RISO COMCOLOR FILLING INSTRUCTIONS

1. 2.

3.

4.Chip sticks in centre of area shown (circular mark in plastic surface)

BEFORE STARTING THIS REFILL PROCESS PLEASE ENSURE YOUR ARE WEARING SUITABLE EYE

PROTECTION AND GLOVES AS THE INK MAY SPLASH BACK FROM THE NOZZLE

1. The refill kit is delivered as a 1litre bottle with filling cap.

2. Clamp the top of the cartridge bag securely as you will need to put some downward pressure on it during the refilling process

3. Push the bottle nozzle tip into the middle of the cartridge cap – valve entry and slowly fill the cartridge

bag. Please note that as little air as possible should be introduced into the bag during the refilling process.

Valve entry