Self-inflating Foam Mattress

USER MANUALPLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE USE.

2Adventure Kings Self-inflating Foam Mattress

Warning & Safety Information• Keep the mattress well away from naked flames and sharp objects.

• DO NOT jump onto the mattress, this may damage it and void warranty.

• Only use the mattress for its intended purpose, which is to relax or lay on it.

• Setup the mattress on a flat surface.

• Mattress is not suitable for use in water.

• DO NOT bend or twist the mattress in any way, other than folding it with the screw caps open.

• DO NOT jam anything inside the air caps.

Specifications

Dimensions 200cm (long) x 180cm (wide) x 14cm (thick)

Weight 13.3kg

Base PVC

Upper Soft flocked top

Care Instructions

Washing & Storing Instructions

• Sponge lightly with lukewarm water

• Dry flat in shade

• DO NOT use bealch or strong detergent.

• DO NOT machine wash.

• DO NOT wring or spin.

• DO NOT dry clean.

• DO NOT iron.

1. Remove Mattress from rolled up position and let the mattress inflate. Retighten valve caps.

2. Using mild soapy lukewarm water wipe down the mattress.

3. Allow it to air dry in the shade.

4. Store unrolled with the valve caps open. NOTE: Leaving the mattress deflated and rolled up for long periods of time will shorten the mattresses life span. Avoid packing away the mattress if wet. If the mattress has been stored wet, open it at as soon as possible to stop any chance of mould or mildew growing.

3Adventure Kings Self-inflating Foam Mattress 2Adventure Kings Self-inflating Foam Mattress

INSTRUcTIONS - SET Up

1. Pullyourmattressoutofthecarrybaginasuitableopenspace.Unclipthe3clips(shownleft)androllthemattressoutsoitisfullyunfoldedandflat.

2. Yourmattresswillnowlooklikethisandit’stimestarttheinflationprocess.Startbyunscrewingthe4capsfoundonthe(logo)endofthemattress.Ensurethey’refullyunscrewedandtheholesareopenforairtoenter.Keepthecapsopenuntilthemattressisfullyinflated.NOTE: Yourairmattresswillcomevacuumsealedtoreducethepackagingsize.Pleaseallow2hoursforfirstinflation.Afterthefirstuse,allow5-10minutestoinflateforeachuse.

3. Oncethemattressisinflatedtightentheaircapsfirmenoughthatairwon’tescape.DO NOTovertightenthem!

2Adventure Kings Self-inflating Foam Mattress

INSTRUcTIONS - SET Up

1. Pullyourmattressoutofthecarrybaginasuitableopenspace.Unclipthe3clips(shownleft)androllthemattressoutsoitisfullyunfoldedandflat.

2. Yourmattresswillnowlooklikethisandit’stimestarttheinflationprocess.Startbyunscrewingthe4capsfoundonthe(logo)endofthemattress.Ensurethey’refullyunscrewedandtheholesareopenforairtoenter.Keepthecapsopenuntilthemattressisfullyinflated.NOTE: Yourairmattresswillcomevacuumsealedtoreducethepackagingsize.Pleaseallow2hoursforfirstinflation.Afterthefirstuse,allow5-10minutestoinflateforeachuse.

3. Oncethemattressisinflatedtightentheaircapsfirmenoughthatairwon’tescape.DO NOTovertightenthem!

Instructions - Set Up

4Adventure Kings Self-inflating Foam Mattress

Instructions - Pack Up1. Start by unscrewing the air caps on

your Adventure Kings Self Inflating Mattress:

2. Lay your Self Inflating Mattress straps on the ground, flat, so they are easy to wrap around the mattress once folded.

3. Starting at the opposite end of the air caps, roll the mattress towards the air vents applying pressure downwards.

5Adventure Kings Self-inflating Foam Mattress

Instructions - Pack Up Cont.4. When you reach the end of the roll,

push firmly on the mattress to push out the last of the air. Then screw on all four of the air caps. Now no air should be able to enter the mattress.

5. Un-roll the now deflated mattress back.

7. Then fold the mattress over itself again.

6. Fold the length of the deflated mattress back over itself.

6Adventure Kings Self-inflating Foam Mattress

Instructions - Pack Up Cont.8. Put the folded & deflated mattress

onto the straps, wrap them around the mattress and connect them. They should be firm against the sides of the mattress.

9. Place the folded, deflated and strapped mattress into the included bag.

7Adventure Kings Self-inflating Foam Mattress

WARRANTY PERIOD:

Full 12 month warranty from date of purchase against all manufacturing defects.

WHAT DOES THE WARRANTY COVER?Under normal usage conditions, this warranty covers:

a. Any defect in design or manufacture which results in the product failing to perform substantially as described in authorised advertising or literature.

b. We will either repair or replace the product at our discretion providing that the fault is found to have been caused by a design or manufacturing defect and not misuse or tampering.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits provided to you as the consumer by this warranty are in addition to other rights and remedies available to you under the law.

THE WARRANTY DOES NOT COVER:a. Any damage resulting from improper use

b. Faulty installation or modification made during installation

c. The cost of removing and reinstalling the product

d. Travel and /or other expenses due to customer’s remote location

e. Transport charges and damage in transit. It is your responsibility to deliver and pick up your product, including any costs associated with the postage of your repair or replacement product. If you do freight your product we recommend that you insure against loss or damage.

f. Any loss directly or indirectly associated with the product failing to operate.

g. Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents and fair wear and tear

TO MAKE A CLAIM, PLEASE ENSURE YOU RETAIN YOUR SALES RECEIPT OF PURCHASE

CALL 1800 88 39 64

12 MONTH LIMITED

WARRANTY

OUTDOOR SUPACENTRE PTY LTD2 Stanley St Silverwater NSW, 2128PHONE: 1800 88 39 64www.4wdsupacentre.com.au