Features• Grab-n-Go. No more measuring, cutting, gluing or taping

• Pre-installed elbow fittings that rotate 360º, simply roll out and attach the dripline • Same performance as comparable sized PVC

• A proprietary blend of Polyethylene provides the same easy-to-manage, self-dispensing coil as other Rain Bird XF Series Dripline

• Available in 100’ coils

• 3/4” and 1” diameters, 12” or 18” spacing • Accepts any 16-17mm dripline

Rain Bird Corporation970 W. Sierra Madre Avenue

Azusa, CA 91702

QF Dripline Header

D40681A

The Industry’s First Pre-Fabricated Header

Quick. Flexible. Time-Saving. Now That’s Intelligent.

For more information visit our website at: www.rainbird.com

Connecting to the Filter/Valve Connecting Rain Bird’s QF Dripline Header is easy using a combination of standard PVC fittings and recommended PE fittings.

Fittings GuideThe QF Dripline Header is designed to work with Rain Bird’s all-new TLF Series - Twist Lock Fittings (¾” and 1” fitting models) which provide an even tighter seal on tubing by using high quality elbows and twist locking nuts.

XQF ¾” Dripline HeaderModels: XQF-75-12-100 | XQF-75-18-100Relevant Dimensions:Outer Diameter: 0.940”Inside Diameter: 0.820”Wall Thickness: 0.060”

XQF 1” Dripline HeaderModels: XQF-10-12-100 | XQF-10-18-100Relevant Dimensions:Outer Diameter: 1.200”Inside Diameter: 1.060”Wall Thickness: 0.070”

Twist Lock Fittings800 Series

(For use on ¾” QF Header)

Twist Lock Fittings1000 Series

(For use on 1” QF Header)

360º Rotating ElbowsQF Dripline Header elbows rotate 360º and incorporate a protective ring that surrounds the elbow – preventing it from damage and ensuring a proper seal. The ring also provides added leverage for ease of attaching the dripline.

The rotating elbow also manages trenching alignment. Move left or right to accommodate the dripline – no need to re-trench.

Self-Dispensing CoilUsing the same reliable self-dispensing coil as other XF Series Dripline tubing, the QF Header lays straight when uncoiled and is easy to install around non-linear landscape features. It bends to a 15” radius without kinking.

The Smart Solution..... to This Problem.

The QF Dripline Header is the industry’s first flexible, coiled dripline header. It’s patent pending design makes installing supply or exhaust header easy. You’ll save time and money by grabbing one 100’ coil of Rain Bird’s QF Dripline Headers with everything you need – versus 100’ of PVC, 100 each of fittings, tees and adapters, tape and a lot of glue. No need to measure and cut 100 pieces of PVC pipe and no gluing or taping – simply grab-n-go.

Durable, robust and leak-free, the QF Dripline Header incorporates pre-installed elbows every 12” or 18” making it an intelligent solution for proper system design and installation. Simply roll out, cut to length and attach any 16 -17mm dripline.

Simple. Just Grab-n-Go.Traditional Fabrication

Durable Build