accessories.ford.com

Yakima Racks & Carriers

Racks & Carriers by Yakima®

Get ready for your next adventure

Base Racks – Start With A Solid FoundationRoof Rack and Crossbar SystemRoof rack system for vehicles with bare roofs. Features pitch and tow adjustments for the perfect fit on your vehicle roof and attaches to the vehicle with vehicle-specific base clips.

• Secure, easy-to-use tower specifically designed for vehicles without roof rails or gutters

• Advanced tower architecture is sleek, strong and quiet• Tri-axial clip adjustment easily adjusts to a wide range

of roof shapes for safe, secure hold• 12° of pitch adjustment helps optimize tower position

and level bars on rounded roofs• Maximum load rating of 165 lbs, depending on vehicle

and bar rating• Easily locks to your vehicle with our SKS (Same Key System)

locks (sold separately)

Crossbars for Vehicles with Raised Side RailsRoof rack system for vehicles with raised side rails. Attaches to the vehicle with integrated steel bands that wrap around the side rails.

• Advanced tower architecture is sleek, strong and quiet• Strong, durable stainless-steel strap to accommodates

a range of rails• Maximum load rating of 165 lbs, depending on vehicle

and bar rating• Easily locks to your vehicle with our SKS system

(sold separately)

Adjustable Bed RackThe HD adjustable truck bed rack brings best-in-class payload and unmatched versatility. Features 19"- 30" adjustability and multiple built-in tie-downs.

• Adjustable height from 19" - 30" to create custom set-ups for maximum utility and versatility

• Maximum capacity – 300 lbs• Built to last with engineered aluminum construction

and a durable powder-coat finish• Compatible with all Yakima carriers including kayaks,

surfboards, bikes, rooftop tents and more • Integrated tie-down points help easily secure any load• T-slot attachments make adding gear mounts and

accessories fast – and simple• Integrated SKS locks to secure your rack system to

the truck bed

Roof Rack and Crossbar System

Adjustable Bed Rack

Please check your Owners Guide for your vehicle's roof rack capacity.

Crossbars for Vehicles with Raised Side Rails

2

Yakima Racks & Carriers

Kayak Carrier and O.E. Crossbars

Low-Profile Bed Rack

3

Low-Profile Bed RackSleek and strong, the Low-Profile Bed Rack’s design allows the use of any Yakima carrier while preserving valuable bed space.

• Easy to reach low profile height position makes it easy to rack out and reach gear

• Maximum capacity – 300 lbs• Simple, tool-free attachment makes installation, removal

and crossbar spread adjustments a breeze• Built to last, with engineered aluminum construction and

durable powder-coat finish• Integrated tie-down points on endcaps make securing

any load quick and simple• T-slot attachments make adding gear mounts and

accessories fast and easy• Integrated SKS locks secure the rack system to

the truck bed

Base Racks (Continued)

4

Adjustable Bed Rackwith Cargo Box

Medium Profile Bed Rack

Medium-Profile Bed RackDesigned to handle heavy loads on backcountry terrain, our Medium-Profile Bed Rack is built for rugged overland adventures. Features multiple tie-down points to make securing nearly any load easy.

• Fixed height position of 13" provides easy gear access and a low center of gravity

• Maximum capacity – 300 lbs• Built to last with engineered aluminum construction

and durable powder-coat finish• Compatible with all Yakima carriers including kayaks,

surfboards, bikes, rooftop tents and more• T-slot attachments make adding gear mounts and

accessories fast and simple• Integrated SKS locks secure your rack system

to the truck bed

Yakima Racks & Carriers

Bed Rack for Embark LS Tonneau/Bed Covers

Hitch-Mounted Rack Extension5

Bed Rack for Embark LS Tonneau/ Bed CoversIf your truck is equipped with an Embark LS Tonneau/Bed Cover, we offer bed rack systems that allow full use of the cover and convenient mounting of your gear carriers.

• Engineered to work seamlessly with our Adjustable or Medium-Profile truck bed rack systems for Ranger, F-150 and SuperDuty®

• Securely carry 300 lbs of gear• Built to last, with aluminum and corrosion-resistant hardware • Integrated SKS locks to secure your rack system to the

tonneau cover

Hitch-Mounted Rack ExtensionThe Hitch-Mounted Rack Extension easily extends the length of any truck bed up to 4 feet. Light and strong, this aluminum hitch mounted rack is the ideal solution for hauling fishing kayaks, boards, lumber, ladders and more.

• Provides 4 feet of additional truck bed length with a 60" wide crossbar

• Adjustable to three load-carrying positions: • Bed height for use when your truck tailgate is open (300 lbs

carrying capacity) • Bed rail height for use with our Low-Profile Bed Rack system

or a tonneau cover (300 lbs carrying capacity) • Truck cab height by combining the Extension with a roof

rack system (165 lbs carrying capacity) (sold separately) • Installs easily and securely to any 2" hitch receiver using the

included 5/8" threaded hitch bolt• Integrated tie-down points ensure a secure ride for your fishing

kayak, canoe, ladders, lumber and more • Add any Yakima boat mount to the crossbar for

added boat protection

6

Bike Carriers & Adapters – Ride On

Hitch-Mounted Bike Rack, Tilt, Holds 2 Bikes

Hitch-Mounted Bike Rack, Tilt, Holds 4 Bikes

Upright Rack Mount Bike CarrierOur Upright Rack Mount Bike Carrier securely carries 1-bike. For use with Yakima or O.E. crossbars, it can be paired up with other Yakima carriers (or a second bike rack) for maximum cargo-carrying flexibility. Locks to roof or bed rack with SKS Lock Cores (sold separately).

• Zero contact with frame to help protect carbon fiber and custom paint jobs

• Accommodates disc brakes, thru axles, and full suspension bikes

• Holds bike upright while you secure the bike to the mount • No tools or assembly required • Fits 20" to 29" wheels with tire widths up to 3" • Fits bikes with up to a 48" wheelbase• Minimum and maximum crossbar spreads: 16"- 48"

Hitch-Mounted Bike Rack, Tilt, Holds 2 BikesBuilt to handle newer bikes with fat tires and boost hubs, but it easily carries the classics too. This tray-style carrier features StrongArm™ hooks to secure the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access.

• Hitch mounted tray rack that loads quickly and carries two bikes without frame contact

• Easy-access tilt mechanism make raising and lowering the rack a breeze, even with bikes loaded

• Tool-free locking SpeedKnob™ makes installation and removal fast, easy and secure

• Easily adjust trays to reduce bike-to-bike interference• Fits most bikes and accommodates disc brakes, through

axles, boost hubs, and full suspension bikes• Fits 20" to 29" wheel sizes and tires up to 4.8" wide• Integrated SKS (Same Key System) locks included for

added bike security

Hitch-Mounted Bike Rack, Tilt, Holds 4 BikesThis cradle-style bike rack carries up to four bikes. UpperHand™ control lever tilts the rack to make access to your vehicle a cinch. Also includes ZipStrips™ to secure your bikes, folds flat for easy storage and comes fully-assembled right out of the box.

• UpperHand™ lever tilts rack down for vehicle access and folds it flat for storage

• Tool-free SpeedKnob™ quickly tightens and locks the rack to your vehicle

• Anti-sway cradles help minimize bike-to-bike contact• Carries up to 4 bikes

Upright Rack Mount Bike Carrier

Yakima Racks & Carriers

7

Hitch-Mounted Bike Rack, Swing, Holds 4 BikesThis swing-away, cradle-style carrier features ZipStrips™ and fully padded arms. One touch is all it takes to unlock the swing-away feature for easy access to the rear of your vehicle whenever you need.

• Swings away from car with bikes loaded to provide easy access to rear of vehicle

• Tool-free installation with locking SpeedKnob™ • Zero-hassle ZipStrips quickly secure bike to rack • Fully padded arms for the ultimate in bike protection • Arms fold down when not in use • Integrated SKS (Same Key System) locks included

for added security • Carries up to 4 bikes

Tailgate Bike CarrierThe Tailgate Bike Carrier is great for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight™ bike cradles add extra stability and protection for your bikes.Tailgate pad for your truck that securely carries your bikes to the trailhead and HindSight™ tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top.

• NEW cradle closure system is easy on carbon bike frames and painted surfaces

• Integrated strap management system keeps the pad tight and secure on the way up the mountain

• 53" width carries up to 5 bikes

Hitch Swing AdapterThe Hitch Swing Adapter turns your hitch carrier into an easy-to-use, swing-away rack that locks up tight while you’re on the road. It works seamlessly with most 2" bike racks to let you swing your fully loaded rack out of the way so you can easily get into the rear of the vehicle.

• Hitch extension converts most 2" hitch products to a swing-away rack

• Provides easy tailgate access – even with a rack fully loaded with bikes

• Easily swings open 90 degrees and locks in place with the simple to use release lever

• Safety latch secures the rack closed while you’re on the road• Secures to any 2" hitch receiver using a threaded pin• Included SKS (Same Key System) lock helps keep

the rack secure• 250 lb. maximum load capacity (rack plus gear)

Hitch-Mounted Bike Rack, Swing, Holds 4 Bikes

Tailgate Bike Carrier

Hitch Swing Adapter

Watersports Carriers & Adapters – Making a Big Splash

Kayak Carrier with Load Assist

Kayak Carrier

8

Paddleboard Carrier with LocksA stand-up paddleboard carrier holds two SUP Boards up to 36" wide. The Paddleboard Carrier is fully assembled out-of-the-box, features integrated rollers for easy loading and includes SKS locks to secure both the racks and boards.

• Includes everything needed to carry up to 2 SUP boards • Integrated rollers for easy loading of oversized SUP boards • Fits Yakima or O.E. crossbars • Slider adjusts to boards up to 36" wide • Soft padding cradles and protects boards • Integrated strap management stows straps during travel • Minimum crossbar spread of 24" or more

Kayak Carrier with Load AssistThe first load-assist mount to handle both SUPs and kayaks, makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle.

• Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism

• 80 lb. capacity easily handles a large kayak or two boards • Provides 30-45% weight assistance (depending on boat width) • Felt-covered cradles flex to conform to hull for secure transport,

tie down straps included• Locks to base rack with SKS Lock Cores for added security

(sold separately) • Minimum Crossbar Spread: 24"• Requires 3.5" of crossbar overhang past the tower, will not

work with O.E. Crossbars

Kayak CarrierWith multiple settings, our Kayak Carrier allows you to carry one boat in J-Cradle position, two boats in vertical, stacker position plus folds down when not in use.

• Fully assembled out of the box, tool-free installation• Fits Yakima or O.E. crossbars• Adjust the upright position with the easy-to-use

integrated cam lever • Folds flat when not in use • Includes Heavy-Duty Straps and Bow/Stern Tie-Downs • Supports one boat up to 80 lb or two boats with combined

weight of 110 lbs or less • Minimum crossbar spreads of 24" or more

Paddleboard Carrier with Locks

Yakima Racks & Carriers

9

• Includes canoe securing straps and bow/stern tie-downs – everything needed for a single canoe

• Durable over-molded rubber cushions the canoe gunwale while providing stability

Canoe Carrier

Adjustable Bed Rack with Kayak Carriers

Canoe CarrierThis Canoe Carrier attaches directly to any Yakima or O.E. roof rack for a quick, tool-free assembly, right out-of-the-box. The unique design attaches to round, square, aerodynamic and factory bars with a single tightening knob. Easy, tool-free installation.

• Dual bolts included to ensure an integrated fit to vehicle

• Rubber padding protects your crossbars from damage or corrosion

• Minimum Crossbar Spread: 24"

Snowsports Carriers & Adapters – Slipping & Sliding

10

Hitch-Mounted Ski /Snowsport CarrierConvert your cradle-style hitch bike carrier into a ski and snowboard carrier with ease. Features 2-position upper arms and adjustable lower arms to accommodate various skis and boards. Its soft, flexible rubber padding helps protect your gear for many winters of use.

• Does not include the hitch-mount bike rack (sold separately) • Fits Yakima 4-bike mast-style hitch racks • Carries up to 6 pairs of skis or 4 snowboards • SKS Lock Cores included to secure your gear

Rack-Mounted Snow/Snowsport CarrierWide enough to carry six pairs of powder skis – up to 136 mm at the tip – or four snowboards. Integrated SKS (Same Key System) locks are built in for added security, and the mirror black finish looks awesome on your roof.

• Aerodynamic design delivers a quiet ride and streamlined good looks

• Universal mounting system works with Yakima or O.E. crossbars

• Integrated SkiLift™ provides clearance for tall bindings • DoubleJoint™ hinge expands for easy use with thick

skis and boards • For easier access to skis and snowboards, the OverHang™

clamp-mounting position shifts the mount further out on your vehicle’s roof rack

• Large button makes it easy to open with gloves or mittens on

Hitch-Mounted Ski/Snowsport Carrier

Rack-Mounted Snow/ Snowsport Carrier

Yakima Racks & Carriers

Awning & Tents – Set Up Camp AwningOur Awning helps provide excellent protection from the sun or a sudden shower. It mounts easily to the side of your base rack and only takes up six inches of bar space. Just pull it out window-shade style and insert the poles when you get to camp.

• Fits Yakima or O.E. roof racks• Provides 42 square feet of sun and weather protection • Easy to pitch – just pull it out, prop it up and settle in • Integrated SKS (Same Key System) locks included for added security • Minimum Crossbar Spread: 24"

2-Person Tent (Green)Our Tent is constructed of light and breathable 210D nylon with mesh panels for ventilation. The weather-shedding rainfly has a water-resistant coating and for warm, clear evenings, leave it off for faster set-up and a wide-open view.

• Easy to pitch design means less work and more play • Thick, 2.5" wall-to-wall foam mattress includes a removable cover

for easy cleaning • Made from the same lightweight and breathable materials

as backcountry tents - 210D nylon • All windows and skylight have solid and mesh panels

that zip open for ventilation• Aluminum poles are light, strong and pre-set to make

pitching a breeze • Integrated SKS (Same Key System) locks included for added security • Ladder and all hardware are included for easy set up• For use with Yakima truck bed racks and Expedition Heavy-Duty

Crossbars only

2-Person Heavy-Duty TentThis four-season rated Heavy-Duty Tent provides the ultimate mobile base camp for any season. Constructed of 600D Ripstop polyester fabric and a 3000 mm waterproof PU coating. Paired with the weather-shedding water-resistant rainfly, you’re set for excellent protection against the elements.

• Large doors, windows and skylights have solid and mesh panels that zip open for ventilation

• Easy to pitch design means less work and more play • Thick, 2.5" wall-to-wall foam mattress includes a removable cover

for easy cleaning • Rainfly features 210D Ripstop Polyester, 3000 mm PU

water-resistant coating• Guy lines and D-rings on the tent floor allow you to tie down

the tent in windy conditions • Abrasion-resistant tent floor with textured finish helps

provide added durability• Ladder has mid-height adjustment points for easy set-up,

and the auto-close feature makes it a snap to close• Integrated SKS (Same Key System) locks included for

added security• For use with Yakima truck bed racks and Expedition Heavy-Duty

Crossbars only

Awning

2-Person Tent

2-Person Heavy-Duty Tent11

12

Cargo Box & Cargo Baskets – Load Up and Carry OnCargo Box – 16 cu.ft.Carry your gear on the roof with this sleek and aerodynamically designed Cargo Box. The aesthetically-pleasing shape also contributes to minimized wind noise. Internal lid stiffeners add rigidity while the SuperLatch™ helps ensure your lid is secure to its base, and your gear is safe.

• No assembly required • Fits Yakima or O.E. crossbars • Dual-sided opening for easy access on either side of your vehicle • Tapered design reduces hatch interference • Hauls gear for up to 3 campers; fits snowboards and skis

up to 185cm • Integrated SKS (Same Key System) locks are built in

for added security • Minimum and maximum crossbar spreads: 24" - 36"

Rack-Mounted Basket – SmallThis narrow basket is built from rugged, weather-resistant steel. It includes a fairing to reduce drag and wind noise. This is a sleek, load-and-go option for any multisport rooftop system. Use it to haul coolers, backpacks, duffel bags or even golf clubs.

• Weather-resistant, heavy-duty steel construction for years of rugged use

• Narrow profile leaves room on bars for bikes, boats, boards or one of our tent offerings

• Easy to mount and remove — no tools required• Custom fairing included for reduced drag and wind noise

Rack-Mounted Basket – Medium Built to haul coolers, duffels, camping gear and more, the quick-release mounting system makes it super simple to install. Plus, it includes adjustable accessory bars for adding Yakima gear mounts to carry bikes, boats and boards on top.

• Medium sized cargo basket with a clean, modern design • Adjustable accessory bars for adding Yakima gear mounts

and pinning in bulky items • Tool-free mounting hardware for easy install right out

of the box • Integrated fairing reduces wind noise and drag • Made from strong, durable steel for years of

rugged use • Add SKS (Same Key System) locks for

added security (sold separately)

Roof Rack and Crossbar System

Small Rack-Mounted Basket

MediumRack-Mounted Basket

Yakima Racks & Carriers

13

Rack-Mounted Basket – Extra-Large – with Cargo NetIf you’ve got an extra-large vehicle, extra-large friends or both, this Cargo Basket will round out your extra-large lifestyle. Featuring heavy-duty construction and a wide body, the Extra-Large Cargo Basket fits just about any gear you can pack into it.

• Quick installation and minimal assembly required • Accommodates most Yakima gear mounts for all

your outdoor activities • Weather-resistant heavy-duty steel construction • Best for larger vehicles like trucks, SUVs, and off-roaders • Custom wind fairing included for extra noise reduction • Minimum Crossbar Spread: 30" • Maximum Crossbar Spread: 38"

Rack-Mounted Basket Light BracketsThese brackets come in pairs and mount to the Extra-Large Cargo Basket. They are constructed of heavy-duty powder coated steel and can accommodate aftermarket off-road lights of virtually any size or shape.

• Two brackets mount on front or rear of your Extra-Large Cargo Basket

• Heavy-duty powder coated steel construction • Can carry two lights of virtually any size

and shape

Extra-Large Rack-Mounted Basket

Light Brackets (lights not included)

Rack-Mounted Basket Light Brackets

14

Rack Accessories – Handy ExtrasSKS (Same Key System) LocksThese 4 cores enable you to lock all of your Yakima products with just one key.

• Fits all lockable Yakima Rack & Carrier accessories• Includes 4 SKS Cores and matching keys • 4 keys included plus a control key • Core numbers included in prepackaged locks cannot

be specified

Telescoping Side BarsThese heavy-duty Telescoping Slide Bars increase the utility of your Yakima truck bed rack system with more carrying space. Available in two size options and a telescoping design, they’re always a perfect fit. The full-length T-slot and 100 lb capacity make it easy to attach more accessories and gear.

• Fully adjustable, heavy-duty side rails attach to Yakima truck bed racks

• Customizes Yakima truck bed racks by expanding gear-carrying capacity

• Engineered aluminum construction delivers serious strength without weighing things down

• Holds up to 100 lbs of gear and accessories — great for heavy items like fuel and water

• Integrated T-slot makes it easy to attach and remove Yakima truck accessories

• Adjustable from 60-84" (Long) or from 36-64" (Short)• Sold in sets of two

RotopaX™ Mounting KitThe RotopaX™ Mounting Kit adapts the RotopaX™ mounting system for out truck bed rack HD Crossbar or accessory Telescoping Side Bars. Now you can attach up to 40 lbs of RotopaX™ water and fuel packs with our easy-to-install kit.

• Corrosion-resistant steel hardware is durable and withstands wear-and-tear from weather

• Attaches to Telescoping Side Bars or the HD Crossbars or other T-slot style crossbars with the truck bed racks

• 40 lb on-road / 25 lb off-road capacity• Includes parts for one RotopaX™ mount

Same Key System Locks

Telescoping Side Bars with Adjustable Bed Rack

RotopaX™ Mounting Kit

Yakima Racks & Carriers

15

Eye BoltsThese Eye Bolts integrate seamlessly with most T-slot crossbars, to create instant tie-down points for securing gear. They’re secure, strong and easy to install — just drop them into the slot and twist into place.

• Rugged steel construction with durable black corrosion resistant finish for many years of use

• Includes hardware for both HD Crossbar and standard T-slot crossbars

• Handles up to 250 lbs on our HD Crossbars, and up to 165 lbs on other Yakima T-slot crossbars

• Set of two

Heavy-Duty Hook StrapHeavy-Duty Hook Straps deliver maximum strength with a proven hook attachment to easily hold larger cargo in place. Designed to work with Yakima Eye Bolts and integrated attachment points on our truck bed rack systems. These straps are quick and easy to adjust — load and go!

• Our proven Heavy-Duty Straps with durable, vinyl-coated hooks

• Easily attach to our Eye Bolts, or other tie-down points, for a secure hold

• 10-ft. length handles a wide range of gear and supplies• Set of two

Eye Bolts

Recovery Track Mount

Recovery Track MountThe Recovery Track Mount is a smart, quick, secure way to keep recovery tracks on hand and within reach. Now you can deploy them whenever you need traction. Easy to install and use, this mount is designed to work with the Telescoping Side Bars along with most other T-slot crossbars.

• Holds up to four aftermarket recovery tracks • Durable molded base is built for rugged

travel in a range of conditions• Tracks stay secure with Yakima

Heavy-Duty Straps for a confident hold on rugged terrain

• Requires 20" - 35" (49-89 cm) crossbar spread range (unless paired with Telescoping Side Bars)

• 35 lbs load capacity

Heavy-Duty Hook Strap

Ford Licensed Accessories (FLA) are fully designed and developed by the accessory manufacturer and have not been designed or tested to Ford Motor Company engineering requirements. Contact your local Ford Dealer for details and/or a copy of all limited warranties.

Ford Accessories reserves the right to change product specifications and availability at any time without incurring obligations. Please refer to the Ford Accessories Website (www.accessories.ford.com) for the most current, up-to-date information.

Maximum capacities identified in this brochure may be different than your vehicle's roof rack capacity. Please check your Owners Guide for your vehicle's maximum roof rack capacity.

June, 2020 ABT-4664 © 2020, Ford Motor Company

accessories.ford.com

Load StopsBuilt with the strength to keep heavy loads in place, our steel, T-slot Load Stops integrate with our new truck bed HD Crossbars, and most T-slot crossbars. The Load Stop quickly installs into the T-slot and adjusts with the turn of a knob and includes integrated tie-down points to makes it easy to secure lumber, ladders, canoes and more.

• Simple, tool free adjustment is done with the turn of a knob• Built in tie-down points make it easy to secure gear• Set of four

Tool HolderGet your axes and shovels out of the backseat and up on top where they belong. Easy to use and super secure, the TopGrip OG is a smarter way to carry your long-handled gear. Attach it to your Crossbars, then secure your gear in the padded clamps. This accessory carries one axe, shovel or paddle up and out of the way.

• Double-padded clamps deliver a super tight hold without damaging your gear

• Carries items up to 9 lbs • Easily attaches to crossbars • Sold as a pair to carry one axe, shovel, paddle or

other long item

Load Stops

Tool Holder

Rack Accessories (Continued)