4
WAPSA UP Series Samurai Submersible Pump is a superior quality, robust & reliable submersible, designed with a vortex impeller & a wide body casing capable of handling up to 35mm spherical diameter solids. Corrosion resistant, light weight design stainless steel & composite resin materials including back pull-out design makes access, inspection & maintenance easy with use of basic hand tools. Applications : Domestic sewage wastewater including small treatment plant & pump stations Industrial & domestic wastewater containing solids Stormwater sump drainage Specification: Temperatures up to 40°C pH Range from 4 to 10 Power: 0.25 kW to 0.75kW in both 240V & 415V Insulation Class F with IP68 Max submergence 10m WWW.WAPSA.COM.AU Contact for Inquiries: Brandon M:0468959646 / [email protected] UP SERIES - MATERIAL OF CONSTRUCTION SPECIFICATION SHEET Samurai Submersible - UP Series Vortex Impeller Pump

Samurai Submersible - UP Series Vortex Impeller Pump · Samurai Submersible Pump range consists of: Size: 25 mm to 1600 mm Power: 0.15 kW to 630 kW Flow: up to 474 m3/min (7,906 L/Sec)

  • Upload
    others

  • View
    9

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Samurai Submersible - UP Series Vortex Impeller Pump · Samurai Submersible Pump range consists of: Size: 25 mm to 1600 mm Power: 0.15 kW to 630 kW Flow: up to 474 m3/min (7,906 L/Sec)

WAPSA UP Series Samurai Submersible Pump is a superior quality, robust

& reliable submersible, designed with a vortex impeller & a wide body

casing capable of handling up to 35mm spherical diameter solids. Corrosion

resistant, light weight design stainless steel & composite resin materials

including back pull-out design makes access, inspection & maintenance

easy with use of basic hand tools.

Applications :

• Domestic sewage wastewater including small treatment plant & pump

stations

• Industrial & domestic wastewater containing solids

• Stormwater sump drainage

Specification:

• Temperatures up to 40°C

• pH Range from 4 to 10

• Power: 0.25 kW to 0.75kW in both 240V & 415V

• Insulation Class F with IP68

• Max submergence 10m

WWW.WAPSA.COM.AU Contact for Inquiries: Brandon M:0468959646 / [email protected]

UP SERIES - MATERIAL OF CONSTRUCTION

SPECIFICATION SHEET

Samurai Submersible - UP Series Vortex Impeller Pump

Page 2: Samurai Submersible - UP Series Vortex Impeller Pump · Samurai Submersible Pump range consists of: Size: 25 mm to 1600 mm Power: 0.15 kW to 630 kW Flow: up to 474 m3/min (7,906 L/Sec)

UP SERIES - PERFORMANCE CURVES

MODEL OUTLET

(mm) MOTOR

(kW)

MAXIMUM HEAD (m)

MAXIMUM FLOW (m3/min)

WEIGHT (kg)

40UP2.25F 40 0.25 7.5 0.2 8.5

50UP2.4F 50 0.4 9.5 0.28 9

50UP2.75F 50 0.75 12.5 0.37 10

WWW.WAPSA.COM.AU Contact for Inquiries: Brandon M:0468959646 / [email protected]

UP SERIES - TECHNICAL DATA

Page 3: Samurai Submersible - UP Series Vortex Impeller Pump · Samurai Submersible Pump range consists of: Size: 25 mm to 1600 mm Power: 0.15 kW to 630 kW Flow: up to 474 m3/min (7,906 L/Sec)

Samurai Submersible Pumps

SUPERIOR FEATURES

Cable Entry – Water Ingress Protection

Every Samurai Submersible Pump has an anti-wicking segment design eliminating moisture incursion into the motor

as a result of any damage to the cable, through the capillary wicking action. Each strand of wire is stripped back to

the core and is completely sealed by vulcanized rubber (on smaller pumps) or epoxy mould (on larger pumps) to

insulate each strand of wire.

Motor Protection

All Samurai Pumps are fitted with motor protectors to protect the motor from overloading, particularly in times of

locked rotor.

Heavy Duty Shaft

Whilst most manufacturers are trying to cut costs of production of submersible pumps by making pumps lighter,

Samurai pumps maintains a heavy duty shaft, with low Length/Deflection ratios. The lower the ratio, the lower the

shaft deflection, results in lower rate of shaft fatigue for reliable operation.

Warranty

Samurai Submersible pumps are backed by a 3 Year Warranty, refer to WAPSA for details.

Dual Mechanical Seal

All Samurai Pumps include a Dual Mechanical Seal, with a vast

majority of models having both sets of seal faces manufactured

from Silicon Carbide. Smaller pump seals materials consist of

carbon/ceramic secondary seal with a Silicon Carbide/Silicon

Carbide primary seal. Primary seals are located completely out of

pumping liquid, operating in an oil filled chamber, ensuring trouble

free operation.

WWW.WAPSA.COM.AU Contact for Inquiries: Brandon M:0468959646 / [email protected]

Page 4: Samurai Submersible - UP Series Vortex Impeller Pump · Samurai Submersible Pump range consists of: Size: 25 mm to 1600 mm Power: 0.15 kW to 630 kW Flow: up to 474 m3/min (7,906 L/Sec)

PRODUCT OVERVIEW

Samurai Pumps are robust, reliable & competitively priced submersible that is suitable for a range of sewage &

wastewater transfer, process & treatment including contractor dewatering applications. Samurai Pump applications

include municipal, water, wastewater, sewage, industrial, construction, winery, mining, food process, pulp & paper.

The Samurai wastewater portfolio also includes a comprehensive range aerators, mixers & blowers.

Samurai Submersible Pump range consists of:

Size: 25 mm to 1600 mm

Power: 0.15 kW to 630 kW

Flow: up to 474 m3/min (7,906 L/Sec)

Types of Submersible Pumps:

Samurai Submersible Pumps

CONTACT FOR SUPPORT, SERVICE AND SPARE PARTS

WAPSA PTY LTD

1, 5-7 Paul Crt, DANDENONG VIC 3175

Tel: +61 3 9563 7285 or +61 (0)468 959 646

Email: [email protected]

Website: www.wapsa.com.au

The performance of the Samurai pump matches all other submersible pumps & is designed to deliver sustainable

solutions to the Australian wastewater industry.

The Samurai Submersible Pump is backed by a 3 YEAR WARRANTY to exceed your quality, durability and

performance standards of a superior design submersible pump.

Channel Cutter Vortex Semi-Open

Open Closed Axial Flow Mixed Flow Grinder