Select your mission level Beginner Intermediate Advanced

Embed Size (px)

Text of Select your mission level Beginner Intermediate Advanced

  • Slide 1
  • Slide 2
  • Select your mission level Beginner Intermediate Advanced
  • Slide 3
  • Beginner Intermediate Advanced Mission: Use the robot to position 3 gears on pegs. Time: 4 minutes Wait! The automated robot must start the timer before you may begin your mission. Warning! When the clock hand reaches the top, time is up! Command Center: Use the joystick to control your robot. Hold the button to attach a gear. Release the button to drop the gear. Press START when you are ready.
  • Slide 4
  • Beginner Intermediate Advanced Mission: Use the robot to position 3 gears on pegs. Time: 3 minutes Wait! The automated robot must start the timer before you may begin your mission. Warning! When the clock hand reaches the top, time is up! Command Center: Use the joystick to control your robot. Hold the button to attach a gear. Release the button to drop the gear. Press START when you are ready.
  • Slide 5
  • Beginner Intermediate Advanced Mission: Use the robot to position 3 gears on pegs. Time: 2 minutes Wait! The automated robot must start the timer before you may begin your mission. Warning! When the clock hand reaches the top, time is up! Command Center: Use the joystick to control your robot. Hold the button to attach a gear. Release the button to drop the gear. Press START when you are ready.
  • Slide 6
  • Progress: Insert progress bar here? Wait! The robot must assemble the gears to start the timer before you may begin your mission.
  • Slide 7
  • Command Center Activated In. 5
  • Slide 8
  • 4
  • Slide 9
  • 3
  • Slide 10
  • 2
  • Slide 11
  • 1
  • Slide 12
  • Command Center Activated Complete your mission by placing 3 gears on pegs before the timer reaches the top!
  • Slide 13
  • Times Up! The mission platform is now being reset.
  • Slide 14
  • Mission Successful! The mission platform will be reset momentarily.
  • Slide 15
  • The mission platform is now being reset.