127INNOVATIVE SOLUTIONS IN PLASTIC

CONTACT US TODAYCDN 1 800 667 0999 USA 1 866 733 2684

www.redwoodplastics.com

SINCE 1971

Member of

Redco™ ACRYLIC

Redco™ ACRYLIC

Redco™ Acrylic sheet products are of the highest quality with tight thickness tolernances. Redco™ Acrylic offers an economical and longer lasting alternative to glass with its high optical characteristics and low stress levels.

STANDARD COLOR: Clear Only*

STANDARD SHEET SIZE: 48” x 96”STANDARD SHEET THICKNESS: 0.118” > 0.500”

* Extruded Profiles

* Extruded Round Tube

* Extruded Square Tube

* Clear Cast Round Rod and Shapes

*Custom Sizes Available on Request*Minimums May Apply to Any Non Stock Items

Redco™ Acrylic Cylinders

CDN 1 800 667 0999 www.redwoodplastics.com US 1 866 733 2684

Redco™ ACRYLIC

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products, whether alone or in combination with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products, whether used alone or in combination with other products. For most recent technical information, phone in USA or in Canada.

MOLDING GRADEPROPERTY ASTM or UL TEST CAST SHEET STANDARD

THERMALCOEFFICIENT OF THERMAL EXPANSION(105 in/in-ºC)

D696 3.9 3.6

DEFLECTION TEMPERATURE, ºF

D648

AT 264 psi 200-215 198

AT 66 psi 225 214

ELECTRICAL

DIELECTRIC STRENGTH (V/mil) SHORT TIME, 1/8-in thk)

D149 500 500

DIELECTRIC CONSTANT D150

AT 1 kHz 3.3 3.3

AT 1 MHz 2.5 2.3

DISSIPATION FACTOR D150

AT 1 kHz 0.04 0.04

AT 1 MHz 0.02-0.03 0.02-0.03

VOLUME RESISTIVITY (ohm-cm) AT 73F, 50% RH

D257 >1017 >1017

ARC RESISTANCE (s), 120 mils

D495 No track No Track

OPTICALREFRACTIVE INDEX D542 1.49 1.49

TRANSMITTANCE, % D1003 92 92

PHYSICALSPECIFIC GRAVITY D792 1.19 1.19

SPECIFIC GRAVITY (in3/lb) D792 23.3 23.3

WATER ABSORPTION, 24 h, 1/8-in thk, %

D570 0.2 0.3

MECHANICAL

TENSILE STRENGTH, psi D638 10,500 10,500

ELONGATION, % D638 5 5

TENSILE MODULAS (105 psi) D638 4.5 4.3

FLEXURAL SRENGTH, psi D790 16,500 16,000

FLEXURAL MODULUS (105 psi)

D790 4.5 4.5

IMPACT STRENGTH, IZOD (ft-lb/in of notch)

D256 0.4 0.4

HARDNESS, ROCKWELL M D785 M100-102 M95

CDN 1 800 667 0999 www.redwoodplastics.com US 1 866 733 2684

Nominal Thickness

Standard Sizes in Inches

48x72 48x96* 51x100 60x72 60x96

.080 +.007 +.007 +.007 +.007 +.007

-.009 -.009 -.009 -.009 -.009

.100 +.008 +.008 +.008 +.008 +.008

-.011 -.011 -.011 -.011 -.011

.125 +.014 +.014 +.014 +.014 +.014

-.012 -.012 -.012 -.012 -.012

.187 +.009 +.009 +.009 +.009 +.009

-.009 -.009 -.009 -.009 -.009

.118 (3mm)

.177 (4.5mm)

.236 (6mm)

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

Nominal Thickness

Standard Sizes in Inches

63x100 72x96 75x51 75x63 75x100

.080 +.007 +.007 +.007 +.007 +.007

-.009 -.009 -.009 -.009 -.009

.100 +.008 +.008 +.008 +.008 +.008

-.011 -.011 -.011 -.011 -.011

.125 +.014 +.014 +.014 +.014 +.014

-.012 -.012 -.012 -.012 -.012

.187 +.009 +.009 +.009 +.009 +.009

-.009 -.009 -.009 -.009 -.009

.118 (3mm)

.177 (4.5mm)

.236 (6mm)

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

±.3mm±.22mm±.3mm

Redco™ EXTRUDED ACRYLIC THICKNESS TOLERANCES

Redco™ EXTRUDED ACRYLIC

*Only Stocked Item Non-Stocked Sheet May Require Minimums.

CDN 1 800 667 0999 www.redwoodplastics.com US 1 866 733 2684

Redco™ ACRYLIC

Redco™ MIRRORED SHEET

Redco™ Mirrored Sheet has the industries toughest protective back-coating, which protects against scratching during fabrication. This durable acrylic mirror is ideal for all type of projects including areas where safety or vandalism are concerns, point-of-purchase displays, casinos, children’s toys, cosmetic displays and for applications in the food service industry.

Redco™ Mirrored Sheet is half the weight of glass and 43% the weight of aluminum, while being eight times stronger. It is weather and fade resistant and can be drilled, sawed and cemented.

STANDARD COLOR: Clear Mirrored Acrylic Sheet (Silver)

STANDARD SHEET SIZE: 48” x 96”, 48” x 48”, 24” x 48”, 24” x 24” and 12” x 24” sheets.Custom sizes are available.

TYPICAL APPLICATIONS: Service station facilities, point-of-purchase displays, dance studios, interior decorating, casinos, children’s toys, cosmetic displays and for applications in the food service industry.

Redco™ CONVEX MIRRORS

Redco™ Convex Mirrors prevents accidental collisions by allowing the viewer to see around corners, in large warehouses or small hallways, as well as increasing a viewers area of sight enabling the surveillance of a larger area thereby discouraging theft and vandalism.

Redco™ Convex Mirrors are constructed of tough, lightweight, shatter-resistant acrylic with durable mirror finish for clear visibility.

Easy installation for indoor applications.