PXC Modular Series Owner s Manual A6V10302089 Us En

  • View
    222

  • Download
    8

Embed Size (px)

Text of PXC Modular Series Owner s Manual A6V10302089 Us En

PXC Modular Series Owner's Manual

125-3582(DA) January 15, 2012

Building Technologies

Copyright Notice

Copyright NoticeNoticeDocument information is subject to change without notice by Siemens Industry, Inc. Companies, names, and various data used in examples are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Siemens Industry, Inc.

WarningThis equipment generates, uses, and can radiate radio frequency energy. If equipment is not installed and used in accordance with the instructions manual, it may cause interference to radio communications. Equipment has been tested and found to comply within the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference. Residential area equipment users are required to take whatever measures necessary to correct the interference at their own expense.

Service StatementControl devices are combined to make a system. Each control device is mechanical in nature and all mechanical components must be regularly serviced to optimize their operation. Siemens Industry, Inc. branch offices and authorized distributors offer Technical Support Programs that will ensure continuous, trouble-free system performance. For further information, contact your nearest Siemens Industry, Inc. representative. Copyright 2012 by Siemens Industry, Inc.

FCC RegulationsThe manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible could void the users authority to operate the equipment. For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.2 Siemens Industry, Inc. 125-3582(DA) January 15, 2012

Copyright Notice

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

To the ReaderYour feedback is important to us. If you have comments about this manual, please submit them to: mailto:Sbt_technical.editor.us.sbt@siemens.com

CreditsAPOGEE, APOGEE GO, InfoCenter Administrator, InfoCenter Report Manager, InfoCenter Server, InfoCenter Suite, and Insight are registered trademarks of Siemens Industry, Inc. Other product or company names mentioned herein may be the trademarks of their respective owners. Printed in USA

3 Siemens Industry, Inc. 125-3582(DA) January 15, 2012

Table of ContentsHow to Use This Manual ..........................................................................................83

1 1.1 1.2

Chapter 1Introduction .........................................................................................11 Modular Product Overview ....................................................................................... 11 1.1.1 Ordering Information ................................................................................. 113 3 3

Compatibility with the APOGEE Automation System............................................... 13 1.2.1 BACnet Protocol Compatibility.................................................................. 13 1.2.2 TCP/IP Protocol Compatibility .................................................................. 133 3 3

1.3

Principles of Field Panel Operation.......................................................................... 15 1.3.1 Gathering and Processing Field Inputs..................................................... 15 1.3.2 Executing Control Programs ..................................................................... 15 1.3.3 System Program ....................................................................................... 16 License Manager ...................................................................................... 173 3 3 3 3

1.4

APOGEE Automation Networking............................................................................ 17 1.4.1 Management Level Network ..................................................................... 18 Automation Level Network ........................................................................ 18 1.4.2 1.4.3 Field Level Network .................................................................................. 253 3 3 3

2

2.1

Chapter 2Hardware Features..............................................................................26 PXC Modular Product Diagram................................................................................ 26 Expansion Module Product Diagram........................................................................ 28 Memory..................................................................................................................... 28 2.1.1 Flash Read-Only Memory (Flash ROM) ................................................... 28 2.1.2 Random Access Memory (RAM) .............................................................. 303 3 3 3 3 3

2.2

Communication Connections ................................................................................... 30 2.2.1 HMI and Tool Ports ................................................................................... 31 2.2.2 10B/100B Ethernet Port ............................................................................ 32 2.2.3 RS-485 Port .............................................................................................. 32 2.2.4 Expansion Module Overview .................................................................... 33 2.2.5 TX-I/O Island Bus...................................................................................... 343 3 3 3 3 3

Modular Series Smoke Control Application Requirements ...................................... 34 Example ALN Configuration for Smoke Control Applications................... 353 3

PXM10S/T Product Overview and Description ........................................................ 36 Product Features ...................................................................................... 37 Requirements............................................................................................ 38 Application Menus..................................................................................... 38 Operator Display Layout ........................................................................... 39 Operator Display Menu Tree..................................................................... 40 Main Menu Structure................................................................................. 40 Login and Logoff ....................................................................................... 41 Viewing, Commanding, and Releasing Points.......................................... 47 Configuring Point Monitor ......................................................................... 503 3 3 3 3 3 3 3 4 4

5 Siemens Industry, Inc. 125-3582(DA) January 15, 2012

Configuring Settings.................................................................................. 544

2.3

TX-I/O Product Range Overview.............................................................................. 57 2.3.1 TX-I/O Module Overview........................................................................... 58 TX-I/O Power Supply and Bus Modules ................................................... 624 4 4

2.4

PX Series Enclosures and Service Boxes................................................................ 64 2.4.1 PX Series Service Box Features............................................................... 65 2.4.2 Product Numbers ...................................................................................... 67 2.4.3 PX Series Enclosure Specifications.......................................................... 67 2.4.4 PX Series Service Box Specifications....................................................... 68 2.4.5 PX Series Enclosure Placement ............................................................... 694 4 4 4 4 4

Chapter 3Applications .........................................................................................71 Operator Interface .................................................................................................... 71 Field Panel GO.......................................................................................... 71 Field Panel Web Server ............................................................................ 724 4 4 4

Powers Process Control Language (PPCL

View more >