Embed Size (px)
Citation preview
The Quikstak S10 Series is a range of semi-electric pal-let stackers, the successor to our popular A1010range. The S10 combines effortless maneuverabilitywith a one-tonne capacity and 1600mm lift height;optionally increased to 2500mm or 3000mm. Like allQuikstaks the S10 can be supplied with Quickstak’sproprietary ‘magic-eye’ sensor system, which automat-ically adjusts the forks to maintain an ergonomic workheight as product is stacked or destacked.
The S10 is now supplied as standard with a single'easy-roll' nylon steered wheel, which provides excel-lent directional control and creates a triangle of sur-face-contact points – ideal for use on uneven surfacesor outdoors. Both the forks and straddle legs arewidth-adjustable, allowing the S10 to handle verylarge pallets and crates.
Under the covers, the S10 is fitted with a 24v/120Ahsealed gel battery, electronic controller and ultra-reli-able hydraulic mechanism. The raise/lower controls, E-stop, battery indicator, key switch and hour-meter arelocated in a small fascia panel.
The Quikstak S10 complies with a range of interna-tional quality and safety standards, and is manufac-tured in an ISO 9000 certified plant. It is the onlysemi-electric pallet stacker available which has beenspecifically optimised for Australasian conditions.
Quikstak™ S10 SeriesSemi-electric pallet stackers with 1-tonne capacity
Standard lift height 1600mm,optionally 2500mm or3000mm
1000kg rated load capacity
Built-in limit switchand overloadprotection valve
Manufactured and certified tointernational quality assuranceand safety standards:- Confor-mité Européene- EN ISO3691-1:2012-EN1175-5:1998/A1:2010-EN16307-1:2013- Based on di-rective 2006/42/EC- EN12895:2000- Based on Directive2004/108/EC- IQNet / CQC /CNAS
Optional 'magic-eye' infraredload height adjustment for er-gonomic stacking
Forged forks withadjustable width from295mm-930mm
24V / 120Ah battery withbuilt-in charger
Straddle legs with ad-justable width from1132mm-1532mm, idealfor tight warehouse aisles
Large-diameter steeredrear wheel for easy move-ment on any terrain
Electronic control unit
Fascia-mounted controlpanel:- Raise/Lower But-tons- Emergency Stop-Battery Indicator- HourMeter- Key Switch
Robust manual tillerand large mast-mounted grab han-dles
Quikstak™ SP10 SeriesSelf-drive pallet stackers with 1-tonne capacity
Standard lift height 1600mm,optionally 2500mm or3000mm
1000kg rated load capacity
Built-in limit switch andoverloadprotection valve
Manufactured and certified tointernational quality assuranceand safety standards:- Confor-mité Européene- EN ISO3691-1:2012-EN1175-5:1998/A1:2010-EN16307-1:2013- Based on di-rective 2006/42/EC- EN12895:2000- Based on Directive2004/108/EC- IQNet / CQC /CNAS
Optional 'magic-eye' infraredload height adjustment for er-gonomic stacking
Forged forks withadjustable width from200mm-800mm
24v 100Ah deep-cyclesealed gel batteries withbuilt-in charger
Straddle legs with ad-justable width from1132mm-1532mm, idealfor tight warehouse aisles
Auto deceleration with intelligentkinetic energy recovery system(KERS) to maximise battery life
Ultra-manouverabledesign, vertical steereddrive wheel and 1490mmturning radius
Robust plastic fascia:-Battery Indicator- HourMeter- Emergency Stop-Key Switch
Ergonomic tiller with dual-hand controls:- Forward/Re-verse (infinitely-variable)-Raise/Lower- Safety sounder-Reversing safety device
Brushless DC motor withelectronic control system
The Quikstak SP10 Series is a range of self-drivepallet stackers with a one-tonne capacity and1600mm lift height (optionally increased to2500mm or 3000mm). Like all Quikstaks, theSP10 can be fitted with Quikstak’s proprietary‘magic-eye’ sensor system, which automaticallyadjusts the forks to maintain an ergonomic workheight as material is stacked or destacked. Thistechnology has been developed by Quiktstaksince 1994 and offers considerable health andsafety benefits for operators.
Despite its compact size, the SP10 features asuite of new S-Series technology, includingadjustable forks and straddle legs, a brushlessmotor, and an ergonomic new tiller with handle-mounted controls. However, what really sets theSP10 apart is a tiny 1490mm turning radius andminimum width of 1132mm - there is almostnowhere this stacker can’t go!
The Quikstak SP10 complies with a range ofinternational quality and safety standards, and ismanufactured in compliance with ISO 9000. It isthe smallest self-drive pallet stacker availablewhich has been specifically optimised forAustralasian conditions – combining innovativedesign with Quikstaks trusted heritage ofreliability.
Lift
ing
& E
leva
tin
g E
qu
ipm
ent
[email protected] www.mhaproducts.com.auFREECALL 1800 750 900 Catalogue Page 88
Standard lift height 1600mm(optionally as high as 5600mm)
1500kg rated load capacity
Built-in limit switch andoverloadprotection valve
Manufactured and certified tointernational quality assuranceand safety standards:- Confor-mité Européene- EN ISO3691-1:2012-EN1175-5:1998/A1:2010-EN16307-1:2013- Based on di-rective 2006/42/EC- EN12895:2000- Based on Directive2004/108/EC- IQNet / CQC /CNAS
Optional 'magic-eye' infraredload height adjustment for er-gonomic stacking
Forged forks withadjustable width from200mm-800mm
24v 200Ah flooded lead-acid battery with externalcharger
Straddle legs with ad-justable width from1132mm-1532mm, idealfor tight warehouse aisles
Auto deceleration with intelligentkinetic energy recovery system(KERS) to maximise battery life
Manouverabledesign, vertical steereddrive wheel and 1655mmturning radius
Robust plastic fascia:-Battery Indicator- HourMeter- Emergency Stop-Key Switch
Ergonomic tiller with dual-hand controls:- Forward/Re-verse (infinitely-variable)-Raise/Lower- Safety sounder-Reversing safety device
Brushless DC motor withelectronic control system
Model Description Lift Capacity Travel Speed Overall Size (WxLxH) Lift Height Fork Length
S10 Quikstak 1000kg Operator Dependent 1532x1735x2145mm 1600mm 1070mm
SP10 Quikstak 1000kg 6.0km/h 1532x1500x2145mm 1600mm 1150mm
SP15 Quikstak 1500kg 6.0km/h 1582x2095x1895mm 1600mm 1150mm
Unloading timber onto conveyorusing auto infra-red eye sensor
As load decreases the height automatically raises to the conveyor height
STEP 1 STEP 2 STEP 3
Quikstak™ SP15 SeriesHeavy-duty self-drive pallet stackers with 1.5-tonne capacityThe Quikstak SP15 Series is a range of heavy-duty self-drive pallet stackers, with a capacityof 1500kg and lift heights from 1.6 metres toas high as 5.6 metres. Optionally equippedwith ‘magic-eye’ automatic height adjustment,the SP15 is suitable for warehousing,despatch, manufacturing, stacking andgeneral materials handling operations, in anyindustry.
The SP15 is powered by a new self-drive unit,with a brushless electric motor and intelligentregenerative braking system. Combined with abank of lead-acid batteries delivering 200Ah,this permits all-day use in even the mostdemanding of environments.
Both the straddle legs and forged forks on theSP15 are width-adjustable, allowing thestacker to lift all common types of pallet, aswell as traverse warehouse aisles as narrow as1200mm. The tiller includes infinitely-variabledrive controls, ergonomic raise/lower buttonsand a safety sounder, all accessible with bothhands.
Like all Quikstak S-Series products, the SP15complies with a range of international qualityand safety standards, and is manufactured inan ISO 9000 certified plant. It is the onlyheavy-duty, high-reach pallet stacker availablewhich has been specifically optimised forAustralasian conditions.
The way the Quikstak magic-eye works
These are our standard model basic specifications listed below. Please refer to our website for full detailed specifications oneach model and video of these in operation.
The standard model lift height it 1.6 metres however other custom lift heights are available up to 3 metres with the S10 andSP10 models and up to 5.6 metres with the SP15 model. Please contact us for a quotation on your particular requirements.
Lifting
& Elevatin
g Eq
uip
men
t
Catalogue Page [email protected] www.mhaproducts.com.auFREECALL 1800 750 900
