9
SAS 9.0 Installation Guide 1.0 Created By: Kuber Chaurasiya Corrected By:--Nahush Sathe Software Courtesy: Jaydeep Das File Information We have the following image files 1. Disk1 Setup Disk 2. Disk101 Software Disk 1 3. Disk102 Software Disk 2 4. Disk103 Software Disk 3 (Not to be used) 5. Disk301 SAS/Secure Windows 6. Disk901 SAS Shared Components Along with the Crack folder containing 1. Sas9834961.txt <- This is very Important file 2. Instructions.txt 3. Sashost.dll(may be created after the installation) Install DAEMON Tool Lite If your computer doesn’t have DAEMON tool, install it from the given set up DTLite4355-0068.exe.

SAS 9.0 Installation Guide

Embed Size (px)

Citation preview

Page 1: SAS 9.0 Installation Guide

SAS 9.0 Installation Guide 1.0 Created By: Kuber Chaurasiya

Corrected By:--Nahush Sathe

Software Courtesy: Jaydeep Das

File Information

We have the following image files

1. Disk1 Setup Disk

2. Disk101 Software Disk 1

3. Disk102 Software Disk 2

4. Disk103 Software Disk 3 (Not to be used)

5. Disk301 SAS/Secure Windows

6. Disk901 SAS Shared Components

Along with the Crack folder containing

1. Sas9834961.txt <- This is very Important file

2. Instructions.txt

3. Sashost.dll(may be created after the installation)

Install DAEMON Tool Lite

If your computer doesn’t have DAEMON tool, install it from the given set up

DTLite4355-0068.exe.

Page 2: SAS 9.0 Installation Guide

1. It will be used to mount the .nrg(image) files of SAS discs.

2. Restart, if instructed.

3. Change the date of computer now to (for simplicity current date) 2003

4. Mount image files using DAEMON Tool

5. Mount other three files too, after adding a total of 4 drives

Installing SAS

1. You should Pause/Temporarily Switch off your Antivirus Program during

installation.

Page 3: SAS 9.0 Installation Guide

2. Now In the AutoPlay of Setup Disc, click on Run setup.exe.

3. Now Run the ‘Verify system Requirements’, and install, if any supporting software

is required.

4. The Installation procedure starts now. Click on ‘Install SAS Software ’.

5. After a default NEXT, it will ask for a file

Page 4: SAS 9.0 Installation Guide

6. Click on the ‘File’ option and choose the ‘sas9834961.txt’ file from Crack folder.

Click on next.

7. Keep clicking next.

Page 5: SAS 9.0 Installation Guide

8. Click on ‘Select Licensed Software’

9. Enter the location of Software Disc 1 here.

Page 6: SAS 9.0 Installation Guide

10. Follow a similar procedure for Software Disc 2 and SAS Secure Windows.

11. Note: We can mount only 4 discs at a time in DT Lite, mount Disk901 ( SAS Shared

Components) replacing Software Disc 1or 2 or SAS Secure Windows.

12. Now it will ask for ‘SAS Shared Components Disc’. Enter path and wait.

13. It’ll take some time (depending upon your system configuration).

Page 7: SAS 9.0 Installation Guide

14. And… now…

Your SAS is running.

15. Type this sample code in the Editor and press run.

data abc;

input var;

datalines;

1

2

3

;

proc print;

run;

Page 8: SAS 9.0 Installation Guide

16. Now change the date back to the current.

17. Copy sashost.dll file from CRACK folder.

18. Go to ‘Program Files (or ‘Program Files(x86)’ )->SAS->SAS System->9.0’.

19. ‘Copy and Replace’ the copied file here.

Page 9: SAS 9.0 Installation Guide

20. Switch on/Resume your Antivirus Program.

21. Now unmount image discs and remove the virtual drives using DAEMON Tool.

22. Now you have SAS, “The Power To Know”.