SASKATCHEWANOctober 17-18, 2019

Saskatchewan Polytechnic

Parkway Building

4635 Wascana Pkwy,

Regina, SK S4P 3A3

Park in Lots W14 & W15. Tickets available for purchase from machines in parking lots.

#SASKBIM19

REGIONAL SESSIONExploring Beyond BIM

Register

The Saskatchewan Regional Session will offer educational and informative Technology Sessions, that will dive deeper into new technologies and processes that will assist architects, engineers, contractors, consultants and owners in their day to day activities and processes. All practitioners looking to develop their knowledge around how the technology works, “tips and tricks” and new methodologies should attend these Technology Sessions.

From legal perspectives on BIM to learning about digitizing vertical (buildings) and horizontal (civil) infrastructure projects, to learning about digital collaboration strategies, and going beyond 3D modeling/Building Information based Models; this session will offer a wide range of topics for professionals at all stages of the learning curve. We look forward to seeing you all in Regina!

Supporting Event Sponsors

Sponsor

CanBIM Project Site Tour*Limited seating available. Must register online.3:00PM - 4:45PM

University of Regina College Avenue Campus (includes College Building and Darke Hall)

The College Avenue Campus (CAC) is a designated Heritage Property comprised of two buildings: Darke

Hall and the College Building. Located on College Avenue in Regina, it is the site of the original Methodist

College since re-purposed and incorporated into the University of Regina. BIM was utilized to document

existing conditions, identify and solve design problems, develop construction documents, execute

contract administration, and address challenges encountered during construction. The tour will explore

College Avenue Campus with a special presentation on the design and heritage of CAC, as well as some

of the design and construction challenges that were solved utilizing BIM.

CanBIM Meet & Greet*Limited seating available. Free to attend if registered for the Tour or Day 2. Must register online in advance.

6:00PM - 8:00PM

DAY ONEOctober 17, 2019

Project Site Tour and Meet & Greet

MEMBERS Day 2 $250Meets & Eats $100

NON-MEMBERS Day 2 $300Meets & Eats $125

STUDENTS & FACULTYDay 2 $45Meets & Eats $100

CORP GROUPSDay 2 $225Meets & Eats $125

SCHOOL GROUPSDay 2 $40Meets & Eats $100

Event Fees

DAY TWOOctober 18, 2019

Technology Sessions, Executive Speaker Series & “Meets & Eats” Dinner

Event Registration & Technology Exhibition Opens

CanBIM Welcome Address

Keynote: Legal Landscape of BIM, Andrea Lee, Partner, Glaholt LLP

Bridging the Divide – Old Meets New at College Avenue Campus, Kate Jackson, Intern Architect, P3Architecture Partnership, Nitish Joshi, Architectural Technologist, P3Architecture Partnership, and Amber Burt, Architectural Technologist, P3Architecture Partnership

NETWORKING BREAK

MORNING CONCURRENT SESSIONSAre We BIM-ing Yet?, Carl Storms, Solutions Consultant, IMAGINiT Technologies

BIM Execution - Planning for Change, Rodway Jung, Associate, Architectural Technologist, Stantec Architecture Ltd.

Digitizing Horizontal Infrastructure: Leveraging Model Intelligence in Bridge Design, Drew Teal, M.Sc., P.Eng, LEED AP, Structural Engineer, Associated Engineering

LUNCH

CanBIM Certification Update & Ceremony

AFTERNOON CONCURRENT SESSIONSCollaboration Strategies: Tools, Methods and Processes , Amanda Comunale, Director of Virtual Design and Construction, Victaulic

Empowered by Your Information, Brent Mauti, Global Director - Design Technology, Architect, IBI Group

We ARE BIM’ing...Now What? BIM: More Than 3D Modeling, Yigit Karanfil, Design Technology Specialist, DIALOG

NETWORKING BREAK

Panel Discussion - Saskatchewan: Exploring Beyond BIM

Closing Remarks

CLOSING RECEPTION

CanBIM “Meets & Eats” Dinner

7:30AM

8:30AM-8:40AM

8:40AM-9:10AM

9:10AM-9:45AM

9:45AM-10:30AM

10:30AM-12:00PM

10:30AM-12:00PM

10:30AM-12:00PM

12:00PM-1:15PM

1:15PM-1:40PM

1:40PM-3:10PM

1:40PM-3:10PM

1:40PM-3:10PM

3:10PM-3:40PM

3:40PM-4:40PM

4:40PM-4:50PM

4:50PM-6:00PM

6:30PM-8:30PM

Attendees will be able to select only ONE (1) of the THREE (3) Morning Sessions.

Technology Session 1A Are we BIM-ing Yet?Presenter: Carl Storms, Solutions Consultant, IMAGINiT Technologies

Session Summary: Are you looking to sharpen your understanding of what BIM is, or review how BIM can benefit your company? This workshop aims to provide a better understanding of the basics of BIM, then will move into practical concepts and workflows that have been proven effective globally. Some key issues this workshop will cover are: Are you really doing BIM?, BIM Fundamentals, and BIM Roles and Responsibilities.

Technology Session 1B BIM Execution - Planning for ChangePresenter: Rodway Jung, Associate, Architectural Technologist, Stantec Architecture Ltd.

Session Summary: This presentation will tell the BIM story of a variety of interesting projects of different sizes and scopes, and we will review the BIM process we developed and executed through them. Each project tells it’s own story of successes and hardships, and we will focus on some of the issues we have come across during these projects. We will review our solution and discuss the successes and partial successes of our choices.

We will review projects of many different contract models including Design - Bid - Build, Design Build, P3, and ILPD. All successful projects require a degree of flexibility and revision in the BIM Execution planning, but this is often overseen, and the Execution Plan is often seen as ‘set in stone’, and this practice needs to change. In review of the projects we will review how our plans required quick and effective change when owner requirements or project needs demanded change.

Technology Session 1C Digitizing Horizontal Infrastructure: Leveraging Model Intelligence in Bridge DesignPresenter: Drew Teal, M.Sc., P.Eng, LEED AP, Structural Engineer, Associated Engineering

Session Summary: Employing BIM and 3D modeling techniques in bridge design can be very helpful in understanding and addressing geometric challenges that are unique to transportation structures. By leveraging intelligent modeling tools, the BIM/3D model can become a data rich model that aids in the detailed design process and construction documentation production. This presentation will review examples of using data and modeling techniques for going beyond 3D geometry when modeling bridges and other transportation structures.

DAY TWOOctober 18, 2019

Morning Sessions10:30AM - 12:00PM

DAY TWOOctober 18, 2019

Attendees will be able to select only ONE (1) of the THREE (3) Afternoon Sessions.

Technology Session 2A Collaboration Strategies: Tools, Methods and Processes Presenter: Amanda Comunale, Director of Virtual Design and Construction, Victaulic

Session Summary: For the last 100 years, Victaulic has been, and continues to be, an innovator and leader in the construction industry. As a lean manufacturer, Victaulic is implementing its lean processes into job-site construction. Learn how Victaulic takes IFC documents and creates a fabricatible model that starts with full Revit Integration creating fab maps, isometric spool drawings and coordinates deliverables to the job-site. Through this process we are able to coordinate material logistics and ensure project schedule certainty.

We will walk you through the tools that are used, methods, and processes that have worked to provide full coordination and Just-In-Time delivery.

Technology Session 2B Empowered by Your InformationPresenter: Brent Mauti, Global Director - Design Technology, Architect, IBI Group

Session Summary: IBI Group would like to present a solution that connects a BIM to an Asset Management System as well as to our construction review process. One case study is focused on our office expansion where the assets within the design model were cataloged and connected to a custom-built asset management system. The workflow harnesses OpenBIM technology, allowing the end user to experience a virtual representation of the asset via mobile devices as well as a medium to socially interact with them. This data contains fused design information with records for maintenance, along with social information identifying repair / replacements which can feed subsequent projects.

Technology Session 2CWe ARE BIM’ing...Now What? BIM: More Than 3D ModelingPresenter: Yigit Karanfil, Design Technology Manager, HOK Architects

Session Summary: This presentation is a high level overview of the history, current status, and future of BIM.We will be exploring what BIM can offer today, the challenges the industry is facing, and possible solutions to these challenges. The presentation will include examples of what can be achieved with BIM today and how to get the most value out of BIM models. We will wrap up by mentioning emerging technologies in the industry and possible future trends.

Afternoon Sessions1:40PM - 3:10PM

Keynote Presentation8:40AM-9:10AMLegal Landscape of BIM, Andrea Lee, Partner, Glaholt LLP

There is a common perception in the design and construction industry that use of BIM technology, while having many benefits, may lead to greater uncertainty and liability. Those who are proponents of the innovative tool often do not themselves use project agreements which reflect the use of BIM, model management, sharing and storage of data or cybersecurity risks. This presentation will focus on the legal aspects of BIM. It will include a review of good contracting practices from around the world, risk management strategies and BIM related litigation, and will leave attendees with a better understanding of these legal issues.

Panel Discussion3:40PM-4:40PMSaskatchewan: Exploring Beyond BIM

ModeratorBill Moore, Technical Services Production Manager, Associated Engineering & President, buildingSMART Canada

PanelistsDerek Blayney, P. Eng, General Manager, Baggage and Civil Construction and Infrastructure, The Calgary Airport AuthorityYuri Bartzis, Virtual Design and Construction (VDC) Regional Manager, PomerleauBruce McCallum, Principal, Next ArchitectureChris Little, Virtual Coordination Manager, Modern Niagara

Closing Reception4:50PM-6:00PMSponsored by CanBIM Platinum Sponsors

Join us for a beverage and some hors d’oeuvres.

“Meets & Eats” Dinner *Must register online in advance, limited seating available. 6:30PM-8:30PM Event attendees will have the chance to sit down and break bread with technology leaders. Executive “Meets & Eats” are an Intimate, exclusive and curated opportunity to build your network.

Keynote, Panel Discussion & “Meets & Eats” Dinner

DAY TWOOctober 18, 2019

Technology ExhibitionFirst Floor Foyer(Open to all registrants)

7:30AM-5:00PM

The CanBIM Technology Exhibition showcases the latest innovative technologies from industry leading technology companies. A great business opportunity to connect with the AECOO industry professionals.

Exhibitor Package Includes (per event)

Two (2) Event Registrations per event • Exhibitor Profile on CanBIM Mobile Event App• Exhibitor Logo Placement on main event screen during breaks • Exhibitor Table - 3X6 table with two chairs • Attendee List

Exhibitor Package Does Not Include:• Power Access• AV Equipment• Table Linens• Parking• WiFi

Exhibitor Package Fees*plus applicable taxesCanBIM Member Price: $750Non-Member Price: $1000

DAY TWOOctober 18, 2019

Technology Exhibition

PLATINUM

SILVER

BRONZE

CORPORATE

GOLD

ANNUAL SPONSORS