References

1. Abair, R.A. (1995), "Agile manufacturing: This is not just rqjackaging of material requirements planning and just-in-time", Annual International Conference Proceedings - American Production and Inventory Control Society, pp. 196-198.

2. Abair, R.A. (1997), "Agile manufacturing: successful implementation strategies". Annual International Conference Proceedings, American Production and Inventory Control Society, pp. 218-219.

3. Abdelaziz, F.B., Aouni, B. and Fayedh, R.E. (2007), "Multi-objective stochastic programming for portfolio selection", European Journal of Operational Research, Vol. 177, pp.1811-1823.

4. Abdel-Kader, M.G. and Dugdale, D. (2001), "Evaluating investments in advanced manufacturing technology: a fiizzy set theory approach", British Accounting Review, Vol. 33, pp. 455-489.

5. Abdel-Malik, L., Das, S.K. and Wolf, C. (2000), " Design and implementation of flexible manufacturing solutions in agile enterprises". International Journal of Agile Management Systems, Vol. 2, No. 3, pp. 187-195.

6. Agarwal, A. and Shankar, R. (2002), "Analyzing alternatives for improvement in supply chain performance". Work Study, Vol. 51, No. 1, pp. 32- 37.

7. Agarwal, A. and Shankar, R. (2003), "On-line trust building in e-enabled supply chain", Supply Chain Management: An International Journal, Vol. 8, No. 4, pp. 324-334.

8. Agarwal, A., Shankar, R. and Tiwari, M.K. (2006), "Modeling the metrics of lean, agile and leagile supply chain: An ANP-based approach, European Journal of Operational Research, Vol. 173, No. 1, and pp. 211-225.

9. Agarwal, A. (2005), "Study of select issues in agility and integration of supply chains", PhD thesis, Indian Institute of Technology, Delhi.

10. Agbasi, E., Anumba, C, Gibb, A., Kalian, A. and Watson, A. (2004), "Cladding sector road map for realising the CIM vision", Industrial Management & Data Systems, Vol. 104, No. 6, pp. 526-532.

11. Aghazadeh, S.M. (2003), "MRP contributes to a company's profitability". Assembly Automation, Vol. 23, No. 3, pp. 257-265.

247

12. Ahem, A. and Anandarajah, G. (2007), "Railway projects prioritisation for investment: Application of goal programming". Transport Policy, Vol. 14, pp. 70-80.

13. Ainscough, M. and Yazdani, B. (2000), "Concurrent engineering within British industry". Concurrent Engineering: Research and applications, Vol. 8, No. 1, pp. 2-11.

14. Aitken, J.M. (1999), "Supplier Associations: A methodological opportunity in supply chain research", 5' International Annual IPSERA Conference, Belfast and Dublin, pp. 13-22.

15. Aitken, J., Christopher, M. and Towill, D.R. (2002), "Understanding, implementing and exploiting agility and leanness, International Journal of Logistics: Research and Applications, Vol. 5, No. 1, pp. 59-74.

16. Akhavan, P., Jafari, M. and Ali-Ahmadi, A.R. (2006), "Exploring the interdependency between reengineering and information technology by developing a conceptual model". Business Process Management Journal, Vol. 12, No. 4, pp. 517-534.

17. Albino, V. and Garavelli, A.C. (1998), "A neural network application to subcontractor rating in construction firms". International Journal of Project Management, Vol. 16, No. 1, pp. 9-14.

18. Al-Mudimigh, A. S., Zairi, M. and Ahmed, A.M. (2004), "Extending the concept of supply chain: The effective management of value chains". International Journal of Production Economics, Vol. 87, pp. 309-320.

19. Andersen, B. (1999), "Business Process Improvement Toolbox", American Society for Quality, Kensington, MD.

20. Anderson, P. and Petersen, N.C. (1993), " A procedure for ranking efficient units in data envelopment analysis", Management Science, Vol. 39, No. 10, pp. 1261-1264.

21. Anjard, R.P. (1995), "Computer integrated manufacturing: a dream becoming a reality". Industrial Management & Data Systems, Vol. 95, No. 1, pp. 3-4.

22. Anumba, C.J., Siemieniuch, C.E. and Sinclair, M.A. (2000), "Supply chain implications of concurrent engineering". International Journal of Physical Distribution & Logistics Management, Vol. 30, No. 7/8, pp. 566-597.

23. Appleton, E. and Garside, J.A. (2000), "A team-based design for assembly methodology". Assembly Automation, Vol. 20, No. 2, pp. 162-169.

248

24. Attaran, M. (1997), "CIM: getting set for implementation", Industrial Management & Data Systems, Vol. 97, No. 1, pp. 3-9.

25. Babu, A.S., Nandurkar, K.N. and Thomas, A. (2000), "Development of virtual cellular manufacturing systems for SMEs", Logistics Information Management, Volume 13, No. 4, pp. 228-242.

26. Badri, M.A. (1999), "Combining the analytic hierarchy process and goal programming for global facility location-allocation problem". International Journal of Production Economics, Vol. 62, pp. 237-48.

27. Badri, M.A. (2001), "A combined AHP-GP model for quality control systems", IntemationalJoumal of Production Economics, Vol. 72, pp. 27-40.

28. Baker, P. (2007), "The design and operation of distribution centers within agile supply chains", International Journal of Production Economics, doi:10.1016/j.ijpe.2006.09.019.

29. Bal, J., Wilding, R. and Goundry, J. (1999), "Virtual teaming in the agile supply chain". International Journal of Logistics Management, Vol. 10, No. 2, pp. 71-83.

30. Balakrishnan, J. and Cheng, C.H. (2007), "Multi-period plaiming and uncertainty issues in cellular manufacturing: A review and future directions", European Journal of Operational Research, Vol. 177, pp. 281-309.

31. Banker, R.D., Chames, A. and Cooper, W.W. (1984), "Some models for estimating technical and scale inefficiencies in data envelopment analysis", Management Science, Vol. 30, No. 9, pp. 1078-1092.

32. Barad, M. and Nof, S.Y. (1997), "CIM flexibility measures: a review and a framework for analysis and applicability assessment", International Journal of Computer Integrated Manufacturing, Vol. 10, Nos. 1-4, pp. 296-308.

33. Barbarosoglu, G. and Yazgac, T. (1997), "Application of the analytical hierarchy process to the supplier selection problem". Production and Inventory Management Journal, Vol. 38, No. 1, pp. 14-21.

34. Barla, S.B. (2003), "A case study of supplier selection for lean supply by using a mathematical model". Logistics Information Management, Vol. 16, No. 6, pp. 451-459.

35. Barros, C.P. (2006), "Efficiency measurement among hypermarkets and supermarkets and the identification of the efficiency drivers: A case study". International Journal of Retail & Distribution Management, Vol. 34, No. 2, pp. 135-154.

249

36. Bartezzaghi, E. (1999), "The evolution of production models: is a new paradigm emerging?", International Journal of Operations & Production Management, Vol. 19,No. 2, pp. 229-250.

37. Bergring, J. and Andersin, H. (1994), "Designing performance measurement systems for improving the visibility of the concurrent engineering process". Proceedings of CE94: Concurrent Engineering Research and Applications Conference, Pittsburgh, PA.

38. Bessant, J., Francis, D., Meredith, S., Kaplinsky, R. and Brown, S. (2001), "Developing manufacturing agility in SMEs", International Journal of Technology Management, Vol. 22, No. 1/2/3, pp. 28-54.

39. Bhutta, K.S. and Huq, F. (2002), "Supplier selection problem: a comparison of the total cost of ownership and analytic hierarchy process approaches". Supply Chain Management: An International Journal, Vol. 7, No. 3, pp. 126-135.

40. Bloch, M. and Pigneur, Y. (1995), "The extended enterprise: a descriptive framework, some enabling technologies and case studies". Proceedings of the 2nd International Conference Network Organisation Management, June.

41. Bolanos, R., Fontela, E., Nenclares, A. and Paster, P. (2005), "Using interpretive structural modeling in strategic decision making groups". Management Decision, Vol. 43, No. 6, pp. 877-895.

42. Booth, R. (1996), "Agile manufacturing". Engineering Management Journal, Vol. 6, No. 2, pp. 105-112.

43. Boothroyd, G., Dewhurst, P. and Knight, W. (1994), "Product Design for Manufacture and Assembly", M. Dekker, New York, NY.

44. Boubekri, N., Dedeoglu, M. and Eldeeb, H. (1995), "Application of standards in the design of computer-integrated manufacturing systems", Integrated Manufacturing Systems, Vol. 6, No. 1, pp. 27-34.

45. Boussofiane, A., Dyson, R.G. and Thanassoulis (1991), "Applied data envelopment analysis", European Journal of Operation Research, Vol. 53, pp. 1-15.

46. Boyer, K., Ward, P. and Leong, O.K. (1996), "Approaches to the factory of the future: anempirical taxonomy". Journal of Operations Management, Vol. 14, pp. 297-313.

47. Braglia, M. and Petroni, A. (2000), "A quality assurance oriented methodology for handling trade-offs in supplier selection". International Journal of Physical Distribution & Logistics Management, Vol. 30, No. 2, pp. 96-111.

250

48. Brah, S.A. and Lim, H.Y. (2006), "The effects of technology and TQM on the performance of logistics companies". International Journal of Physical Distribution & Logistics Management, Vol. 36, No. 3, pp. 192-209.

49. Broughton, T. (1990), "Simultaneous engineering in aero gas turbine design and manufacture". Proceedings of the 1st International Conference on Simultaneous Engineering, Status Meetings, London.

50. Brown, S. and Bessant, J. (2003), "The manufacturing strategy-capabilities links in mass customisation and agile manufacturing - an exploratory study". International Journal of Operations & Production Management, Vol. 23, No. 7, pp. 707 - 730.

51. Browne, J. and Zhang, J. (1999), "Extended and virtual enterprises - similarities and differences. International Journal of Agile Management Systems, Vol. 1, No.l, pp. 30-36.

52. Bullinger, H.J. (1999), "Turbulent times require creative thinking: new European concepts in production management". International Journal of production Economics, No. 60-61, pp.9-27.

53. Burgess, T.F. (1994), " Making the leap to agility: defining and achieving agile manufacturing through business process redesign and business network redesign". International Journal of Operations and Production Management, Vol. 14, No. 11, pp. 23-34.

54. Cagliano, R., Caniato, F. and Spina, G. (2004), "Lean, Agile and traditional supply: how do they impact manufacturing performance?", Journal of Purchasing & Supply Management, Vol. 10, pp.151-164.

55. Cao, G., Clarke, S. and Lehaney, B. (2001), "A critique of BPR from a holistic perspective", Business Process Management Journal, Vol. 7, No. 4, pp. 332-339.

56. Caputo, A.C., Cardarelli, G., Palumbo, M. and Pelagagge, P.M. (1998), "Computer integrated manufacturing in small companies: a case study". Industrial Management & Data Systems, Vol. 98, No. 3, pp. 138-44.

57. Caridi, M. and Cigolini, R. (2002), "Improving materials management effectiveness: A step towards agile enterprise". International Journal of Physical Distribution and Logistics Management", Vol. 32, No. 7, pp. 556-576.

58. Carter, D.E. and Baker, B.S. (1992), Concurrent Engineering, the Product Development Environment for the 1990s, Addison-Wesley, Reading, MA.

59. Chames, A. and Cooper, W.W. (1961), "Management Models and Industrial Applications of Linear Programming ", John Wiley and Sons, New York.

251

60. Chames, A., Cooper, W.W. and Rhodes, E. (1978), "Measuring the efficiency of decision-making-units", European Journal of Operational Research, Vol. 2, No. 6, pp. 429-444.

61. Chen, S-J. and Lin, L. (2003), "Decomposition of interdependent task group for concurrent engineering". Computers and Industrial Engineering, Vol. 44 , No. 3, pp. 435 - 459.

62. Chen, S.H., Lin, H.T. and Lee, H.T. (2004), "Enterprise partner selection for vocational education: analytical network process approach". International Journal of Manpower, Vol. 25, No. 7, pp. 643-655.

63. Chen, Z., Li, H., Kong, S.C.W. and Xu, Q. (2006), "An analytic knowledge network process for construction entrepreneurship education", Journal of Management Development, Vol. 25, No. 1, pp. 11-27.

64. Chiadamrong, N. and O'Brien, C. (1999), "Decision support tools for justifying alternative manufacturing and production control systems". International Journal of Production Economics, Vol. 60/61, pp. 177-186.

65. Childerhouse, P. and Towill, D. (2000), "Engineering supply chains to meet customer requirements". Logistics Information Management, Vol. 13, No. 6, pp. 337-345.

66. Chin-Yin, H. and Shimon, Y.N. (1999), "Enterprise agility: A view from the PRISM lab". International Journal of Agile Manufacturing Systems, Vol. 1, No. 1, pp. 51-59.

67. Cho, H., Jung, M. and Kim, M. (1996) "Enabling Technologies of agile manufacturing and its related activities in Korea", Computers and Industrial Engineering, Vol. 30, No. 3, pp. 323-334.

68. Choi, T.Y. and Hartley, J.L. (1996), "An exploration of supplier selection practices across the supply chain", Journal of Operations Management, Vol. 14, pp. 333-343.

69. Choi, S. H. and Samavedam, S. (2001), "Visualisation of rapid prototyping", Rapid Prototyping Journal, Vol. 7, No. 2, pp. 99-114.

70. Choy, K.L., Lee, W.B. and Lo, V. (2004), "An enterprise collaborative management system - a case study of supplier relationship management". The Journal of Enterprise Information Management, Vol. 17, No. 3, pp. 191-207.

71. Christopher, M. (1998), Logistics & Supply Chain Management: Strategies for Reducing Costs and Improving Services, Pitman Publishing, London.

252

72. Christopher, M. (2000), "The agile supply chain; competing in volatile markets". Industrial Marketing Management, Vol. 29, pp. 37-44.

73. Christopher, M. and Towill, D.R. (2000), "Supply chain migration from lean and functional to agile and customized". Supply Chain Management: An International Journal, Vol. 5, No. 4, pp. 206-213.

74. Christopher, M., Lowson, R. and Peck, H. (2004), "Creating agile supply chains in the fashion industry. International Journal of Retail and Distribution Management, Vol. 32, No. 8, pp. 367-376.

75. Clements, P. (1997), "Standards support for the virtual enterprise", Assembly Automation, Vol. 17, No. 4, pp. 307-314.

76. Comer, J. L. and Comer, P. D. (1991), "Decision analysis applications in the operations research literature", Operations Research, Vol. 39, pp. 206-218.

77. Cox III, J.F. and Blackstone, J.H. (1998), "APICSDictionary (^^ edition)". Falls Church, VA.

78. Cox, A. (1999),"Power, Value and Supply Chain Management", Supply Chain Management: An International Journal, Vol. 4, No. 4, pp. 167-175.

79. Crocitto, M. and Youssef, M. (2003), "The human side of organizational agility", Industrial Management &Data Systems, Vol.103, No. 6, pp. 388-397.

80. Dahel, N.E. (2003), "Vendor selection and order quantity allocation in volume discount environments". Supply Chain Management: An International Journal, Vol. 8, No. 4, pp. 335-342.

81. Dangayach, G.S. (2001), "Some issues in manufacturing strategy: A select study of Indian manufacturing companies", PhD thesis, submitted to Indian Institute of Technology Delhi, New Delhi.

82. Dangayach, G.S. and Deshmukh, S.G. (2005), "Advanced manufacturing technology implementation: Evidence from Indian small and medium enterprises (SMEs)", Journal of Manufacturing Technology Management, Vol. 16, No. 5, pp. 483-496.

83. Daniels, S. (1998), "The virtual corporation". Work Study, Vol. 47, No. 1, pp. 20-22.

84. De Boer, L., Van der Wegen, L. and Telgen, J. (1998), "Outranking methods in support of supplier selection", European Journal of Purchasing & Supply Management, Vol. 4, No. 2/3, pp. 109-18.

253

85. De Boer, L., Labro, E. and Morlacchi, P. (2001), "A review of methods supplier selection", European Journal of Purchasing & Supply Management, Vol. 7, Issue 2, pp. 75-89.

86. Degraeve, Z., Labro, E. and Roodhooft, F. (2000), "An evaluation of vendor selection models from a total cost of ownership perspective", European Journal of Operational Research, Vol. 25, Issue 1, pp. 34-58.

87. Devor, R., Graves, R. and Mills, J.J. (1997), "Agile manufacturing research: accomplishments and opportunities", HE Transactions, Vol. 29, No. 10, pp. 813 -823.

88. Dickson, G. (1966), "An analysis of vendor selection systems and decisions". Journal of Purchasing, Vol. 2, No. 1, pp. 5-17.

89. Dogan, I and Sahin, U. (2003), "Supplier selection using activity-based costing and fiizzy present-worth techniques", Logistics Information Management, Vol. 16, No. 6, pp. 420-426.

90. Dove, R. (1995), "Measuring agility, the toll of turmoil". Production, Vol. 107, pp. 12-14.

91.DufFie, N.A. and Prabhu, V.V. (1996), "Hetrorarchical control of highly distributed manufacturing systems". International Journal of Computer Integrated Manufacturing, Vol. 9, pp. 270-281.

92. Duperrin, J.C. and Godet, M. (1973), "Methode de Hierarhisation des Elements d'un Systeme", Rapport Economique du CEA, R-45-51, Paris.

93. Durmusoglu, S.S., Calantone, R.J. and Sambamurthy, V. (2006), "Is more information technology better for new product development?". Journal of Product & Brand Management, Vol. 15, No. 7, pp. 435-441.

94. Dyer, J.S. (1990), "Remarks on the analytic hierarchy Process", Management Science, Vol. 36, pp. 249-258.

95. Elkins, D.A., Huang, N, and Alden, J.M. (2004), "Agile manufacturing systems in the automotive industry". International Journal of Production Economics, Vol. 91, No. 3, pp. 201-214.

96. Erixon, G. (1998), "MFD - modular function deployment, a systematic method and procedure for company supportive product modularization ", PhD thesis. The Royal Institute of Technology, Stockholm.

254

97. Ernst, R. and Kamrad, B. (2000), "Evaluation of supply chain structures through modularization and postponement", European Journal of Operational Research, Vol. 124, No. 3, pp. 495-510.

98. Eversheim, W. (1990), "Trends and experience in applying simultaneous engineering in Germany", Proceedings of the 1st International Conference on Simultaneous Engineering, Status Meetings, London.

99. Faisal, M.N., Banwet, D.K. and Shankar, R. (2006), "Supply chain risk mitigation: modeling the enablers". Business Process Management Journal, Vol. 12, No. 4, pp. 535-552.

100. Fan, C. K. and Wong, T. N. (2003), "Agent-based architecture for manufacturing system control". Integrated Manufacturing Systems, Vol. 14, No. 7, pp. 599-609.

101. Ferreira, J.C, Santos, E., Madureira, H. and Castro, J. (2006), "Integration of VP/RP/RT/RE/RM for rapid product and process development", Rapid Prototyping Journal, Vol. 12, No.l,pp. 18-25.

102. Fischer, M., Jahn, H. and Teich, T. (2004), "Optimizing the selection of partners$in production networks". Robotics and Computer-Integrated Manufacturing, Vol. 20, Issue 6, pp. 593-601.

103. Fliedner, D. and Vokurka, R.J. (1997), "Agility: Competitive Weapon of the 1990's and beyond?". Production and Inventory Management Journal, Vol. 38, No. 3, pp. 19-24.

104. Forman, E.H. and Selly, M.A. (2001), ''Decision by Objectives", World Scientific Press, Singapore.

105. Forsythe, C. and Ashby, M.R. (1995), "User-driven product data manager system design". Proceedings of the Human Factors and Ergonomics Society, Vol. 2, pp. 1170-1174.

106. Forsythe, C. and Ashby, M.R. (1996), "Human factors in agile manufacturing", Ergonomics in Design, Vol. 4, No. 1, pp. 15-21.

107. Forsythe, S. (1997), "Human factors in agile manufacturing: A brief overview with emphasis on communications and information infrastructure". Human Factors and Ergonomics in Manufacturing, Vol. 7, No. 1, pp. 3-10.

108. Frank, R.L. (1996), "Security Issues in the Virtual Corporation", Computers & Security, Vol.15, pp. 471-476.

255

109. Frohlich, M.T. and Westbrook, R. (2001), "Arcs of integration: an international study of supply chain strategies". Journal of Operations Management, Vol. 19, pp. 185-200.

110. Gershenson, J. and Ishii, K. (1993), "Life-cycle serviceability design", in Kusiak, A. (Ed.), Concurrent Engineering: Automation, Tools, and techniques, John Wiley and Sons, New York, NY, pp. 363-383.

111. Ghodsypour, S.H. and O'Brien, C. (1998), "A decision support system for supplier selection using an integrated analytic hierarchy process and linear programming", International Journal of Production Economics, Vol. 56-57, pp. 199-212.

112. Giffi, C, Roth, A.V. and Seal, G.M. (1990), "Compete in World Class Manufacturing: America's 21st Century Challenge", Business One Irwin, Homewood, IL.

113. Gokeen, H. and Erel, E. (1997), "A goal programming approach to mixed model assembly line balancing problem". International Journal of Production Economics, Vol. 48, pp. 177-185.

114. Gokeen, H. and Agpak, K. (2006), "A goal programming approach to simple U-line balancing problem", European Journal of Operational Research, Vol. 171, pp. 577-585.

115. Goldhar, J.D. and Jelenik, M. (1983), "Plan for economies of scope", Harvard Business Review, Vol. 61, pp. 141-148.

116. Goldman, S.L. (1994), "An agility primer", Agility Report, Agile Manufacturing Enterprise Forum, November, pp. 1-4.

117. Goldman, S.L., Nagel, R.N. and Preiss, K. (1995), "Agile Competitors and Virtual Organizations: Strategies for Enriching the Customer", Van Nostrand Reinhold, New York.

118. Gonza'lez, M.E., Quesada, G. and Monge, C.A.M. (2004), "Determining the importance of the supplier selection process in manufacturing: a case study", International Journal of Physical Distribution & Logistics Management, Vol. 34, No. 6, pp. 492-504.

119. Gould, P. (1997), "What is agility?". Manufacturing Engineer, Vol. 76, No. 1, pp. 28-31.

256

120. Graves, R.J., Agrawal, A. and Haberle K. (1996), "Estimating tools to support multipath agility in electronics manufacturing", IEEE Transactions on Components, Packaging, and Manufacturing Technology Part C: Manufacturing, Vol. 19, No. 1, pp. 48-56.

121. Griffith, D. (1998), "Vendor selection criteria for resellers". Computer and Technology Review, Vol. 18, pp. 40-42.

122. Groover, M.P. (2002), "Automation, Production Systems, and Computer-Integrated Manufacturing", Second Edition, PHI.

123. Guisinger, A. and Ghorashi, B. (2004), "Agile manufacturing practices in the specialty chemical industry: An overview of the trends and results of a specific case study", IntemationalJournal of Operations & Production Management, Vol. 24, No. 6, pp. 625-635.

124. Gunasekaran, A. (1999), "Agile manufacturing: A framework for research and development". International Journal of Production Economics, Vol. 62, Issue 1-2, pp.87-105.

125. Gunasekaran, A., Chung, W.W.C. and Kan, K. (2000), "Business process reengineering in a British company: a case study". Logistics Information Management, Vol. 13, No. 5, pp. 271-285.

126. Gunasekaran, A. and Yusuf, Y. (2002), "Agile manufacturing: a taxonomy of strategic and technological imperatives". International Journal of Production Research, Vol. 40, No. 6, pp. 1357-1385.

127. Gunasekaran, A., Tirtiroglu, E. and Wolstencroft, V. (2002), "An investigation into the application of agile manufacturing in an aerospace company", Technovation, Vol. 22, pp. 405-415.

128. Gunn, T.G. (1987), "Manufacturing for Competitive Advantage: Becoming A World Class Manufacturer", Ballinger Publishing Company, Cambridge, MA.

129. Gupta, P. and Nagi, R. (1995), "Flexible optimization framework for partner selection in agile manufacturing", Industrial Engineering Research - Conference Proceedings, pp. 691-700.

130. Gupta, K.M. and Gunasekaran, A. (2005), "Costing in new enterprise environment: A challenge for managerial accounting researchers and practitioners". Managerial Auditing Journal, Vol. 20, No. 4, pp. 337-353.

131. Hallikas, J., Virolainen, V-M. and Tuominen, M. (2002), "Risk analysis and assessment in network environments: A dyadic case study". International Journal of Production Economics, Vol. 78, pp. 45-55.

257

132. Hammer, M. and Champy, J. (1993), "Reengineering the Corporation: A Manifesto for Business Revolution ", HarperCollins Publishers Inc., New York, NY.

133. Handfield, R.B. (1994), "US Global Sourcing: Patterns of Development", International Journal of Operations & Production Management, Vol. 14, No. 6, pp. 40-51.

134. Handley, C. (1997), "Agile Manufacturing", Compressed Air, July 3"*.

135. Hannam, R. (1997), "Computer Integrated Manufacturing: From Concepts to Realisation ", Addison-Wesley, Reading, MA.

136. Haque, B. and Pawar, K.S. (2003), "Organisational analysis: A process-based model for concurrent engineering environments". Business Process Management Journal, Vol. 9, No. 4, pp. 490-526.

137. Harland, C. (1996), "Supply Network strategies - the case of health supplies", European Journal of Purchasing and Supply Management, Vol. 2, No. 4, pp. 183-192.

138. Harrison, A., Christopher, M. and van Hoek, R. (1999), "Creating the agile supply chain", working paper. School of Management, Cranfield University, Cranfield.

139. Hassan, H. and Kikuo, N. (2005), "A model for selecting a CIFMS design method". Journal of Manufacturing Technology Management, Vol. 16, No. 5, pp. 497-515.

140. Hayes, R.H. and Wheelwright, S.C. (1984), "Restoring Our Competitive Edge: Competing through Manufacturing", Wiley, New York.

141. Hayes, R., Pisano, G., Upton, D. and Wheelwright, S. (2005), "Operations, Strategy and Technology: Pursuing the Competitive Edge", Wiley, New York, NY.

142. Helo, P.T. (1999), "Dynamic modeling of agility in supply chain". Proceedings of 15' International Conference on Production Research (ICPR), pp. 545-548.

143. Henderson, S.C, Swamidass, P.M. and Byrd, T.A. (2004), "Empirical models of the effect of integrated manufacturing on manufacturing performance and return on investment". International Journal of Production Research, Vol. 42, No. 10, pp. 1933-1954.

144. Hill, T. (1993), "Manufacturing Strategy: Text and Cases", 2nd ed., Macmillan, London.

258

145. Hopkinson, N. and Dickens, P. (2001), "Rapid prototyping for direct manufacture", Rapid Prototyping Journal, Vol. 7, No. 4, pp. 197-202.

146. Hopp, W.J. and Oyen, M.P.V. (2004), "Agile workforce evaluation: A framework for cross-training and coordination", HE Transactions, Vol. 36, pp. 919-940.

147. Hoyt, J., Huq, F. and Liles D. (1997), "Design of a Study to Test the Statistical Significance of Five Enablers of Agile Manufacturing Organizafions", 6th Industrial Engineering Research Conference Proceedings, pp. 966 - 971.

148. Huang X.G., Wong Y.S. and Wang J.G. (2004), "A two stage manufacturing partner selection framework for virtual enterprises", International Journal of Computer Integrated Manufacturing, Vol. 17, No. 4, pp. 294-304.

149. Humphreys, P., Mak, K.L. and Yeung, CM. (1998), "A just-in-time evaluation strategy for international procurement". Supply Chain Management, Vol. 3, No. 4, pp. 175-186.

150. lacocca Institute (1991), "21^' Century Manufacturing Enterprise Strategy - An Industry-Led View", Vols 1&2, lacocca Institute, Bethlehem, PA.

151. IMS (1996), Intelligent Manufacturing Systems, http://www.img.org.

152. Irani, Z., Ezingeard, J.-M., and Grieve, R.J. (1997), "Integrating the costs of an IT/IS infrastructure into the investment decision making process". The International Journal of Technological Innovation, Entrepreneurship and Technology Management (Technovation), Vol. 17, No. 11/12, pp. 695-706.

153. Jagdev, H.S. and Browne, J. (1998), "The extended enterprise - a context for manufacturing". Production Planning and Control, Vol. 9, No. 3, pp. 216-229.

154. Jharkharia, S. and Shankar, R. (2004), "IT-enablement of supply chains: modeling the enablers". International Journal of Productivity and Performance Management, Vol. 53, No. 8, pp. 700-712.

155. Jharkharia, S. and Shankar, R. (2005), "IT-enablement of supply chains: understanding the barriers". Journal of Enterprise Information Management, Volume 18, No. l,pp. 11-27.

156. Jiao, R.J., Pokharel, S., Kumar, A. and Zhang, L. (2^07), "Development of an online quality information system for e-manufacturing". Journal of Manufacturing Technology Management, Vol. 18, No. 1, pp. 36-53.

157. Jin-Hai, L., Anderson, A.R. and Harrison, R.T. (2003), "The evolution of agile manufacturing", Business Process Management Journal, Vol. 9, No. 2, pp. 170-189.

259

158. Kadambi, B. (2000), "IT-Enabled supply chain management- A preliminary study of few manufacturing companies in India", http://www.xlri.ac.in/cltm/LogistiX-2-2000.HTM.

159. Kahraman, C, Cebeci, U. and Ulukan, Z. (2003), "Multi-criteria supplier selection using fiizzy AHP", Logistics Information Management, Vol. 16, No. 6, pp. 382-394.

160. Kapoor, V. and Ellinger, A.E. (2004), "Transforming supply chain operations in response to economic reform: the case of a motorcycle manufacturer in India", Supply Chain Management: An IntemationalJournal, Vol. 9, No. 1, pp. 16-22.

161. Karlsson, A. (2002), "Assembly-initiated production - a strategy for mass-customisation utilising modular, hybrid automatic production systems". Assembly Automation, Vol. 22, No. 3, pp 239-247.

162. Karsak, E.E., Sozer, S. and Alptekin, S.E. (2002), "Product planning in quality ftmction deployment using a combined analytic network process and goal programming approach". Computers and Industrial Engineering, Vol. 44, No. 1, pp. 171-190.

163. Katayama, H. and Bennett, D. (1999), "Agility, adaptability and leanness: A comparison of concepts and a study of practice". International Journal of Production Economics, Vol. 60-61, pp. 43-51.

164. Keung, K.W., Ip, W.H. and Chan, C.Y. (2001), "An enhanced MPS solution for FMS using GAs", Integrated Manufacturing Systems, Vol. 12, No. 5, pp. 351-359.

165. Khalfan, M.M.A., Anumba, C.J. and Carrillo, P.M. (2001), "Development of a readiness assessment model for concurrent engineering in construction". Benchmarking: An IntemationalJournal, Vol. 8, No. 3, pp. 223-239.

166. Kidd, P.T. (1994), "Agile Manufacturing: Forging New frontiers", Addison-Wesley, MA.

167. Kidd, P.T. (1996), "Agile manufacturing: a strategy for the 21" century". Proceedings of the lEE Colloquium on Agile Manufacturing, lEE Colloquium (Digest), London, No. 74, pp. 1/1-6.

168. Kim, J. (1998), "Hierarchical Structure of Intranet Functions and Their Relative Importance: Using the Analytic Hierarchy Process for Virtual Organizations", Decision Support Systems, Vol. 23, pp. 59-74.

260

169. Kleindorfer, P.R. and Partovi, F.Y. (1990), "Integrating manufacturing strategy and technology choice", European Journal of Operational Research, Vol. 47, pp. 214-224.

170. Koh, S.C, Jones, M.H., Saad, S.M., Arunachalam, S. and Gunasekaran, A. (2000), "Measuring uncertainties in MRP environments", Logistics Information Management, Vol. 13, No. 3, pp. 177-183.

171. KoUberg, B. and Dahlgaard, J.J. (2007), "Measuring lean initiatives in health care services: issues and findings". International Journal of Productivity and Performance Management", Vol. 56, No. 1, pp. 7-24.

172. Komelius, L. and Wamelink, J.W.F. (1998), "The virtual corporation: learning from construction". Supply Chain Management, Volume 3, No. 4, pp. 193-202.

173. Korpela, J., Lehmusvaara, A. and Nisonen, J. (in press), "Warehouse operator selection by combining AHP and DEA methodologies", International Journal of Production Economics, doi:10.1016/j.ijpe.2006.12.046.

174. Koste, L.L., Malhotra, M.K. and Sharma, S. (2004), "Measuring dimensions of manufacturing flexibility", Journal of Operations Management, Vol. 22, pp. 171-196.

175. Kotha, S. (1995), "Mass customisation: implementing the emerging paradigm for competitive advantage", Strategic Management Journal, Vol. 16, pp. 21-42.

176. Krajewski. L. and Ritzman, L. (1987), Operations Management, Addison-Wesley Publishing, Reading, MA.

177. Krause, D.R., Pagell, M. and Curkovic, S. (2001), "Toward a measure of competitive priorities for purchasing". Journal of Operations Management, Vol. 19, Issue 4, pp. 497-512.

178. Kumar, A. and Motwani, J. (1995), "A methodology for assessing time-based competitive advantage of manufacturing firms". International Journal of Operations & Production Management, Vol. 15, No. 2, pp. 36-53.

179. Kwan, A.T.W. (1999), "The use of information technology to enhance supply chain management in the electronics and chemical industries". Production and Inventory Management Journal, Vol. 40, No. 3, pp.7-15.

180. Kwon, I-W.G. and Suh, T. (2005), "Trust, commitment and relationships in supply chain management: a path analysis". Supply Chain Management: An International Journal, Vol. 10, No. 1, pp. 26-33.

261

181. Kwong, C.K., Ip, W.H. and Chan, J.W.K. (2002), "Combining scoring method and fUzzy expert systems approach to supplier assessment: a case study". Integrated Manufacturing Systems, Vol. 13, No. 7, pp. 512-519.

182. Lamming, R.C. (1993), "Beyond Partnership: Strategies for Innovation and Lean Supply", Prentice-Hall, Hemel Hempstead.

183. Lau, H.C.W. and Wong, E.T.T. (2001), "Partner selection and information infrastructure of a virtual enterprise network", International Journal of Computer Integrated Manufacturing, Vol. 14, No. 2, pp.186-193.

184. Lau, H.C.W., Wong, C.W.Y., Pun, K.F. and Chin, K.S. (2003), "Virtual agent modeling of an agile supply chain infrastructure". Management Decision, Vol. 41, No. 7, pp. 625-634.

185. Lau, H.Y.K. and Mak, K.L. (2004), "The design of flexible manufacturing systems using an extended unified framework", Journal of Manufacturing Technology Management, Vol. 15, No. 3, pp. 222-238.

186. Lau, H.C.W., Lau, P.K.H., Fung, R.Y.K., Chan, F.T.S. and Ip, R.W.L. (2005), "A virtual case benchmarking scheme for vendors' performance assessment", Benchmarking: An International Journal, Vol. 12, No. 1, pp. 61-80.

187. Leachman, C, Pegels, C.C. and Shin, S.K. (2005), "Manufacturing performance: evaluation and determinants". International Journal of Operations & Production Management, Vol. 25, No. 9, pp. 851-874.

188. Lee, H.L. and Billington, C. (1992), "Managing supply chain inventory: pitfalls and opportunities, Sloan Management Review, pp. 65-73.

189. Lee, H., Kwak, W. and Han, 1. (1995), "Developing a business performance evaluation system: an analytic hierarchical model", Uie Engineering Economist, Vol. 40, No. 4, pp. 343-357.

190. Lee, C.W. and Kwak, N.K. (1999), "Information resource planning for a healthcare system using an AHP-based goal programming method". Journal of Operation Research Society, Vol. 50, pp.1191-1198.

191. Lee, J.W. and Kim, S.H. (2000), "Using analytic network process and goal programming for interdependent information system project selection. Computers and Operations research. Vol. 27, pp. 367-382.

192. Lee, H.L. and Whang, S. (2000), "Information sharing in a supply chain". International Journal of Technology Management, Vol.20, No. 3/4, pp. 373-387.

262

193. Lee, W.B., Cheung, C. F., Lau, H.C.W. and Choy, K.L. (2003), "Development of a web-based enterprise collaborative platform for networked enterprises", Business Process Management Journal, Vol. 9, No. 1, pp. 46-59.

194. Lefebvre, L.A., Lefebvre, E. and Harvey, J. (1996), "Intangible assets as determinants of advanced manufacturing technology adoption in SME's: toward an evolutionary model", International Journal of IEEE Transactions on Engineering Management, Vol. 43, No. 3, pp. 307-322.

195. Lefley, F., Wharton, F., Hajek, L., Hynek, J. and Janecek, V. (2004), "Manufacturing investments in the Czech Republic: An international comparison". International Journal of Production Economics, Vol. 88, No.l, pp. 1-14.

196. Li, D-C, Wu, C-S., Tsai, T-I and Lina, Y-S (2007), "Using mega-trend-diffiasion and artificial samples in small data set learning for early flexible manufacturing system scheduling knowledge". Computers & Operations Research, Vol. 34, pp. 966-982.

197. Lin, Y.J. and Uhler, A. (2002), "Shortening the design for assembly process time for torque converter development". Assembly Automation, Vol. 22, No. 3, pp. 248-259.

198. Lin, C-T, Chiu, H. and Chu, P-Y (2006), "Agility index in the supply chain". International Journal of Production Economics, Vol. 100, No. 2, pp.285-299.

199. Lin, L.H. and Lu, I.Y. (2005), "Adoption of virtual organization by Taiwanese electronics firms: An empirical study of organization structure innovation", Journal of Organizational Change Management, Vol. 18, No. 2, pp. 184-200.

200. Liu, J., Ding, F.Y. and Lall, V. (2000), "Using data envelopment analysis to compare suppliers for supplier selection and performance improvement". Supply Chain Management: An International Journal, Vol. 5, No. 3, pp. 143-150.

201. Lohman, C, Fortuin, L. and Wouters, M. (2004), "Designing a performance measurement system: A case study", European Journal of Operational Research, Vol. 156, pp. 267-286.

202. Lozano, S. and Villa, G. (2006), "Data envelopment analysis of integer-valued inputs and outputs". Computers & Operations Research, Vol. 33, pp. 3004-3014.

203. Lu, Q. and Wood, L. (2006), "The refinement of design for manufacture: inclusion of process design". International Journal of Operations & Production Management, Vol. 26, No. 10, pp. 1123-1145.

263

204. Luong, L.H.S. (1999), "Decision support systems for the selection of computer integrated manufacturing technologies", Robotics & Computer-Integrated Manufacturing, Vol. 14, No. 4, pp. 45-53.

205. Malone, D.W. (1975), "An introduction to the application of interpretive structural modeling". Proceedings of IEEE, Vol. 63, pp. 397-404.

206. Mandal, A., and Deshmukh, S.G. (1994), "Vendor selection using interpretive structural modeling (ISM)", International Journal of Operations & Production Management, Vol. 14, No. 6, pp. 52-59.

207. Marri, H.B., Gunasekaran, A., Kobu, B. and Grieve, R.J. (2002), "Govemment-industry-university collaboration on the successful implementation of CIM in SMEs: an empirical analysis". Logistics Information Management, Vol. 15, No. 2, pp. 105-114.

208. Masella, C. and Rangone, A. (2000), "A contingent approach to the design of vendor selection systems for different types of cooperative customer/supplier relationships". International Journal of Operations & Production management. Vol. 20, No. 1, pp. 70-84.

209. Maskell, B. (2001), "The age of agile manufacturing", Supply Chain Management: An International Journal, Vol. 6, No. 1, pp. 5-11.

210. Mason-Jones, R. and Towill, D.R. (1999), "Total cycle time compression and the agile supply chain". International Journal of Production Economics, Vol. 62, pp. 61-73.

211. Mason-Jones, R., Naylor, J.B. and Towill, D.R. (2000a), "Engineering the leagile supply chain". International Journal of Agile Management Systems, Vol. 2, No. 1, pp. 54-61.

212. Mason-Jones, R., Naylor, J.B. and Towill, D.R. (2000b), "Lean, agile or leagile?: Matching your supply chain to the marketplace". International Journal of Production Research, Vol. 38, No. 17, pp. 4061-4070.

213. McGaughy, R. E. (2002), "Benchmarking business-to-business electronic commerce", Benchmarking: An International Journal, Vol. 9, No. 5, pp. 471-484.

214. Meade, L.M., Liles, D.H. and Sarkis, J. (1997), "Justifying Strategic Alliances and Partnering: a Prerequisite for Virtual Enterprising", Omega, International Journal of Management Science, Vol. 25, No. 1, pp. 29-42.

215. Meade, L.M. and Sarkis, J. (1999), "Analyzing organizational project alternatives for agile manufacturing processes: an analytical network approach". International Journal of Production Research, Vol. 37, No. 2, pp. 241-261.

264

216. Meade, L. and Sarkis, J. (2002), "A conceptual model for selecting and evaluating third-party reverse logistics providers", Supply Chain Management: An IntemationalJoumal, Vol. 7, No. 5, pp. 283-295.

217. Melcher, A.J., Khouja, M. and Booth, D.E. (2002), "Toward a production classification system", Business Process Management Journal, Vol. 8, No. 1, pp. 53-79.

218. Mohanty, R.P. and Deshmukh, S.G. (1998), "Advanced manufacturing technology selection: A strategic model for learning and evaluation", IntemationalJoumal of Production Economics, Vol. 55, pp. 295-307.

219. Montgomery, J.C. and Levine, L.O. (1996), "The transmission to agile manufacturing: Staging flexible for competitive advantage", ASQC quality press.

220. Morgan, R.E. (2004), "Business agility and internal marketing", European Business Review, Vol. 16, No. 5, pp. 464-472.

221. Morlacchi, P., Pavesi, S. and Savoldelli, A. (1997), "Sourcing relationships within the supply chain of Italian machinery sector: supplier selection as a first step to manage supply chain", Proceedings of IFIP WG5.7 Conference, 15-18 September, Ascona, Switzerland.

222. Moynihan, G.P., Saxena, P. and Fonseca, D.J. (2006), "Development of a decision support system for procurement operations", International Journal of Logistics Systems and Management, Vol. 2, No. 1, pp. 1-18.

223. Myint, S. and Tabucanon, M.T. (1994), "A multiple-criteria approach to machine selection for flexible manufacturing systems". International Journal of Production Economics, Vol. 33, pp. 121-131.

224. Nagabhushana, T.S. and Shah, J. (1999), "Manufacturing priorities and action programmes in the changing environment: An empirical study of Indian industries. International Journal of Operations and Production Management, Vol. 21, No. 4, pp. 516-524.

225. Narain, R., Yadav, R.C., Sarkis, J. and Cordeiro, J.J. (2000), "The strategic implications of flexibility in manufacturing systems". International Journal of Agile Management Systems, Vol. 2, No. 3, pp. 202-213.

226. Narain, R., Yadav, R.C. and Antony, J. (2004), "Productivity gains from flexible manufacturing: Experiences from India", Intemational Journal of Productivity and Performance Management, Vol. 53, No. 2, pp. 109-128.

265

227. Narain, R., Sarkis, J. and Yadav, R.C. (2007), "Investment Justification of Advanced Manufacturing Technology: A Review", International Journal of Services and Operations Management, Vol. 3, No. 1, pp. 41-73.

228. Narasimhan, R. and Das, A. (1999), "Manufacturing agility and supply chain management practices", Production and Inventory Management Journal, Vol. 40, No. 1, pp. 4-10.

229. Narasimhan, R., Swink, M. and Kim, S.W. (2006), "Disentangling leanness and agility: An empirical investigation". Journal of Operations Management, Vol. 24, pp. 440-457.

230. Naylor, J.B., Naim, M.M. and Berry, D. (1999), "Leagility: integrating the lean and agile manufacturing paradigms in the total supply chain". International Journal of Production Economics, Vol. 62, pp. 107-118.

231. Ndubisi, N.O., Jantan, M., Hing, L.C. and Ayub, M.S. (2005), "Supplier selection and management strategies and manufacturing flexibility", Uie Journal of Enterprise Information Management, Vol. 18, No. 3, pp. 330-349.

232. Ngai, E.W.T. and Cheng, T.C.E. (1997), " Identifying potential barriers to total quality management using principal component analysis and correspondence analysis". International Journal of Quality & Reliability Management, Vol. 14 No. 4, pp. 391-408.

233. Nikolenko, A. and Kleiner, B.H. (1999), "Global trends in organizational design". Work Study, Vol. 45, No. 7, 1996, pp. 23-26.

234. Novak, S. and Eppinger, S.D. (2001), "Sourcing by design: product complexity and the supply chain". Management Science, Vol. 47, No.l, pp. 189-204.

235. Nwankwo, S., Obidigbo, B. and Ekwulugo, F. (2002), "Allying for quality excellence: scope for expert systems in supplier quality management". International Journal of Quality & Reliability Management, Vol. 19, No. 2, pp. 187-205.

236. Oertig, M. and Buergi, T. (2006), "The challenges of managing cross-cultural virtual project teams", Team Performance Management, Vol. 12, No. 1/2, pp. 23-30.

237. Ohdar, R. and Ray, P.K. (2004), "Performance measurement and evaluation of suppliers in supply chain: an evolutionary fuzzy-based approach". Journal of Manufacturing Technology Management, Volume 15, No. 8, pp. 723-734.

266

238. Pang, Y., Nee, A.Y.C., Ong, S.K., Yuan, M. and Youcef-Toumi, K. (2006), "Assembly feature design in an augmented reality environment". Assembly Automation, Vol. 26, No.l, pp. 34-43.

239. Pant, S., Rattner, L. and Hsu, C. (1994), "Manufacturing Information Integration Using a Reference Model", International Journal of Operations & Production Management, Vol. 14, No. 11, pp. 52-72.

240. Pellew, M. (1996), "Agile manufacturing - the role of rapid response logistics", lEE Colloquium (Digest), Vol. 179, No. 3.

241. Perdomo-Ortiz, J., Gonza' lez-Benito, J. and Galende, J. (2006), "Total quality management as a forerunner of business innovation capability", Technovation, Vol. 26, No. 10, pp.1170-1185.

242. Petroni, A. and Braglia, M. (2000), "Vendor selection using principal component analysis". Journal of Supply Chain Management, spring. Vol. 36, No. 2, pp. 63-69.

243. Petroni, A. and Rizzi, A. (2001), "Antecedents of MRP adoption in small and medium-sized firms", Benchmarking: An International Journal, Vol. 8, No. 2, pp. 144-156.

244. Petroni, A. and Panciroli, B. (2002), "Innovation as a determinant of suppliers' roles and performances: an empirical study in the food machinery industry", European Journal of Purchasing & Supply Management, Vol. 8, Issue 3, pp. 135-149.

245. Pine II, J.B. (1993), "Mass Customization: The New Frontier in Business Competition ", Harvard Business School Press, Cambridge, MA.

246. Pinochet, A., Matsubara, Y. and Nagamachi, M. (1996), "Construction of a knowledge-based system for diagnosing the socio-technical integration in advanced manufacturing technologies". The International Journal of Human Factors in Manufacturing, Vol. 6, No. 4, pp. 323-349.

247. Power, D.J., Sohal, A.S. and Rahman, S. (2001), "Critical success factors in agile supply chain management: An empirical study". International Journal of Physical Distribution and Logistics, Vol. 31, No. 4, pp. I'M-265.

248. Pozos, A. (1995), "Benchmarking: an overview", Benchmarking of Agility Workshop, Automation and Robotics Research Institute, Fort Worth, TX.

249. Prabhu, V., Appleby, A., Yarrow, D. and Mitchell, E. (2000), "The impact of ISO 9000 and TQM on best practice/performance". The TQM Magazine, Vol. 12, No. 2, pp. 84-91.

267

250. Prajogo, D.I. And Sohal, A.S. (2006), "The relationship between organization strategy, total quality management (TQM), and organization performance—the mediating role of TQM", European Journal of Operational Research, Vol. 168, pp. 35-50.

251. Prajogo, D.I., Laosirihongthong, T., Sohal, A. and Boon-itt, S. (2007), "Manufacturing strategies and innovation performance in newly industrialised countries", Industrial Management & Data Systems, Vol. 107, No. 1, pp. 52-68.

252. Prasad, B. (2000), "Converting computer-integrated manufacturing into an intelligent information system by combining CIM with concurrent engineering and knowledge management", Industrial Management & Data Systems, Vol. 100, No. 7, pp. 301-16.

253. Presley, A., Bamett, W., Liles, D. and Sarkis, J. (1995), "A virtual enterprise architecture", Proceedings of the 4th Agility Forum Conference, Atlanta, GA.

254. Presley, A.R. and Liles, D.H. (2001), "A holon-based process modeling methodology", International Journal of Operations & Production Management, Vol. 21, No. 5/6, pp. 565-581.

255. Presley, A.R., Sarkis, J., Bamett, W. and Liles, D. (2001), "Engineering the Virtual Enterprise: An Architecture-Driven Modeling Approach", International Journal of Flexible Manufacturing Systems, Vol. 13, No. 2, April, pp. 145-162.

256. Prueitt, G.C. (2000), "Case study: US army utility helicopter fleet modernization analysis", The Engineering Economist, Vol. 45, No. 3, pp. 271-289.

257. Pujawan, I.N. and Goyal, S.K. (2005), "Electronic procurement and manufacturing strategic objectives". International Journal of Logistics Systems and Management, Vol. 1, No. 2/3, pp. 227-243.

258. Raisinghani, M.S. and Meade, L.L. (2005), "Strategic decisions in supply-chain intelligence using knowledge management: an analytic-network-process framework". Supply Chain Management: An International Journal, Vol.10, No. 2, pp. 114-121.

259. Ramanathan, R. and Ganesh, L.S. (1995), "Energy resource allocation incorporating quantitative and qualitative criteria: An integrated model using goal programming and AHP", Socio Economic Planning Sciences, Vol. 29, No. 3, pp. 197-218.

260. Ramasesh, R., Kulkami, S. and Jayakumar, M. (2001), "Agility in manufacturing systems: an exploratory modeling framework and simulation". Integrated Manufacturing Systems, Vol, 12, No. 7, pp. 534-548.

268

261. Ramaswamy, N.R., Selladurai, V. and Gunasekaran, A. (2002), "Just-in-Time implementation in small and medium enterprises", Work Study, Vol. 51, No. 2, pp. 85-90.

262. Rangone, A. (1996), "An analytical hierarchy process framework for comparing the overall performance of manufacturing departments", International Journal of Operations and Production Management", Vol. 16, No. 8, pp. 104-119.

263. Rao, K.V.S. and Deshmukh, S.G. (1994), "Strategic Framework for Implementing Flexible Manufacturing Systems in India", International Journal of Operations & Production Management, Vol. 14, No. 4, pp. 50-63.

264. Ravi, V. and Shankar, R. (2005), "Analysis of interactions among the barriers of reverse logistics", Technological Forecasting & Social Change, Vol. 72, No. 8, pp. 1011-1029.

265. Ravi, V., Shankar, R. and Tiwari, M.K. (2005a), "Productivity improvement of a computer hardware supply chain", International Journal of Productivity and Performance Management, Vol. 54, No. 4, pp. 239-255.

266. Ravi, V., Shankar, R. and Tiwari, M.K. (2005b), "Analyzing alternatives in reverse logistics for end-of-life computers: ANP and balanced scorecard approach. Computers and Industrial Engineering, Vol. 48, pp. 327-356.

267. Ryder, R. and Feame, A. (2003), "Procurement best practice in the food industry: supplier clustering as a source of strategic competitive advantage", Supply Chain Management: An International Journal, Vol. 8, No. l,pp. 12-16.

268. Saaty, T.L. (1980), "The Analytic Hierarchy Process", McGraw-Hill, New York, NY.

269. Saaty, T.L. (1996), "Decision Making with Dependence and Feedback: The Analytic Network Process", RWS Publications, Pittsburgh, PA.

270. Sage, A.P. (1977), "Interpretive structural modeling: methodology for large-scale systems", McGraw-Hill, New York, NY, pp. 91-164.

271. Sahay, B.S. (2003), "Supply chain collaboration: the key to value creation". Work study. Vol. 52, No. 2, pp. 76-83.

272. Salvador, F., Forza, C. and Rungtusanatham, M. (2002), "Modularity, product variety, production volume, and component sourcing: theorizing beyond generic prescriptions", Journal of Operations Management, Vol. 20, pp. 549-575.

269

273. Samaddar, S. and Hill, C.A. (2007), "Controlling adverse effect on work in process inventory while reducing machine setup time", European Journal of Operational Research, Vol. 180, pp. 249-261.

274. Sanchez, A. and Perez, M. (2001), "Lean Indicators and Manufacturing Strategies", International Journal of Operations and Production, Volume 21, Issue 11.

275. Sa'nchez-Rodn'guez, C, Dewhurst, F.W. and Marti'nez-Lorente, A.R. (2006), "IT use in supporting TQM initiatives: an empirical investigation". International Journal of Operations & Production Management, Vol. 26, No. 5, pp. 486-504.

276. Sarkis, J. (1999), "A methodological framework for evaluating environmentally conscious manufacturing programs". Computers & Industrial Engineering, Vol. 36, Issue 4, pp. 793-810.

277. Sarkis, J. and Talluri, S. (2000), "A model for strategic supplier selection". In: Leenders, M. (Ed.), Proceedings of the 9th international IPSERA Conference, Richard Ivey Business School, London, Ontario, pp. 652-661.

278. Sarkis, J. (2001), "Benchmarking for agility". Benchmarking: An International Journal, Vol. 8, No. 2, pp. 88-107.

279. Sarkis, J. and Sundarraj, R. P. (2002), "Evolution of Broking: Paradigms in E-commerce Enabled Manufacturing", International Journal of Production Economics, Vol. 75, No. 1/2, pp. 21-32.

280. Sarkis, J. and Sundarraj, R.P. (2006), "Evaluation of Enterprise Information Technologies: A Decision Model Incorporating Strategic and Operational Issues", IEEE Transactions on Systems, Man, and Cybernetics, Part C, Vol. 36, No. 2, pp. 260-273.

281. Sarkis, J. and Talluri, S. (2002a), "A synergistic framework for evaluating business process improvements". International Journal of Flexible Manufacturing Systems, Vol. 14, No. 1, pp. 53-71.

282. Sarkis, J. and Talluri, S. (2002b), "A model for strategic supplier selection", Journal of Supply Chain Management, Vol. 38, No. 1, pp. 18.

283. Sarkis, J. and Talluri, S. (2004), "Evaluating and selecting e-commerce software and communication systems for a supply chain", European Journal of Operational Research, Vol. 159, pp. 318-329.

284. Sarkis, J., Talluri, S. and Gunasekaran, A. (2008), "A Strategic Model for Agile Virtual Enterprise Partner Selection", International Journal of Operations and Production Management, Forthcoming.

270

285. Saxena, J.P., Sushil and Vrat, P. (1990), "The impact of indirect relationships in classification of variables - a MICMAC analysis for energy conservation", System Research, Vol. 7, No. 4, pp. 245-253.

286. Saxena, J.P., Sushil and Vrat, P. (1992), "Scenario building: a critical study of energy conservation in the Indian cement industry", Technological Forecasting and Social Change", Vol. 41, pp. 121-146.

287. Scheer, A.W. (1988), ^^Computer-integrated Manufacturing, Computer Steered Industry", Springer-Verlag, Berlin.

288. Schermerhom, J.R. Jr (1996), "Management", 5* ed., John Wiley & Sons, New York, NY.

289. Schniederjans, M.J. (1995), "Goal Programming Methodology and Applications ", Kluwer Academic Publishers, Boston.

290. Schniederjans, M.J. and Garvin, T. (1997), "Using the analytic hierarchy process and multi-objective programming for the selection of cost drivers in activity-based costing", European Journal of Operation Research, Vol. 100, pp. 72-80.

291. Schonberger, R.J. (1986), "World Class Manufacturing: The Lessons of Simplicity Applied", The Free Press, New York, NY.

292. Selldin, E. and Olhager, J. (2007), "Linking products with supply chains: testing Fisher's model". Supply Chain Management: An International Journal, Vol. 12, No.l, pp. 42-51.

293. Seol, H., Choi, J., Park, G. and Park, Y. (2007), "A framework for benchmarking service process using data envelopment analysis and decision tree". Expert Systems with Applications, Vol. 32, pp. 432-440.

294. Seth, N., Deshmukh, S.G. and Vrat, P. (2006), "A framework for measurement of quality of service in supply chains". Supply Chain Management: An International Journal, Vol. 11, No. 1, pp. 82-94.

295. Seydel, J. (2006), "Data envelopment analysis for decision support", Industrial Management & Data Systems, Vol. 106, No. 1, pp. 81-95.

296. Shamsuzzaman, M., Sharif Ullah, A.M.M. and Bohez, E.L.J. (2003), "Applying linguistic criteria in FMS selection: flizzy-set-AHP approach". Integrated Manufacturing Systems, Vol. 14, No. 3, pp. 247-254.

271

297. Shang, J. and Sueyoshi, T. (1995), "A unified framework for the selection of a Flexible Manufacturing System", European Journal of Operational Research, Vol. 85, Issue 2, pp. 297-315.

298. Sharifi, H. and Zhang, Z. (2001), "Agile manufacturing in practice: Application of a methodology", InternationalJournal of Operations & Production Management, Vol.21,No. 5/6, pp. 772-794.

299. Sharifi, H., Ismail, H.S. and Reid, I. (2006), "Achieving agility in supply chain through simultaneous 'design of and 'design for' supply chain". Journal of Manufacturing Technology Management, Vol. 17, No. 8, pp. 1078-1098.

300. Sharma, H.D., Gupta, A.D. and Sushil (1995), "The objectives of waste management in India: a future inquiry". Technological Forecasting and Social change. Vol. 48, pp. 285-309.

301. Sharp, J.M., Irani, Z. and Desai, S. (1999), "Working towards agile manufacturing in the UK Industry", International Journal of Production Economics, Vol. 62, pp. 155-169.

302. Shim, J.P. (1989), "Bibliographical research on the analytic hierarchy process". Socio-economic Planning Science, Vol. 23, pp. 161-167.

303. Shimizu, K. and Hitt, M.A. (2004), "Strategic flexibility: Organizational preparedness to reverse ineffective strategic decisions", Academy of Management Executive, Vol. 18, No. 4, pp. 44-59.

304. Siemieniuch, C.E., Waddell, F.N. and Sinclair, M.A. (1999), "The role of 'Partnership' in Supply Chain Management for Fast-Moving Consumer Goods: A case study", InternationalJournal of logistics: Research and Applications, Vol. 2, No. 1, pp. 87-101.

305. Singh, M.D., Shankar, R., Narain, R. and Agarwal, A. (2003), "Knowledge management in engineering industries - An Interpretive Structural Modeling", Journal of Advances in Management Research, Vol. 1, No. 1, pp. 27-39.

306. Sinuany-Stem, Z., Mehrez, A. and Hadad, Y. (2000), "An AHP/DEA methodology for ranking decision making units", International Transactions in Operational Research, Vol. 7, Issue 2, pp. 109-124.

307. Sivasubramanian, R., Selladurai, V. and Gunasekearan, A. (2003), "Utilization of bottleneck resources for profitability through a synchronized operation of marketing and manufacturing". Integrated Manufacturing Systems, Vol.14, No. 3, pp. 238-246.

272

308. Skinner, W. (1969), "Manufacturing strategy on the 'S' curve". Production and Operations Management, Vol. 5, No. 1, pp. 3-14.

309. Slagmulder, R. and Bruggeman, W. (1992), "Investment justification of flexible manufacturing technologies: inferences from field research". International Journal of Operations & Production Management, Vol. 12, No. 7/8, pp. 168-86.

310. Small, M.H. (2006), "Justifying investment in advanced manufacturing technology: a portfolio analysis". Industrial Management & Data Systems, Vol. 106, No. 4, pp. 485-508.

311. Smith, R.L. and Wolfe, P.M. (1995), "Implications of client/server systems on the virtual corporation". Computers ind. Engng., Vol. 29, No. 1-4, pp. 99-102.

312. Sofianopoulou, S. (2006), "Manufacturing cells efficiency evaluation using data envelopment analysis". Journal of Manufacturing Technology Management, Vol. 17, No. 2, pp. 224-238.

313. Sohail, M.S. and Hoong, T.B. (2003), "TQM practices and organizational performances of SMEs in Malaysia: Some empirical observations", Benchmarking: An International Journal, Vol. 10, No. l,pp. 37-53.

314. Sohal, A.S. (2000), "Computer integrated manufacturing in the Australian pharmaceutical industry", Integrated Manufacturing Systems, Vol.11, No. 7, pp. 444-453.

315. Sohal, A.S., Moss, S. and Ng, L. (2001), "Comparing IT success in manufacturing and service industries". International Journal of Operations and Production Management, Vol. 21, No. 1/2, pp. 30-45.

316. Soliman, F. and Youssef, M. (2001), "The impact of some recent developments in e-business on the management of next generation manufacturing". International Journal of Operations & Production Management, Vol. 21, No. 5/6, pp. 538-564.

317. Stainer, A., Ghobadian, A., Liu, J. and Stainer, L. (1996), "Strategic investment appraisal for advanced manufacturing technology". International Journal of Materials and Product Technology, Vol. 11 No. 1-2, pp. 76-88.

318. Starr, M.K. (1965), "Modular-production: a new concept". Harvard Business Review, Vol. 43, No. 6, pp. 131-142.

319. Storey, J., Emberson, C. and Reade, D. (2005), "The barriers to customer responsive supply chain management", International Journal of Operations & Production Management, Vol. 25, No. 3, pp. 242-260.

273

320. Stough, S., Eom, S. and Buckenmyer, J. (2000), "Virtual teaming: a strategy for moving your organization into the new millennium", Industrial Management & Data Systems, Vol. 100, No. 8, pp. 370-378.

321. Stratton, R. and Warburton, R.D.H. (2003), "The strategic integration of agile and lean supply", International Journal of Production Economics, Vol. 85, pp. 183-198.

322. Su, J.C.P., Chang, Y.L. and Ferguson, M. (2005), "Evaluation of postponement structures to accommodate mass customization". Journal of Operations Management, Vol. 23, pp. 305-318.

323. Subash Babu, A. (1999), "Strategies for enhancing agility of make-to-order manufacturing system, International Journal of Agile Management Systems, Vol. l,No. 1, pp. 23-29.

324. "Super Decisions", Software for ANP, www.superdecisions.com.

325. Swink, M.L. and Calantone, R. (2004), "Design-manufacturing integration as a mediator of antecedents to new product design quality", IEEE Transactions on Engineering Management, IEEE Transactions, Vol. 51, No. 4, pp. 472 - 482.

326. Swink, M., Talluri, S. and Pandejpong, T. (2006), "Faster, better, cheaper: A study of NPD project efficiency and performance tradeoffs". Journal of Operations Management, Vol. 24, pp. 542-562.

327. Takahashi, K. and Nakamura, N. (2000), "Agile Control in JIT ordering systems". Vol. 2, No. 3, pp. 242-252.

328. Talluri, S., Baker, R.C. and Sarkis, J. (1999), "A framework for designing efficient value chain networks", International Journal of Production Economics, Vol. 62, pp. 133-144.

329. Teng, S.G. and Jaramillo, H. (2005), "A model for evaluation and selection of suppliers in global textile and apparel supply chains", International Journal of Physical Distribution & Logistics Management, Vol. 35, No. 7, pp. 503-523.

330. Thakkar, J., Deshmukh, S.G., Gupta, A.D. and Shankar, R. (2007), "Development of a balanced scorecard: An integrated approach of Interpretive Structural Modeling (ISM) and Analytic Network Process (ANP)", International Journal of Productivity and Performance Management, Vol. 56, No. 1, pp. 25-59.

331. Thompson, R.G., Langemeier, L.N., Lee, C.T., Lee, E. and Thrall, R.M. (1990), "The role of multiplier bounds in efficiency analysis with application to Kansas farming". Journal of Econometrics, Vol. 46, No. 1/2, pp. 93-108.

274

332. Towill, D.R. (1996), "Time compression and supply chain management - a guided tour", Supply Chain Management, Vol. 1 No. 1, pp. 15-27.

333. Towill, D.R. (1997), "The seamless supply chain - the predator's strategic advantage". International Journal of Technology Management, Special Issue on Strategic Cost Management, Vol. 13, No. 1, pp. 37-56.

334. Tracy, M.J., Murphy, J.N., Denner, R.W., Pince, B.W., Joseph, F.R., Pilz, A.R. and Thompson, M.B. (1994), "Achieving agile manufacturing: Part 11", Automotive Engineering, Vol. 102, No. 12, pp. 13-17.

335. Tsuchiya, T. and Tsuchiya, S. (1999), "Policy exercise: An essential enabler of virtual corporation". International Journal of Production Economics, Vol. 60 -61, pp. 221-228.

336. Tu, Y. (1997), "Production planning and control in a virtual one-of-a-kind production company". Computers in Industry, Vol. 34, No. 3, pp. 271-283.

337. Tuma, A. (1998), "Configuration and coordination of virtual production networks", International Journal of Production Economics, Vol. 56-57, pp. 641-648.

338. Underdown, R. and Talluri, S. (2002), "Cycle of success: a strategy for becoming agile through benchmarking". Benchmarking: An International Journal, Vol. 9, No. 3, pp. 278-292.

339. Vandevelde, A. and Dierdonck, R.V. (2003), " Managing the design-manufacturing interface", International Journal of Operations & Production Management, Vol. 23, No. 11, pp. 1326-1348.

340. van Hoek, R.I., Harrison, A. and Christopher, M. (2001), "Measuring agile capabilities in the supply chain", International Journal of Operations & Production Management, Vol. 21, No. 1/2, pp. 126-147.

341. Va'zquez-Bustelo, D. and Avella, L. (2006), "Agile manufacturing: Industrial case studies in Spain", Technovation, Vol. 26, pp.1147-1161.

342. Vokurka, R.J., Choobineh, J. and Vadi, L. (1996), "A prototype expert system for the evaluation and selection of potential suppliers", International Journal of Operations & Production Management, Vol. 16, No. 12, pp. 106-127.

343. von Stackelberg, P. (1993), "Futures benchmarking". Newsletter, Back & Associates, The Woodlands, TX.

275

344. Wang, G., Huang, S.H. and Dismukes, J.P. (2004), "Product-driven supply chain selection using integrated multi-criteria decision-making methodology", IntemationalJournal of Production Economics, Vol. 91, pp. 1-15.

345. Wang, D., Nagalingam, S.V. and Lin, G.C.I. (2007), "Development of an agent-based Virtual CIM architecture for small to medium manufacturers". Robotics and Computer-Integrated Manufacturing, Vol. 23, pp. 1-16.

346. Warfield, J.W. (1974), "Developing Interconnected Matrices in Structural Modeling", IEEE Transcript on Systems, Men and Cybernetics, Vol. 4, No. 1, pp. 51-81.

347. Wasil, E. and Golden, B. (2003), "Celebrating 25 years of AHP-based decision making". Computers and Operations Research, Vol. 30, pp. 1419-1420.

348. Weber, C, Current, J. and Benton, W. (1991), "Vendor selection criteria and methods", European Journal of Operational Research, Vol. 50, No. 1, pp. 2-18.

349. Weber, C.A. and Current, J.R. (1993), "A multi-objective approach to vender selection", European Journal of Operations Research, Vol. 68, Issue 2, pp. 173-184.

350. Weber, C.A. and Ellram, L.M. (1993), "Supplier selection using multi-objective programming: a decision support system approach". International Journal of Physical Distribution & Logistics Management, Vol. 23, No. 2, pp. 3-14.

351. Weber, C.A. (1996), "A data envelopment analysis approach to measuring vendor performance". Supply Chain Management, Vol. 1, No. 1, pp. 28-30.

352. Weber, C.A., Current, J.R. and Desai, A. (1998), "Non-cooperative negotiation strategies for vendor selection", European Journal of Operational Research, Vol. 108, No. 1, pp. 203-223.

353. Webster, M. and Sugden, D. (2003), "Implementation of virtual manufacturing by a technology licensing company", International Journal of Operations & Production Management, Vol. 23, No. 5, pp. 448-469.

354. Webster, M., Sugden, D.M. and Tayles, M.E. (2004), "The measurement of manufacturing virtuality". International Journal of Operations & Production Management, Vol. 24, No. 7, pp. 721-742.

355. Winner, R.I., Pennell, J.P., Bertrend, H.E. and Slusarczuk, M.M.G. (1988), "The role of concurrent engineering in weapons system acquisition", IDA Report R-338, Institute for Defence Analyses, Alexandria, VA.

276

356. Womack, J., Jones, D. and Roos, D. (1990), "The Machine that Change the World", Macmillan, New York, NY.

357. Wong, CM. and Kleiner, B.H. (2001), "Fundamentals of Material Requirements Planning", Management Research News, Vol. 24, No. 3/4, pp. 9-12.

358. Wu, N., Mao, N. and Qian, Y. (1999), "An approach to partner selection in agile maimfacturing", Journal of Intelligent Manufacturing, Vol. 10, pp. 519-529.

359. Xia, W. and Wu, Z. (2007), "Supplier selection with multiple criteria in volume discount environments". Omega, Vol. 35, pp. 494 - 504.

360. Yang, T. and Kuo, C. (2003), "A hierarchical AHP/DEA methodology for the facilities layout design problem", European Journal of Operational Research, Vol. 147, Issue 1, pp. 128-136.

361. Yang, J. (2004), "A procedural approach of inspecting CAD model errors". Engineering Computations, Vol. 21, No. 7, pp. 736-747.

362. Yang, B., Bums, N.D. and Backhouse, C.J. (2004), "Postponement: a review and an integrated framework". International Journal of Operations & Production Management, Vol. 24, No. 5, pp. 468-487.

363. Yauch, C.A. (2007), "Team-based work and work system balance in the context of agile manufacturing", ^pp/jec? Ergonomics, Vol. 38, pp.19-27.

364. Yazici, H.J. (2005), "Influence of flexibilities on manufacturing cells for faster delivery using simulation". Journal of Manufacturing Technology Management, Vol. 16,No. 8, pp. 825-841.

365. Yin, R.K. (1989), "Case Study Research: Design and Methods", Sage Publication, London.

366. Youssef, M.A. (1994a), "Editorial", International Journal of Operations and Production Management, Vol. 14, No. 11, pp. 4-6.

367. Youssef, M.A. (1994b), "Design for manufacturability and time-to-market (Part 1)", International Journal of Operations & Production Management, Vol. 14, No. 12, pp. 6-21.

368. Youssef, M.A. (1995), "Design for manufacturability and time-to-market (Part 2): some empirical findings". International Journal of Operations & Production Management, Vol. 15, No. 1, pp. 6-23.

369. Youssef, M.A., Al-Ghamdi, S.M., Koch, J.V. and Dolan, T. (2006), "Plant location, ISO 9000 certifications and quality management practices: An empirical

277

investigation", International Journal of Quality & Reliability Management, Vol. 23, No. 8, pp. 944-963.

370. Yung, W.K.C. and Chan, D.T.H. (2003), "Application of value delivery system (VDS) and performance benchmarking in flexible business process reengineering". International Journal of Operations & Production Management, Vol. 23, No. 3, pp. 300-315.

371. Yurdakul, M. (2003), "Measuring long-term performance of a manufacturing firm using the Analytic Network Process (ANP) approach. International Journal of Production Research, Vol. 41, No. 11, pp. 2501-2529.

372. Yusuf, Y.Y., Sarhadi, M. and Gunasekaran, A. (1999), "Agile Manufacturing: The drivers, concepts and attributes". International Journal of Production Economics, Vol. 62, Issue 1-2, pp. 33-43.

373. Yusuf, Y.Y., Gunasekaran, A., Adeleye, E.O. and Sivayoganathan, K. (2004a), "Agile supply chain capabilities: Determinants of competitive objectives", European Journal of Operational Research, Vol. 159, No 2, pp. 379-392.

374. Yusuf, Y., Gunasekaran, A., and Abthorpe, M.S. (2004b), "Enterprise information systems project implementation: A case study of ERF in Rolls-Royce, International Journal of Production Economics, Vol. 87, pp. 251-266.

375. Zahedi, F. (1986), "The analytic hierarchy process- a survey of the method and its applications", Interfaces, Vol. 16, pp. 96-108.

376. Zammuto, R. and O'Cormor, E. (1992), "Gaining advanced manufacturing technologies' benefits: the roles of organization design and culture", Academy of Management Review, Vol. 17, pp. 701-28.

377. Zeleny, M. (1995), "Global management paradigm", Human Systems Management, Vol. 14, pp. 191-194.

378. Zhu, Z., Meredith, F.H. and Makboonprasith, S. (1994), "Defining critical elements in JIT implementation: a survey", Industrial Management & Data Systems, Vol. 94, No. 5, pp. 3-10.

278