Upload
phungdiep
View
224
Download
0
Embed Size (px)
Citation preview
Samurai Submersible - SRK Series Slurry Pump
WAPSA SRK Series Samurai Submersible Pump is a superior quality, robust & reliable submersible, suitable for
a wide range of slurry applications. The superior quality & durability is attributed to its heavy duty cast-iron
casing, high chrome alloy impeller, inlet plate & agitator. Efficient motor cooling is achieved with side discharge
channel design cast as part of the motor housing, resulting in long lasting pump performance. The dual
mechanical seal design, operating in separate oil chamber combined with a 4-pole motor provides greater
torque & reduced wear, resulting in increased durability. The SRK Series pumps are ideally suited for high
concentration of slurry with the agitator maintaining the solids in suspension. This in combination with the
curvaceous casing design has the capacity to channel high concentrations of slurry, eliminating settling &
minimizes the risk of clogging.
WWW.WAPSA.COM.AU Contact for Inquiries: Brandon M:0468959646 / [email protected]
Applications:
• Civil works & construction site
dewatering.
• Ideally suited for applications
consisting of sand, gravel,
mud including bentonite slurry
• Mining, quarry & concrete
batch plant process &
transfer of abrasive slurry
Specification:
• Flow: Up to 6 m3/h
• Head: Up to 32 m
• Max Temperature: 40° C
• Max Submergence: 15m
• Power: 4kW to 22 kW
• Cable Length: 8m Std
• Insulation: Class F
• IP Code: 68
SPECIFICATION SHEET
MODEL
OUTLET (mm)
MOTOR (kW)
MAXIMUM HEAD (m)
MAXIMUM FLOW (m3/min)
WEIGHT (kg)
80SRK44 80 4 14.8 1.65 113
100SRK46 100 6 16.9 2.50 156
150SRK49 150 9 21.5 2.85 184
200SRK422 200 22 32.0 6.00 420
SRK SERIES - PERFORMANCE CURVES
WWW.WAPSA.COM.AU Contact for Inquiries: Brandon M:0468959646 / [email protected]
SRK SERIES MATERIAL OF CONSTRUCTION
ITEM NO PART NAME MATERIAL
01 Hose Coupling Cast Iron 02 Handle Steel
05 Upper Cover Cast Iron 07 Bearing House Cast Iron 11 Motor Body Cast Iron
13 Pump Body Cast Iron 14a Impeller High Chrome Alloy
14b Agitator High Chrome Alloy 16a Inlet Plate High Chrome Alloy
16b Inlet Plate Cast Iron 25 Strainer Steel 27 Stator 28 Rotor Shaft: AISI420SS
31a Bearing Ball Bearing 31b Bearing Ball Bearing 33 Motor Protector
34 Mechanical Seal Sic-Sic/Sic-Sic
Sic-Sic/Sic-Tc (22kW) 35 Oil Seal
47 Cable
Samurai Submersible Pumps
SUPERIOR FEATURES
Cable Entry – Water Ingress Protection
Every Samurai Submersible Pump has an anti-wicking segment design eliminating moisture incursion into the motor
as a result of any damage to the cable, through the capillary wicking action. Each strand of wire is stripped back to
the core and is completely sealed by vulcanized rubber (on smaller pumps) or epoxy mould (on larger pumps) to
insulate each strand of wire.
Motor Protection
All Samurai Pumps are fitted with motor protectors to protect the motor from overloading, particularly in times of
locked rotor.
Heavy Duty Shaft
Whilst most manufacturers are trying to cut costs of production of submersible pumps by making pumps lighter,
Samurai pumps maintains a heavy duty shaft, with low Length/Deflection ratios. The lower the ratio, the lower the
shaft deflection, results in lower rate of shaft fatigue for reliable operation.
Warranty
Samurai Submersible pumps are backed by a 3 Year Warranty refer to WAPSA for details.
Dual Mechanical Seal
All Samurai Pumps include a Dual Mechanical Seal, with a vast
majority of models having both sets of seal faces manufactured
from Silicon Carbide. Smaller pump seals materials consist of
carbon/ceramic secondary seal with a Silicon Carbide/Silicon
Carbide primary seal. Primary seals are located completely out of
pumping liquid, operating in an oil filled chamber, ensuring trouble
free operation.
WWW.WAPSA.COM.AU Contact for Inquiries: Brandon M:0468959646 / [email protected]
PRODUCT OVERVIEW
Samurai Pumps are robust, reliable & competitively priced submersible that is suitable for a range of sewage &
wastewater transfer, process & treatment including contractor dewatering applications. Samurai Pump applications
include municipal, water, wastewater, sewage, industrial, construction, winery, mining, food process, pulp & paper.
The Samurai wastewater portfolio also includes a comprehensive range aerators, mixers & blowers.
Samurai Submersible Pump range consists of:
Size: 25 mm to 1600 mm
Power: 0.15 kW to 630 kW
Flow: up to 474 m3/min (7,906 L/Sec)
The comprehensive range of Samurai Submersible Pumps include:
Samurai Submersible Pumps
CONTACT FOR SALES, SERVICE AND SPARE PARTS
WAPSA PTY LTD
1, 5-7 Paul Crt, DANDENONG VIC 3175
Tel: +61 3 9563 7285 or +61 (0)468 959 646
Email: [email protected]
Website: www.wapsa.com.au
The performance of the Samurai pump matches all other submersible pumps & is designed to deliver sustainable
solutions to the Australian wastewater industry.
The Samurai Submersible Pump is backed by a 3 YEAR WARRANTY to exceed your quality, durability and
performance standards of a superior design submersible pump.
Channel Cutter Vortex Semi-Open
Open Closed Axial Flow Mixed Flow Grinder