Absolute Auction

HOLLEY PERFORMANCE PRODUCTS, INC.

704 Highway 25 S in Aberdeen, Mississippi 39730

THURSDAY, OCT. 12THSTARTING AT 10AM CDT

Inspection: Day Prior to Auction from 9AM-4PMCINCINNATI Paint Line & Complete Finishing System

PUBL

IC A

UCTI

ON

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com

(15) EATON LEONARD, ALPINE, KEINS, HORN (HMT) & PINES CNC Tube Benders

(30+) EATON LEONARD, ADDISON MCKEE & EAGLE Tube Cuttoffs & End Formers

(4) YALE & DAEWOO Forklifts to 12,000-lb. Capacity

(35+) MILLER & LINCOLN Welders

(3) Toolroom, Engine & Turret Lathes (4) EMPIRE Pro-Finish Blast Cabinets

(10+) Vertical Band Saws

Extensive Assortment of Tube Bending Tooling

new as2013

new as2011

new as2011

Phone: 847/427/3333www.perfectionmachinery.com

2

CNC TUBE BENDERS(2) 2011 EATON LEONARD 1.75” Electric, Model VB42 Elec, S/N CLH860835LSB 06/11 & S/N CLH860836LSB, Electrical Lockout, Hoffman Cooler, Collet Engage/Release, Controlled Tube Support, Rexroth 3-Phase Magnet Motors, Beckhoff CP7212 15” Touch Screen PLC Controls, 14’ Bed, Clockwise/Counterclockwise Bend Arm Rotation for Bending Flexibility, Servomotor-Driven Bend Head2011 ALPINE 4” Single Stack Hyd, Model CNC100HS-RBH, S/N 110815, M3 Controller, Foot Pedal Cycle Start, (3) Mandrel Rods, Wiper Die Bracket, DBB Alternative Repeat Feeding or End Grip

Function, Proportion Hyd. Bending Head, Right Hand Bending, Independent Prog. Y, B & C AxisEATON LEONARD 3” Hyd, S/N EPT75-1992-426-BPR-2006, Bendpro CNC Pedestal Mounted Controls, 14’ Bed, Flange Expander, Adj. Bending Arm2004 KEINS 2” Hyd, Model KBB-50ND, S/N K03811, Proface DRO Controls, Adjustable Chuck, Thermal Transfer Hydraulic CoolerLEONARD 4” Precision Hyd, 14’ Bed(2) EATON LEONARD 1.75” Hyd, Model Tulip-42, S/N VB30174-GR, & S/N VB40340-GL, Hyd. Pump Station, Bendpro Pedestal Mounted Controls, 13’ Bed, Hoffman Electronic Enclosure A/CEATON LEONARD 3” Hyd, Model VB300-

EATON LEONARD 3” Hydraulic CNC Tube Bender LEONARD 4” Precision Hydraulic CNC Tube Bender (2) EATON LEONARD Tulip-42 1.75” CNC Tube Benders

KEINS KBB-50ND 2” Hydraulic CNC Tube Bender (3) HORN (HMT) 2RCNC & 2LCNC 2” and EATON LEONARD VB30 3” Hydraulic CNC Tube Benders

(2) EATON LEONARD VB42 1.75” Electric CNC Tube Benders ALPINE CNC100HS-RBH 4” Single Stack Hydraulic CNC Tube Bender

Extensive Assortment of Tube Bender Tooling

EATON LEONARD VB300-RH 3” Hydraulic CNC Tube Bender EATON LEONARD VB300C-MP 3” Hydraulic CNC Tube Bender EATON LEONARD VB300 3” Hydraulic CNC Tube Bender

2011

1 0F 2

2011

2004new as2009

3

RH, S/N VB30E-517K, 3-Axis, Hyd. Mandrel Extractor, Hyd. Pressure Die Assist, Direct Acting Pressure Die, Drop Away Type Clamp Die, Head-Shift for 2-Stack Bending Capability for Multi-Radius Bending, Auto Lube System, 181.5” Rod Length, Foot Switch, Bendpro CNC Touch Screen ControlsEATON LEONARD 3” Hyd, Model VB300C-MP, S/N VB300-157-Ml, 3-Axis, Hyd. Mandrel Extractor, Hyd. Pressure Die Assist, Direct Acting Pressure Die, Drop Away Type Clamp Die, Head Shift for 2-Stack Bending Capability for Multi-Radius Bending, Auto Lubrication System, 214” Rod Length, Rod Length 181.5”, Foot Switch, Bendpro CNC Touch Screen Controls

S/N 09L23261B, Bendpro G2 Control, Foot Switch, 174.5” Rod Length, Hoffman Hydraulic Cooling SystemPINES 2” Hyd, S/N 11290-68305, 12’ BedHydraulic, Dual Ram Swivel, Back Single Bender on CastersLots of Bender Tooling

TUBE CUTTERS(2) 2011 EATON LEONARD Straight Stroke Tube Cutoff Machines, S/N 880012 & 880013, Allen Bradley Panel View C 600 Controls(2) EAGLE T/C 80 Tube Cutters, 3.6” Blade, Changeable Tube Dies, 15-HP, S/N 2464 & 2318, 480/3/60(4) EAGLE T/C Tube Cutters, 3” Blade, S/Ns 1826, 1185, 1799 & NAEAGLE T/C Pipe Cutoff Machine, 2.6” Blade, S/N 1825

TUBE END FORMERS(2) 2011 EATON LEONARD VFDA 2.5” Tube End Formers, S/N 880008 & 880009, Allen Bradley Panel View Plus 600 DRO, Adj. Sizing Jaw (for ID/OD Forming Control), Expanding, Reducing, Beading & Rotary Flaring Application(11) EAGLE C End Finishing Machines, Adjustable Sizing Jaws, S/Ns 2420, C838, 2475, C531, 2449, C837, C915, 2450, 997, 1371, 1206(4) ADDISON MCKEE FM-60ER End Formers, Sizing Jaws, S/N 65033, 48516, 46817, 48515(2) EAGLE D End Finishing Machines, Double Jaw Formers, S/N 1031 & 1199

EATON LEONARD 3” Hyd, Model VB300, S/N VB300-399-HR, 3-Axis, Hyd. Mandrel Extractor, Hyd. Pressure Die Assist, Direct Acting Pressure Die, Drop Away Type Clamp Die, Head Shift for 2-Stack Bending Capability for Multi-Radius Bending, Automatic Lubrication System, AB Hydraulic Cooling System, 169” Rod Length, Bendpro CNC Prog. ControlsEATON LEONARD 3” Hyd, Model VB30, S/N VB30-108-GR, 151” Pipe Length, Bendpro CNC Controls, American Hydraulic Cooler, FootswitchHORN (HMT) 2” Hyd, Model 2RCNC, S/N 09R23612B, McLean Hydraulic Cooler, Bendpro G2 Control2009 HORN (HMT) 2” Hyd, Model 2LCNC,

EAGLE C-85 Tube End Finishing Machine, Adj. Sizing Jaw, S/N 770149EAGLE D2000 Tube End Former, 2-Position Former, S/N 5092End Former & Tube Rolling Parts, Pallets, Racks & Cabinets of Die & End Former Parts

PIPE RELATED(5) Hydraulic Pipe Benders(5) WALKER Hyd. Vertical Ram Tube Flattener(2) Small Pipe FlattenersCustom Pipe Cutting Saw w/Turn Style Cut Wheel, 6.6’ Adj. Roller Extension Stand, 8’ Pipe Feed StandCONTINENTAL Tube Tube Cutoff Saw(3) SCOTCHMAN Portable Tube Cutoff SawsCONTINENTAL Pipe & Tube Cutoff SawPipe Cut Off Machine (Parts)(2) Tube Flaring Machines(4) Ram Hydraulic Horizontal Pipe FlangersCustom Pipe Bending Fixture Steel Carts

WELDERS & RELATEDESAB Power Cut 650 Plasma Cutter(21) MILLER Deltaweld 452 Welders w/S60 & 70 Series 24V Wire Feeders, New as 2011(5) MILLER CP-302 Welders, (4) w/22A Series 24V Wire Feeders(2) MILLER Syncrowave 250 Welders (2) MILLER Syncrowave 250 DX Welders w/Tank Carts(3) LINCOLN CV 250 Welders w/Lincoln

CONTINENTAL Vertical Tube Cutoff Saw (4) Ram Hydraulic Horizontal Pipe Flangers

(30) EATON LEONARD, EAGLE & ADDISON MCKEE TUBE CUTOFFS & TUBE END FORMERS, NEW AS 2011

1 0F 4

1 0F 2 1 0F 2

4

LN-7 Wire FeedersMILLER CP-200 Welder w/Millermatic Wire FeederLINCOLN Square Wave TIG 255 Welder w/Magnum Wire FeedLINCOLN Electric LN-7 Wire Feeder (7) Oxygen Acetylene Torch Carts w/Regulators & Torches(15) Barrels of 0.035 Dia. Welding Wire w/Loading ConesWelding Curtains

PAINT LINECINCINNATI Paint Line, S/N 1523.6, 30” x 72” Booth Opening, AB Panelview Plus 700 PLC Control, Full Hanging Hook Carousal Production/Delivery System, Manual Paint Stations, Wash Tank System, Steam Heat Oven w/Twin City Blower 365-HP Motor

BLAST CABINETS & VIBRATORY FINISHING

(4) EMPIRE Pro-Finish PF4848 Blast Cabinets w/Empire DCM-2004 Reclaiming Units & Debris Collectors(4) VIBETECH THT-3070 Vibratory FinishersIRONWORKERSMUBEA 48-4 Ironworker KBL Shear/NotcherMETAL MUNCHER Model MM-61E 19-Ton Ironworker

SHEAREDWARDS Truecut 1/4” x 120” Hyd.

GANESH Deluxe GMV-5 Vertical Mill, 4-Axis, 58” T-Slotted Table, DRO, V/SKONDIA Powermill FV-1 Mill, 4-Axis, 44” T-Slotted TableBRIDGEPORT 2-HP Vertical Mill, 3-Axis, V/S, 48” T-Slotted Table(2) BRIDGEPORT Vertical Mills, 48” T-Slotted Table

DRILLSMSC Vertical Radial Drill Press, 44” Table, 3-Axis, Wizard 100 2-Axis (2) EDMUND Dual Vertical Drill Presses, Model 2F-12HAMILTON Varimatic Drill Press

AIR COMPRESSORSSULLAIR Air Compressor, Model SRD 6308C, S/N 033-D12701, 100-150 PSIG2000 ATLAS COPCO Air Compressor, Model GA 50 VSD, S/N AII351152SULLAIR Air Compressor, Model 20-150L ACAC, S/N 003-66656

FORKLIFTS &MATERIAL HANDLING

2009 YALE 12,000-Lb., Model GLC120VX, LPG, Solid Non-Marking Tires, 185’` Raised/91’`Lowered 3-Stage Mast, 66” Forks(2) 2013 YALE 8,000-lb. Box Car Special Forklift, Model GLC080VXNG, LPG, Lever Shift, Solid Tires, 129” Raised/87” Lowered 2-Stage Mast, Side Shift, 38” Forks

Shear, Model 6.5/3000, Power Back Gauge, 11’ Bed

PRESSESCHICAGO 90-Ton Press Brake, Model 810-L, 10’ Brake BedCOLUMBIA Date Stamping Press100-Ton Vertical Hydraulic Adj. PressROCKFORD 40-Ton OBI Punch Press, Model 40-W, 11.25” Shut Height, 100 SPMFANCO 40-Ton Hydraulic PressVertical Roll Press, Model T-67544 4#2 COLLECTO Press / Power Plenum Collector Press(8) Hyd. Horizontal PressesHydraulic H-Frame Press

LATHESSUMMIT 18” x 48” Toolroom Lathe, Model 17-4X40YAM 18” x 48” Engine Lathe, Model 1733GWARNER & SWASEY No.3 14” x 36” Ram Type Turret Lathe, Model M-1200

SAWS(13) DOALL Vertical Band Saws, Models 3613-1, V-26, ZV-3620, HP36, 36W, 36R, 36R, 2W 3620, ZS 3620TANNEWITZ Vertical Band Saw, T-Slotted TableJET Horizontal Band Saw, 3/4-HP Motor

MILLS1993 HAAS VF-3 CNC Mill, 5-Axis, BTC PLC Control

DAEWOO 5,000-lb. Propane Forklift, Model GC25S-2, S/N 06-01345, 3-Stage Mast, Solid Tires, 55” Forks, Side ShiftKEMPER Vacuum Suction Lift System, Control Box, (2) Jib Swing Arms(12) PLYMOVENT Knuckle Suction Movers, Model 9123667 Some w/(6) Vertical Floor StandsCALDWELL 2-Ton H-Frame Hoist, 139” Wide, Chester 1-Ton Chain Hoist on Casters

MISCELLANEOUS(9) Hydraulic Pump Stations Pinch Sander(2) SCHMIDT Marking Machines, Model 25ES-S(3) Deburring Machines(2) PolishersRITTER 6” Horizontal Belt Sander, Model R-950, S/N 28DEWALT 8” Double End Bench GrinderDAYTON Double End Pedestal Grinder(7) Vertical Pedestal Disc Grinders(2) Industrial BlowersSORGEL 3-Phase General Purpose Transformer, 112.5 KVA SIEGEL 3-Ph Insulated Transformer, Style 34349 17212 042, 75 KVAHeavy Duty Steel Layout Tables—Some w/Casters(300+) Wire Baskets, Various Sizes8’ Rolling Step Ladder1-Ton Die CartsTool Crib - Shelves & Contents w/Servo Parts/Motors, Replacement Benders Parts, Gears, Bearings, Seals

(35+) MILLER & LINCOLN WELDERS & ESAB PLASMA CUTTER

CINCINNATI Paint Line (4) EMPIRE Pro-Finish PF4848 Blast Cabinets (4) VIBETECH THT-3070 Vibratory Finishers

MUBEA 48-4 Ironworker KBL Shear/Notcher

CHICAGO 90-Ton Press Brake ROCKFORD 40-Ton OBI Punch Press

EDWARDS Truecut 1/4” x 120” Hydraulic Shear

1 0F 4

5

(2) Polishers

CALDWELL 2-Ton H-Frame Hoist

RITTER 6” Horizontal Belt Sander

(9) Hydraulic Pump Stations

Large Tool Crib w/Motors, Gears, Bearings, Seals & Replacement Bender Parts

(2) SCHMIDT Marking Machines (300+) Various Size Wire Baskets

YALE GLC120VX 12,000-Lb. Forklift DAEWOO GC25S-2 5,000-lb. Forklift

GANESH Deluxe GMV-5 Vertical Mill

KONDIA Powermill FV-1 Mill (3) BRIDGEPORT Vertical Mills MSC Vertical Radial Drill Press ATLAS COPCO Air Compressor

SUMMIT 18” x 48” Toolroom Lathe HAAS VF-3 CNC Mill

(2) YALE GLC080VXNG 8,000-lb. Box Car Special Forklift

(10+) DOALL & TANNEWITZ Vertical Band Saws

1 0F 3

2009 2013

1 0F 9 (300+)

1 0F 2

2009

FIRST CLASS MAILPRESORTED

FIRST CLASS MAIL U.S. POSTAGE

PAID CINCINNATI, OH

PERMIT NO. 5714

HOLLEY PERFORMANCE - COMPLETE TUBE BENDING, FORMING & FINISHING FACILITY

TERMS OF SALE: Copies of Terms of Sale will be posted at the auction. Additional terms may be announced during the auction. We make every effort to accurately describe each item in the auction; however, a mistake may occur. Buyers must take responsibility to thoroughly inspect the items on which they intend to bid. Each item will be sold “As is, where is.” There is absolutely no warranty or guarantee of any kind either written or implied. Occasionally, additional information may come to light regarding any and all items being sold during the auction. When this occurs the new information takes precedence.

REMOVAL & PAYMENT: Machinery removal is the responsibility of the buyer. All equipment must be removed in accordance with the specific auction timeline and terms of sale. See the specific auction web page for details. Anyone (rigger or buyer), using a powered vehicle to remove items must have a certificate of insurance on file with Myron Bowling Auctioneers in the amount of $1,000,000.00. Item removal generally begins at the conclusion of the auction and after payment in full is received by cash, wire transfer, or company check (if approved by the auction company or bank letter of guarantee). All checks should be made payable to Myron Bowling Auctioneers. Taxes will be charged unless you have provided a proper written exemption from your state. SAMPLE BANK LETTER: Dear Sirs, (BANK NAME) irrevocably guarantees payment in full to Myron Bowling Auctioneers by (BUSINESS NAME) drawn on account (NUMBER) up to the amount of $ (DOLLARS) to purchase items at your (AUCTION NAME). This letter of guarantee is valid until (MONTH, DAY, YEAR). Regards, (BANK REPRESENTATIVE, TITLE, BANK NAME).

COMPLETE TERMS & CONDITIONScan be found at myronbowling.com, or call 513/738-3311 if you have questions

TERMS & CONDITIONS

Myron C. Bowling, # 466

Auction conducted by:MYRON BOWLING AUCTIONEERS, INC.P. O. Box 369, Ross, Ohio 45061

Absolute Auction

HOLLEY PERFORMANCE PRODUCTS, INC.

704 Highway 25 S in Aberdeen, Mississippi

THURSDAY, OCT. 12TH Starting at 10AM CDT

Inspection: Day Prior to Auction from 9AM-4PM

Bid Online in Real Time at UNABLE TO ATTEND?

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com

BUYER’S PREMIUM: 15% ONSITE • 18% ONLINEINSPECTION: THE DAY BEFORE THE AUCTION FROM 9AM TO 4PM

(4) Forklifts to 12,000-lb. Capacity, New as 2013

(35+) MILLER & LINCOLN Welders

CINCINNATI Paint Line & Complete Finishing System

(15) EATON LEONARD, ALPINE, KEINS, HORN (HMT) & PINES Tube Benders

(30+) EATON LEONARD, ADDISON MCKEE & EAGLE Tube Cuttoffs & End Formers

Register: You must register as an online bidder through Bidspotter.com, 24 hours prior to the auction start time to allow sufficient time to be approved. You’ll find the Bidspotter link on the specific auction page on our Website.Deposit: A deposit of 25% of your anticipated purchase or a bank letter of guarantee is required to bid online. Mail deposit check to: Myron Bowling Auctioneers, P.O. Box 369, Ross, Ohio 45061. Call 513/738-3311 for wire instructions. Fax your bank letter of guarantee to 513/738-0221.Approval: Once the registration process has been completed and your deposit received, you will be notified through an automated Bidspotter email, that you are approved to bid.

ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYER’S PREMIUM

(3) Toolroom, Engine & Turret Lathes

For Informationon Upcoming

Auctions

FOLLOW US ON

Phone: 847/427/3333www.perfectionmachinery.com

new as2011