Protecting - Tracking - Reassuring

The AmegaView centralized monitoring system (CMS) is the most reliable way to protect valu-able product and archive valuable data. AmegaView is a networked system that collects wireless and wired reading from Mesa Monitoring probes installed in units on the premises. The hardware that collects the data then sends the data to a database where all of the readings are archived for future review, reporting, and analysis. Our wireless sensor options are the 418MHz, Wifi and our Green sensors that are available at 900MHz and 2.4GHz.

The AmegaView Centralized Monitoring System (CMS) also exists as an alarming system to alert the user of any readings that are outside the acceptance range for that particular product that is being monitored. The CMS phones, emails, and or texts the notification of an alarm to the user day or night. Multiple phone numbers, users, and phone lists can be programmed providing the client with the best line of defense against any issue regarding valuable product.

ThiThis system is important for any facility following a GxP standard of practices. The AmegaView system is 21 CFR Part 11 Compliant which allows a facility to have full accountability for all of the systems users and maintain a secure environment for all monitored product.

AMEgA VIEW hARDWARE

WhO WE MOnITOR• Pharma

• Life Sciences

• Blood Banks

• IVF Labs

• Biotechnology

• Hospitals

• Forensic Labs

• Food and Nutrition

• Pharmacy

WhAT WE MOnITOR• Refrigerators

• Freezers

• Incubators

• Humidity

• Room Temperature

• Room Humidity

• Stability Chambers

• Ovens

• Differential Pressure

• Water Levels

• Oxygen Levels

• Carbon Dioxide Levels

• Air Velocity

• 0-5mA Outputs

• 4-20mA Outputs

• Power Line Output

• And Much More!

There are 5 basic hardware components for the AmegaView system. These components are the probe, wireless transmitter, gateway, Dialer and Server. The probe is connected to the wireless transmitter. This transmitter sends the data to the Gateway so the readings can both be logged for temporary backup, and sent to the AmegaView database for permanent archiving.

AS-gateway: This is the component in the hardware that acts as the brain of the system. It can exist on a stand alone computer located on the site or on the network of the whole facility using a static IP address. The readings from all of the transmitters are stored on a 2G flash card for redundant backup and sent to a database.

AS-Dialer: This piece of hardware is the component that sends out a phone call using an analog line to a pre programmed phone list if an input goes into alarm. Each input will have a high and low limit programmed. If the AmegaView system collects a reading outside this programmed range the Gateway signals the Dialer to make a call. Phone lists can be programmed for both on and off business hours. Even holidays and vacation times can be set for users on a phone list.

Probe: Any type of measuring device that can be wired to a wireless transmitter. We offer probes that measure humidity, temperature/humidity, differential pressure, O2, CO2, water detection, air velocity and much more.

Wireless Transmitter: This 418, Green Solution 900/2.4Mhz or WiFi sensor then sends the reading to the Gateway.

Server Software: The AmegaView server software manages all connected clients and send all readings to the database.

The AmegaView system is also available as a hardwired CMS.

HOW IT WORKShOW DOES ThE AMEgAVIEW SYSTEM WORk?

H

A

GRAPH

i

LIVING DONOR 3

NACL 1

CORRIDOR2

NACL 2

NACL 3

NACL ROLL

EXIT

EMERGENCYEXIT

EXIT

TISSUEAGITATION

AREA

ENTRYGOWN

AUTOCLAVE STERILE SUPPLY

ENTRYGOWN

PACKAGINGSTAGING

MECHSPACE 1

MECHSPACE 2

PACK 2PACK 4

PACK 1PACK 3AUTOMATION

PREP 2

AUTOMATIONPREP 1

AUTOMATED SOAK & RINSE ROOM

MEN’S LOCKERWOMEN’S LOCKERMEN’S

WOMEN’S MATERIAL IN

PREP

DECON

TRITON SOAK 2

TRITON SOAK 1

LIVING DONOR 2

LIVING DONOR 1

1

2

3

4

8

9

5

6

7

10 12

11

14

13

i

ThE

SOfT

WAR

E O

f Th

E AM

EgAV

IEW

SYS

TEM

Programming Inputs - There are many different programming options available to users ranging from pre alarm high/low limits to scheduled vacation times for phone lists.

graphing Inputs - This graphing engine allows the user to graph readings for any time period. High and low limits can be shown on the graph.

Alarm handling - The alarm handling menu allows a user to inhibit/re enable inputs for an amount of time of their choos-ing.

history Readings Report - This is a report that can be generated for one or all inputs which shows the archived data for a specified time period chosen by the user.

User Options - Users can see who is logged on the system.

Activity Log Report - This is a report that can be generated for one or all inputs which shows the archived activities for a specified time period chosen by the user.

Input Status - This is a menu that allows users to view the status of an input. This menu also gives a system wide summary of all inputs and has a find feature to locate individual inputs.

Input Readings Report - This report acts like a snapshot picture of all the current readings for all the inputs on the system.

Move Inputs - While this mode is activated the user can move inputs on the floor plan or between floor plans.

help Menu - This menu has a search function and key terms to help you locate what you need within the AmegaView system.

Contact Info:

Mesa Labs, Inc 12100 W. 6th Avenue

Lakewood, Colorado 80228 PH: 303-565-2724

Toll Free: 800-451-1707 monitoring@mesalabs.com