Seavi 05 Boxes for switches and differential, serie 79

GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The boxes for switches and differential Serie 79, are destinated to accomodation for the differents elements. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. They have several input footprints for tubes and does not need any tools for its drilling. It has metalic guide to fix the several elements , as well as a guide for dividing the space to house the (ICP 32) power switch. These boxes are modular, you can link to each other vertically, as many as the installer needed, using pieces of link. The doors and frames are individual. The doors have vents and also have a very strong nylon hinges with easy assembly and disassembly. They come in two models: with space for (ICP32) or without space. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,500 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 1.80 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar.

17

SEQUENCE OF ASSEMBLING FOR BOX REF.23077 SEQUENCE OF ASSEMBLING FOR BOX REF. 23079 The assembling it´s the same for all references in this serie

FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall.

Boxes for switches and differential Serie 79 Of flush mounted

REF. 23047 REF. 23158

REF. 23159

Pieces/packing: 1 Unit Price: 38,6800 €

Measures mm: 380 x 384 x 83 Pieces/packing: 1 Unit Price: 16,2700 €


BOX OF 24 ELEMENTS + 4 SEALED ICP 32- 40

BOX FOR REF. 23047

FRAME+LIDS+SCREWS FOR BOX REF. 23047

18

REF. 23268 REF. 23272 REF. 23270




FRAME+DOOR+LIDS+SCREWS FOR BOX REF. 23268

REF. 23079 REF. 23279 REF. 23278






BOX FOR REF. 23079

BOX OF 16 ELEMENTS + ICP 32

BOX FOR REF. 23268


19

REF. 23048 REF. 23154 REF. 23155




BOX OF 32 ELEMENTS + 4 SEALED ICP 32 - 40

BOX FOR REF. 23048


REF. 23076 REF. 23275

REF. 23277





BOX FOR REF. 23076


REF. 23049 REF. 23156

REF. 23157





BOX FOR REF. 23049



20

REF. 23050 REF. 23152 REF. 23153





BOX FOR REF. 23050


REF. 23077 REF. 23275-1 REF. 23277-1




BOX OF 32 ELEMENTS + 8 SEALED

BOX FOR REF. 23077


REF. 23267 REF. 23272-1

REF. 23270-1




BOX OF 24 ELEMENTS + 8 SEALED

BOX FOR REF. 23267



21

REF. 23279-1

REF. 23278-1




BOX OF 22 ELEMENTS

BOX FOR REF. 23078


REF. 23078

REF. 23269 REF. 23273 REF. 23271




BOX OF 36 ELEMENTS

BOX FOR REF. 23269



22

REF. 23249 REF. 23073 79

Measures mm: 18 x 50 Pieces/packing: 50 Unit Price: 0,1180 €

Unit Price: 0,2400 €

LITTLE BLIND LID 18 x 50 mm

REF. 23075 REF. 23274 REF. 23276




BOX OF 44 ELEMENTS

BOX FOR REF. 23075


PIECES OF LINK FOR SERIE


Documents

Seavi 05 Boxes for switches and differential, serie 79