Upload
others
View
16
Download
0
Embed Size (px)
Citation preview
Rev. 012218
©2018 Solecta, Inc. www.solectamembranes.com4113 Avenida de la Plata, Oceanside, CA 92056
All components of construction are silicone free.This standard electrocoating module can be used with both cationic and anionic paints.
Solecta E-Coat modules are shipped with a 0.5% solution of sodium metabisul�te and need to be �ushed with RO/DI water prior to operation.
Physical Dimensions
37.25 in(946 mm)
38 in(965 mm)
10.765 in(273.4 mm)
1.29 in (32.8 mm)
Housing Length “B”
ElementLength “A”
E-COAT
Module OD “C” Permeate TubeID “D”
PV400-10738-31HElectrocoating Ultrafiltration (UF)Unidesign Module
70 psi (4.9 bar)
10 psi (0.69 bar)
Maximum Inlet Pressure
Minimum Outlet Pressure
Operating Parameters
5 psi (0.34 bar)
Maximum Permeate Pressure
35 psi(2.4 bar)
120° F(49° C)
Maximum Feed Side
Pressure Drop
Maximum Operating
Temperature
CIP: 1.8 - 10.5Operation: 2-10
pH Range
PVDF
PV400-10738AH-8X0M
493 ft2 (45.8 m2)
31 mil (0.76 mm)
PVC
EPDM
None, bypass glued
Membrane Material
Part Number
Membrane Area
Spacer
Housing
Permeate O-Ring
Seal
Product Description