REVISION T Pb WITH LEAD-FREE PROCESSING THIS PRODUCT

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

THIS PRODUCT MANUFACTUREDWITH LEAD-FREE PROCESSINGPb

DO NOTSCALE FROM

THIS PRINT

(OVERALL LENGTH)XX.XX + "B" REF (SEE TABLE 3)

.738 18.75REF

(CABLE LENGTH)XX.XX 1%

REF"A"

0201 0102

N-1(SEE TABLE 2)

N(SEE TABLE 2)

STS-04(SEE NOTE 7)

SOME CENTER FEATURES ONCONNECTORS REMOVEDFOR CLARITY

N(SEE TABLE 2)

N-1(SEE TABLE 2)

HDRL-11(SEE NOTE 5)

(TOP CABLE REMOVED FOR CLARITY)

LATCH OPTION** (SEE NOTE 12) *-L: 1ST END STD LATCH, 2ND END SQUEEZE LATCH *-R: 1ST END SQUEEZE LATCH, 2ND END STD LATCH -D: BOTH ENDS STD LATCH -N: NO CAPS (BOTH ENDS HAVE STD LATCH) *-B: BOTH ENDS SQUEEZE LATCH -F: 1ST END SCREW OPTION, 2ND END FRICTION LATCH -S: 1ST END FRICTION LATCH, 2ND END SCREW OPTION -C: BOTH ENDS SCREW OPTION***-G: 1ST END SCREW OPTION, 2ND END SQUEEZE LATCH***-T: 1ST END SQUEEZE LATCH, 2ND END SCREW OPTION *-1: BOTH ENDS EXTENDED HOUSING SQUEEZE LATCH *-2: FIRST END FRICTION LATCH, 2ND END EXTENDED HOUSING SQUEEZE LATCH *-3: FIRST END EXTENDED HOUSING SQUEEZE LATCH, 2ND END, FRICTION LATCH***-4: FIRST END SCREW OPTION, 2ND END EXTENDED HOUSING SQUEEZE LATCH***-5: FIRST END EXTENDED HOUSING SQUEEZE LATCH, 2ND END SCREW OPTION

.400 10.15REF

.304 7.72REF

.542 13.76REF

SUB-ERCD-X-XXX-XX-XX-X

SUB-ERCD-X-XXX-XX-XX-X

ECD-XX-01

ECD-XX-02SUB-TCF-3450F-XX-XX-XX.XX

FRICTION LATCH

SQUEEZE LATCH

No OF POSITIONS-010, -013, -020, -025, -030, -040, -050, -060

(PER ROW)

WIRING OPTION-1: PIN 1 TO PIN 1-2: PIN 1 TO PIN 2-3: PIN 1 TO PIN N-1-4: PIN 1 TO PIN N(SEE TABLE 7, SHEET 5)

SECOND END-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR: TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET, TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL: SOCKET, BOTTOM, LEFT-TEU: TERMINAL, EDGEMOUNT, UP-TED: TERMINAL, EDGEMOUNT, DOWN

FIRST END-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR: TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET, TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL: SOCKET, BOTTOM, LEFT-TEU: TERMINAL, EDGEMOUNT, UP-TED: TERMINAL, EDGEMOUNT, DOWN

ERCD-XXX-XX.XX-XXX-XXX-X-X

LENGTH

SECOND END

FIG 1(ERCD-020-XX.XX-STL-TTR-1-D SHOWN)

FIRST END

-XX.XX (INCHES)(01.72[43.7] MIN)

(SEE NOTE 8)(SEE NOTE 9)

*OPTION ONLY AVAILABLE WITH -TEX OPTIONS (SEE NOTE 10) **LATCH OPTION REQUIRED, PART NUMBER MUST BE COMPLETE TO BE VALID***SQUEEZE LATCH TEX OPTIONS ONLY

0.8MM EDGE RATE COAX CABLE ASSEMBLY

SHEET OFBY:ERCD-XXX-XX.XX-XXX-XXX-X-XDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

J. BORGELT 1/17/08 61

SHEET SCALE: 1:1

TOLERANCES DO NOT APPLYTO REFERENCE DIMENSIONS.

.XX: .01[.3] 2

.XXX: .005[.13]

.XXXX: .0020[.051]

DECIMALS ANGLESTOLERANCES ARE:

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.

DECIMALS ANGLES

F:\DWG\MISC\MKTG\ERCD-XXX-XX.XX-XXX-XXX-X-X-MKT.SLDDRW

NOTES: 1. REPRESENTS A CRITICAL DIMENSION. 2. PARTS TO BE PROCESSED PER SAMTEC ACCEPTABILITY REQUIREMENTS: HDR-PI-01 “CABLE ASSEMBLY WORKMANSHIP STANDARDS”. 3. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED. 4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V. 5. LABEL TO BE CENTERED ON LOWER CABLE AS SHOWN. LABEL TO CONTAIN: LINE 1 - PART NUMBER “ERCD-XXX-XX.XX-XXX-XXX-X-X” LINE 2 - SHOP ORDER NUMBER “XXXXXX” LINE 3 - DATE CODE “XXXXX” 6. FOR PACKAGING REQUIREMENTS REFERENCE PACKAGING STANDARDS. 7. TIGHTEN STS-04 FASTENERS TO 1.4-1.7 IN-LBS (4 PLCS). 8. SUB-TCF LENGTH IS EQUAL TO ERCD LENGTH. 9. CABLE LENGTHS LONGER THAN 40.00 INCHES ARE NOT SUPPORTED BY S.I. TEST DATA.10. -B & -1 OPTION ONLY AVAILABLE WITH -TEX ON BOTH ENDS. -L, -2, -G & -4 OPTIONS ONLY AVAILABLE WITH -TEX ON 2ND END. -R, -3, -T & -5 OPTION ONLY AVAILABLE WITH -TEX ON FIRST END.11. ASSEMBLY COMES STANDARD WITH SQUEEZE LATCH OR FRICTION LATCH OPTIONS. FOR OTHER REQUESTS PLEASE CALL SAMTEC.12. THE RECOMMENDED MATING CONNECTOR IS THE ERF8 OR ERM8 WITH -L LATCHING OPTION

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322

REVISION T


PROPRIETARY NOTE* *

-TTR

0201

N-1N

T1

T20

T

B

-TTL

0201

N-1N

T1

T20

T

B

-TBR

0201

N-1N

B20

B1

T

B

-TBL

02

01

N-1N

B1

B20

T

B

-STR

0201

N-1N

T20

T1

B

T

-STL02

01

N-1N

T20

T1

B

T

0201

N-1N B20

B1

-SBRT

B

0201

N-1

N

B20

B1

-SBLT

B

-TED

T1

T2001

N-1

02

N

T

B

-TEU

T1

T20

01

N-1

02

N

B

T

FIRST END

CUSTOM HDR CABLE ASSEMBLY

SHEET OFBY:ERCD-XXX-XX.XX-XXX-XXX-X-X

DWG. NO.


J. BORGELT 1/17/08 62SHEET SCALE: 1:1F:\DWG\MISC\MKTG\ERCD-XXX-XX.XX-XXX-XXX-X-X-MKT.SLDDRW


REVISION T


PROPRIETARY NOTE* *

-TTR02 01

N-1N

T1

T20

B

T

-TTL

0201

N-1N

T20

T1

B

T

0201

N-1N

B1

B20

-TBRT

B

0201

N-1NB20

B1

-TBL

B

T

0201

N-1N

-STR

T20

T1

T

B

0201

N-1N

-STL

T20

T1

T

B 0201

N-1N

B20

B1

-SBR

B

T

0201

N-1N

B20

B1

-SBLT

B

-TED

T20

T1 0102

N N-1

B

T

-TEU

T20

T1

01 02

NN-1

B

T

SECOND END



DWG. NO.


J. BORGELT 1/17/08 63SHEET SCALE: 1:1



REVISION T


PROPRIETARY NOTE* *

(OVERALL LENGTH)XX.XX + "B" REF (SEE TABLE 3, SHEET 1)

REF"C"

01 02

N(SEE TABLE 2)

N-1(SEE TABLE 2)

01 02

N(SEE TABLE 2)

N-1(SEE TABLE 2)

.326 8.29REF

ECD-XX-03

SECOND ENDFIRST END

(OVERALL LENGTH)XX.XX + "D" REF (SEE TABLE 5)

.625 15.88REF

REF"E"

ADD UV EPOXYBOTH SIDES OF PCB

(ONLY FOR -N LATCH OPTION)

.271 6.87REF

.413 10.48REF

REF"F"

FIG 4(ERCD-020-XX.XX-XXX-TEU-1-N SHOWN)

.220 REF5.60

ADD UV EPOXY(ONLY FOR -N

LATCH OPTION)

LTC-16-01

DOW-0469-1250-01

"G"REF

.500 12.70REF (TYP)

(FULLYTIGHTENED)

FIG 5(ERCD-020-XX.XX-XXX-TEU-1-S SHOWN)

CPS-4-40-11-X

4-40 THREADCLASS 2A

"H"REF

.292 7.42REF

FIG 2(ERCD-020-XX.XX-TED-TEU-2-B SHOWN)

FIG 3(ERCD-020-XX.XX-STL-TTR-1-N SHOWN)



DWG. NO.





REVISION T


PROPRIETARY NOTE* *

LTC-16-01

ERH-20-03-T

ERH-20-03-B

STS-04

"J" REF(SEE TABLE 11)

XX.XX + "B" REF (SEE TABLE 3 SHT 1)(OVERALL LENGTH)

01 02

N(SEE TABLE 2)

N-1(SEE TABLE 2)

02

N(SEE TABLE 2)

N-1(SEE TABLE 2)

01

.320 8.13REF

FIG 6ERCD-020-XX.XX-TED-TEU-2-1 SHOWN

FIRST END SECOND END

LTC-16-01

"K" REF "L" REF

.129 3.28 REF(2 PLCS)

FIG 7(ERCD-020-XX.XX-STL-XXX-1-F SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

.355 9.00 REF

ECD-XX-01-SDO

0.8MM EDGE RATE COAX CABLE ASSEMBLY


DWG. NO.




REVISION T



PROPRIETARY NOTE* *

NOTE: CONNECTOR LATCHES ARE GROUND SQUEEZE LATCHES ARE NOT GROUND



DWG. NO.





REVISION T

Documents

REVISION T Pb WITH LEAD-FREE PROCESSING THIS PRODUCT