SATA TECHNOLOGY CO., LTD - Tensile Testing Machine ...Equipments list Tester 3. Precision

Model Description Standards & Used range Photo

ST-2800AC/DC Hi-Pot &

Insulation Tester

1. Power supply: 220V/AC, 50Hz

2. Output Voltage: 0~5kV/AC and 0~5kV/DC

3. Leakage Current: 0.1~99.9mA/AC and DC 0.1~9.9mA/DC

4. Insulation resistance: 0~2000MΩ

5. Insulation test voltage: 500V/1000V (DC)

6. Output power: 750VA

7. Display: LCD with back light

ST-2810 Insulation Resistance

Tester

Technical parameters:

1. Test voltage: 100/250/500/1000V ± 5%, 4 ranges,

2. Test voltage mode: manual wave band switch

3. Test range: 0.2×106~2×10

9Ω, precision: ±3%

0.2×1010

~2×1012

Ω, precision: ±5%

0.2×1013

~2×1015

Ω, precision: ±10%

4. Display: LED

ST-2810A Insulation Resistance

1. Test Voltage:10, 50, 100, 250, 500, 1000V, Precision ±

5%

2. Resistance measuring range 1×106~1×10

17

12 12

SATA TECHNOLOGY CO., LTD

Tel: +86 769 83814636 Fax: +86 769 82833989

E-mail: [email protected] or [email protected] www.sata-test.com

Equipments list

ST-2810ATester 3. Precision <10

12 is ±10%, more than 10

12 is ±20%

4. Micro-current measuring Test range 1×10-5

~1×10-14

ST-2810FHigh Insulation Resistance

Tester

1. Test Voltage 100, 250, 500, 1000V for choice

2. Resistance range 0~2×1017 ohms

3. Display 3 1/2 digital LCD display

4. Power supply 8.5V-12.5V/DC (8pcs of #1 Batteries) or

220V/AC

5. Test Time 1-7min can be preset.

6. LCD display

Electrode box used together with Insulation Resistance

Tester

ST-5221

Power Cord Plug Tester

(Display by point meter

and not grounding

resistance)

ST-5221E


(Display by LCD, with

grounding resistance)

ST-5801


(Display by touch screen,

without grounding

resistance)


Standard: According to UL, VDE, BSI,

SAA, T‐MARK, KS, IRAM,

CCC standards

Range: Used for testing the Continuity &

Polarity, insulation, High Voltage,

Exposed copper (conductor), and

relative length for single end plugs

(like 2P non‐polarity or polarity, 3P non‐polarity or

polarity) and Double‐end plugs (like

2P non‐polarity, 2P parallel, 2P cross, 3P parallel, 3P

ST-5801Z


(Display by touch screen,

with grounding

resistance)

2P non‐polarity, 2P parallel, 2P cross, 3P parallel, 3P

cross)


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-

5806Series

Plug and Socket

Endurance Tester

According to GB15092.1-2003, GB16915.1-2003,

IEC61058-1:2000, BS EN 61058, IEC60669, UL61058-2000,

UL1054, BS EN, 60669-1:2000, BS 3676-1:2000 etc.

ST-

5816PTS

Temperature Rising Tester

(Terminals/Plugs/Switches

& Connetor)

This tester applies to temperature rise test for plugs,

sockets, switches, terminals and connectors

ST-5816P

插头温升试验机

Plug Temperature Rising

Tester

This tester applies to temperature rise testing for plugs

with load condition, it according to

UL‐817, IEC and GB standards etc.

ST-5831Digital Voltage Drop

Tester

It is suitable for voltage drop, which has adjustable large

current for output, micro‐voltage testing,Tester

digital display

ST10-C Rubber Thickness Meter

This thickness meter are specified for the most

common types of insulating and jacket compounds,

vulcanization rubber plastic and of cables, wires and

cords. It has simple configuration, easy usage and high

precision

ST-6600 Skin High Voltage Tester

Applied to detect the conductor of power cord plug

whether exposed

ST-6601Insulation & Continuity

Tester

It used to check the insulation resistance and conductor

continuity testing for 2 cores of AC/DC power cord,

Audio line plug, earphone line plug and Video plug etc.

ST-6603Fixture of DC Resistor

Bridge

ST6603: Section area≤240mm2 (Max OD is 16.0mm)

ST6603M: Section area 500mm2 (Max OD is 25mm),

ST6603L: Section area1000mm2

(Max OD is 35 mm)

ST-6603ADigital DC Resistor

Measuring Tester

This machine applies to measuring resistance of single-

conductor, multi-inter twisted wires. It can be used for

measuring resistance of mini type electromotor,

transformer and DC voltage of 1μV~2V etc.transformer and DC voltage of 1μV~2V etc.


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

QJ 57 Portable DC Arms BridgeMeasurement range is 0. 01μΩ ~ 1.111KΩ and divided into

seven ranges

ST-6604

Auto Cable Sandpaper

Abrasion Resistance

Tester

Applied to test the resistance to abrasion of Auto cable

insulation jacket in moving condition.

ST-

6604GM

Automobile Cable Scrape

Abrasion Tester

Standards: According to clause 9.3 of ISO6722-2006,

Clause 12(2) of JASO D611, Clause 3.3.3.2.2 & annex A.1 of

DIN 72551 part 5, QC730-2005 part 5.6.22, JB/T8139 etc.

Range: This Abrasion Tester consists of a device to abrade

the insulation surface, used to test characteristics of

abrasion resistance for Automobile cable

ST-6604GXCable Abrasion Resistance

Tester

Standards: GB 5013.1-2008/IEC 60245.1-2003, GB5013.2-

2008/IEC60245.2-1998, HD22.1 and VDE0281 etc.

ST-

6604DINMaterial Abrasion Tester

Standards: DIN53516, ISO/DIS-4649 and

GB-9867 etc.

Used range: Applied to the abrasion test for elastic

material, rubber, tires, conveyor belts, conveyor belts,

shoe soles, soft leather, leather materials etc.

ST-6604YZCable Ink Printing

Durability Tester

Standards: According to UL1581, UL2556, GB/T5013,

IEC60245, GB/T5023,IEC60227, GB/T 6995, VDE0472 etc.

Applicable scope: Applies to check the durability capability

of ink printing on the cables.

ST-6605 Hot Set Test Device

Standards: According to IEC 60811-2-1:2001, IEC60245-1:

2003, VDE 0472, GB/T2951.21-2008, GB/T5013.1-2008

etc.

ST-6605KResistance Crack Rollers

(Hot Shock Test Device)

GB/T2951.31, IEC 60811-3-1, VDE 0472, JIS C3005,

GB/T5023.1, IEC60227-1


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-6605LRLow Temperatuer Rolling

Test Device

According to GB/T2951.12-2008, IEC60811-1-2:1985,

GB2951.14-2008, IEC60811-1-4, VDE 0472, GB/T5013.1-

2008, IEC60245-1:2003, JIS C 3005:2000, GB/T5023.1-2008

and IEC60227-1:2007 etc.

It’s applied to test the probability of crack of wire, cable

insulation and sheathing in special temperature for testing

ST-

6605LRM

Low Temperature Rolling

Test Device (with Motor)

According to GB/T2951.12-2008, IEC60811-1-2:1985,

GB2951.14-2008, IEC60811-1-4, VDE 0472, GB/T5013.1-

2008, IEC60245-1:2003, JIS C 3005:2000, GB/T5023.1-2008

and IEC60227-1:2007 etc.

It’s applied to test the probability of crack of wire, cable

insulation and sheathing in special temperature for testing

ST-6605LCLow Temperature Impact

Test Device

In accordance with GB2951.4, VDE 0472Part611, IEC

60811-1-4 standards requirements.

Range: This machine applies to impact resistance

evaluation in low-temperature. Used with ST-9601 Low

Temperature Test Chamber.Temperature Test Chamber.

ST-6605LLLow Temperature

Elongation Tester

Standard: In accordance with GB/T 2951.4, VDE 0472 Part

616, IEC 60811-1-4 standards.

Range: This machine applies to elongation test for

insulation sheath such as: macromolecule materials, wires

and cables, rubbers, plastics, temperature -25~0℃

Used with ST-9601 Low Temperature Test Chamber

ST-6606Cable Flexing Test

Machine

Standards: IEC60245-2, IEC 60227-2, GB5023.2-2008,

GB5013.2-2008, UL1581-2006, HD21&22 standards etc.

Used range: Applies to inspect the damage of rubber

insulated and sheathed cables under the dynamic flexing

with load by times

ST-6606DTDynamic Flexural Strength

Tester

Standards: According to DIN 72551-5: 1991.

Used range: When the cables under the lower

temperature condition for flexural test, and whether any

crack and voltage resistance.

This tester used together with ST-9601 Lower

temperature chamber

ST-6606Y

Series

Cable Bending Test

Machine

Standards: UL817, GB2099, IEC 60884-1 etc.

Used range: Applied to test the bending resistance of plug

cable. When the sample breaks or achieves the presetSeries Machine

cable. When the sample breaks or achieves the preset

times, the machine will be stop automatically


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-6607High Temperature

Pressure Device

Standards: According to GB/T 2951.6, VDE 0472Part609,

IEC 60811-3-1 etc. standards;

Used rang: Applied to measurement the insulation of wire

& cable and sheaths under the heat and load condition for

test the deformation

ST-6607BP Ball Pressure Device

Standard: According with IEC884, GB2099, GB4706.1‐

2006, VDE0620 etc. standards.

Range: Applied to test the heating resistance of insulation

material, such as housing, exterior parts and plastic

ST-6608 Static Force Test Machine

Standards: According to UL817: 2007,

UL1310: 2001, UL697: 2004;

Scope: Applies to check the power plug cables for securityST-6608 Static Force Test Machine

Scope: Applies to check the power plug cables for security

of conductor test, Security of blades or pin test

ST-6609Abrupt Force Test

Machine

Standards: According to UL498: 2007,

UL817:2007

Scope: Applies to check fastened strength between the

plug pins and conductor cords

ST-6610CP Specimen Slice Machine

Used range: Applied to cut rubber, insulation or coating

materials, through the difference die to cutting difference

test sample for test demand, the shape of samples as

standard requirements

ST-6610CSingle Head Paring

Machine

Standards: According to IEC60811-1-1, GB/T2951.11-2008

etc


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-6610CCDouble-Head Paring

Machine

Standards: According to IEC60811-1-1, GB/T2951.11-2008

etc

ST-6610MSample Buffing

Machine(double-head)

according to GB/T2941-2006, ISO23529:2004, GB/T2951-

2008, IEC60811:2001, UL1581-2008, UL2556-2008 etc

Range: This machine applies to abrading/grinding the

rubber/plastic dumbbell to the required thickness.

Worktable can be moved freely and safety.

ST-6610YPHot Press Machine

(Manual type)

This press machine as a manual operation mode, and

suitable for rubber, plastics, chemical industry, etc., will

be placed in the mold material, sandwiched between the

mechanical and electrical hot plate, to pressure and

temperature, the raw material molding.

ST-6610PPHot Press Machine

(Hydraulic cylinder type)

Used range: The vulcanizing machine applied to vulcanize

kinds of rubber products, it’s the advanced hot-pressing

device of kinds of thermosetting plastics, applied in

laboratory of factory and quality inspector.

ST-6610KLDouble Roll Mixing

Machine

Suitable to mixing and processing of rubber and plastics

of industries polymers, such as PVC and Color Master

Batch etc

ST-6611 Conductor Damage Tester

Standards: According to GB2099.1, GB16915.1, VDE0620-

1, IEC60884-1, GB 16915.1 etc.;

Scope: Applies to check the conductor damage for

terminal with a screw clamping and screwless terminal, to

test the conductor in the clamping pieces if there were

excessive damage conductor

ST-6612Auto Cables Cross-linking

TesterClause 6.11 of SAE J1128

ST-6613 Clamping Gauge

1) 8pcs/set: 1.0, 1.5, 2, 2.5, 3, 4, 6, 8mm

2) 27pcs/set: 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9,

2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0,ST-6613 Clamping Gauge 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0,

8.5, 9.0, 9.5, 10.0mm


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-6615DC DC Spark Tester(15kV/DC)

ST-6615HFHigh Frequency Spark

Tester

ST-6615GP AC Spark Tester (15kV/AC) Standard: In accordance with UL1581, NEQ IEC 885-2

standards.

Range: This Spark Tester Series applies to checking the

insulation quality of the wires and cables during high

Standards:

Sensitivity and stability requests as UL1581. VDE0472.

CenelecTC20. BS5099 & CS etc;

Security standards in accordance with DIN/VDE0800 &

IEC479-1;

EMC as EN50081-1, EN50082-2, and LVD as EN61010-1

ST-6625GP AC Spark Tester (25kV/AC)

ST-

2001/2000Pre-heater

Copper, Aluminium, iron, Nickel alloy, stainless steel, etc.

1) ST-2000: diameter is 0.12~1.5mm, 8kW, 0-280 deg C,

Speed is 850m/min

2) ST-2001: diameter is 0.1~2.0mm, speed is

0~1400m/min

ST-2115A Pre-heating machineCopper, Aluminium, iron, Nickel alloy, stainless steel, etc.

0.18-3MM

ST-2116COPPER POWDER FILTER

Machine

Applies: During the copper wire drawing process, to filter

the suspension of copper in wire drawing oil, removal and

recycling, to ensure that the wire drawing oil clean.

Ensure the use life of extended line mode, reduce the oil

in the pipe blocking and reducing the abrasion of the

pulley, so the extension line of the oil with better

conditions of use.

LDM-XY

series

Two-dimensional Laser

Diameter Gaug

Summary: Two-dimensional Laser Diameter Gauge is the

high-accuracy survey instrument that uses the laser scan

of no-touch and measuring on line. Both directions (X axis

and Y axis) for measuring the diameter.

insulation quality of the wires and cables during high

voltage.


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

LDM Series

Laser Diameter Gauge

(including the controller,

stand)

Applicable to measure the diameter and controlling of

metal wires, glass, pipes, rubber pipes, wire and cable etc.

Bi-directional measurement at same time and showing the

average, at the same time can be display O/D and

roundness of cable and pipes etc

STCD

Series

Cable Length Counter

(Pedrail type)

1. Countable length: 0~99999.99m

2. Cumulative length: 0~9999999m

3. Accuracy: 0.1%

4. Diameter of cable: 1-60mm or others (e.g 150mm)

Marking Machine for

Cable

Initiative Type

Used Range: It is applies to mark on the wire and cable of

online sports, PVC and PE tubes(soft or hard type), the

printing quality meet the standards of UL, CSA, VDE, JIS

and others requirementsand others requirements

Marking Machine for

Cable

Passive Type

Used Range: It is applies to mark on the wire and cable of

online sports, PVC and PE tubes(soft or hard type), the

printing quality meet the standards of UL, CSA, VDE, JIS

and others requirements

LX-AShore Hardness Meter

(Point meter with stand)

Applied to test hardness of general rubber, synthetic

rubber, vulcanized rubber, soft rubber, leather, wax, etc.

This hardness test gauge head is placed on the platform,

convenient and accurate; it can also be taken off to test

on production field.

TH200

Digital Shore Hardness

Tester(without stand)

Type LX-A ditital display

Applied to test hardness of general rubber, synthetic

rubber, vulcanized rubber, soft rubber, leather, wax, etc.

This hardness test gauge head is placed on the platform,

convenient and accurate; it can also be taken off to test

on production field.

ST-6360

SeriesCable harness Tester

Test voltage: Max 1500V/DC, 1000V/AC.

Four lines for measuring, the continuity resistance is

widely,

from 1mΩ to 500Ω.Series

Test points: Max. 256 test points

Short circuit and Open circuit, the accuracy of the result of

the judgment


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-6801

SeriseCABLE HARNESS TESTER

Test voltage: Max 700VDC, 500VAC

Test Points: Max 256 points or others as cutomer's

request

ST-7601DUL Cable H/V Flaming Test

Chamber

According to 1060(vertical burning and FT1 test),

1061(cables burning test), 1080(VW-1 burning test),

1090(electric cable specimen horizontal burning test,

optional item), 1100 (horizontal specimen/ FT2 burning

test)of UL1581-2008,

9.1~9.5 of UL2556-2007, 4.26 of JIS C3005-2000

ST-7601S UL Cable Vertical-Tray

Flaming Test Room

Standards: According to the clause 9.6 & 9.7 of

UL1685-2007, UL2556-2007

ST-7602LHalogen Release

Measurement Device

According to GB/T17650.1-1998, GB/T17650.2-1998, IEC

60754-1:1994, IEC 60754-2:1991 standards etc.

ST-7602Y

Smoke Density Testing

Chamber

(including the chamber

made of stainless steel)

According to GB/T17651.1-1998, IEC61034-1997,

GA306.1-2007, GA306.2-2007 and GB/T19666-2005

ST-

7602NBS Smoke Density Tester

According to GB 8323 and NBS ENS 711 of ASTM E 662 etc

Applied to determine smoke density and wildly accepted

by many industries, such as plastics, rubbers, cover

fabrics, painted surfaces, woods, etc

ST-

7603A/B

Single Cable Vertical

Flaming Tester

According to GB/T 18380.11-2008, IE 60332-1-1: 2004,

GB/T 18380.12-2008, IEC 60332-1-2: 2004, GB/T

18380.13-2008, IEC 6033 2-1-3: 2004, EN 50265 -1, EN

50265 -2-1


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-7603C

Single Cable Vertical

Flaming Tester--Auto type

with Hood

According to GB/T 18380.11-2008, IEC 60332-1-1: 2004,

GB/T 18380.12-2008, IEC 60332-1-2: 2004, GB/T

18380.13-2008, IEC 60332-1-3: 2004, EN 50265-1, EN

50265-2-1, GB/T5169.14-2007 and IEC 60695-11-2: 2003

ST-

7603DUL

Horizontal and vertical

flame tester

Applying flame Angle (0o , 20

o, 45

o), applying flame to the

specimen of horizontal or vertical form state several

times, by whether lighting, the specimen burning time,

specimen scorching rays time, specimen burning rate and

ignites thing under the sample whether ignites to assess

the specimen’s flammability

ST-7603SWire & Cable Bundle

Flaming Tester

According to GB18380.31:2008, IEC60332-3-

10:2000,GB/T19666-2005,and GA306.1-2007Flaming Tester 10:2000,GB/T19666-2005,and GA306.1-2007

ST-7604

Automobile interior

materials Flammability

Tester

according to DIN7520, GB8410-2006 etc.

Applied to test the flammability of automobile interior

materials, such as cars, carriage and load truck etc.

ST-

7604QXZ

Auto-cables Flame

Resistnace TesterJIS C3005, ISO6722, QC/T730 etc

ST-7604QCAutomotive Cables Flame

Resistance Tester

Standards: As Clause 12 of ISO 6722-2006, Clause 6.6 of

SAE J1128-2005, Clause 5.9 of QC/T730-2005, DIN72551-5,

SAE J1127 and SAE J 1128 etc.

Scope: Applied to automotive cable to resistance flame

testing

Structure: It is consist of electrical control system, burn

room, Bunsen burner, Solenoid valves, high pressure

Ignition, gas pipes, high pressure values, timers, signal

ST-7605 Oxygen Index Testeraccording to B/T2406.1-2008,GB/T2406.2-2009, ISO5489-

ST-7605 Oxygen Index Testeraccording to B/T2406.1-2008,GB/T2406.2-2009, ISO5489-

1:1996, GB/T8815-2008, and GB/T5454


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST- 7606Wires and Cables

Resistance to Fire Tester

According to GB/T19216.11-2003, GB/T19216.21-2003,

GB/T19216.23-2003, GB /T19216.25-2003, IEC60331-

11:19999, IEC60331-21:1999, IEC60331-23:1999,

IEC60331-25:1999, GB/T19666-200 and BS6387

ST-7606Z

Wire & Cable resistance to

Fire with Mechanical

Shock Tester

Standards: According to IEC60331-11, IEC60331-21, IEC

60331-1, IEC 60331-2, EN50200, EN50362, BS6387: 1994,

BS7846, BS8431-1, BS8434-2, BS8491 etc

ST-7606SWire & Cable Resistance

to Fire with Water Tester

According to IEC60331-11, IEC60331-21, IEC 60331-1, IEC

60331-2, EN50200, EN50362, BS6387: 1994, BS7846,

BS8431-1, BS8434-2, BS8491 etc.

ST-7607Mining Cable Burning

Tester

Apples to check the coal mine cable for flaming resistance

test and cable connector head flaming test

ST-7608

SeriesGlow-Wire Tester

According to IEC60695-2-10~13, GB/T5169.10~13:2006,

UL746A, IEC829, DIN695, VDE0471etc

ST-7609

SeriesTracking Test Chamber

According with IEC60112-2003, UL746, ASTMD3638-92,

DIN53480, GB4706.1 and GB4207 standards.

It pplies to determine the tracking index for electrics of

various products, such as lighting, electronics, electric

tools and instruments. It is also used for insulators,

plastics, electric connectors and so on.

ST-7609HHHigh Voltage Tracking

Tester

According to GB/T6553-2003, IEC60587-2007 standards

etc.

Used range: Applied to assess performance of all kinds of

electrical insulating material’s resistance to electrical track

and erosion conditions

ST-7610 Needle Flame TesterAccording to IEC60695-2-10~13, IEC829, GB4706.1 and

GB/T5169, UL746A, DIN695 and VDE0471


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST8601

Series

Conductor Elongation

Tester

According to 3.1 of GB/T 4074.3-2008, IEC 60851-3:1997

Used range: Applied to check the conductor elongation

rate of wire and cable, like the aluminum, copper, iron

material etc

ST-8605BBending Force Test

Machine

Standards: According to JED-572-302 (3points Bending

test)

ST-8605UAuto-cable Flexibility

TesterStandards: According to ES91110-05

ST-8609AAutomatic Insertion &

Withdrawal Force Tester

This apparatus applies to measuring the Insertion and

withdrawal forces for various connectors and appliancesWithdrawal Force Tester withdrawal forces for various connectors and appliances

ST-8609B

Automatic Insertion &

Withdrawal Force Tester

with PC

This apparatus applies to measuring the Insertion and

withdrawal forces for various connectors and appliances

ST-8610

Series

Digital Push & Pull Force

Gauge

Used range: Applied to test various push and pull force to

difference specimen to be demand, General it use alone

with some test device.

Capacity range: 1/2/5/10/20/50kgf for choice

ST-8612MHorizontal Moving Tensile

Test Machine

1. Capacity: 10kgf

2. Test journey: 120mm

3. Speed: 10~300mm/min

4. Drive system: AC motor

ST-

8612LCD

Electronic Force &

Elongation Test Machine

According to GB 16491, GB/T 2951.1-1997, UL1581-2006:

420. 470. 481.4, IEC 60811-1-1, VDE0472 Part602


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

Materials Tensile Test

Machine (≥5000kgf)

LCD & PC both display

In accordance with GB 16491, GB/T 2951.1, UL1581, IEC

60811-1-1 standards

Capacity more than 5000kgf

Materials Tensile Test

Machine (< 5000kgf)

LCD & PC both display

In accordance with GB 16491, GB/T 2951.1, UL1581, IEC

60811-1-1 standards

Capacity less than 5000kgf

ST-8613

series

Electrical Rupture

Strength Tester

Standards: According to GB-6545, ISO-2759, JIS-P8112,

L1018, ASTM-D2210 and TAPPI-T403 etc.

Used range: Applied to test anti-rupture strength for raw

paper, corrugated cardboard, leather, cloth and synthetic

leather. Automatically retain the maximum rupture

strength values, and a warning sound.

Standards: According to ES-AU5-1A348 Rev. A, as request

to design.


ST-8612PC

ST-8615QCables Resistance

Flexibility Force Tester


9. Test peed: 50mm/min can be preset

10. Speed accuracy: ±1%

11. Weight: 2N

12. Pulleys: 6pcs which diameter is 29mm with R9

ST-8615WCables Insulation Striping

Tester

Standards: According to ISO 6722, IEC 60189-1, GB 13022,

GB/T1040, GB2792, GB/T 14344-9, GB/T 2191, QB/T2171

etc.

ST-8616Insulation Crush

Resistance Test Machine

Standards: According to clause 27 of UL758-2010, UL1581,

UL1277 etc.

Used range: Applied to test insulation on conductor to

resistance crushing force test.

ST-8617Auto-Cable Pinch

Resistance TesterStandards: According to clause 6.9 of SAE J 1128-2005

ST-8617C

Cables Insulation Dynamic

Cutting through

Resistance Tester

Standards: According to clause 5.6 of EN 50305, ASTM D

3032 (clause of 22), ES AU51A348 Rev. A

Used range: It is apply to the insulation wall of cables not

more than 0.38mm, if the thickness over 0.38mm, pleaseResistance Tester more than 0.38mm, if the thickness over 0.38mm, please

used the machine of ST-8616 Crush Resistance Test

Machine.


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-8617CD Notching Resistance

Tester

Standards: ES AU51A348 Rev. A

Used range: It is apply to the insulation wall of cables not

more than 0.38mm, if the thickness over 0.38mm, please

used the machine of ST-8616 Crush Resistance Test

Machine

ST-9601

Series

Low Temperature

Chamber

In accordance with GB/T 2951.4, UL1581, IEC 60811-1-4

standards requirements.

This machine applies to low temperature test, for wires &

cables, accessories and other products. used with low

temperature impact, low temperature twist and low

temperature elongation test.

ST-9602SDesktop Temperature &

Humidity Chamber

• The separation of humidifier circuit from electric circuit

improves safety and protects the circuit against the

leakage of water supply line.

• Available in Chinese and English LCD touch screen, easy

operation and program.

• Problem occurs during operation, the failure reason and

the troubleshooting appear on the screen instantly.

• Used to measure the heat resistance, cold resistance,

ST-9602P

PROGRAMMABLE

TEMPERATUER &

HUMIDITY CHAMBER

• Used to measure the heat resistance, cold resistance,

dryness resistance and humidity resistance of electronic,

electrical appliances, metal, building materials, packaging

materials and other similar materials.

• Temperature, humidity are rising or falling slope rate

controller(IEC60068-2-56, IEC60068-2-30)

• According to IEC60068, GB2423.1, GB2423.2, GB11158,

GB10589 and GB10586 etc.

ST-9603Xenon Lamp Aging

Chamber

ASTM G151/155, D398, E691, ISO1134,ISO105, ISO4582,

ISO4892, SAE J1885, SAEJ1960, GB/T 16422, IEC60068,

ISO4892-1, GB/T 12831, GB/T 2423, UL1581-2008

This apparatus is intended to induce property changes of

the wire, cable, rubber, textile, natural fabric, electronic

accessories and so on, associated with the end use

conditions, including the effects of sunlight, moisture, and

heat.

ST-9604

Series Salt Spray Chamber

Standards:GB2423.17-2008，IEC60068-2-11:1981，JIS

C0023-1989

Applicable Scope: Metal parts and other materials

resistance to salt mist

1) 600*450*400 mm

2) L900 * W600 * H500 mm

…….

ST-9605Oxygen & Air Bomb

Ageing Oven

GB/T2951.12, IEC60811-1-2, IEC60335-1, GB4706.1, GB

4706.8, IEC60335-2-17,GB/T5013.2, IEC60245-2

This machine applies to aging test for electrical wires &

cables & rubber jacket& plastic & artificial leather, and

other macromolecule materials. (Aging test via oxygen

and compressed air in specified pressure and

temperature)temperature)


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-9606ANatural Ventilation Ageing

Oven

According to GB/T 2951.2, VDE 0472, IEC 60881-1-2 etc.

Applies to determine aging property of rubber, plastics,

and insulators under specified temperature. It also applies

to heat extension, high-temperature pressure, thermal

deformation, and ball-pressure test.

ST-9606FForced-Convection Aging

Oven

Standards: According to UL1581-2006, ASTM D5423-2005,

ASTM D5374-2005, JB/T 7444-1994 and GB/T3512-2001

etc

It applied to measuring the insulation or rubber layer of

the wires and cables, comparing the tensile strength

before and after aging.

ST-9607Constant Temperature

Water Bath (15L)

Standard: According to GB/T2951.3-1997, UL1581-2006,

IEC60811-1-3, B12706, GB/T5013 and GB/T5023 etc.

Range: This device applies to a widely field including

biology engineering, medicine, food, chemistry,

metallurgy, petroleum, wires and cables. It is a uniform

constant field.


ST-9607Constant Temperature

Water Bath (200L)


IEC60811-1-3, B12706, GB/T5013 and GB/T5023 etc.

Range: This device applies to a widely field including

biology engineering, medicine, food, chemistry,

metallurgy, petroleum, wires and cables. It is a uniform

constant field.

ST-9608Constant Temperature Oil

Tank

GB/T2951.5, VDE 0472 Part 803, UL1581, IEC 60811-2-1

standards requirements.

Range: This machine applies to oil test for the enameled

wires & insulator & sheathing, which are made of rubber

or plastic.

ST-9609Thermal Stabilization

Tester

Standards: According to clause 9 of IEC 60811-3-2: 1985

and GB/T2951.32-2008 etc.

Range: Applies to the soft PVC of wires & cables, plastic

insulation sheath for thermal stabilization testing at 200±

0.5℃.

ST-9610 UV Ageing Chamber

Standards: In accordance with ASTM D4329, D499, D4587,

D5208, G154, G53, ISO 4892-3, ISO 11507, EN 534, EN

1062-4, BS 2782, JIS D0205, SAE J2020, and reference

standards of GB/T14522-93, GB/T16585-1996,

GB/T16422.3-1999

ST-9611

IPX1&IPX2

IPX1 & IPX2 Water

Vertical drips deviceStandards: GB4208-2008, IEC60529-2001

Standards: According to GB4208-93, GB10485, IEC60529-ST-9611

IPX3,IPX4

Splash Water Protection

Test Chamber

Standards: According to GB4208-93, GB10485, IEC60529-

2001Degreees of protection provided by enclosures

(IPX3,IPX4 and IPX4K) and reference ISO 20653.


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-9611

IPX5,IPX6Spray water Device Accordance with GB4208-93, GB10485, IEC60529-2001 etc

ST-9611

IPX8

Immersion Water Tester

with Pressure

Standards: According to Clause 6 of ISO 20653,

IEC60529:2001 Degrees of protection provided by

enclosures(IP Code), Clause 14.2.8 of GB4208-2008, and

Clause 9.2.9 of GB7000.1

ST-9611-9KHigh Pressure Splash

Water Test Chamber

Standards: IEC60529-2001, GB 7000, GB 4208-2008 and

ISO 20653 of Fig. 7: IPX9K

Standards: According to clause 5.4.2 of ISO 16750-4,

M3499-1

ST-9611WThermal Shock in Splash

Ice Water Test Chamber

M3499-1


1) Work room size: L1000*D900*H800 made of Stainless

steel

2) Spray nozzle: 220mm width

3) Dust water temperature: 0~4oC

ST-3007 Digital Profile ProjectorStandard: GB/T 2951, GB 5013, GB5023, UL1581, VDE

0472, IEC60811, IEC 60245.IEC60227

1510G Video Measuring Machine

Standards: According to GB/T 2951-2008, GB 5013-2008,

GB5023-2008, UL1581-2006, VDE 0472, IEC60811-2001

and IEC 60245-2 etc.

Applicable Scope: Applicable to measure the thickness of

insulation and sheath of wires and cables, also can be

used to other parts, such as stamping parts, cam, screw,

gear, electronic parts etc

15J Measuring Microscope

Standard: In accordance with GB/T 2951.1, GB/T 2951.6,

GB 5013, GB5023, UL1581, VDE0472 Part 401&402,

IEC60811-3-1, IEC 60245-2 standards requirements.

ST-301R

Cable Auto Bundling

Machine

Package machine

Scope: Suitable for AC / DC cable, headphone cable,

power cord wire automatic strapping used to solve the

distress caused by the hand-banding line, such as tied

irregular line sizes, slow


Tel: +86 769 83814636 Fax: +86 769 82833989


Equipments list

ST-301RZ Cable Auto Winding &

Bundling Machine

AC/DC power cord, USB cable, video cable, HDMI cable,

and other types of transmission line with a plastic bag

core twist tied into a bundle, and can also be used to tape

other use coated core sealingwith. This machine can

reduce the fatigue strength of the staff, improve work

efficiency, saving Ties characteristics. Employees simply on

line automatic winding winding window, and then around

a good line on the Norse mouth, the machine can

automatically Ties. The native Norse length, laps setting,

production count.

500-196-20 digital caliper (0-150mm)

530-312Vernier Caliper (0-

150mm)

293-831 Digimatic Micrometer

Documents

SATA TECHNOLOGY CO., LTD - Tensile Testing Machine ...Equipments list Tester 3. Precision