Upload
hakiet
View
579
Download
39
Embed Size (px)
Citation preview
WannenpositionFlat positionASME: 1G
FallpositionVertical-down positionASME: 3Gd
PA
PA
FallpositionVertical-down positionPG
Horizontal-ÜberkopfpositionHorizontal overhead positionASME: 4F
QuerpositionTransverse position
PC
PA
ÜberkopfpositionOverhead position
PE
SteigpositionVertical-up positionASME: 3Fu
PFRohr: festAchse: senkrechtSchweißung: horizontal
Pipe: fixedPipe axis: verticalWelding: horizontalASME: 2F
PB
Rohr: festAchse: waagerechtSchweißung: steigend
Pipe: fixedPipe axis: horizontalWelding: vertical-upASME: 5Fu
PH Rohr: festRohrachse: senkrechtSchweißung: horizontal-überkopf
Pipe: fixedPipe axis: verticalWelding: overheadASME: 4F
PD
HorizontalpositionHorizontal positionPB
Achse: rotierendRohrachse: waagerechtSchweißung: horizontal
Pipe: rotatedPipe axis: horizontalWelding: horizontalASME: 2FR
PB Rohr: festAchse: waagerechtSchweißung: fallend
Pipe: fixedPipe axis: horizontalWelding: vertical-downASME: 5Fd
PJ
PG
ÜberkopfpositionOverhead positionASME: 4G
PE
SteigpositionVertical-up positionASME: 3Gu
PF
QuerpositionTransverse positionASME: 2G
PCRohr: rotierendAchse: waagerechtSchweißung: Wannenposition
Pipe: rotatedPipe axis: horizontalWelding: flat positionASME: 1G
PA
Rohr: festAchse: senkrechtSchweißung: quer
Pipe: fixedPipe axis: verticalWelding: horizontal-verticalASME: 2G
PC
PH
Rohr: festAchse: waagerechtSchweißung: fallend
Pipe: fixedPipe axis: horizontalWelding: vertical-downASME: 5Gd
PJRohr: festAchse: geneigt (z.B. 45°)Schweißung: fallend
Pipe: fixedPipe axis: e.g. 45°Welding: vertical-downASME: 6Gd
J-LO45
Rohr: festAchse: geneigt (z.B. 45°)Schweißung: steigend
Pipe: fixedPipe axis: e.g. 45°Welding: vertical-upASME: 6Gu
H-LO45
Variable Achse /Variable axis
PA Waagerechtes Schweißen von Stumpf- und Kehlnähtenin Wannenpositionen
Horizontal welding of butt welds and fillet welds in flat position
PB Horizontales Schweißen von Kehlnähten
Horizontal welding of fillet welds
PC Querposition / Transverse position
PD Horizontal-Überkopfposition / Horizontal overhead position
PE Überkopfposition / Overhead position
PF Senkrecht steigend / Vertical up position
PG Senkrecht fallend / Vertical down position
PH Senkrecht steigend Rohr / Vertical up position pipe
PJ Senkrecht fallend Rohr / Vertical down position pipe
Zeichenerklärungen / Key to abbreviations
Kehlnähte / Fillet welds
Stumpfnähte / Butt welds
vaB
W 0
6/20
14 E
NG
/GE
R 4
000
WannenpositionFlat positionASME: 1F
Rohr: festAchse: waagerechtSchweißung: steigend
Pipe: fixedPipe axis: horizontalWelding: vertical-upASME: 5Gu
Schweißpositionen nach EN ISO 9606-1 / EN ISO 6947Welding positions according to EN ISO 9606-1 / EN ISO 6947and ASME code, section IX
PD
Rohr: rotierendAchse: geneigt (z.B. 45°)Schweißung: Wannenposition
Pipe: rotatedPipe axis: e.g. 45°Welding: flat positionASME: 1FR
voestalpine Böhler Welding GmbH
www.voestalpine.com/welding