariums.


Technical properties:Specific gravity : 1,01 ± 0,03 g/cm3Extrusion : 180 g/min.Skin-over time : 15 min. (23ºC, 50% humidity)Tack free time : 50 min. (23ºC, 50% humidity)Application temperature : +5ºC / +40ºCHardness : 10 / Shore AElongation at break * : 500%Tensile stength * : 1,0 MPa


SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


SELSIL ECO

17

Product Description:Selsil Eco is a one-component acetoxy based silicone sealant.


Applications:• Standard glazing.• General bonding applications.• Bathroom, kitchen and other sanitary applications.

Colors:Transparent and white.



Packing WeightCartridges 280 gr

Technical properties:Specific gravity : 0.96 ± 0,03 g/cm3Application rate : 500 g/min. (3,2 mm orifice, 6,3 Bar)Tack free time : 25 min. (23ºC, 50% humidity)Application temperature : +5ºC / +40ºCHardness : 18 / Shore A Elongation at break * : > 400%Tensile strength * : 1,3 MPaTemperature resistance : -40ºC / +100ºC


SIL

ICO

NE

SE

AL

AN

TS

www.sel.com.tr


Product Description:Selsil Hybrid Sealant is a one-component hybrid based sealant.

Properties:• Very easy application.• Environment friendly.• Contains no solvent and isocyanate.• No sag-exceptional thioxotropy.• Water proof.• Antibacterial.• No bubble formation• Excellent elongation and high adhesion properties.• Very low shrinkage.

Applications:• All construction area.• Sealing wood and metal construction.• Joint in prefabricate construction element. • High adhesion properties for sheet, metal, aluminium, painted alumini-um, glass and pvc surfaces. • Joints in car body and automobile manufacture.

Color: White.

Shelf life: 9 months in unopened packing in a cool, dry, storage place at temperatures between +5ºC and +25ºC.

Caution:Keep out of reach children. Avoid contact with skin.


SELSIL HYBRID SEALANT

18

Specific gravity : 1,40 ± 0,03 g/cm3Tack free time : 35 min. (23ºC, 50% humidity)Hardness : 45 ± 5 / Shore AElongation at break * : > 100%Tensile stength * : 2,10 MPa Application Temperature : +5ºC - +35ºC



AC

RY

LIC

SE

AL

AN

TS

www.sel.com.tr


Product Description:Selsil Acrylic is a one-part acrylic sealant.

Properties:• Very easy application.• Form permanently water repellent layer after curing.• Resistant to air conditions, stay elastic a long time after curing.• Paintable, contains no oil and does not effect on surface which is used acrylic sealant.

Applications:• Expanding fuga between prefabricate construction element.• Assembly wood, PVC, iron and aluminium joinery.• Joints in stone, wood, concrete, plaster and brick works etc.• Sealing of window and door frame to masonry.

Colors:White, black, grey, brown, golden oak, champagne, dark grey, cream, pear, beech, dark walnut, birch, RAL 1013 and light oak.

Shelf life: 12 months in unopened packing in a cool, dry, storage place at temperatures between +5ºC and +25ºC.

Caution:Keep out of freezing. Keep out of reach of children.

Specific gravity : 1,64 ± 0,03 g/cm3Tack free time : 15 - 60 min. (23ºC, 50% humidity)Completely dry time : 24 hour (23ºC, 50% humidity)Ph : 7,5 - 9Volume shrinkage : 29%Weight loss : 18%

Elongation * : > 100%Modulus 100 % elongation : ≥ 0,20 MpaMax. tensile strength * : ≥ 0,30 MpaTensile strength : ≥ 0,10 Mpa


* All tests with elongation and tensile strength are made under the conditions of ASTM D 412 C.

SELSIL ACRYLIC


19

AC

RY

LIC

SE

AL

AN

TS

www.sel.com.tr


SELSIL S IL ICONIZED

Product Description:Selsil siliconized acrylic sealant is a one-part acrylic sealant.

Properties:• Very easy application.• Forms a permanent and water repellent layer after curing.• Resistant to air conditions, stay elastic a long time after curing.• Paintable, contains no oil and does not effect on surface which is used acrylic sealant.


Colors:White, black, golden oak, grey, dark brown and bronze.

Shelf life: 12 months in unopened packing in a cool, dry, storage place at tempera-tures between +5ºC and +25ºC.


Specific gravity : 1.60 ± 0,03 g/cm3Tack free time : 15 - 45 min. (23ºC, 50% humidity)Completely dry time : 24 hour (23ºC, 50% humidity)Ph : 7,5 - 9Volume shrinkage : 31%Weight loss : 20%





20

AC

RY

LIC

SE

AL

AN

TS

www.sel.com.tr


SELSIL WATER RESISTANT ACRYLIC

Product Description:Selsil Pro Exterior acrylic sealant is a one-part acrylic sealant.

Properties:• Very easy application.• Forms a water tight plastic elastic sealant after curing.• Resistant to rain.• Excellent adhesion to damp and absorbent substrates.• Frost resistant during transport down to -5ºC.• Solvent free.• UV resistant.

Applications:• For sealing cracks, chinks, seams and connection joints that have a maximum 7,5% joint movement.• Assembly wood, PVC and aluminium joinery.• Sealing of window and door frame to masonry.• Not suitable for joints exposed to continuous water immersion or joints which are totally closed.

Colors: White.




Specific gravity : 1,55 ± 0,03 g/cm3Tack free time : 10 - 20 min. (23ºC, 50% humidity)Completely dry time : 24 hour (23ºC, 50% humidity)Ph : 8 - 9Volume shrinkage : 31%Weight loss : 20%




21

AC

RY

LIC

SE

AL

AN

TS

www.sel.com.tr


SELSIL ECO ACRYLIC

22

Product Description:Selsil Eco Acrylic is a one-part acrylic sealant.



Colors:White, grey, brown, cedar and black.



Packing WeightCartridges 510 gr

Technical properties:Specific gravity : 1,65 ± 0,03 g/cm3Tack free time : 15 - 60 min. (23ºC, 50% humidity)Completely dry time : 24 hour (23ºC, 50% humidity)Ph : 7,5 - 9Elongation * : > 100%Modulus 100 % elongation : ≥ 0,20 MpaMax. tensile strength * : ≥ 0,30 MpaTensile strength : ≥ 0,10 Mpa


AC

RY

LIC

SE

AL

AN

TS

www.sel.com.tr


SELSIL ACRYLIC STRUCTURE

23

Product Description:Selsil Acrylic Structure is a one-part acrylic sealant.


Applications:• For sealing joints, seams and splits in door and window frames, win-dow stile, prefab elements, stairs, skirting boards, corrugated sheeting, chimneys, ducts and guttering. Also for sealing cracks in walls. Adheres to brick , concerete, plasterwork, wood, glass, ceramic tiles, metals and rigid PVC.

Color: White.




Technical properties:Specific gravity : 1,72 ± 0,03 g/cm3Tack free time : 30 - 60min. (23ºC, 50% humidity)Completely dry time : 24 hour (23ºC, 50% humidity)Ph : 7,5 - 9Elongation * : > 200%Modulus 100 % elongation : ≥ 0,25 MpaMax. tensile strength * : ≥ 0,30 MpaTensile strength : ≥ 0,10 Mpa


AC

RY

LIC

SE

AL

AN

TS

www.sel.com.tr


SELSIL WOOD SEALANT

Product Description:Selsil Wood Sealant is a one-part acrylic sealant.

Properties:• Very easy application.• Form permanently water repellent layer after curing.• Resistant to air conditions, stay elastic a long time after curing.• Paintable, no contains oil and does not effect on surface which is used acrylic sealant.

Applications:• Expanding fuga between prefabricate construction element.• Assembly wood, PVC, iron and aluminium joinery.• Joints in stone, wood, concerete, plaster and brick works etc.• Sealing of window and door frame to masonry.

Colors:White, black, grey, light and dark brown, cherry, yellow sand, cream, beige, golden oak, cedar, redwood, mocha, bronze, fawn, merbau, light oak, ma-ple, medium oak, dark walnut, beech, teak and ivory.




Technical properties:Specific gravity : 1,62 ± 0,03 g/cm3Tack free time : 15 - 45min. ( 23ºC, 50% humidity)Completely dry time : 24 hour ( 23ºC, 50% humidity)Ph : 7,5 - 9Volume shrinkage : 32%Weight loss : 20%Elongation * : > 150%Modulus 100 % elongation : ≥ 0,40 MpaMax. tensile strength * : ≥ 0,50 MpaTensile strength : ≥ 0,15 Mpa


24

WA

TE

R B

AS

ED

AD

HE

SIV

ES

www.sel.com.tr


SELSIL L IQUID NAIL

Product Description:Selsil Liquid Nail is a one-part acrylic adhesive.

Properties:• Very easy application.• Form permanently water repellent layer after curing.• Paintable.• Solvent free adhesive which adheres to all common building surfaces.

Technical properties:Specific gravity : 1,62 ± 0,03 g/cm3Tack free time : 30 - 60 min. (23ºC, 50% humidity)Completely dry time : 24 hour (23ºC, 50% humidity)Ph : 7,5 - 9

Applications:• To fix skirting boards in both wood and PVC, thresholds, panels, ce-ramic tiles and ornamental framework on to various substrates such as masonry, concrete, plaster board and wood. Also suitable for the adhesion of polystyrene foam and polystyrene tiles.

Colors:White and beige.




25

WA

TE

R B

AS

ED

AD

HE

SIV

ES

www.sel.com.tr


SELFIX LAMINATED PARQUET ADHESIVE

Product Description:Selfix Laminated Parquet is a polyvinyl-based solvent free adhesive.

Properties:• Very easy application.• Ready-made adhesive for use.• Strong adherence capacity.• Waterproof.• Alter the natural color of wood.

Technical properties:Specific gravity : 1,08±0,03 g/cm3Viscosity : 20.000 ± 5.000 cpsCompletely dry time : 12 - 18hTotal solids : 45 ± 1%Color : White (alter the natural color of wood)Min. application temperature : +5ºC

Applications:• Parquet.• Floor covering. • Wooden furniture.• Laminates.• Paper and cardboard.

Colors:White (Selfix alter the natural color of wood).

Shelf life:12 months in unopened pack-ing in a cool, dry, storage place at temperatures between +5ºC and +25ºC.


Packing WeightBottles 500 gr

26

PO

LY

UR

ET

HA

NE

BA

SE

D A

DH

ES

IVE

S

www.sel.com.tr


SELSIL PU SEALANT

Product Description:Selsil Pu Sealant is a one-part polyurethane gun grade dual purpose ad-hesive and sealing compound with permanent elasticity. Once extruded, it cures by reaction to the atmospheric moisture to form a high performance and fast curing adhesive sealant.

Properties:• Fast cure.• Over-paintable.• Stable, non-shrinking.• Good weathering resistance.• Good color stability.• Can be easily smoothed and leveled out.• Extremely versatile product with a good adhesion a many surfaces.• Low odor.

Applications:• Selflex polyurethane mastic is a powerful and versatile adhesive / seal-ant for all jobs involving & bonding (for a wide variety of materials includ-ing metals, enameled substrates, wood, GRP and many plastics) with fast over-painting requirements in the vehicle construction and repair indus-tries. Specific for automotive assembly and repair, light / heavy commer-cial vehicle construction and repair, caravans and motor-homes, bus and truck industries, general fabrication and assembly.

Colors:White, grey and black.

Caution:Keep out of reach of children. Use in a well ventilated area. Keep away from heat sources.



27

Base : Polyurethane Curing system : Moisture cureTack free time at 23ºC and 50% r.h. : 30 - 60 minutesSpecific gravity : 1,26 ± 0,03 gr/cm3Curing at 23ºC and 50%r.h : 4 mm/24h.Hardness Shore A (ISO 868) : 35 - 40Elongation at break * (ISO 8339) : > 200%

Elastic modulus at 100% (ISO 8339) : > 0,6 N/mm²

Tensile strength * (ISO 8339) : > 0,75 N/mm2Elastic recovery : 85%Admissible joint movement : 12,5% total movement capacityApplication temperature : +5ºC to +35ºCTemperature resistance : -40ºC / +80ºC


* All tests with elongation and tensile strength are made under the conditions of ASTM DIN 53504.

PO

LY

UR

ET

HA

NE

BA

SE

D A

DH

ES

IVE

S

www.sel.com.tr


SELSIL CONSTRUCTION MONTAGE ADHESIVE

Product Description:Selsil Construction Montage Adhesive is a ready-to-use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier.

Properties:• Solvent based formula-quick drying/high early bond strength.• Excellent adhesion/bond strength-adheres to most common surfaces.• Exceptional early grab properties - usable in both vertical and horizontal positions.• High solids formulations - excellent gap filling properties without shrink-age.• Suitable for use where both surfaces are non-porous.• Excellent external weathering properties - suitable for exterior use.

Specific gravity : 1,28 ± 0,03 g/cm3Solids : 83 ± 2 %Final cure : 24 hours depending on substratesDurability : Up to 15 years when used as recommended

Application temp : +5ºC to 40ºCTemp. Resistance : -20ºC to +50ºCMoisture res. : ExcellentChemical resistance : Excellent to acids/alkali. Poor to solvents


Color: Beige.

Applications:• Bonding dado rails, architrave’s and skirting.• Fixing parquet and cork flooring.• Fixing wall cladding direct to internal wall surfaces or timber battens.• Fixing battens directly onto walls without fastening.• Bonding carpet gripper systems to most floors without the need for nail or tacks.• Bonding stair nosing to concrete or wooden stairs.• Fixing polyester, wood, PVC or metal thresholds.• Fixing nameplates, plastics boxes, decorative frames, wall sockets and junction boxes to most surfaces.• Securing aluminium or other skin panels to the framework or portable industrial building and caravans.

Caution:Keep out of reach of children. Highly flammable . Keep away from sources of ignition. No smoking.

Packing VolumeCartrigdes 300 ml

Shelf life:12 months from date of manufacture in unopened containers. Storage in original unopened containers between +5ºC and +20ºC. Do not store above 30ºC. Store as flammable goods.

28

PO

LY

UR

ET

HA

NE

BA

SE

D A

DH

ES

IVE

S

www.sel.com.tr


Product Description:Selfix Pu Marine Grade Adhesive is a one-component polyurethane based wood adhesive, which cures with moisture of air and has excellent resis-tance abilities to impact of water.

Properties:• Professional quality.• Easy application.• Short drying time with gap filling ability by swelling.• High adhesiveness capacity.• Water resistant.• Applicable to wet, wood made surfaces.

Base : PolyurethaneAppearance : LiquidCuring : Moisture of airColor : Natural wood (after drying) Specific gravity : 1,12±0,03 g/cm3Viscosity : 5000-6000 cps (5/20)Drying time : 120 min. (depends on environmental moisture

and temperature)Drying time by gaining : 10-12 h.( depends on environmental full adhe-

sion moisture and temperature)Isocynate content : 18,8%


Applications:• By adhesion of all kind of hard wood made materials.• By combining of all wood made materials.• By installing of MDF, slab surfaces, formica and door frames.• By construction of wood made ships and yachts.• Furniture industry.

Colors: Light brown.

Shelf life:9 months in unopened packing in a cool, dry, storage place at tem-peratures between +15ºC and +25ºC.

Caution:Keep out of reach of children. Avoid contact with skin and eyes. Use only in well ventilated areas and avoid breathing the vapor. Do not smoke near-by.

SELFIX PU MARINE GRADE ADHESIVE

Packing WeightBottles 300 gr

500 gr700 gr

29

PO

LY

UR

ET

HA

NE

BA

SE

D A

DH

ES

IVE

S

www.sel.com.tr


SELFIX MARBLE & STONE ADHESIVE

Product Description: Selfix Marble & Stone Adhesive is an unsaurated polyester resin based two component adhesive which must be cured a hardener.

Properties:• Material is easily applicable.• Material color remains constant.• Material does not diverge, crack, soften and bend between tempera-tures of –20ºC until +100ºC. • Material does make any scent.• Material is resistant to solvents, alkalics and acid solutions.

Technical properties:Specific gravity : 1,83 ± 0,03 gr/cm3Tooling time : 3 - 5 min. (with 1 - 3% hardener)Curing time : 6 - 9 min. (with 1 - 3% hardener)Flashing point : 39,2ºCHardness : 95 ± 5 Shore ATensile strength : 500 kg/cm2Traction modulus : 30.000 kg/cm2Resistance to flexion and traction : 2%Resistance to flexion : 600 kg/cm2Elastically flexion modulus : 27.000 kg/cm2

Applications:• By adhesion of marble, stone, ce-ramic, wall tilings, polishing stones, concrete and wood based materials.

Colors:Cream, white and champaigne.


Caution:Keep out of reach of children. Avoid contact with skin and eyes. Use in well ventilated areas and avoid breathing the vapor. Do not smoke nearby.

Packing Weight + HardenerCans 250 gr 7 gr

700 gr 21 gr1000 gr 30 gr1200 gr 35 gr

30

OT

HE

R A

DH

ES

IVE

S

www.sel.com.tr


SELFIX P-12 HARD PVC ADHESIVE

Product Description:Selfix P-12 Hard PVC Adhesive is a stabilized-syn-thetic resin and volatile solvent based one-component PVC adhesive.

Properties:• Easy application. • Must be mixtured before usage. • Completely dry time 10 minutes (Environmental Temperature 23ºC).• Pipes must not be removed before the dry time process is completed. • For the pipes to become usable wait for 8 hours, for pressure experiments wait for 24 hours.

Specific gravity : 0,95 - 1,00 gr/cm3Completely dry time : 10 min. (Environmental

Temperature 23ºC)Time must be passed for the material to become usable

8 hours

Viscosity : 3000 ± 400 cpsSolid material : 34 ± 2 %

Technical properties: Applications:• Drinking water, gas and agricultural watering pipe, from PVC manufactured pipes like heating pipes.• Combination points of pressured and unpressured pipes.

Color: Transparent.

Shelf life:12 months in unopened packing.

Caution:Keep out of reach of children. Avoid from contact with skin. Use in a well ventilated area. Avoid from eye contact. Do not breathe its vapor. Do not smoke cigarette. Keep away from heat sources. Burning and skin irritating.

Packing WeightBlister 50 gr

31

OT

HE

R A

DH

ES

IVE

S

www.sel.com.tr


SELFIX 2C PRO RAPID ADHESIVE

ACTIVATOR SPRAY

Product Description: Selfix 2C Pro Rapid Adhesive is a cyanoacrylate-activator.

Properties:• Increases the rate of cure of cyanoacrylate adhesives (super glues).• Improves bonding to difficult surfaces such as acidic materials such as woods.• Prevents penetration of adhesive into porous materials.• For use with cyanoacrylate adhesives.• Speeds strenght development to permit immediate use of the part.

Form : Colorless liquid in aerosolColor : Clear to slight yellowPh : n/eOdor : Solvent likeFlash Point : < 5ºC (closed cup)Boiling Point : 90 - 104ºCExplosive Properties : 0,9% let 8,0% uelFlammability : HIGHLY FLAMMABLEOxidation Properties : n/eSolubility : Immiscible in waterAuto flammability : n/eVapor Density : 9,6 kpa at 20ºC


Applications:Remove oil and grease contamination. Remove any old adhesive before applying. For difficult surfaces apply the activator first. Ultimate speed de-pends on adhesive type and viscosity.

Shelf life:Store in a closed upright container between 3ºC - 20ºC. Minimum shelf life 12 months.

Caution:Keep away from children. Do not store near of heat or in direct sunlight.

Color: Transparent.

Packing ActivatorKit 200 ml

400 ml

32

OT

HE

R A

DH

ES

IVE

S

www.sel.com.tr


SELFIX 2C PRO RAPID ADHESIVE

CYNOACRYLATE ADHESIVE

Product Description:Selfix 2C Professional Rapid Adhesive Cyanoacrylate Ester is a cyanoacrylate-adhesive.

Adhesive’s Performance:

Polymer Properties:

Form : ClearBoiling point : c.130ºC

Refraction data : 1,45Tack free time : 24 hour

Applications:• In Profile corner consist of MDF.• In cover of cupboard consist of laminate.• In works wood adhesive.

Application Method:Surfaces must be dry and clean. Apply the SELFIX 2C instant glue to the surface like a points. Apply the ac-tivator the other surface. Bond the items. Apply press for 15 - 20 seconds. Wait for drying adhesive 10 sec-onds.

Caution:Keep away from children. Keep in a cool, well venti-lated area away from heat, sparks and open flame.

Color : ClearBase substance : Ethyl - 2 - cyanoacrylateDensity : 1,05 gr/cm³Viscosity : 1500-1800 cPs (25ºC spindle

4,20 rpm)Resistance of heat : > 81ºC

Chemical Properties:

Drying Rate:

Balsa / Balsa : < 10 sNeoprene / Neoprene : < 7 s

EPDM / EPDM : < 7 sNitrile / Nitrile : 5 sMDF / MDF : 45 - 75 sMDF / MDF with accelerator : 10 - 15 sWood / Wood : 10 - 20 sPolycarbonate / Polycarbonate : 10 - 40 s

Resistance of Tension:

Wood Work : < 10 sMDF Work : < 7 s

Nit Rile Rubber : < 7 sPolycarbonate : 5 sWood : 45 - 75 s

Resistance of Flexion:

Wood and MDF : > 18 N/mm²Neoprene Rubber : > 5 N/mm²

Nit Rile Rubber : > 5 N/mm²EPDM Rubber : > 2, 5 N/mm²

33

OT

HE

R A

DH

ES

IVE

S

www.sel.com.tr


CHEMICAL ANCHOR EPOXY BASED

Product Description:Chemical Anchor Epoxy Based is a two-components, constituted resin and hardener, epoxy acrylate based chemical anchor system.

Properties:• Fast curing. • Thioxotropic, do be away to make flow.• Material is easily applicable with special gun. • Material color remains constant.


Shelf life:12 months in unopened packing. Close and direct sunlight for place storage.

Applications:• Product is used in shoot planting works for concrete and rock walls. • High load exposed to for anchorage and montage applications.

Apply :• Remove the cover of the cartridge. Place the special mixer on the tip of the cartridge. Don’t use without mixer. • Place the product in special cartridge gun. • Make a hole appropriate to the diameter and depth of the anchor by using a driller. • Purify the hole from dust and dirt by using a brush or air pomp. • Grease and dust don’t exist sure of in hole after place anchor. • Squeeze the product until it becomes grey (about 10cm-15cm) and don’t use this part. • The product about fifty-fifty filled in hole with special gun. Anchorage material to turn round slowly place. Product’s curing time must complete for service to open.

34

Caution:Keep out of reach of children. Avoid contact with skin and use in a well ventilated areas and avoid breathing the vapor. Don’t smoke nearby. Use protective clothes such us glove and glasses during application. In case of contact with skin wash immediately with water. For more information look at material safety data sheet.

OT

HE

R A

DH

ES

IVE

S

www.sel.com.tr


CHEMICAL ANCHOR EPOXY BASED

Chemical Resistance’s Table:Substance ResistanceDiesel oil It can exposure to long timeAcetic acid (5%) It can exposure to intermittentSulphuric acid (25%) Not recommended / It can exposure to very short time Salt water It can exposure to long time

Caustic soda (10%) It can exposure to long timeMethanol Not recommended

Technical properties:Mixture Ratio (Volume) : COMP. A: 90%Mixture Ratio (Volume) : COMP. B: 10%Specific gravity : 1,62 ± 0,03 kg/LComplete curing : 7 days 20°CService Temperature : -30°C / +100°CApplication Temperature : +5°C / +35°C

Curing Time :TºC Use Time Curing Time5ºC 25 min 2 - 3 Hour20ºC 6 min 1 Hour30ºC 4 min 30 min35ºC 2 min 25 min

Tensile Load For Concrete :Spring Diameter (mm) 8 10 12Min. perforation Diameter (mm) 10 12 14Hole Depth (mm) 80 100 120

Min. Tensile Load (kN) 7 11 16

(Values for C35 Ribbed Iron)

35

OT

HE

R A

DH

ES

IVE

S

www.sel.com.tr


CHEMICAL ANCHOR POLYSTER BASED

Product Description:Chemical Anchor Polyester Based is a two-components, constituted resin and hardener, polyester based chemical anchor system.

Properties:• Fast curing. • Thioxotropic, do be away to make flow. • Material is easily applicable with special gun. • Material color remains constant.

Shelf life:12 months in unopened packing. Close and direct sunlight for place storage.


Applications:• Easy and medium load exposed to for anchorage and montage applica-tions. • Brick, concrete and briquette walls fixed injection apparatus.

Apply :• Remove the cover of the cartridge. Place the special mixer on the tip of the cartridge. Don’t use without mixer. • Place the product in special cartridge gun. • Make a hole appropriate to the diameter and depth of the anchor by using a driller. • Purify the hole from dust and dirt by using a brush or air pomp. • Grease and dust don’t exist sure of in hole after place anchor. • Squeeze the product until it becomes black (about 10cm - 15cm) and don’t use this part. • The product about fifty-fifty filled in hole with special gun. Anchorage material to turn round slowly place. Product’s curing time must complete for service to open.

36

Caution:Keep out of reach of children. Avoid contact with skin and use in well ven-tilated areas and avoid breathing the vapor. Don’t smoke nearby. Use pro-tective clothes such us glove and glasses during application. In case of contact with skin wash immediately with water. For more information look at material safety data sheet .

OT

HE

R A

DH

ES

IVE

S

www.sel.com.tr


CHEMICAL ANCHOR POLYSTER BASED

Chemical Resistance’s Table:Substance ResistanceDiesel oil It can exposure to long timeAcetic acid (5%) It can exposure to intermittentSulphuric acid (25%) Not recommended / It can exposure to very short time Salt water It can exposure to long time

Caustic soda (10%) Not recommendedMethanol Not recommended

Technical properties:Mixture Ratio (Volume) : COMP. A: 90%Mixture Ratio (Volume) : COMP. B: 10%Specific gravity : 1,66 ± 0,03 kg/LComplete curing : 7 day 20°CService Temperature : -30°C / +100°CApplication Temperature : +5°C / +35°C

Tensile Load For Concrete :Spring Diameter (mm) 8 10 12Min. perforation Diameter (mm) 10 12 14Hole Depth (mm) 80 100 120

Min. Tensile Load (kN) 7 11 16

(Values for C35 Ribbed Iron)

Curing Time :TºC Use Time Curing Time5ºC 25 min 2 - 3 Hour20ºC 6 min 1 Hour30ºC 4 min 20 min35ºC 2 min 15 min

37

OT

HE

RS

CA

TE

GO

RIE

S

www.sel.com.tr

Product Description: Selsil HD 40 is a non-siliconized, lubricant effective, rust remover, protec-tive spray contains MoS2.

Technical properties:Appearance : Clear, slightly turbid liquid.Odor : Mild odor.Specific gravity : 0,80 - 0,82 gr/cm3

Caution: Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50ºC. Do not try to stick even a blank box. Keep away from ignition sources and naked flames. Keep out of children.


HD 40 RUST REMOVER

Packing VolumeAerosol 200 mlAerosol 400 ml

Properties:• Very easy application.• Excellent penetrating capability. • Loosens rusted parts and form a protective layer between metal sur-faces. • Diminishes friction.• Removes water and protects against moisture.• Protects metal parts and surfaces from corrosion.

Applications:• Selsil HD 40 provides an oily surface, stops squeaks and prevents cor-rosion in vehicles, household appliances, hinges, springs.• It creates a protective film layer in rusty areas which are corroded, avoids the oxidation in rusted bolts and nuts • It helps removing the moisture from the metal surfaces, electricity switches and car ignitions. • Shake the can well before use. Spray the Selsil HD-40 on the applica-tion surface.

38


TU

BE

SE

RIE

S

www.sel.com.tr


SELSIL TUBES

Selsil RTV Auto Gasket


Selsil Acrylic Sealant


Selsil Silicone Sealant


Colors: Red, blue and black.

Color: White.

Colors: Clear, white and black.

39

SA

US

AG

E S

ER

IES

www.sel.com.tr


SELSIL SAUSAGE SERIES

Selsil Silicone Sealant

Selsil Neutral Silicone Sealant

Selsil Super Acrylic Sealant

Selsil Siliconized Sealant

Selsil Super Siliconized Sealant

Selsil Pro Acrylic Sealant

Selsil Polyurethane Sealant

Selsil IGS (Insulating Glass Sealant)

Packing VolumeSausage 400 ml

600 ml

40


AP

PL

ICA

TIO

N E

QU

IPM

EN

TS

www.sel.com.tr

APPLICATORS

Silicone and Acrylic Mastic Guns

Foam Gun

41


PR

IVA

TE

LA

BE

L

www.sel.com.tr

PRODUCTS’ PACKAGING

All the products on this Catalog are available for Private Label Production.

HPDA Cartridges & Bottles

Foam Cans

Foam Plastic Caps

Plastic Buckets

Plastic Nozzles

42

Documents

SELSIL SEALANTS