Replacement Teeth Brochure

www.JohnDeere.comDKB5022 Litho in U.S.A. (11-06)

This literature has been compiled for worldwide circulation. While general information, pictures, and descriptions are provided, some illustrations and text may include fi nance, credit, insurance, product options, and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere reserves the right to change specifi cation and design of all products described in this literature without notice.

Replacement Teeth

www.JohnDeere.com

2 3

We are now offering TK teeth with Fanggs or traditional designs in six profiles — from the TK-225 for backhoes,to the TK-250 for four-wheel-drive loaders, all the way to the TK-700 for an 870G LC Excavator.

1) Slip the TK tooth over the adapter nose;

2) Slide the Turn Kam detent pin into the nose; and

3) Rotate it ½ turn to lock it in place.

2

3

1

Put the hammer down with the TK-Series Exclusive teeth install with a single wrench

TK-Series Bucket Teeth combine the tried-and-true Fanggs™ design with hammer-free installation. This breakthrough exclusive and patented design delivers uptime through speedy installation with a simple socket wrench. And since the TK-Series is available in the trusted Fanggs design, you can expect self-cleaning durability and increased digging speed.

So put down that hammer and pick up a socket wrench — that’s all you’re going to need to install and remove TK-Series Bucket Teeth. This breakthrough design delivers durability and speedy installation.

Add TK-Series versatility, speed, and convenience to your fl eet, and watch uptime soar!

4 5

We’re big on Fanggs

Since being introduced, Fanggs continue to outperform other tooth designs in general digging applications. It’sthe self-cleaning effect that lets dirt flow between the teeth. Moldboard-shaped sidewalls decrease friction and soil compaction. All that adds up to 22-percent less digging effort to fill the bucket.

Two types of Fanggs teeth are offered for digging and loading. A Fanggs digging tooth slices through material for more productivity and less effort. The Fanggs loading tooth creates a level bucket-wear pattern due to its design.

Quality statementJohn Deere is committed to providing high-quality ground-engagement tools that result in lower daily operating costsand increased machine uptime for our customers. To ensure this requirement, all materials used for John Deere bucket teeth and adapters have been metallurgically tested to verifythey meet industry-leading impact and hardness specifica-tions. By meeting these requirements, all John Deere bucket teeth and adapters provide superior wear resistance and impact strength in all applications.

Fanggs work harder using less effort!

6 7

Tooth pocket dimensionsAt times, part number information is not always readable on a worn tooth. There are several ways to identify a design and then a specific part number.

Tooth pocket dimensionsMeasure the tooth pocket width and height, and reference the dimensions in the list below to isolate the tooth type (Caterpillar, H&L, Hensley, etc.) and series. Then look on the following pages, which include photos and part numbers, to establish the tooth needed for the application.

Tooth Pocket Width (measured in inches)

Tooth Pocket Height (measured in inches)

Replacement Section Series

113⁄32 127⁄32 Caterpillar 2011⁄2 15⁄8 H&L 2319⁄16 111⁄16 H&L —19⁄16 21⁄8 H&L 2415⁄8 15⁄8 Hensley 15615⁄8 23⁄8 Hensley 16013⁄4 211⁄32 Caterpillar 22113⁄16 11⁄2 ESCO® Conical 18115⁄16 211⁄16 Caterpillar 2521⁄16 21⁄8 H&L 2521⁄4 21⁄8 Hensley 22023⁄8 31⁄32 Caterpillar 3021⁄2 21⁄8 ESCO Conical 25211⁄16 35⁄16 Caterpillar 3527⁄8 21⁄8 H&L 2727⁄8 211⁄16 Hensley 2903 21⁄8 Hensley 3103 21⁄4 ESCO Conical 3035⁄32 321⁄32 Caterpillar 40313⁄32 33⁄16 Hensley 33031⁄2 25⁄8 ESCO Conical 3531⁄2 27⁄8 Hensley 350317⁄32 329⁄32 Caterpillar 454 27⁄8 Hensley 4004 3 ESCO Conical 4045⁄16 411⁄32 Caterpillar 5541⁄2 31⁄4 ESCO Conical 4543⁄4 31⁄2 Hensley 47547⁄8 51⁄2 Caterpillar 45 Abrasion (Standard)6 529⁄32 Caterpillar 70

Refer to applicable replacement section for specific part numbers.

8 9

TK225 SeriesStyle Description Part No.A Fanggs Tooth TK225FDB Flare Tooth TK225FRC Tiger Tooth TK225TGD Twin Tiger Tooth TK225TT

Pin TK225PLock TK3LAdapter, Weld-On TK225C100

TK250 SeriesStyle Description Part No.F Loader Tooth TK250LD

Pin TK250PLock TK3LAdapter, Bolt-On Center TK250C100BAdapter, Bolt-On End TK250E100BAdapter, Bolt-On End TK250E100B2

TK300 SeriesStyle Description Part No.A Fanggs Tooth TK300FDB Flare Tooth TK300FRC Tiger Tooth TK300TGD Twin Tiger Tooth TK300TTE Chisel Tooth TK300CHF Loader Tooth TK300LD

Pin TK300PLock TK4LAdapter, Bolt-On Center TK300C125BAdapter, Bolt-On End TK300E125BAdapter, Bolt-On End TK300E125B2Adapter, Weld-On TK300C125


Pin TK350PLock TK4LAdapter, Bolt-On Center TK350C125BAdapter, Bolt-On End TK350E125B2Adapter, Bolt-On Center TK350C150BAdapter, Bolt-On End TK350E150BAdapter, Weld-On TK350C150


Pin TK400PLock TK4LAdapter, Bolt-On Center TK400C150BAdapter, Bolt-On End TK400E150BAdapter, Weld-On Center TK400C175Adapter, Weld-On Left TK400L175Adapter, Weld-On Right TK400R175Adapter, Weld-On TK400C200

TK-Series replacement teeth

B EA FC D

10 11

John Deere “original line”replacement teethRetention The two-piece pin and split-washer design makes tooth removal and installation fast and easy. Both the pin and the washer are reusable. The original line of John Deere teeth has a nose and pocket design similar to traditional Caterpillarreplacement teeth.

The roll pin is an economical means of retaining teeth. The coil in the pin takes up manufacturing tolerances and keeps the tooth tight against the adapter.


Pin TK450PLock TK5LAdapter, Weld-On Center TK450C200Adapter, Weld-On End TK450E200

TK550 SeriesStyle Description Part No.A Fanggs Tooth TK550FDC Tiger Tooth TK550TGD Twin Tiger Tooth TK550TTE Chisel Tooth TK550CHF Loader Tooth TK550LD

Pin TK550PLock TK5LAdapter, Weld-On TK550C200Adapter, Weld-On TK550C250Adapter, Weld-On Right TK550R250Adapter, Weld-On Center TK550L250

TK600 SeriesStyle Description Part No.A Fanggs Tooth TK600FDC Tiger Tooth TK600TGD Twin Tiger Tooth TK600TTE Chisel Tooth TK600CH

Pin TK600PLock TK5LAdapter, Weld-On TK600C250

TK700 SeriesStyle Description Part No.A Fanggs Tooth TK700FDC Tiger Tooth TK700TGD Twin Tiger Tooth TK700TTE Chisel Tooth TK700CH

Pin TK700PLock TK6LAdapter, Weld-On TK700C250Adapter, Weld-On TK700C315

TK-Series replacement teeth

12 13

G

A

D

H

B

E

I

C

F

K

J

John Deere replacement teeth10 L SeriesStyle Description Part No.G Fanggs Tooth TF10LE Standard Tooth T103189F Chisel Tooth T105690

Pin, Long TF10PPin, Long T112195

F Retainer T112196 Adapter, Bolt-On Center T105692Adapter, Bolt-On Center T103190Adapter, Bolt-On Corner T103191Adapter, Bolt-On Corner T112163Adapter, Bolt-On Corner T112164

11 L SeriesStyle Description Part No.D Fanggs Tooth TF11LI Standard Tooth T29887

Pin, Long TP160LPin TP160Adapter, Bolt-On T29886Adapter, Bolt-On T35385Adapter, Bolt-On T38783Adapter, Bolt-On U16864

13 SeriesStyle Description Part No.J Fanggs Tooth TF13H Standard Tooth U13449

Pin, Long TF13PPin, Long 34M7070Adapter, Bolt-On U41344

33 L SeriesStyle Description Part No.A Fanggs Tooth TF33LA Fanggs Tooth with Carbide TF33LCC Chisel Tooth T69647B Standard Tooth T79008

Pin T9J2308 Retainer T3G9609Adapter, Bolt-On Corner T79006Adapter, Bolt-On Corner T104673Adapter, Bolt-On Corner T104674Adapter, Bolt-On Corner T123077

Please note: All part numbers featured in this brochure are subject to change.

MiscellaneousStyle Description Part No.

Left/Right Tooth T100Center Tooth T100C

14 15

Caterpillar replacement teethDesignThe oversized pocket characteristics of these teeth with the extended adapter nosepiece provide a nose fit between the tooth and adapter, which results in strong impact resistance but a loose fit in the ramps.

RetentionReplacement teeth for Caterpillar equipment use a two-piece retention method, which makes tooth removal and installation fast and easy. Both the pin and the washer are reusable. The original style and “E” style are available.

20 SeriesStyle Description Part No.B Fanggs Dig TF1U3202D D Long T1U3202J Tiger TT1U3202I Twin Tiger TX1U3202WT

Original Pin TF1U3202PE-Type Pin T8E6208Original Washer T4T0001

E-Type Washer T8E6209Flare T109-9200Adapter, Weld-On Center T8J7525

22 SeriesStyle Description Part No.D Long T6Y3222

E-Type Pin T6Y3228E-Type Washer T8E6259Adapter, Double Strap PM6Y3224

reusable. The original style and “E” style are available.

G

A

D

H

B

E

C

F

I J

K LM

25 SeriesStyle Description Part No.B Fanggs Dig TF1U3252D

Fanggs Load TF1U3252LG Abrasion T4T2253H Abrasion H-D PM9N4253C Flare T3G8250D Long T1U3252F Long H-D T9N4252E Penetrator T9J4259J Tiger TT1U3252I Twin Tiger TX1U3252WT

Original Pin T9J2258E-Type Pin T8E6258Original Washer T3G9609E-Type Washer T8E6259Adapter [2 Bolt] T1U0257Adapter, Bolt-On Left PM3G4258Adapter, Bolt-On Right PM3G4259Adapter, Double Strap PM6Y3254Adapter, Weld-On Center PM3G0169Adapter, Bolt-On Center T25CAAdapter, Bolt-On End T25EA

16 17

Caterpillar replacement teeth30 SeriesStyle Description Part No.B Fanggs Dig TF1U3302D

Fanggs Load TF1U3302LA Short T1U3301D Long T1U3302F Long H-D T9N4302

Heavy Duty with Carbide PM125-8302C Flare T107-3300J Tiger TT1U3302L Rock Chisel PM1U3302RCI Twin Tiger TX1U3302WTE Penetrator T9J4309G Abrasion T4T2303H Abrasion H-D T9N4303

Original Pin T9J2308Original Washer T3G9609Adapter Bolt-On [2 Bolt] T1U0307Adapter, Double-Strap Center T3G6304Adapter, Flush PM1U1304Adapter, Bolt-On Left PM3G4308Adapter, Bolt-On Right PM3G4309Adapter, Bolt-On Center T30CAAdapter, Bolt-On End T30EA

40 SeriesStyle Description Part No.B Fanggs Dig TF7T3402DD Long T7T3402F Long H-D T8E4402L Rock Chisel PM7T3402RC

Abrasion T7T3403RP2Abrasion, H-D T40HDALOriginal Pin T7T3408E-Type Pin T8E0468Original Washer T3G9549E-Type Washer T8E8469Original Washer T7T3409Washer T8E8409Adapter, Center T1258404Adapter, RH T1258405Adapter, LH T1258406Adapter, Corner T215303

35 SeriesStyle Description Part No.B Fanggs Dig TF1U3352D

Original Pin T9J2358E-Type Pin T8E6358

L Rock Chisel PM1U3352RCE Penetrator T9J4359A Short T1U3351D Long T1U3352F Long H-D T9N4352C Flare T107-3350J Tiger TT1U3352I Twin Tiger TX1U3352WTG Abrasion T4T2353H Abrasion H-D T9N4353

Original Washer T3G9549E-Type Washer T8E6359Adapter, Center T3G8354Adapter, Cornerguard LH PM3G5358Adapter, Cornerguard RH PM3G5359Adapter, Weld-On Flush PM1U1354

Bolt-On Adapter [2 Bolt] T3G3357Adapter, Bolt-On T3G7357

18 19

Caterpillar replacement teeth45 SeriesStyle Description Part No.B Fanggs Dig TF9W8452DJ Tiger PM1U3452TI Twin Tiger PM1U3452WTG Abrasion PM9W1453L Rock Chisel PM1U3452RCM Rock Penetrator PM9W1453RPE Penetrator T9W8459 D Long T9W8452F Long H-D T9N4452C Flare T107-3450

Original Pin T1U1458E-Type Pin T9W8559Original Washer T3G9549E-Type Washer T8E8469Adapter, Weld-On T8E6464

55 SeriesStyle Description Part No.

Tiger PM1U3552TD Long T1U3552F Long H-D PM9N4552M Rock Penetrator PM9W1553RPE Penetrator T9W8559

E-Type Pin T6Y8558 Original Pin T1U1558Original Washer T3G9559E-Type Washer T8E5559Adapter, Double-Strap Center PM3G9494Adapter, Double-Strap PM1U1553


Pin T6I6608Washer T6I6609

Hensley replacement teethDesignThe parabolic (dished-out) design creates a wedging and self-tightening fit. A recessed channel on the inside side- wall of the tooth matches a tapered extension on the adapter nosepiece, forming a locking fit. The design absorbs impact loads.

RetentionA roll pin is used on the 156, 160, 220, and 310 Series. Smaller series teeth are retained with a vertical roll pin, allowing easy removal and installation. The 350, 400, and 475 Series use a vertical flex pin made of two hardened steel forgings with vulcanized neoprene between. The flex pin provides a four-way locking support. A steel key retains the 290, 330, 370, 410, 500, and 550 Series. This key pro-vides outstanding retention in all types of applications. It is not reusable.

20 21

Hensley replacement teeth156 Series (Top Mount)Style Description Part No.A Fanggs Dig TF156B Standard TX156D Tiger TT156

Tiger H-D PMT156HDTwin Tiger Long PMX156WTL

C Flare PMX156FHeavy Duty PMS156HDHeavy PMX156HExtra Long PMX156LPLong PMX156L

E Twin Tiger TX156WTPin TF13PPin TP156Adapter, Weld-On T230X156Adapter, Weld-On PM681X156Adapter, Weld-On T834X156Adapter, Weld-On T116X156

E

B

D

A

C

F

160 Series (Top Mount)Style Description Part No.A Fanggs Dig TF160B Standard TX160C Flare TX160FD Tiger TT160E Twin Tiger TX160WT

Pin TP160Adapter, Weld-On T658X160

220 Series (Top Mount)Style Description Part No.A Fanggs Dig TF220

Tiger Long PMT220LAbrasion PMX220ABR

F Abrasion TX220APStar PMS220

B Standard TX220C Flare TX220FD Tiger TT220E Twin Tiger TX220WT

Pin TP160Adapter, Weld-On T109X220

225 Series (Top Mount)Style Description Part No.D Tiger PMT225B Standard PMX225F Abrasion Paneled PMX225AP

Abrasion PMX225ABRFlex Pin PMP225

290 Series (Top Mount)Style Description Part No.A Fanggs Dig TF290B Standard TX290C Flare TX290FD Tiger TT290E Twin Tiger TX290WTF Abrasion TX290AP

Flex Pin PMP290Steel Pin TK290Adapter, Weld-On T158X290Adapter, Weld-On T127X290

22 23

Hensley replacement teeth295 Series (Top Mount)Style Description Part No.B Standard PM295D Tiger PMT295E Twin Tiger PM295WTF Abrasion PM295AP

Steel Pin PMP295

300 Series (Top Mount)Style Description Part No.E Twin Tiger PMX300WT

Flex Pin, 4-Tab PMP300B

310 Series (Top Mount)Style Description Part No.A Fanggs Dig TF310B Standard TX310C Flare TX310FD Tiger TT310E Twin Tiger TX310WTF Abrasion TX310AP

Weld-On T153X310Pin TP160LPin TP160Adapter PM136X310

330 Series (Top Mount)Style Description Part No.A Fanggs Dig TF330 B Standard TX330C Flare TX330FD Tiger TT330E Twin Tiger TX330WTF Abrasion TX330AP

Weld-On T158X330Sharp, Ribbed PMX330SYL

Short Rock PMX330SRSteel Pin TK330Flex Pin PMP330Adapter, Stake-On PM136X310

350 Series (Top Mount)Style Description Part No.C Flare PMX350F

Pin TP400HD

370 Series (Top Mount)Style Description Part No.A Fanggs Dig TF370C Flare PMX370FB Standard TX370D Tiger TT370E Twin Tiger TX370WT

Pin TK370Adapter, Weld-On PM158X370Adapter, Weld-On T940X370

335 Series (Top Mount)Style Description Part No.B Standard PM335C Flare PM335FD Tiger PMT335E Twin Tiger PM335WT

Steel Pin PMP335Pin, Steel Spring PMP335SL

385 Series (Top Mount)Style Description Part No.B Standard PM385C Flare PM385FD Tiger PMT385E Twin Tiger PM385WT

Steel Pin PMP385Pin, Steel Spring PMP385SL

24 25

Hensley replacement teeth400 Series (Top Mount)Style Description Part No.A Fanggs Dig TF400F Abrasion PMX400ABR

Abrasion Heavy PMX400ABRBPenetrator Narrow PMX400SD

B Standard TX400C Flare TX400FD Tiger TT400E Twin Tiger TX400WTF Abrasion TX400AP

Pin TP400HDAdapter, Weld-On T802X400

410 Series (Top Mount)Style Description Part No.A Fanggs Dig TF410B Standard TX410C Flare PMX410FD Tiger TT410E Twin Tiger TX410WT Pin TK410

Adapter, Weld-On T940X410

450 Series (Top Mount)Style Description Part No.D Tiger PMT450B Standard PMX450C Flare PMX450FE Twin Tiger PMX450WT

Flex Pin TP450

475 Series (Top Mount)Style Description Part No.A Fanggs Dig TF475B Standard TX475

Tiger Long PMT475LC Flare TX475FD Tiger TT475E Twin Tiger TX475WT

Flex Pin TP475HDAdapter, Weld-On T303X475

500 Series (Top Mount)Style Description Part No.A Standard TX500D Tiger TT500E Twin Tiger TX500WTF Abrasion TX500AP Flex Pin TP500

Steel Key Pin TK500RAdapter, Weld-On T806X500

550 Series (Top Mount)Style Description Part No. Steel Key Pin PMK550R

Hensley Specialty Bucket Wear Parts300 SeriesStyle Description Part No.

Tooth, RH PM300RHTooth, LH PM300LHTooth, Center PM300CHX


Tooth, RH PM400RHTooth, LH PM400LHTooth, Center PM400CHX

26 27

H&L replacement teethDesignH&L-style teeth are designed for backhoes and excavators. They are available in a multitude of shapes offering superb performance and reliability in all digging conditions.

RetentionThe H&L tooth is attached with a horizontal flex pin. The flex pin consists of two steel pin halves with rubber sand-wiched between. This pin design withstands shock and can take up small amounts of adapter wear in order to provide the necessary tight fit between tooth and adapter.

A

D

B EC

FG H I

3 SeriesStyle Description Part No.E Long T3CR

Long PM3CHXLF Flare T3CF

Standard PMT3CAdapter T716X3CStandard T3C

23 SeriesStyle Description Part No.H Fanggs Dig TF23DI Fanggs Load TF23L

Standard T230SPStandard T23C

B Tiger TT230LA Twin Tiger T230WTLF Flare T230FF Flare PM23HXFC Star T230STE Long Rock, Fabricated T23R

Swamper, Tooth T230SWPRPin T23PPin PM23PBPin PM23PCPin PM23PDPin TF23PAdapter, Weld-On PM230010Adapter, Weld-On Flush PM2300FLAdapter, Weld-On T417X230Adapter, Weld-On T728X230Adapter, Weld-On PMD834-23HXAdapter, Weld-On U43792Adapter T875X230Adapter, Bolt-On T221X230Adapter, Weld-On T625X230Adapter, Weld-On T750X230Adapter, Weld-On, Center T760X230Adapter, Weld-On, End T760X230E


Standard T2AE Long T2AR

Adapter T716X2AAdapter T252X2A

28 29

H&L replacement teeth24 SeriesStyle Description Part No.

Standard T240C Star PMS240B Tiger TT240A Twin Tiger T240WTG Long PM24SPHXF Flare, 4-in. PM24HXF

Pin T24PPin PM24PBHXAdapter, Weld-On T427X240

25 SeriesStyle Description Part No.H Fanggs Dig TF252

Standard T252F Flare, 5-in. T252FC Star T252STA Twin Tiger PM250TWG Long PM251HX

Pin TF25P Pin T25POversize Pin PM25/26PDAdapter, Weld-On PM2500150Adapter, Weld-On T440X252


Standard T260Standard PM26HX

B Tiger PMT26Pin T25POversize Pin PM25/26PD


Standard T270SPStandard PM271HX

F Flare, 7-in. PM27HXFB Tiger PMT27

Pin T27P

DeereStyle Description Part No.D Ripper Tooth U15517

Scarifier Tooth T6Y5230Shank T66192Lock U17204Leaf Spring U40130Ripper Shank T211749Scarifier Shank T114792Scarifier Tooth T034Pin, Groove U15522Adapter, Bolt-On for Scraper Edge U16087

CatStyle Description Part No.C Standard T6Y5230E Long T1U3202

Long T6Y0359 Retainer T8E6209Retainer T8E6259

F Penetration T9J4259Penetration PM4T5452

F Long/Penetration T6Y0309Intermediate T9W2452Short T9W2451Pin T9W2668 Pin T8E6258Pin T8E6358Pin T8E6208Pin PM4T2479Pin PM3G0500Washer T8E6359Shank Guard T8E1848Shank Tip T8E8418Scarifier Shank T9F5124Penetration T9J8920Standard T1140453

Ripper/scarifier replacement teeth

30 31

H&L 18, 20, 21, 22, and 23 SeriesStyle Description Part No.B Standard, Crimp-On T1L

Standard T260Standard Pin T25PStandard PM20HXSRipper, Standard PM18HXRipper, Standard PM21HXRipper, Standard PM22HX

MiscellaneousStyle Description Part No.

Side Cutter T1156ASide Cutter T1157AGrapple Tooth T151947

Ripper/scarifier replacement teeth

A

D

B

CE

F

ESCO 22, 25, 35, and 39 SeriesStyle Description Part No. Ripper PM22R10HX

Bushing PM22RBGBA Standard EX25R12

Bushing EX25RBGRipper PM25R11HXRipper PM25R12HX

A Ripper T356R15Ripper, Nose PM25RNHXRipper 14 PM35R14HXRipper 15 PM35R15HXPin EX25RPGPin PM22RPGPRipper Tooth T35-5R15Ripper Shroud T35-5RSLBRipper Tooth T35R14Ripper Tooth T35R16Retainer, Bushing T35RBSSpacer, Ring T35RLKSRPin EX35RPGShank Guard T356RSLShank Tip T356RWNSRipper Nose, Weld-On T35RNSEFRipper Nose, Weld-On T35RNSPF

32 33

ESCO conical replacement teethDesignThe “conical design” mating system between tooth and adapter creates self-tightening action. The raised center area on the top and bottom of the adapter nosepiece fits tightly into the formed area on the top and bottom of the tooth pocket. The design reduces tooth movement both vertically and horizontally. This design absorbs impact loads.

RetentionAll Deere replacement teeth for ESCO conical products are retained with a pin and lock. Once the pin and lock are installed, a snug fit gives this attaching system little to no movement and provides great strength throughout the life of the tooth. Pins and locks are available in the standard and ratchet versions. The ratchet style should be used in demanding conditions.

A

D

B

C

18 Series ConicalStyle Description Part No.A Sharp PM18SLHXB Tiger PM18VIPHXC Twin Tiger PM18TVIPHX

Long PM18TLStandard Retainer PM18LKRubber Lock PM18-20MLKRLong PM18LPHXStandard Pin PM18PNPin PM18-20MPNP Adapter PM833-18

25 Series ConicalStyle Description Part No.A Sharp T25SB Tiger T25VIPC Twin Tiger T25TVIPD D-P Flare PM25TF

Standard Pin T2530PNRatchet Pin T2530PNRStandard Retainer T2530LKRatchet Retainer T2530LKRAdapter, Weld-On PM855-25Adapter, Weld-On PM3806-25

34 35

ESCO conical replacement teeth30 Series ConicalStyle Description Part No.A Sharp T30SB Tiger T30VIPC Twin Tiger T30TVIPD Flare, 6-in. T30S6F

Standard Pin T2530PNRatchet Pin T2530PNRStandard Retainer T2530LKRatchet Retainer T2530LKR Adapter, Weld-On PM3807-30Adapter, Weld-On 4606717

35 Series ConicalStyle Description Part No.A Sharp T35SB Tiger T35VIPAC Twin Tiger T35TVIPAD Flare, 6-in. T35S6F

Standard Pin T35PNRatchet Pin T35PNRStandard Retainer T3540LKRatchet Retainer T3540LKRAdapter, Horn-Style EX119-35Adapter, Weld-On PM3808-35

40 Series ConicalStyle Description Part No.A Sharp T40SB Tiger T40VIPAC Twin Tiger T40TVIPD Flare, 7-in. T40S7F

Ratchet Pin T40PNRStandard Pin T40PNStandard Retainer T3540LKRatchet Retainer T3540LKRAdapter, Weld-On PM3809-40Adapter, Weld-On 4187941Adapter, Weld-On 4045168

45 Series ConicalStyle Description Part No.A Sharp T45SB Tiger T45VIPAC Twin Tiger T45TVIP

Standard Pin T45PNRatchet Pin T45PNRStandard Retainer T45LKRatchet Retainer T45LKRAdapter, Weld-On 4613845

50 Series ConicalStyle Description Part No.C Twin Tiger PM50TVIPHX

Rubber Lock PM50LKRPin PM50PNP

46 Series Super ConicalStyle Description Part No.B Tiger PM46VIPHXD Flared Panel PM46FPHX

Lock PM46LKRPin PM46PNP

36 37

Helilok® /Vertalok® replacement teethDesignHelilok/Vertalok teeth mount on both the Vertalok and Helilok adapters with a quarter turn and “butt” up against the adapter nose to take thrust loads head-on. The helical threads and large stabilizing flats at the end of the nose deliver maximum resistance to severe breakout forces.

RetentionTeeth are held on to Helilok adapters by a drive-on, one-pieceQuadrilok™ retainer (reusable). With the Quadrilok, the heli-cal threads create a locknut force that tightens under load and resists rotation under the most severe impact.

Teeth are securely fastened to Vertalok adapters with a drive-through pin, which provides maximum holding power and virtually eliminates tooth loss. The pin is held in place by a spring-loaded plug that fits snugly into a cavity in the side of the adapter nose. Both are reusable.

A

D

B C

E F

21 SeriesStyle Description Part No.A Standard EX21SYLB Tiger EX21VIPC Twin Tiger EX21TVIPD Flare, 5-in. EX21S5F

Quadrilok EX21LKSAdapter, Weld-On, Helilok EX5854-21Adapter, Weld-On, Helilok EX5849-21Adapter EX5759-21

17 SeriesStyle Description Part No.A Standard EX17TL

27 SeriesStyle Description Part No.A Standard EX27SYLB Tiger EX27VIPC Twin Tiger EX27TVIPD Flare, 6-in. EX27S6FE Chisel EX27SDF H-D Sharp EX27S

Quadrilok EX27LKSPlug EX27VPLPin EX27VPN Adapter, Weld-On, Helilok EX5827-27Adapter, Weld-On, Vertalok EX5850-27VAdapter, Pin-On EX119-27V

37 SeriesStyle Description Part No.A Standard EX37SYLB Tiger, Non-Centerline EX37VIPC Twin Tiger EX37TVIPD Flare, 7-in. EX37S7FE Chisel EX37SDF H-D Sharp EX37SH

Abrasion EX37ARLTiger, Centerline EX37VXQuadrilok EX37LKSPlug EX37VPLPin EX37VPNPin & Plug Kit 37V/KITAdapter, Horn-Style, Helilok EX129A-37Adapter, Weld-On, Helilok EX5824-37

38 39

Helilok/Vertalok replacement teeth47 SeriesStyle Description Part No.A Standard EX47SYLB Tiger EX47VIPC Twin Tiger EX47TVIPD Flare, 9-in. EX47S9FE Chisel EX47SDF H-D Sharp EX47SH

Abrasion EX47ARLQuadrilok EX47LKSPlug EX47VPLPin EX47VPNAdapter, Weld-On, Helilok EX1829A-47Adapter, Weld-On, Vertalok EX5857-47V

57 SeriesStyle Description Part No.A Standard EX57SYLB Tiger EX57VIPC Twin Tiger EX57TVIP

Abrasion, Non-Centerline EX57ARLAbrasion, Centerline EX57LP

E Chisel EX57SDRock EX57RPlug EX57VPLQuadrilok EX57LKSPin EX57VPN Pin & Plug Kit 57V/KITAdapter, Weld-On, Vertalok EX1856A-57V


Plug EX61VPLAPin EX61VPNA

67 SeriesStyle Description Part No.A Standard EX67RL

Tiger 67VYPlug EX67VPLPin EX67VPN

Quadrilok Removal ToolsStyle Description Part No.

Tool, 21–27 Series EX21-27QRTTool, 37–47–57 Series EX3-4-57QRT

40 41

Super V® replacement teethDesignThe Super V tooth design provides a slimmer profile for increased penetration, better loading, reduced fuel con-sumption, and lower maintenance requirements. Broad stabilizing flats and a large load-bearing area reduce the chance for breakage and tooth loss. The tooth twists a quarter turn onto the adapter and “butts up” against the adapter nose to match breakout forces more closely.

RetentionA vertical one-piece pin provides a quick and safe tooth change-out. The unique pin design delivers a positive andsecure lock, yet is easily installed or removed. The pin locksto the point ear independent of the nose and is fully coveredby the point ear for reduced wear.

C

A

B

D

19 SeriesStyle Description Part No.A Standard, Long EV19SYLB Tiger EV19VYC Twin Tiger EV19TVYD Flare EV19TF

Standard EV19TYPin EV23PNAdapter EV5854-V19Adapter, Flush-Mount EV8806V19

23 SeriesStyle Description Part No.A Standard EV23SYLB Tiger EV23VYC Twin Tiger EV23TVYD Flare EV23S5F

Pin EV23PN Adapter EV5849-V23Adapter, Flush-Mount EV8830V23


Point, Rock EV29SDXTiger, H-D EV29VYHTwin Tiger, H-D EV29TVYHPenetration Abrasion V29SHVAbrasion EV29ARPin EV29PN Adapter EV5850-V29


Point, Super V EV33SDXAbrasion Rock EV33ARPin EV33PNAdapter EV5855-V33

17 SeriesStyle Description Part No.A Standard EV17TYL

Pin EV13-17PNAdapter, Weld-On EV833V17Adapter, Weld-On EV8841V17Adapter, Weld-On EV8806V17Adapter, Weld-On EV8842V17

42 43

Super V replacement teeth39 SeriesStyle Description Part No.A Standard EV39SYLB Tiger EV39VYC Twin Tiger EV39TVYD Flare EV39S8F

Penetration Abrasion, Centerline V39SHVPenetration Abrasion, Non-Centerline EV39ADAbrasion Rock, Non-Centerline EV39ARPoint, Rock EV39SDXPin EV39PNAdapter EV5856-V39Adapter, Bolt-On EV7712V39Adapter, Bolt-On EV7711V39RAdapter, Bolt-On EV7711V39L

43 Series Style Description Part No.A Standard, Long EV43SYLB Tiger EV43VYC Twin Tiger EV43TVYD Flare EV43S9F Point, Rock EV43SDX

Tiger, H-D EV43VYHTwin Tiger, H-D EV43TVYHPenetration Abrasion, Centerline V43SHVPenetration Abrasion, Non-Centerline EV43ADStandard EV43TYLPin EV43PN Adapter EV5856-V43Adapter, Horn Style EV129AV43Adapter, Weld-On Nose EVWNV43Adapter, Weld-On EV1836V43Adapter, Weld-On EV1829BV43

51 SeriesStyle Description Part No.A Standard EV51SYLB Tiger EV51VY

Standard Rock EV51RYLC Twin Tiger EV51TVYD Flare EV51S10F

Tiger, H-D EV51VYHTwin Tiger, H-D EV51TVYHAbrasion Rock Heavy EV51ARHAbrasion Rock EV51ARAbrasion Penetration EV51ADChisel, H-D EV51SDXPin EV51PNPin, Hot Slag EV51HPNAdapter EV5857A-V51

59 SeriesStyle Description Part No.A Standard EV59SYL

Abrasion Penetration EV59ADChisel, H-D EV59SDX

C Twin Tiger EV59TVYB Tiger EV59VY

Pin EV59PNAdapter EV8845-V59Adapter EV3858V59Adapter EV5857AV59


Impact Abrasion EV61RY Abrasion Rock Long EV61ARLChisel EV61SD

C Twin Tiger EV61TVP B Tiger EV61VX

Pin EV61PNAAdapter EV5839V61Adapter EV5898-V61

44 45

ESCO Ultralok®

DesignThe Ultralok tooth and adapter design provide improved penetration through smooth adapter to tooth point tran-sitions and all-new, streamlined profile shapes. A unique triangular nose shape provides stabilized mating flats to absorb load.

RetentionThe Ultralok system is hammerless — integrating the lock-ing mechanism into the tooth point. The integrated locking device makes the Ultralok system two pieces, unlike a tradi-tional three piece (tooth, pin, adapter) system. The system is locked and unlocked using a pry bar. The placement of the lock reduces wear and loading of the locking mechanism.

BA

ED

C

Super V replacement teeth69 SeriesStyle Description Part No.A Standard EV69SYL

Standard Rock EV69RYLAdapter EV3858V69

B Tiger EV69VXAbrasion Rock Long EV69ARLPin EV69PNPin, Hot Slag EV69HPNAAdapter EV5898V69


Standard Rock EV71RYL B Tiger EV71VX

Chisel EV71SDPin EV71PN Adapter EV5897-V71


Standard Rock EV81RYLB Tiger EV81VX

Chisel EV81SD Pin EV81PN

46 47

U40 SeriesStyle Description Part No.A Chisel EU40CB Standard EU40SC Flare EU40FD Twin Tiger EU40TE Tiger EU40P

Adapter E5856U40Adapter E3810BU40

U45 SeriesStyle Description Part No.A Chisel EU45SB Standard EU45PC Flare EU45TD Twin Tiger EU45FE Tiger EU45C

Adapter E5856U45


Adapter E5857AU55Adapter E8801AU55Adapter E3811AU55Adapter E3858AU55


Adapter EU8845AU60Adapter EU5898AU60


Adapter E5849U25Adapter E5854U25




Adapter E5855U35Adapter E3810BU35

ESCO UltralokU20 SeriesStyle Description Part No.A Chisel EU20CB Standard EU20SC Flare EU20FD Twin Tiger EU20TE Tiger EU20P


Documents

Replacement Teeth Brochure