Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
build better, live better
“Our
sele
cted
cho
ice o
f hap
pine
ss”
Technical InformationEasy to install with general carpentry techniques and tools, no special skills required. Easy cutting, fixing, profiling, drilling, lining, bending, coating, and finishing with various materials
Fix with nailCut with handsaw BendPlane with jack plane
Workable with general carpentry tools and techniques
Equipment : We recommend using a cutting blade made from Tungsten Carbide or PCD Diamond cutterCoating : We recommend using polyurethane (PU) based coating such as Beger Unithane B-4000Staining : We recommend using water-based wood stain such as water-based wood stain from RothenburgLaminating : We recommend using adhesive such as 3MTM Scotch-WeldTM Cylinder Spray 94CA, or Dunlop LP. For flat lamination in production line, please contact SHERA distributor for more information of recommended adhesive solutionFixing to Wood : We recommend using water and heat resistant adhesive (D4 Grade) such as JOWAPUR 685.30 or water resistance PVAC adhesive
Easy installation with electrical woodworking tools
• Cut with circular saw
• Fix with pneumatic nailer
• Lathe with router
• Pierce with drill
Wood substitution product certified in compliance with global industry standards Raw material from certified wood FSC/PEFC
General ToleranceThickness Tolerance ASTM C1185 mm + 0.2 + 0.2Length and Width Tolerance ASTM C1185 mm + 3.0 + 3.0Edge Straightness Tolerance ASTM C1185 mm/m < 1.5 < 1.5Squareness ASTM C1185 mm/m < 2.0 < 2.0
Mechanical Properties Bulk Density ASTM C1185 kg/m3 1,200 + 50 Moisture Content ASTM C1185 % < 15% < 40%Bending Strength - Machine Direction ASTM C1185 N/mm2 > 10.0 > 8.0- Cross-Machine Direction ASTM C1185 N/mm2 > 7.0 > 5.0Modulus of Elasticity - Machine Direction ASTM C1185 N/mm2 > 6,000 > 4,000- Cross-Machine Direction ASTM C1185 N/mm2 > 2,000 > 1,500Internal Bond Strength ASTM D1037 N/mm2 > 0.80 n.a.
Thickness Swelling ASTM D1037 % < 0.15 n.a.
Building Properties Formaldehyde Content EN 717 mg/100g Not Detected Formaldehyde Content JIS A 1469 ppm Not DetectedMold Resistance ASTM D3273 Rating 10 (No mold growth)Organic Emissions ASTM D5116 Pass Fire Resistance ASTM E84 0 FSI / 0.00 Ft. / No IgnitionBS Fire Classification BS 476 : Part 5/6/7 Class “O”
PropertiesAll Size
UnitStandardAmbient Condition Wet Condition
Post-Consumer + 1/2 Pre-Consumer Recycled content > 65%If the Project is in Thailand (BKK), regional content ofSHERA ply is > 90% (Please check your project location)SHERA ply is a wood substitute product which can be usedinstead of wood-based product. Thus, the cost of using 50%FSC compliance portion can be reduced.SHERA ply is free from formaldehyde, contains low TVOC,and has mold resistant property. These qualities will helpIAQ Testing result to conform the limits.SHERA ply recommends and supplies panel adhesiveswhich have VOCs < 50 g/L less waterSHERA ply recommends and supplies water-based clearwood finishes (lacquer) which has VOCs < 550 g/LSHERA ply has no added urea-formaldehyde based adhesive
LEED for HOME Only. CIR must be submitted to claimthe score in other systems.
LEED for New Construction 2009, LEED for Commercial Interiors 2009, and LEED Core & Shell 2009
Credits Points SHERA Contribution
MR 4.1 and MR 4.2 - Recycle Content : 10 - 20%MR 5.1 and MR 5.2 - Regional Content : 10 - 20%
MR 7 - Certified Wood(FSC Wood > 50% of wood-based material)
EQ 3.2 - Construction IQA Management Plan :Before Occupancy
EQ 4.1 - Low Emission Materials Adhesive & Sealant
EQ 4.2 - Low Emission Materials Paint & Coatings
EQ 4.4 - Low Emission Materials Composite Wood &Agrifibre Products
ID SS5 - Termite and Pest Control(LEED for Home Only)
2 Points2 Points
1 Point
1 Point
1 Point
1 Point
1 Point
1 Point
www.SHERAsolution.com
Actual colors of materials may vary from pictures due to printing qualityDetails in this document are subject to change without prior notice
Version : January 2013
The Thai Olympic Fibre-Cement Co.,Ltd.2426/3 Mahaphant Building, Chareonkrung Road,Bangkorlhaem, Bangkok 10120
Living Clinic: +66 2 289 9888 F: +66 2 289 9800 E-mail: [email protected]
4 x 1220 x 2440 17.15 Interior Ceiling / Door Skin & Built-in Furniture (Frame System)
6 x 1220 x 2440 26.79 Exterior Ceiling / Built-in Furniture (Frame System)
8 x 1220 x 2440 35.72 Interior Wall Cladding / Laminate Floor Underlay / Table Top (Frame System)
10 x 1220 x 2440 44.65 Exterior Wall Cladding / Table Top (Frame System)
Plain Panel : 2-side sanded (for laminate and paint finishing)
16 x 1220 x 2440* 71.44 Table Top / Furniture Structure (Solid System)
18 x 1220 x 2440* 80.37 Table Top / Furniture Structure (Solid System)
Wooden Grain Panel : 1-side sanded (for water-based wood stain finishing)
4 x 1220 x 2440* 17.15 Interior Ceiling / Door Skin & Built-in Furniture (Frame System)
6 x 1220 x 2440* 26.79 Exterior Ceiling / Built-in Furniture (Frame System)
8 x 1220 x 2440* 35.72 Interior Wall Cladding / Laminate Floor Underlay / Table Top (Frame System)
10 x 1220 x 2440* 44.65 Exterior Wall Cladding / Table Top (Frame System)
*Made-to-order item. Please contact SHERA Distributors for more information
Plain Panel : 1-side sanded (for laminate and paint finishing)
Thickness x Width Weight Application x Length (mm.) (kg.)
Environmentally friendly becausethe ingredients are all wood andfrom wood grown in certifiedforest management underthe standard of the FSC/PEFC.
Toxin-free and environmentallyfriendly, suitable for use in LEEDUSGBC green buildings. Contributesup to 10 points of LEED credits.
Enjoy a clean living environment. SHERA ply is mold resistant. It is also free from cancer-causingformaldehyde toxins often found in furniture.
Mold resistant and suitable for wetarea furniture, passing mold resistancelevel 10 in accordance with to AmericanStandard ASTM D3273
Passes exterior grade quality inaccordance with to EuropeanStandard EN 314-3 or WBP(Weather and Boil Proof)
Enjoy comfortable living and worry-free maintenance. SHERA ply has a life-time guarantee against termites & boring insects. It is also water resistant, will not twist or swell when subjected to high humidity or water.
SHERA cares for the quality and safety of your living space. SHERA ply is f ire resistant and non-f lammable. We care for the environment. SHERA ply is manufactured from GREEN technology.
Free from formaldehyde,certified in accordance withto Japanese JIS A 1460 F****or SUPER E0 standard
Life-time guaranteed against termitesand boring insects,passing termiteresistance test in accordance with to Japanese Standard, JWPAS, 1981.14
similar to plywood, MDF, or particle board for various applications.
Offersvarious sizesfor your selection
Direct Contribution for LEED Credit Distributor
Door Ceiling
Wall
Furniture
Floor Care
Comfort
Cleanliness
Perfect insidefor your designmasterpieceHappiness comes not onlyfrom things we see, but alsofrom the unseen materialchoices we make. SHERA ply is an innovative fibre-composite panel for all interior decorative applications, including ceiling, walls and build-in furniture. It is safe and environmentally friendly product, perfect for plywood, MDF and particle board replacement in interior decoration work.
Build BetterLive Betterwith SHERA ply
Reference ProjectsCustomizeyour imagination
in any space..with every design
• Finished with water-based wood stain• Finished with high gloss spray paint
• Finished with High Pressure Laminate (HPL)• Finished with wood veneer
• Finished with wallpaper• Mounted with clear mirror
• Lathed by CNC router• Wooden grain panel
• Edge profiled by router• Finished with selected upholstery
• Finished with leather upholstery• Finished with stainless-steel sheet• Finished with melamine or PVC foil
BetterFinishing QualityPaint, Veneer and Laminate
Swelling rate = 0% Stable even against hot
water and humidity.SHERA ply is water resistant
and mold resistant.
Air pollution rate = 0% Free from pesticide and
cancer-causing formaldehyde which is often found in
common furniture production.
Inflammability rate = 0% SHERA ply is fire resistant, does not ignite, does not
burn or spread fire, and does not release toxic fumeswhen subjected to fire.
Termites and Insects ResistantLife-time guarantee against termites and boring insects
t 0%
pecoration work.
ot
a
% t, t oess
nt
Finishing and Joinery Possibility