RedPup Productions 928-422-1000 - Iron Shadowsironshadows.com/IronShadowsArtDiscs.pdfTel: 928-422-1000 ♦♦♦ Fax 480-287-9244 ♦♦♦♦ [email protected] Dog and Cat Designs

Tel: 928-422-1000 ♦♦♦♦ Fax 480-287-9244 ♦♦♦♦ [email protected]

Decorative Ironwork Designs for CNC

60 Classic-style Ironwork Design Patterns

This CD is loaded with intricate ironwork designs that you can use to make above-door breezeways, fireplace screens, wall hangings,

coat racks, key racks, furniture, gates, railings, window grilles, etc.

Includes the following patterns:

• 20 beautiful ironwork panels • 10 half-circle designs • 10 scroll patterns for railings • 10 round scroll pattern designs and rosettes • 10 decorative ironwork wall designs

Decorative

Ironwork at its best!

24 inch tall wall candelabra cut on a

PlasmaCam→→→→

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Did you know that you could remove up to 90% of the smoke from plasma cutting by placing a thin tray of water below your table to extinguish the sparks before they hit the floor and continue burning?

RedPup Productions 928-422-1000


Dog and Cat Designs for CNC

120 Dogs and 20 Cats = 140 Patterns

Create wall hangings, grave markers, refrigerator magnets, signs, etc.

INCLUDES: Afghan Hound,Airedale Terrier,Akita,American Eskimo Dog,American Foxhound,Anatolian Shepherd,Australian Shepherd,Australian

Terrier,Basenji,Basset Hound,Beagle,Bearded Collie,Beauceron,Bedlington Terrier,Belgian Sheepdog,Belgian Tervuren,Black and Tan Coonhound,Black Russian Terrier,Bloodhound,Border Collie,Border Terrier,Borzoi,Boston Terrier,Boxer,Brittany,Bull Terrier,Bulldog,Canaan Dog,Cattle Dog,Chesapeake

Bay Retriever,Chihuahua,Chow Chow,Cocker Spaniel,Corgi,Clumber Spaniel,Curley Coated Retriever,Dachshund,Dalmatian,Dandie Dinmont Terrier,Doberman Pinscher,English Foxhound,English Mastiff,English Springer Spaniel,Field Spaniel,Finnish Spitz,Fox Terrier,French Bulldog,German

Pinscher,German Shepherd,German,Wire-haired Pointer,Golden Retriever,Great Dane,Great Pyrenees,Greater Swiss Mountain Dog,Greyhound,Ibizan,Hound,Irish Setter,Irish Terrier,Irish Wolfhound,Keeshond,Parsons Jack Russell Terrier,Komondor,Kuvasz,Labrador

Retriever,Lhasa Apso,Malamute,Maltese,Manchester Terrier,Mastiff,Miniature Pinscher,Miniature Schnauzer,Newfoundland,Norwegian Elkhound,Norwich Terrier,Nova Scotia Duck Tolling Retriever,Old English Sheepdog,Otterhound,Papillion,Pharaoh Hound,Pit

Bull,Plott,Pointer,Pomeranian,Poodle,Portuguese Water Dog,Pug,Rhodesian Ridgeback,Rottweiler,Saluki,Samoyed,Schipperke,Scottish Terrier,Shar Pei,Shetland Sheepdog,Shiba Inu,Shih Tzu,Siberian Husky,Skye Terrier,Smooth Pointer,St. Bernard,Staffordshire Terrier,Sussex Spaniel,Swedish

Vallhund,Tibetan Mastiff,Tibetan Spaniel,Tibetan Terrier,Toy Fox Terrier,Viszla,Welsh Terrier,Whippet,Wire Fox Terrier,Wire Haired Pointing Griffon

Satisfy the dog and cat fanatics! Use for signs, grave markers, mailboxes, weather vanes, refrigerator magnets,

etc.

Sell at dog shows, pet stores and flea markets.

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting: Did you know that you might become quite popular when others discover that you have a CNC cutting machine?



European-Style Ironwork Designs for CNC

90 Decorative Ironwork Tiles

Europe is well known for it's elaborate architecture and amazing ironwork. There are still many places throughout Europe where the iron railings and gates are over 1000 years old! This handy art disc contains 90 different designs inspired by old-fashioned European ironwork, for use in your CNC projects such as gates, security doors, railings, fence, window grilles, furniture, etc. This disc also includes 10 different shelf bracket patterns as well as the bonus Neuschwanstein Castle pattern.

You can tile the patterns to create decorative panels.

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Did you know that some of our patterns have been cut 4ft tall out of black granite stone inlaid in white granite stone, and set into commercial buildings and sidewalks in some large cities?



Farm and Tractor Designs for CNC

80 Farm and Tractor Patterns

These popular farm theme designs can be used for wall hangings, weather vanes, signs, mailboxes, farm entrances, furniture and

gates.

This original collection includes a selection of modern tractors, antique tractors, harvesters,

livestock, barns, silos, Amish buggies, plows, fence and other farm-related patterns.

Cut these patterns on

your CNC cutting table!

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Did you know that there are almost 2 million farms in the USA? More than 80% are individual family owned.



Game and Fish Designs for CNC

80 Hunting and Fishing Patterns

This game and fish art package has many popular patterns that can be used for wall hangings, gun racks, fishing rod holders, signs,

furniture, targets, key ring holders, etc.

This original collection includes a selection of deer, elk, bighorn sheep, antelope, ducks, geese,

fish, bear, pheasant, turkey quail, boar, grouse, moose, hunters, fishermen, rabbits, etc.

Patterns for the

outdoor sportsman!

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: More than 44 million Americans six years of age and older enjoy fishing every year. An average angler spends $1,046 every year on the sport.



Mimbres Indian-Style Art Designs for CNC

60 Ancient Indian Art Designs These patterns are based upon excavated painted pottery found in

museums and private collections that can be used for amazing security doors, furniture, southwestern gate and fence designs, and

wall decorations.

The Mimbres Indians lived in southwest New Mexico between 300-1300AD. In the last century, thousands of painted ceramic pots have been unearthed, revealing beautiful and mysterious artwork that is both valuable and highly sought after by archaeologists and collectors around the world.

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Did you know the Mimbres Indians disappeared hundreds of years ago? Although there are theories as to their demise, no one is 100% sure what happened to them.



Ocean Life Designs for CNC

60 Ocean Patterns Use to decorate ocean themed rooms in houses, restaurants and

businesses. Excellent for use on signage for aquatic, marine, fishing, and eatery businesses.

This original collection includes a wide selection of ocean life theme designs including

ships, nautical, fish, whales, dolphins, sharks, turtles, anchors, sea shells, islands, lighthouses, palm trees, coral, scuba diver, mermaids and various other sea creatures.

This valuable disc contains ocean art that can make you

money!

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Facts: Did you know that oceans cover nearly 71% of the earth surface? The largest ocean is the Pacific Ocean, which is larger than all land on earth combined.



Rods, Quads, Trucks and Bikes for CNC

100 Vehicle Patterns

Use to decorate rooms in houses. Excellent for use on signage for construction, automotive repair, automotive sales, car clubs,

motorcycle shops, etc.

This original collection includes a selection of modern cars, classic cars, modern trucks, classic trucks, motorcycles, busses, construction equipment (backhoe, scraper, cement truck, dump truck, trackhoe), bicycles, forklift, ATVs, tow trucks, delivery trucks

Cut these

patterns for kids of all ages!

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Did you know that while painted signs can fade in the sun, CNC cut signs can last more than 100 years?



Sports Designs for CNC

100 Sports Patterns and 1 Special Bonus = 101 Patterns

Create wall hangings, weather vanes, refrigerator magnets, signs, etc.

Includes the following sports and activities: Archery, ballet, baseball, basketball, BMX bike, bodybuilding, bowling, boxing, cheerleading, fencing, figure skating, fishing, football, golfing, gymnastics, hockey, horse racing, hunting, hurdle, rollerblading, jogging, kayaking, lacrosse, martial arts, mountain biking, paintball, ping pong, pole vault, racquetball, rock climbing, rugby, skateboarding, ski, snowboarding, soccer, biking, exercise, track and field, volleyball, wakeboard, water-ski, weight lifting, surfing and wrestling.

Special Novelty Bonus! The original "Underwater Basket

Weaving" by Shawn Bulle

This pattern is a great novelty gift that can be sold in curiosity shops, hung in high school and college classrooms, or given to those individuals who don't claim to have any special talent. Now they can take first prize in the most meaningless activity ever!

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Did you know that you need to finely tune cut speed, torch amperage and torch height for each different thickness and type of metal to get that perfect cut? Ideally, after cutting a part, the slag on the metal edges should fall off just by dropping it.



Way out West Designs for CNC

50 Western Silhouettes The CD contains dozens of cowboys and horses as well as

"end of the trail", stagecoach, dreamcatcher, cowgirls, skull, rodeo, ranching, roping, etc.

Our customers use the patterns to create coat racks, lamps, signs, ranch entries, grave markers, napkin holders, cowboy and cowgirl bathroom door signs, key racks, wind chimes, wall hangings, coffee tables, railings, gates, hanging pot and pan racks, light switch plates, mailbox decorations, truck racks, trophies, paper towel holders, etc.

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Cowboy Slang: Onions are “skunk eggs”, Beans are “Pecos strawberries” or “whistle berries” Biscuits are “hot rocks” or “soda sinkers” or “shotgun waddin”, Molasses are “lick” or “larrup” Beef is “slow elk”, Pancakes are “splatter dabs” or “wheelers”, Coffee is “brown gargle”, Gravy is “Texas butter”



Real Western Designs for CNC

50 Western Theme Patterns Realistic designs that can be used for wall decorations, signs,

mailboxes, weather vanes, ranch entries, furniture, grave markers and gates

This original collection includes a wide selection of western art themes including cowboys, Indians, rodeo, ranch, guns, gunfighters, lawmen, lizards, coyote, roadrunner, horse and buggy, wagons, romance, humor, cattle, saloon, kokopelli, buffalo, pistol, and prospector figures and scenes.

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Some of the most popular ways to finish coat silhouette patterns are, spray paint, texture coat, powder coating, acid wash, sand blast, high-heat torch flame coloring and directional sanding. Some people leave the patterns in the rain to get a rust color and then clear-coat. Old-fashioned silver can be achieved by painting a silhouette silver and then faintly brushing black paint over the silver.



Nature and Wildlife Designs for CNC

70 Wildlife Patterns

Awesome nature collection!

This original collection includes a selection of wildlife theme designs including bears, deer, elk moose, ducks, eagles, fish, coyote, fox, bighorn sheep, frog, toad, squirrel, chipmunk, lynx, trees and mountains, etc.

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: Some CNC cutting shops fill all wasted spaces within a pattern with other patterns such as butterflies to reduce the amount metal scrap. They toss the excess patterns such as the butterflies into a bucket to be sold later.



Call to Duty Military Designs for CNC

70 Military Patterns

Loaded with Military Vehicles and Aircraft!

This disc contains a wide assortment of military helicopters, jets, tanks, vehicles and soldiers. As a bonus, the art CD also includes some firefighter, EMS and police patterns.

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies. Interesting Fact: All of our CNC art files load into Ornamental Pro drawing software, so that you can show the customer how the patterns would look incorporated into railings, gates, fence and furniture. www.OrnamentalPro.com



RedPup Productions has been providing quality CNC artwork for CNC cutting machines for the past

decade.

Order anytime online at http://www.redpup.com

or Call 928-422-1000

In a hurry? You may request a download to use until your discs arrive!

Price List Good through 12/31/2013

Part # Description Price DID Decorative Ironwork Designs for CNC $98.00 DOG Dog and Cat Designs for CNC $98.00

DUTY Call to Duty Military Designs for CNC $98.00 ESID European-Style Ironwork Designs for CNC $98.00

FARM Farm and Tractor Designs for CNC $98.00 GAME Game and Fish Designs for CNC $98.00 MISA Mimbres Indian-style Art Designs for CNC $98.00

OCEAN Ocean Life Designs for CNC $98.00 RODS Rods, Quads Trucks and Bikes for CNC $98.00

SPORTS Sports Designs for CNC $98.00 WAYWEST Way Out West Designs for CNC $98.00

WEST Real Western Designs for CNC $98.00 WILD Nature and Wildlife Designs for CNC $98.00

Compatibility: These patterns are cut on PlasmaCAM, Torchmate, Samson, PracticalCNC, DynaTorch, Vicon, Tracker CNC plasma cutting machines along with Omax water-jet and a wide variety of plasma, laser, water-jet, router and vinyl cutting systems. Also loads in Mach2, winCNC, AutoCAD and other CAD software programs. PlasmaCAM, Torchmate, PracticalCNC, Samson, DynaTorch, Vicon, Tracker CNC, Mach2, AutoCAD and winCNC are trademarks of their respective companies. We are NOT affiliated with any of these companies.

RedPup Productions 928-422-1000 http://www.ironshadows.com

Documents

RedPup Productions 928-422-1000 - Iron Shadowsironshadows.com/IronShadowsArtDiscs.pdfTel: 928-422-1000 ♦♦♦ Fax 480-287-9244 ♦♦♦♦ [email protected] Dog and Cat Designs