-
8/6/2019 QA Engineer or Manufacturing Engineer or QA/QC Manager.
QA/QC Su
1/3
John T. Oliver III8567 Rudderow Ave.Pennsauken, NJ
08109-3341Home (856) 486-4825Cell (609)
[email protected]
QUALIFICATIONSSpecialized technical training, coupled with a
long and distinguished career indiversified management and
operational experience in Electronics (SMT and Through hole),
Engineering, Quality Assurance, Quality Control, Manufacturing
Engineering and Manufacturing. Worked extensively ISO 9001:1987,
1994, 2000, 2008, AS9100, ISO-10011-1, ISO-10012-1, IPC Standards,
EIA Standards, MIL-Standards, MIL-Specifications, MIL-Handbooks, US
Army Regulations and DA PAMs..
BUSINESS SKILLS* Project Management* Quality Management* Budget
Responsibility / Accountability* ISO 9001 Standards Implementation*
Engineering Management* Root Cause Analysis
* Staff Development* Quality and Process Improvements* Team
Facilitation* Statistical Process Control* National and
International Regulatory Requirements: UL, CSA, TUV* Computer
Skills: Power Point, Visio, Excel, Word, Access, MS Projects,
ManMan,ETQ, Agile, SyteLine, Orcale, SharePoint.
EXPERIENCEQuality Control Engineer and Section Supervisor 2009
to PresentThe Logistics Company Inc, Fayetteville, NC a" Logistic
Management Support Contractor, US Army a" Fort Dix, NJ
* Assist the Director of Logistics (DOL) in support of the
development, implementation and sustainment of an ISO 9001-2008
compliant quality system.* Assist in the performance of complete
DOM Internal Audits.* Assist in the Corrective Action process
through the verification of actions taken to prevent reoccurrence,
analysis of information and/or data to determine root causes
identified during QA/QC inspections or Internal Audits.* Advise the
DOM, Project Manager, and Assistant Project Manager concerning
theprogress of the ISO 9001development, implementation and
sustainment.* Receive assignment priorities from the DOL, and
prepare briefings and status reports as necessary or requested.*
Define, gather, analyze data, and generate the necessary reports to
determinethe effectiveness of the business management system,
identify weaknesses and are
as for process improvement.* Developed, documented and
implemented monthly shop focused audits in wheeled vehicle, weapons
and electronics maintenance shops.* Responsible for the operational
planning, ISO project management and DOL Quality Team.* Responsible
for briefings and updates to the Director of Logistics and
ProjectManagement concerning ISO compliance issues relating to
analysis of data, internal corrective actions, results of
assessment audits and results of full DOL Internal Audits.* Assist
in the creation, review, implementation and revision of all
internally
-
8/6/2019 QA Engineer or Manufacturing Engineer or QA/QC Manager.
QA/QC Su
2/3
developed SOPas and Work Instructions for completeness and
compliance to ISO 9001:2008 and U.S. Army Regulations prior to
posting on SharePoint for full DOL review and approval.*
Responsible for the development and maintenance of the DOL Internal
Audit Schedule.* Central point of contact and supervisor of the DOL
Quality Team.* Schedule and conduct a weekly meeting with the DOL
Quality Team to brief the status of projects currently in process.*
Plan, organize, control, and prioritize projects being worked on by
the DOL Quality Team.* Possess a current government security
clearance.
Manufacturing Engineer 2005 to 2009Sycamore Networks (Formerly
Eastern Research), Moorestown, New Jersey - Manufacturer of land
wire and cellular communications access equipment.
* Serve as a team member in providing on-going manufacturing /
engineering support for released products through End of Sale and
End of Life.* Responsible for the management of quality and
technical issues at five key suppliers, two OEM suppliers, one Tier
1 and two Tier 2 Contract Manufacturers supplying 1.75 million
dollars in product per quarter.* Participate in Engineering Design
Reviews and drive the implementation of departmental manufacturing
methodologies, guidelines and acceptance criteria.
* Responsible for the performance of Vendor surveys used in the
qualification ofnew Contract Manufacturers.* Responsible for the
establishment, implementation and performance of all FirstArticle
dimensional, visual and electrical inspections used in the
qualification of new suppliers and Contract Manufacturers.*
Tracked, analyzed and reported inspection and on-time delivery
results of oursuppliers and contract manufacturers.* Responsible
for the development of production manufacturing processes and
quality plans for low to high complexity assemblies to ensure
customer satisfaction.* Prepared and revised all levels of
documentation to achieve a unified Operations Quality Management
System between two facilities.* Assumed full responsibility for the
day to day inspection activities of the Receiving Inspection
area.
* Performed internal assessment audits for ISO 9001:2000.*
Trained internal manufacturing and external contract manufacturers
in the assembly and inspection criteria requirements.* Facilitated
and co-facilitated meetings with OEM suppliers and contract
manufacturers concerning inspection results, documentation
requirements and documentation deficiencies.* Supported inspection
and manufacturing technical personnel in the assembly andproblem
solving on low to high complexity assemblies and systems.
ISO 9001:2000 Business Consultant 2002 to 2004Compliant Quality
Systems, LLC, Pennsauken, New Jersey a" ISO 9001-2000
Owner/Consultant.
* Responsible for the performance of GAP Analyses of currently
ISO 9000-1994 registered companies and the identification of
deficiencies (GAPS) in their currentQMS in moving forward to ISO
9001:2000 registrations.* Pre-assessment audits for ISO 9001:2000.*
Prepared / revised all levels of documentation to achieve Quality
Management System compliance.* Facilitated and co-facilitated in
the creation of macro flows and process mapsduring on-site meetings
with the executive management and departmental teams.* Assisted
executive teams in the identification of QMS responsibilities.
-
8/6/2019 QA Engineer or Manufacturing Engineer or QA/QC Manager.
QA/QC Su
3/3
QA Engineer 1985 to 2002CNT (Formerly INRANGE Technologies),
Lumberton, NJ a" Manufacturer of data communication and diagnostic
equipment.
* Responsible for the development and performance of Quality
Management System audits and provision of oversight for resolution
of identified deficiencies.* Development and issuance of management
reports that summarizes audit findings,corrective actions, process
and product performance (metrics).* Developed and implemented
processes and procedures to ensure product quality and customer
satisfaction.* Administered and facilitated the corporate wide
calibration of all test and measurement equipment.* Managed the
exchange of technical information with Engineering, Customer
Service, Manufacturing and Production Control.* Established and
maintained statistical process control (SPC) systems throughout all
applicable operations.* Performed and documented Root Cause
analysis on defect trends and customer complaints.* Participated in
and provided support to improvement/development teams.*
Participated in new project development and implementation.*
Participate in the training and implementation of the Cell concept
theory.
EDUCATIONMajor: Business Administration
Rutgers University, Camden, New Jersey.
A.A., Liberal Arts 1979Camden County College, Blackwood, New
Jersey.
Certificate 2008National Training Center for
MicroelectronicsNorthampton Community College, Bethlehem, PA a" SMT
Soldering and Rework, IPC-7711.
Certificate 2003A.S.Q.C., Princeton, NJ - ISO 9001:2000 Internal
Auditor Training Course
Certificate 2002A.S.Q.C., Princeton, NJ - ISO 9000:2000
Transition Training Course
Certificate 2000DOVE Consulting, Cell Concepts
Certificate 1994Mitutoyo a" Gage Calibration Systems
Certificate 1992STAT-A-MATRIX Institute, Edison, New Jersey -
ISO-9001 Certified Internal Auditor.
Certificate 1991A.S.Q.C., Pennsauken, New Jersey - Certified
Quality Engineer Refresher Course.
Certificate 1990Statistical Thinking for Managers
