Protect Organize Control - fusetek.com · KLSR replaces competitor’s: KTSR, A6KR The Littelfuse FLNR_ID and FLSR_ID Indicator fuses provide visual indication ... The unique design

2013

Product Solutions Guide

P r o t e c t O r g a n i z e C o n t r o l

IndexProduct Page

General Purpose Fuses 3-5

Midget/Electronic 6

Fuse Holders & Blocks 6-7-8

Fuse Reducers/Puller/Clamps 8

Special Purpose Fuses 9

Telecom/Capacitor fuses 10

Semiconductor Fuses 11-12

Solar Product 13-15

High Voltage & Accessories 16-17

Panel Building Products 18-21

Automation Products 22

Maintenance Kits 23

Enclosures 24-27

KN

OW

LE

DG

E S

ER

VIC

E S

OL

UT

ION

S80

0-47

9-38

75

Our Partners

DRIESCHER

Sample part #: CCMR-15

The CCMR series POWR-PRO CC fuses are true dual element, time-delay fuses specifically engineered for space-saving motor branch cir-cuit protection. These fuses are recommendedfor motor circuits up to 40 HP and for generalpurpose circuits up to 60 amps.

• Voltage Rating: 600 VAC (contact factory for DC voltages)• Interrupting Rating: 300,000 AC amperes• Ampere Range: 2/10 - 60 amperes CC 2/10 - 30A CD 35 - 60A• Time Delay

CCMR Series Class CC/CD

CCMR replaces competitor’s: LPCC,ATDR

KLPC series POWR-PRO fuses pro-vide ideal overcurrent protection forservice switches, switchboard mainsand feeders, bolted pressure contactswitches, motor control centers, trans-formers, power circuit protection andother applications requiring 200 - 6000ampere fuses.• Voltage Rating: 600 VAC / 480 VDC• Interrupting Rating: 300,000 AC / 20,000 DC amperes• Ampere Range: 200 - 6000 amperes• Time Delay

KLPC Series Class L

Sample part #: KLPC-1200

KLPC replaces competitor’s: KRPC,A4BQ

Littelfuse LLSRK_ID series fuse is themost advanced Class RK1 fuse available today providing unparalleled performance and protection to modern circuits. The patented Indicator technology provides instant identification of a blown fuse greatly enhancing system uptime, while the preci-sion formed short circuit elements virtually eliminate damage to components from unexpected electrical faults.

• Voltage Rating: 600 VAC / 300 VDC• Interrupting Rating: 200,000 AC amperes 300,000 AC amperes (Littelfuse self certified) 20,000 DC amperes• Ampere Range: 1/10 - 600 amperes• Time Delay

LLSRK_ID Series Class RK1

Sample part #: LLSRK-100ID

LLSRK_ID replaces competitor’s: LPSRK, A6DR

Littelfuse LLNRK and LLSRKseries POWR-PRO fuses providesuperior overload and short circuit pro-tection for general purpose(service entrance, main, feeder, andbranch circuits) and for circuits with highinrush currents (motors, transformers,and solenoids).

• Voltage Rating: 250 VAC / 125 VDC (LLNRK) 600 VAC / 300 VDC (LLSRK)• Interrupting Rating: 300,000 AC / 20,000 DC amperes• Ampere Range: 1/10 - 600 amperes• Time Delay

LLNRK / LLSRK Series Class RK1

Sample part #: LLNRK-100

LLNRK replaces competitor’s: LPNRK, A2DRLLSRK replaces competitor’s: LPSRK, A6DR

The Littelfuse JTD Indicator fuseprovides visual indication when thefuse has blown and maximum pro-tection in a compact package. Idealfor use with motors, transformers,solenoids, and general purpose cir-cuits with limited space.

• Voltage Rating: 600 VAC (contact factory for DC voltages)• Interrupting Rating: 300,000 AC amperes (Littelfuse self-certified)• Ampere Range: 8/10 - 600 amperes• Time Delay

JTD_ID Series Class J

Sample part #: JTD-100ID

JTD_ID replaces competitor’s: LPJ, AJT

LDC Series Class L

LDC series fuses are the first UL Listed 600volts AC and DC Class L fuse. They are recom-mended for UPS protection, DC distribution, DC variable speed drives, crane rail circuits and other large DC equipment, mass transit systems, and general purpose main, feederand branch circuits.

• Voltage Rating: 600 VAC / 600 VDC• Interrupting Rating: 200,000 AC / 50,000 DC amperes• Ampere Range: 150 - 2000 amperes• Time Delay

Sample part #: LDC-1200

General Purpose Fuses

3

For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com

Approvals:Approvals:

Approvals:

Approvals:


KLLU Series Class L

The general purpose KLLU Class L fuse pro-vides high quality protection at a slightly lowercost than the POWR-PRO KLPC version. Thesefuses are recommended for use in serviceswitches, switchboard mains and feeders, boltedpressure contact switches, motor control centermains, and large motor branch circuits.

• Voltage Rating: 600 VAC • Interrupting Rating: 200,000 AC amperes• Ampere Range: 601 - 4000 amperes• Time Delay

Sample part #: KLLU-1000

Three types of Class CC fuses provide protec-tion for a variety of components. The KLDR series fuses are designed to withstand the high magnetizing inrush of transformers. The KLKR series fuses are used to protect equip-ment requiring fast response to faults. (Refer to the POWR-PRO section for information on the CCMR series motor protection fuses).

• Voltage Rating: 600 VAC / 300 VDC• Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1/10 - 30 amperes• Time Delay: • Fast Acting: KLDR series KLKR series

KLDR/KLKR Series Class CC

Sample part #: KLKR-10

KLNR/KLSR Series Class RK1

The KLNR/KLSR series Class RK1 fuses are extremely current limiting and provide fast-acting overload and short-circuit protection. They are recommended for use with resis-tance heaters, lighting circuits, and other non-inductive loads up to 600 amperes.

• Voltage Rating: 250 VAC / 125 VDC (KLNR) 600 VAC (KLSR) • Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1 - 600 amperes• Fast Acting

Sample part #: KLNR-200

KLNR replaces competitor’s: KTNR, A2KRKLSR replaces competitor’s: KTSR, A6KR

The Littelfuse FLNR_ID and FLSR_IDIndicator fuses provide visual indicationwhen the fuse has blown, reducing downtime and increasing safety. Ideal for usewith all general-purpose circuits, motors,transformers, solenoids, fluorescent lightingand all system components with highinrush currents.

• Voltage Rating: 250 VAC / 250 VDC (FLNR_ID) 600 VAC / 300 VDC (FLSR_ID)• Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1/10 - 600 amperes• Time Delay

FLNR_ID/FLSR_ID Series Class RK5

Sample part #: FLSR-200ID

FLNR_ID replaces competitor’s: FRNR, TRNRFLSR_ID replaces competitor’s: FRSR, TRS

JLS Series Class J JLS series fuses provide space-saving,fast-acting protection for non-inductiveloads. The fuse characteristics are similarto the KLNR/KLSR series RK1 fuses, butare much smaller in size. They are alsorecommended for use with resistanceheaters, lighting circuits, and other non-inductive loads up to 600 amperes.

• Voltage Rating: 600 VAC• Interrupting Rating: 200,000 amperes• Ampere Range: 1 - 600 amperes• Fast Acting

Sample part #: JLS-200

JLS replaces competitor’s: JKS, A4J

JLLN/JLLS POWR-T Series Class TPOWR-GARD Products space savingPOWR-T fuses provide fast-actingoverload and short circuit protectionfor non-inductive circuits. These fusesare recommended to protect individualelectric services and meters, main switch meter stacks and similar equipment.

• Voltage Rating: 300 VAC / 125 VDC (110 - 1200 amps) (JLLN) 600 VAC / 300 VDC* (JLLS)• Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1 - 1200 amperes• Fast Acting

4


Approvals:

Approvals:

Approvals:

Approvals:

Approvals:

Approvals:

Sample part #: JLLN-100 JLLS-035


KLLU replaces competitor’s: KLU, A4BTKLKR replaces competitor’s: ATMR, HCLRKLDR replaces competitor’s: ATQR, HCTR

JLLN replaces competitor’s: A3T, TJNJLLS replaces competitor’s: A6T, TJS

NLN/NLS Series Class K5

NLN and NLS series fuses provide low cost protection for general purpose feeder and branch circuits.

• Voltage Rating:

250 VAC / 250 VDC (NLN)600 VAC (Refer to catalogue DC voltages (NLS)• Interrupting Rating:

50,000 AC amperes (contact factory for DC amps)• Ampere Range:

1 - 600 amperes• One-Time Fuse

Sample part #: NLS-125

NLN replaces competitor’s: NON, OTNLS replaces competitor’s: NOS, OTS

The unique design of Littelfuse’s compactSLC series Class G fuses provide size rejec-tion to insure correct fuse replacement. These low-cost, space-saving fuses are recom-mended for use with both non-inductive and inductive loads with limited inrush currents.

• Voltage Rating:

600 VAC (1/2–20A), 480 VAC (25–60A)• Interrupting Rating:

100,000 AC amperes• Ampere Range:

1/2 - 60 amperes• Medium Time Delay

SLC Series Class G

Sample part #: SLC-10

PLUG Fuses Normal Blow & “P” Rated

The Littelfuse IDSR Indicator fuse wasdesigned specifically for DC applications.It offers 600 volt AC/DC ratingalong with visual blown fuse indication.Ideal for use with general purposecircuits, motors, transformers, solenoids,fluorescent lighting and all system components with high inrush currents.

• Voltage Rating:

600 VAC / 600 VDC

• Interrupting Rating:

300,000 AC / 20,000 DC amperes

• Ampere Range:

1/10 - 600 amperes

• Time Delay

IDSR Indicator™ Series CLASS RK5

Sample part #: IDSR-125

IDSR replaces competitor’s: FRSR, TRS

SLC replaces competitor’s: SC, AG

GP – For general purpose circuit protection.

TD – Medium time-delayfuses. Recommended for generalpurpose branch-circuit protection.• Voltage Rating:

125 VAC

• Ampere Range:

15, 20, 25, 30 amperes• Time Delay or Medium Time Delay


5


Approvals:

Approvals:

Approvals:

Approvals:

Sample part #: GP-15, TD-15

Fuse PullersFor safe fuse installation and removal.Available in 4 sizes and ergonomicallydesigned for comfort.

Approvals:

Type of fuse puller Part # Fuse Size (Dia.)

Midget Fuse MFP 3/8 - 1/2” fuses

Pocket Fuse LPFP 250V Fusesfrom 0 - 200A600V fuses from 0 - 100A9/16” - 2 19/32 fuses

Giant Fuse GFP 250V fuses from 61 - 600A600V fuses from 61-400A1 1/16 - 2 19/32 fuses

Tri Puller 097023 For ATO, MINI and glass fuses

ALTERNATIVE POWER SOLUTIONS

Littelfuse offers several series of midget fuses that providesupplementary protection in such applications as: controlcircuits, street lighting, computers, DC circuits, solenoids,small motors and transformers. Available in fast-actingand time-delay versions in a variety of voltage, ampereand interrupting ratings.

• Voltage Rating: 32 - 1000 VAC

• Interrupting Rating: 10,000 - 200,000 AC amperes(10,000 DC amp fuse available)

• Ampere Range: 1/10 - 30 amperes

• Time Delay: FLA, FLM, FLQ, KLQ

• Fast Acting: BLF, BLN, BLS, FLU, KLK, KLKD

BLF series250 VAC (1/2 - 15 amps)125 VAC (20 - 30 amps)1/2 - 30 amps10,000 AIRFast Acting

BLN series250 VAC1 - 30 amps10,000 AIRFast Acting

BLS series600 VAC (2/10 - 5 amps)250 VAC (6 - 10 amps)2/10 - 10 amps10,000 AIRFast Acting

FLA series125 VAC1/10 - 30 amps10,000 AIRTime Delay

FLM series250 VAC1/10 - 30 amps10,000 AIRTime Delay

FLQ series500 VAC1/10 - 30 amps10,000 AIRTime Delay

FLU series1000 VAC/DC44/100 - 11 amps44/100A: 10,000 AIR11A: 20,000 AIR

KLK series600 VAC / 500VDC1/10 - 30 amps200,000* AIRFast Acting

KLKD series600 VAC/VDC1/10 - 30 amps100,000 AC / 10,000 DC AIRFast Acting

KLQ series600 VAC1 - 6 amps10,000 AIR

Midget Fuses

Replaces competitor’s:LF CompetitorBLF BAF, OTMBLN BAN, OTMBLS BBSFLA FNA, GFNFLM FNM, TRMFLQ FNQ, ATQFLU DMMKLK KTK, ATMKLKD KLMKLQ KTQ

Sample part #: KLK-15

Midget - Electronic

Electronic FusesLittelfuse supplies numerous Slo-Blo®, fast-acting, and indicating fuses, used in a variety of electrical, electronic and communications equipment to provide superior protection.

Cartridge Type: 312, 313, 215, 216, 217, 218, 314, 326• Voltage Rating: 32 - 250 VAC• Interrupting Rating: 35 - 10,000 amperes• Ampere Range: 1/100 - 30 amperes• Slo-Blo®: 313, 326, 215, 218, • Fast Acting: 312, 314, 216, 217

• Indication: 313_ID,

Selected Electronic Fuses:

For additional informationsee Littelfuse’s ElectronicDesigners Guide - EC101.

215 series (Type T)5x20mm SLO-BLO®250 VAC (.200 - 10 amps)

216 series (Type F)5x20mm Fast Acting250 VAC (.050 - 10 amps)

217 series (Type F)5x20mm Fast Acting250 VAC (.032 - 15 amps)

218 series (Type T)5x20mm SLO-BLO®250 VAC (.032 - 15 amps)

312 Series3AG Fast Acting250 VAC (1/100 - 10 amps)32 VAC (12 - 35 amps)

313 Series3AG SLO-BLO®250 VAC (1/100 - 8 amps)32 VAC (10 - 30 amps)

313 Indicating series3AG Indicating SLO-BLO®250 VAC (1/2 - 8 amps)32 VAC (10 amps)

314 Series3AB Fast Acting250 VAC (1/8 - 30 amps)

326/325 series3AB SLO-BLO®250 VAC (1/100 - 30 amps)

Sample part number: 0313010.VXID Sample part number: 0218.400VXP

Fuse blocks are available for Class H/K5,Class R, Class J, Class T, Class G, ClassCC, Midget. Integral blown fuse indication.

• Voltage Rating: 250 & 600VAC• Ampere Range: 30 - 600A

Fuse Blocks Fuse Block CoversImproves safety to personnel by minimizingcontact with energized parts. Availablefor Class H/R, J, CD, CC, T and Midget style fuses up to 100 amps.

6

Fuse Holders & Blocks


Approvals: Approval:

Approvals:

Approvals:

Class CC jusqu’a 30A - SPL001Class CC 35-60A - LFC60060FBCClass J jusqu’a 30A - LFJ60030FBCClass J jusqu’a 60A - LFJ60060FBCClass J jusqu’a 100A - LFJ60100FBCClass H/R jusqu’a 30A - LFH25030FBCClass H/R jusqu’a 60A - LFH25060FBCClass H/R jusqu’a 100A - LFH25100FBC Class H/R jusqu’a 30A - LFH60030FBCClass H/R jusqu’a 60A - LFH60060FBCClass H/R jusqu’a 100A - LFH60100FBC

Fuse Holders & Bloks

POWR-SAFE “Dead Front” HoldersLittelfuse POWR-SAFE holders provideoptimum protection to personnel.These DIN-Rail mountable holders areavailable in indicating and non-indicatingversions for Class CC, Midget,

Voltage Rating: 600VAC

Interupting Rating: 200kA

Amp Rating: 100A, 200A & 400Amp

Poles: 3 Pole only

Cover: Included. Clear lexan

Class J 100, 200 & 400Amp Blocks

Class J 30 & 60Amp Holders

Class J 30 & 60Amp holders provideoptimum protection to personnel.These DIN-Rail mountable holders areavailable in indicating and non-indicatingversions.

Semiconductor Fuse Blocks

LSCR001 & LSCR002 SeriesModular-designed Semiconductor fuse blocks are designed to accommodate a wide range of Semiconductor fuses, with a maximum diameter of 3”. This modular design greatly reduces inventory require-ments. They are sold in pairs.

1LS Series

Littelfuse’s 1LS series modular stylesemiconductor fuse blocks accommodatea wide range of semiconductorfuses. Blocks are provided in pairswith fuse mounting hardware.

Voltage: 600VACAmperage: 1-600A

POWR-BLOKS Global Distribution Blocks add safety and mounting versatility to our distribution block solutions. The Global Distribution Blocks are IP20 finger safe to reduce the risk of contact and eliminates the need for block or panel covers.

Features and Benefits

• Space saving design• Integrated touch-safe cover to increase safety• IP20 protection rating• Mounts to DIN rail or panels• Reliable brass connections for excellent continuity in a smaller design

GDB Distribution Block Finger Safe

POWR-BLOKS power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary power into sec-ondary circuits. Lx2xxx-DIN series offers integral DIN-Rail mount and an optional hinged safety cover


Material:Phenolic rated at 150°C and Thermoplastic rated at125°C (LD1400 and LS1300 series only)

Connector: Standard: Highly conductive aluminium, tin plated. Rated for cop-per and aluminium conductors.

Approvals:

POWR-BLOKS

Class CC & Midget

Voltage Rating: 600VAC/DC

Amp Rating: 30A,

Poles: 1, 2, 3


Amp Rating: 30, 60A

Poles: 1, 2, 3


Amp Rating: 80 - 310A,

Poles: 1, 2, 3

Refer to LD or LFD in the Littelfuse Powr-Gard catalogue

LSCR001 - 600VAC for use up to 400Amp (700VAC Pending)LSCR002 - 600VAC for use up to 800Amp (700VAC Pending)

7For technical information on any of the products in this short form catalogue

Please visit www.fusetek.com

Approvals:

Approvals:

Approvals:

Approvals:

Sample part #: Midget - LPSM0001Z Class CC - LPSC00002Z

Sample part #: Class J 30A 31284.000 Class J 60A 31920.000

Sample part #: Class J 100A 33306.000 Class J 2000 33307.000 Class J 400A 33308.000

With Indication

Sample part #: Class J 30A 31932.000 Class J 60A 31923.000

Sample part #: Midget - LPSM0001ZXID Class CC - LPSC00002ZXID

With Indication

Sample part #: Class J 100A 33309.000 Class J 2000 33310.000 Class J 400A 33311.000

BUS Mount version

Panel Mount version

Panel Mounted Fuseholders

571 series / 572 Snap mountPanel mount fuseholders are availablefor Midget or Class CC fuses.

• Voltage Rating: 600 volts• Ampere Rating: 30 amperes

In-Line Watertight Fuseholders

LEB/LEC, LEX/LEY & LET series

Littelfuse’s 600 volt in-line watertightfuse holders are available in both break-away and non-breakaway styles, singleand double pole versions, allowing maxi-mum flexibility for any application.Designed for use with Class CC andMidget style fuses up to 30 amps. Singlepole solid neutral holders are also avail-able.

Fuse ReducersFuse reducers allow smaller size fusesto be installed in existing fuse clips.For use with 250 & 600V Class H/R and J class fuses.

POWR-JAW Clip ClampsFor improving contact between fuseand clips. Clip clamps minimize poorclip contact due to loss of spring force.

Fuse Types: Class CC & Midget

Voltage Rating: 600VAC/DC

Ampere Rating: 30A.

Poles 1, 2, 3

SCCR: Class CC - 200kA

Midget - 50kA with KLK fuse

Terminal Style: Box Connector

Wire size: 1 wire #18-#4 AWG or

2 wires #18-#6 AWG

Indicating & non-indicating versions available..

Class CC & Midget Fuse holders

Sample part # Class CC: Non-Indicating: 31295.000

Sample part # Class CC: Indicating: 31298.000

Sample part # Midget Non-Indicating: 31110.000

Sample part # Midget Indicating: 31130.000

LHFB001 Inline Fuse HolderThe Littelfuse LHFB waterproof inline fuse holder is ideal for harshenvironments. The easy to assemble one-piece molded thermoplasticbody is a bright green color for high visibility. The LHFB holder ac-cepts #12 to #18 gauge wire and features the voltage and amperage rating molded into the body, along with a wire strip gauge. Withstands solvents and vibration, for use with 1/4” x 1-1/4” fuses.

• Voltage Rating: 32V• Ampere: 30A

Fuse Holders - Reducers - Pullers - Clamps


Amp Rating: up to 30A,

Interupting Rating: 200kA( with Class CC fuse)

• Simple installation• Reduces inventory requirements• Silver brazed joints for maximum strength

8


Approvals:

Approvals:

Approvals:

Approval:

Approval:

Approval:

Sample part # 571-007

Sample part # LCC 5

Littelfuse Special Purpose fuses are designed for specialty applications. They provide protection to lighting systems, battery operated equipment, and service entrance conductors. Available in a wide range of voltage and ampere ratings to accommodate a variety of applications.

LGR series FusesFast-Acting300 VAC1/2 - 15 amps10,000 AIR

LMF series fusesTime-Delay300 VAC3/10 - 10 amps10,000 AIR

CBO/CCK/CCL series fusesFast-acting (CBO)Time Delay (CCK, CCL)32 VDC (CBO), 125 VDC (CCK, CCL)1 - 300 amps

Special Purpose Fuses

Automotive Fuses• Voltage Rating: 32V AC/DC

• Ampere Range: 1 - 500 amperes

• Slo-Blo®: MAXI™ (299 series), MEGA®, MIDI®

• Fast Acting: ATO® (257 series) MINI® (297 series)

MAXI 299 seriesSLO-BLO®32V AC/DC20 - 80 amps

MEGA seriesSLO-BLO® Bolt-On32V AC/DC100 - 500 amps

ATO 257 seriesFast Acting32V AC/DC1 - 40 amps

MINI 297 seriesFast Acting32V AC/DC2 - 30 amps

Sample part number: MIN-25

Selected Automotive Fuses:

Daito fuses are frequently used in machine tools, CNC and robotic equipment, telecom-munications and equipment from Fanuc, Yaskawa, Toshiba and NEC. They are AC/DC rated fuses with an integral alarm contact that is closed on fuse operation, signalling that the fuse has operated. They are a unique size and cannot be interchanged with other fuse types.

Fuse Types: MP, SMP/SDP,GP,P3,P4,

P4H,P4L,SP3,SP4,HP

Voltage Rating: 60 -250VAC/DC

Ampere Rating: 0.32A - 15A

Interupting Rating: Up to 10kAIR

Approvals:

Daito Fuses

7017240 - 6mm x 32mm 1000VAC/VDC

• 1000VAC/DC UL

• Ultra fast acting (FF)

• 0.315, 0.5, 0.8, 1, 1.6, 2A

• Use in test leads

• Designed for long life in severe condition

• Shock & Vibration tested to 30G series

The Littelfuse FLU series is designed specifically for the protection of multimeters.The 1000 VAC/VDC rating also makes the FLU ideal for a variety of other applications.

• Voltage Rating:

1000VAC/DC• Interrupting Rating:

FLU.440 10kAFLU 011 20kA• Ampere Range:

FLU44 - 44/100AmpFLU11 - 11Amp

Sample part #: FLU44

replaces competitor’s: FSM, DMM

CNL/CNN series fusesFast-acting (CNL)Very fast-acting (CNN)32 VDC (CNL), 48 VDC (CNN)10 - 800 amps

Multimeter Fuses

Lighting Fuses Forklift & Battery Fuses

9


Approvals:

Approvals:

DAITO

TFCF fuses are current limiting fuses designed for the unit fusing of 600v (orless) capacitors. They are threaded for M12 metric capacitor bushings, butmay be adapted to other thread patterns with the adapters shown below.

Voltage Rating: 600VACAmpere Rating: 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200A Interrupting Rating: 200kA Approval:

TFCF 600V Capacitor Fuses

Telecomm Fuses

Specifically designed for use withTelecommunications circuits. LittelfuseTelecom products provide reliable protectionto sensitive DC power distributionsystems. The compact design andmultiple mounting configurations allowflexibility for the designer.

L17T series fuses170 VDC70 - 1200 amps100,000 amps I.R.

TLN series fuses170 VDC1 - 600 amps100,000 amps I.R.

TLS series fuses170 VDC1 - 125 amps100,000 amps I.R.

481 series alarm fuses125V AC/DC18/100 - 20 amps1000 amps I.R.

LTFD series disconnect switches60-145 VDC1 - 1200 amps

TCCF 2.4/4.8kV Capacitor Fuses

TCCF fuses are current-limiting, partial range fuse designed for the individual unitfusing of three phase capacitors in metal enclosed equipments. They are non-indi-cating and non-disconnecting

Voltage Rating: 2.4kV: 100A &125A 4.8kV: 25A - 75AAmpere Rating: 25, 50,75,100,125 IR Rating: 50kA

• Direct stud-mounting on 1/2-13 capacitor studs eliminates seperate holder.

• replaces Westinghouse, GE and some McGraw fuses

• Adapters are available below to convert to other stud threads

SIBA Capacitor Fuses

Siba capacitor fuses offer increased volt-age and amp ratings for larger capacitor applications. They feature ceramic bodies and higher interupting ratings. Imperial UNC thread pattern is standard. Metric styles also available.

Voltage Rating: 4.8kV, & 7.2kV, 15.5kVAmpere Rating: 6.3A - 200Amp Interrupting Rating: 63kA

Material - unplated free cutting brass

Thread patternsStud Receptacle P/N3/8-16unc M12 S38-R121/2-13unc M12 S13-R121/2-13unc M16 S13-R16M12 3/8-16unc S12-R38M12 1/2-13unc S12-R13M16 1/2-13unc S16-R13M10 M12 S10-R12

Metric/UNC Adapters

10


Approvals:

Stud

Receptacle

Sample part # TFCF-125 Sample part # TCCF-125

For use with our stud mounted Capacitor fuses.

Designed to protect today’s equipment and systems, Littelfuse semiconductor fuses are manufactured with Littelfuse-developed technology that sets tomor-row’s standards for accuracy, consistent quality, reliability and predictable perfor-mance. By using advanced metallurgical, polymer, and materials research; math-ematical modeling, and computerized statistical analysis; Littelfuse engineers have redefined “State-of-the-Art.”

Sample part number: L25S200

Semiconductor Fuses 150/250/500/600/700 VAC Very Fast Acting

11


Approvals:

SpecificationsVoltage Ratings

L15S: 150 Vac/dc (1 – 60 A) 150 Vac (70 – 1000 A) 100 Vdc (70 – 1000 A)L25S: 250 Vac/dc (1 – 200 A) 250 Vac (225 – 800 A) 200 Vdc (225 – 800 A)L50S: 500 Vac/450 VdcL60S: 600 VacKLC: 600 VacL70S: 700 Vac/650 Vdc

Interrupting RatingAC: 200 kA rms (L15S series 100 kA)DC: 20 kAAmpere Range: 1 – 1200 ASee Rating Table for ratings available in each series.Approvals UL Recognized (File: E71611)CSA Recognized (File: LR29862)

AmpereRatings

Series Ordering information

L15S L25S L50S L60S KLC L70S

1 L15S001 L25S001 - L60S001 KLC001 -

2 L15S002 L25S002 - L60S002 KLC002 -

3 L15S003 L25S003 - L60S003 KLC003 -

4 L15S004 L25S004 - L60S004 KLC004 -

5 L15S005 L25S005 - L60S005 KLC005 -

6 L15S006 L25S006 - L60S006 KLC006 -

7 L15S007 - - - KLC007 -

8 L15S008 L25S008 - L60S008 KLC008 -

9 L15S009 - - - - -

10 L15S010 L25S010 L50S010 L60S010 KLC010 L70S010

12 L15S012 L25S012 L50S012 L60S012 KLC012 -

15 L15S015 L25S015 L50S015 L60S015 KLC015 L70S015

17.5 - - - L60S17.5 KLC17.5 -

20 L15S020 L25S020 L50S020 L60S020 KLC020 L70S020

25 L15S025 L25S025 L50S025 L60S025 KLC025 L70S025

30 L15S030 L25S030 L50S030 L60S030 KLC030 L70S030

35 L15S035 L25S035 L50S035 L60S035 KLC035 L70S035

40 L15S040 L25S040 L50S040 L60S040 KLC040 L70S040

45 L15S045 L25S045 - L60S045 KLC045 -

50 L15S050 L25S050 L50S050 L60S050 KLC050 L70S050

60 L15S060 L25S060 L50S060 L60S060 KLC060 L70S060

70 L15S070 L25S070 L50S070 L60S070 KLC070 L70S070

80 L15S080 L25S080 L50S080 L60S080 KLC080 L70S080

90 L15S090 L25S090 L50S090 L60S090 KLC090 L70S090

100 L15S100 L25S100 L50S100 L60S100 KLC100 L70S100

110 - - - - - -

125 L15S125 L25S125 L50S125 L60S125 KLC125 L70S125

150 L15S150 L25S150 L50S150 L60S150 KLC150 L70S150

175 - L25S175 L50S175 L60S175 KLC175 L70S175

200 L15S200 L25S200 L50S200 L60S200 KLC200 L70S200

225 - L25S225 L50S225 L60S225 KLC225 L70S225

250 L15S250 L25S250 L50S250 L60S250 KLC250 L70S250

275 - L25S275 L50S275 - - -

300 L15S300 L25S300 L50S300 L60S300 KLC300 L70S300

350 L15S350 L25S350 L50S350 L60S350 KLC350 L70S350

400 L15S400 L25S400 L50S400 L60S400 KLC400 L70S400

450 L15S450 L25S450 L50S450 L60S450 KLC450 L70S450

500 L15S500 L25S500 L50S500 L60S500 KLC500 L70S500

550 - - L50S550 - - -

600 L15S600 L25S600 L50S600 L60S600 KLC600 L70S600

700 - L25S700 L50S700 L60S700 KLC700 L70S700

800 L15S800 L25S800 L50S800 L60S800 KLC800 L70S800

900 - - - - - -

1000 L15S1000 - - - - -

1200 - - - - - -

British Semiconductor Fuses (BS88)

These fuses are British dimension, ultra fast acting types for the protection of semicon-ductor devices such as diodes, rectifiers, SCR's, thyristors, soft starts or inverters.

• High interrupting rating 100 kA

• Voltage rating AC 240 V – AC 700 V• Protection of Power Semiconductors

according to IEC 60269-4

• Complies with BS 88 Standard• with or without striker for microswitch

operation.

• Class aR 5 A – 900 A according to IEC 60269-4

These fuses are available in 6 different sizes. They can be fitted with or without built-in striker pin for fuse blown indication or operation of microswitches.

• Approval:

• Standard: IEC 60269-1 and -4

• DIN VDE 0636-23

• UL 248-13

• Class: gR/aR/gRL

• Current ratings: 125 mA – 200 A

• Size and voltage rating:

• 6.3 x 32 mm: AC 400 – 1000 V

• 10 x 38 mm: AC 600 – 1000 V

• 14 x 51 mm: AC 690/700 V

• 20 x 127 mm: DC 1000/1500V

• 22 x 58 mm: AC 690/700 V

• 27 x 60 mm: DC 440/660 V

• Fuse-Bases / Fuse-Clips and Accessories are available

European fuses are used in imported equipment, or in projects destined overseas. Eurofuses are available in two broad categories - bottle fuses and square body fuses. Both categories have many different types within the group. All Euro-pean fuses are current and energy limiting.

Operating classifications:

gL, gG, General purpose characteristic for distributionaM Back up characteristic for motor circuitsgR Ultrafast characteristic for semiconductor circuits.

Voltage Rating: 380 - 690VAmpere Rating: 2 - 750AInterrupting Rating: 100 - 120kASpeed: aR, gG, gR, gRLSizes: 00, 000, 1, 2, 3

Eurofuses Bottle and NH Metric Ferrule Fuses

Usually found in imported equipment. Available in the following characteristics;

F = Fast - overload and short circuit.aM = medium - overload and short circuit.gL/gG = General purpose-overload and short circuit.aM = Motor circuit - short circuit only.

Voltage Rating: 250,380, 500, 690VACAmpere Rating: 0.032A - 100ASpeed: aM, F, gL, gG, Sizes: 5x20mm, 6x32mm, 8x32mm, 10x38mm, 14x51mm, 22x58mm

Not all Ferrule fuses carry the CSA or cRU. For additional information see Fusetek Specialty Catalogue or visit www.fusetek.com

Semiconductor Fuses



DIN 43625 fuses come in 5 case sizes - 000, 00, 1, 2, & 3. Within these case sizes - UR fuses come in two voltage ratings (700 & 1400Vac) and two fixing centers (80 and 110mm). These fuses can easily be fitted with a microswitch for remote annunciation or may be used without this option.

Voltage Rating: 700 - 1400VACAmpere Rating: 50 - 3000AInterrupting Rating: 200kASizes: 1, 2, 3 and 4Standards:

Matching fuse bases available

URS Square Body Rectifier Fuses

IEC, CEStandards:

Cylindrical Ultra-Rapid

Approvals:

Approvals:

Solar

KLKD Series

The SPF Solar Protection Fuse series has been specifically designed for the protec-tion of photovoltaic (PV) systems. This family of Midget style fuses (10 x 38 mm) can safely protect PV modules and conductors from reverse overcurrentconditions.

Voltage Rating: 1000 VDCAmperage Rating: 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30Max. Interrupting Rating: 20 kA

SPF Series

The SPFJ series is the smallest 1000 VDC 70-450 A photovoltaic fuse available in the market. The SPFJ series is manufac-tured in Class J case sizes that allows for both fuse holder and busbar mounting configuration.

SPFJ Series

Voltage Rating 1000 VDC600 VAC (125-450 A)Amperage Rating 70, 80, 90, 100, 125, 160, 200,250, 300, 350, 400, 450Interrupting Rating AC: 200 kAIC (125-450 A)DC: 75-200 A: 20 kAIC250-400 A: 10 kAIC450 A: 20 kAIC

Voltage Rating: 1000 VDCAmpere Ratings: 250, 300, 350 and 400 AInterrupting Rating: 10kAFuse Type: Fast-Acting

The SPFR series was designed to meet the growing needs of the solar industry with higher amperage and voltage requirements. It was developed specifically for solar applications ranging from 250 A to 400 A.

SPFR Series

31971 & 31973 Series 1000VDC “Dead Front” Holders

The 1000VDC midget fuse holder series is a touch-safe design providing protection to per-sonnel when installing and removing fuses. The compact fuse holder mounts quickly onto 35 mm din rail decreasing panel layout and assembly time.

SIBA’s 1000VDC Dead Front holders provide optimum protection to personnel for 14x51mm Style fuses.

Voltage Rating: 1000VDCAmpere Rating: 50ADegree of Protection: IP-20 Poles: 1, 2,

Voltage Rating: 1000 VDCAmperage Rating: 30 amperesWire Range: #6 - #14 CU 75°CTerminal Type: Pressure PlatePoles: 1

Fast-acting, high-interrupting capacity, current-limiting type fuse. Especially suited for DC control circuits and Solar string fusing.

• 600VAC/DC • CSA/UL Approved• 1 - 30A• 50kAIR DC







5105805.1SDC Series 1000VDC 14x51mm Fuse Holder



Approvals: Approvals:


Approvals:

Approvals:

Sample part number: KLKD-15

Sample part number: SPFR-200

Sample part number: SPF030

Sample part number: SPFJ100

Sample part #:n Non-Indicating

1 Pole - 5105805.1SDC2 Pole - 5105805.2SDC

Non-Indicating Part No.: 31971.000Indicating Part No.: 31973.000

7017240 - 6mm x 32mm 1000VAC/VDC

• 1000VAC/DC UL

• Ultra fast acting (FF)

• 0.315, 0.5, 0.8, 1, 1.6, 2A

• Use in control circuits

• Designed for long life in severe conditions

• Shock & Vibration tested to 30G series

5019906 - 10mm x 38mm 1000VAC/DC

• 1000VAC/DC• 0.5, 1, 2, 4, 6, 8, 10, 12, 16A• Max. I.R 38kA(L/R=1ms)• Ultra fast Acting• Standard Midget format• Use with 1000V rated holders and in

DMM’s



Overview of standard PV products Available

DIMENSIONS RATED VOLTAGE

RATED CURRENT

MM/SIZE V A

10 X 38 1000VDC 4 - 16

14 X 51 1000VDC 10 - 25

10 X 51 1100VDC 6 - 20

10 X 85 1100VDC 2 - 20

NH1 1100VDC 50 - 200*

NH3 1100VDC 50 - 400

20 X 127 1500VDC 2 - 63

* UL pending** cRUus

PV NH1 2002820

• 1000VDC • Size NH1• 50 - 200A• Larger ampacities• Indicating /Non indicating versions


LFJ1000 Solar Series

The LFJ1000 series fuse block is spe-cifically designed for the Littelfuse SPFJ 1000 V Solar Fuse. It meets UL electrical requirements, is available in multiple am-perages, and comes in a variety of fuse mounting and termination configurations; fuse clip to box lug, fuse stud to wire studand fuse clip to wire stud.

ALTERNATIVE POWER SOLUTIONS ALTERNATIVE POWER SOLUTIONS

5106304.DC 1000V 10mm x 38mm Fuse Holder

• 30A / 1000VDC• Din-Rail mountable• Non Indicating• 1 & 2 Pole• Gangable

Solar

14

Approval:

Approval:


Approvals:

Approvals:Voltage Ratings: 1000 VDC

Ampere Ratings: 200, 400, 450 A

Flammability Rating: UL94 V-0

Termination Type: Box Lug or Stud Mount

Sample part # 7017240-00.315



Sample part # LFJ102001CST

The new AMBUS ® EasyLiner is a cost saving solution to building positive solar combiner assemblies. Fuse holders mount directly to busbar, insuring good connection, cool running and simplifies assembly up to 40 strings.

Advantages• Time and cost savings

• Fuse holders mount directly to the busbar, simplifying system

• Minimizes assembly and wiring

• System uses standard bus bars, terminals and supports

DC Isolator Switches

Our Solar Isolator range has been specifically developed as a True DC load-break switch for DC applications up to 1000VDC

Voltage Rating: 1000 VDCCurrent: 16A - 400APoles: 2 - 8 polesMount : Panel, Enclosed, Base mount, Door interlockLockable: Yes

Approvals:

Available in either Lever Actuator, Rotary Actuator.

UL, IEC

The IMO Solar Cube is a PLC based controller for positioning & controlling solar tracking arrays. It has the flexibility to adapt to any installation and features integrated data logging capability for energy reporting.

• 3.5” Monochrome Touch Screen• 5 Pre-programmed function keys• Built-in sun positioning algorithm• 3D Compass input for accurate positioning. • Automatic location and clock updates with optional GPS module• MicroSD card for data logging• GPRS and Ethernet Remote Access options available• Single array & 4 array

Those are just some of the features of the SolarCube from IMO

Fuse holder part No.31572 - mounts on 20x5/10mm31570 - mounts on 30x5/10mm

Voltage Rating: 1000VDCAmpere Rating: 30AMax Current: 630A


Solar

SolarCube

Easyliner

15



Approval:


HV DIN Fuses.A complete line of DIN HV fuses are partial-range high voltage current-limiting fuses for use in distribution circuits from 2.3 - 38kV.

R-Rated Back-up Protection • 2.75kV - 2R – 24R• 5.5kV - 2R – 38R• 8.25kV - 2R – 24R

Voltage Rating: 7.2kV, 17.5kV, 25.8kV, 38kVRated Current: 400A & 600AFor Fuse sizes: 192mm, 292mm, 442mm,537mmOperator position:left or right

Medium Voltage FusesLittelfuse Medium Voltage fuses are available with conventional ferrule type, clip lock and bolt-in mounting configurations for flex-ibility in a variety of applications.

E-Rated General Purpose Fuses

• 2.75kV - 10E – 450E• 5.5kV - 10E – 600E• 8.25kV - 10E – 400E• 15.5kV - 10E – 300E• 25.8kV - 15E – 100E• 38.0kV - 3E – 80E

R rated Motor Fuses

E-Rated General Purpose Fuses“E-rated” fuses are general purpose fuses that protect againstboth low and high values of fault current. These fuses have timecur-rent characteristics designed to provide current limiting protectionfor power transformers, power centers, feeder circuits and unitsubstations.

E-Rated Potential Transformer FusesPotential Transformer (PT) fuses are current limiting fuses withhigh interrupting ratings designed for the protection of potentialtransformers.

R-Rated Back-Up Protection Fuses“R-rated” fuses are designed to protect against only high values offault currents and should be applied only as back-up protection.They provide required short-circuit protection for medium voltagemotors, motor controllers, and associated circuitry. However, theymust be used in series with other devices, such as motor overloadrelays, to achieve both overload and short circuit protection.

R rated fuses are current and energy limiting fuses intended for the backup protection of medium volt-age motor control. They are nonventing. They have integral striker/indicators and have standardized dimensions compatible with today’s 5.5kV motor control gear. They are fully interchangeable with other manufacturers’ fuses of the same type and rating.

PT series fuses are current limiting, non-indicating, partial range HRC fuses available in a variety of voltage, amperage and interrupting ratings. FC & NPT series are North American dimensioned PT fuses and provide equals to Westinghouse and CGE. BPT series are Brit-ish dimensioned PT fuses and offer equals to GEC, Brush, CCL, and EMP.

North American Dimensions:

Fuse Diameter: 13/16”, 1”, 1-9/16”

Voltage Rating: 625VAC - 25.8kV

Ampere Rating: 0.25E - 20E

Interupting Rating: 32kA - 40kA

PT FUSES

• 3/7.2kV - 6.3 - 500A• 6/12kV - 6.3 -315A• 10/17.5kV - 6.3 - 200A• 20/27.6kV - 6.3 - 125A• 20/36kV - 6.3 – 100A• 38.5kV - 6.3 - 63A

Capacitor fuses are current-limiting, partial range fuses designed for the individual unit fusing of three phase capacitors in metal enclosed equipment. They are non-indicating and non-disconnecting.

Voltage Rating: 4.8kV: 25A - 75A 2.4kV: 100A -125A

Ampere Rating: 25, 50, 75, 100, 125AInterrupting Rating: 50kA m.b.c.: 200% of rating

Sample part number: TCCF-050

Other Capacitor fuses available from:7.2kV,12kV, 13.8kV, 17.5kV & 25.8kV

Note: Add "B" suffix for M12 Boss at one end &1/2-13 boss at other end.

Capacitor Fuses

load-break switches & Grounding switches

LDTP Series

Available with or without Auxiliary contacts for control and signalization

DEP Series Grounding switches (3pole)Max voltage: 7.2kV, 17.5kV, 25.8kV, 38kVShort time Current: 25kA & 38.1kAOperator position:left or right

Available with or without Auxiliary contacts for control and signalization

High Voltage

16


Sample part # 15E1C8.25

Sample part # MVR5/09R-DI

Sample part # FC467-1E

High Voltage Accessories

HV Microswitch 3100110

KF22-12 HV Indicator

HV Bases

Fuse Clips

EPOXY Insulators

We carry a range of epoxy resin insulators from 7.2kV to 38kV. Tapped brass inserts can accomodate a wide range ofequipment.

Never have to open a live HV cabinet again to check for voltage!. Bolt these line indicators onto any convenient live part and the high brightness LED cluster will flash to indicate presence of voltage.

Rated for 2.5kV - 38kV

Need more than visual indication? Our remote mount microswitch is good for all systems up to 38kV. The insulated Bowden cable is actuated by the fuse striker which then actuates the microswitch at the other end. Includes mounting bracket at both ends.

Medium voltage bases

Fusetek can supply single or 3

pole bases for most of the medium

voltage fuses we supply.

Delle fuses are now obsolete, but there is a large installed base of fuses that need replacing. Our adapter kits replace the existing Delle live parts and convert the Delle fixing centers to accept a modern, easily obtainable DIN HV fuse.

• Direct bolt-on replacement.• Upgrades to modern DIN fuses.• High pressure clips, hardware and conversion plates

We carry Fuse Clips to fit all our HV fuses.

Size: 1” to 3” Reinforced spring clipSize: 45mm Spring clip 45mm Spring clip with hot stick loopAmp Rating: 60A, 200A, 400A, 600A

Always in stock

Rated Voltage: 7.2 - 38kV

17


Part Rated Voltage

RV6090 5kV

RV60155 15kV

RV70210 24kV

DWA30A 38kV

DELLE Adapter Kits

T1 & T1E Series Duct

• 4 Styles of Duct• 35 duct sizes• 40+ components & Accessories• No cover charge. Each length comes with cover.• 2 meter length invoiced at 6 feet. Thats an extra 9% of duct free!• Available in white, grey, blue and black

Cable mounts that STICK!

Part Number Pack Qty*ICM-75 100

ICM-100 100

CL Wire Retainers

Retains wires during installation. Provides additional strain relief of fingers. Eliminates bulging against sidewall.

Available in light grey or black. IP-65 Rating

Dinosaur Flexible Duct

Dinosaur Duct is a unique product of-fering from IBOCO that is a flexible, resilient and efficient harnessing solution to your bundling needs. For wiring to cabinet doors, from control panels and for electronic equipment.

Cable Ties & Stickies

RoHS

I-Flex liquid-tight non metallic conduit

Spiralite Wrap & Braiding• Available in 4 sizes.

• Natural / White

• Polyethylene Natural (P)

• Polyethylene self extinguising (PA)

• Braided Sleeving available in 5 sizes.

IBOCO®'s straight and right angle (90º) liquid-tight non-metallic con-nectors are designed to fit with the company's line of flexible liquid-tight PVC tubing to ensure leak-proof integrity on motors, processing equipment, pumps, etc

• A liquid-tight environmental seal• Quick re-entry for cable repair or rerouting• recognition• certified• IP 65-rated for watertight applications

Panel Building Products

Approvals: IEC

• 4 pole to 54 poles• Transparent Cover• Optional lock• Mount any standard DIN rail device• IP65 / NEMA 4

IBOCO Enclosures are an architecturally appealing enclosure designed for use as instrumentation housings, electrical junction boxes, terminal wiring boxes and as hous-ings for electrical controls. The integral DIN rail makes mounting components a snap.

• MATERIAL: 6/6 Nylon• COLOR: NATURAL - BLACK

Length: 4.1” - 28”Tensile Strength(lbs):18, 40, 50, 120Max. Bundle Dia.: 22 - 203mm

ICB Enclosures

18

Approvals:

Approvals:


Tools and Cutters

• B4 & B6 rivet tool (Plastic)• RT4-RT6 (all metallic)• WT-2 Duct and Tube cutter• SX-15 Duct cutter• ITT1 & ITT2 Installation tools

Busbar System

LEDTEC 22mm Pilot LightsThe last pilot light you will ever replace. 100,000 hours, super bright, power saving and immune to heat and vibration.

Voltage rating: 12vac/dc,24vac/dc, 48vac/dc, 110/120vac, 110/120vdc, 230VacColours: Red, Green, Amber, Blue, White

Sample Part Number: LEDTECR110/120Vac

• Very bright Multi Chip LED bulb • Standard 22mm format• Direct wire to integral rear terminals • Shock resistant• 1 piece design, - one part number • Oil and dust tight• IP65 • 20% voltage tolerance

BA9S LED’s are high brightness LED bulbs with industry standard BA9S bayonet bases. They will fit into any standard 22mm or 30mm pilot light that accepts BA9S bulbs. Their solid state design and long life makes incandescent bulbs a thing of the past.

LED BA9s are available in industry standard colors and voltage ratings and allows LED upgrade from the front of the panel without having to open the door.

Going from 30mm to 22mm takes only a fewseconds with the BCR-AX adapter ring.

• Steel plated backing ring with anti-rotation notch• Fits panel thickness up to 14 gauge• No tools required• Available in black plastic.

BCR-AX Adapter ring BA9S LED’s

120Vac/dc

LEDTEC Series

LEDTEC

R=RedG=GreenA= AmberB=BlueW=White

12Vdc24Vac/dc48Vac/dc110Vac110Vdc230Vac

Catalogue number example

R

BA9SLED Series

BA9SLED

R=RedG=GreenA= AmberB=BlueW=White

6Vac/dc12Vac/dc24Vac/dc48Vac/dc120Vac/dc220Vac/dc

Catalogue number example

R120

Their current limiting design and high interrupt/voltage ratings make them vastly superior to residential or ‘push-to-reset’ MCBs.

JTECUL

JTEC489

E243696

JTEC Accessories

• Auxiliary Contacts

• Shunt trip

• Neutral pole

• Undervoltage release

• Safety lockout device

• Busbar

• Busbar connector terminal.

• Busbar cut end-cap.

• Front Mount Panel Adapter

• Panel mount adapter clip.


Voltage Rating: 600VAC (N.A.) 690VAC (IEC)Amp Rating: Busbar dependant 150 - 1800A in 7 sizes

SCCR rating: Unprotected - 18-30kA

MCB protected - 25-65kA

Fuse protected - 100Ka

Touch Protection: IP20

The Wohner 60mm system is a modu-lar busbar system that allows an un-precedented degree of design flexibility. The 60mm busbar centers allow large ampacities to be distributed in a very compact space while maintaining high short circuit current ratings (SCCRs).

JTECULVoltage Rating: 277/480VACAmperage Rating: 0.5 - 63ATrip Curve: B, C, DPoles: 1, 2, 3

JTEC489Voltage Rating: 277/480VACAmperage Rating: 0.5 - 63ATrip Curve: B, C, D & KPoles: 1, 2, 3Note: 35-63A 240VAC

19

Approval:

Approval:

Thermal/Magnetic Circuit Breakers


• 10A - 1200A AC3 / 4kW - 680kW• DIN-rail mounting up to AC3 74A• Coils: 24, 120, 230, 240, 575V• 50/60Hz• DC coils available

MCOR Series Overload Relay (thermal)

Temperature compensatedTrip and alarm contacts

Amp Range: 0.12 - 74A

MC Series

StartersMU Manual Series

• Amp Range: 0.16 - 25A• Overload protection• Short circuit protection• Overload built in to start

Accessories - Aux. Contacts, molded enclosure(IP55) Locking bracket, Mushroom stop button

DOL enclosed Magnetic Starter

• up to 7.5kW• IP65• Start Stop buttons• Pre-wired to accept overload

DOL Type: DOL_10 & DOL_18Standard coils: Same as MC seriesRatings AC3 /400V: 10A(DOL_10) 18A(DOL_18)

69 Series Isolators 600VAC

• 3 and 4 pole

• Load break 20 - 125A

• Red/yellow or black handles

• 3 pad lock positions

• Lightweight ext. shafts 100-400mm

• Side mount auxiliary contacts

PE69 - IP65 enclosedLB69 - Base mount door interlockPM69 - Front panel mountDM69 - Direct handle base mount

Industrial Power Relays

IMO offers a comprehensive Industrial power relay line.

2PCO and 3PCO Voltage Rating: 12, 24, 110 &230VACRated current: 10AMax. Switching: 250AC/30VDC

3PCO & 4PCO Voltage Rating: 12, 24, 110 &230VAC, 12, 24, 48, 110VDC Rated current: 5A (4PCO) 7A Amp (2CPO & 3CPO) 2PCO, Max. Switching: 250AC/24DC

HY series - Miniature General purpose

RS series - General purpose

TimersIMO's comprehensive range of 22.5mm DIN Rail Timers and Panel/plug-in timers delivers up-to-the-minute technology. Ultra compact design makes installation easy, even in the tightest of panels.

• 48 DIN panel mount/plug in range

• 22.5mm DIN rail mount range

• On delay

• Off/true off delay

• Recycling

• Star delta

• Multifunction

• 12 - 240VAC/DC options

TA8 Series - Plugin TD Series - DIN Rail mount


Contactors & Overloads


20

Approvals:

Approvals:

Approval:

Approvals:

MA Series

Micro Contactor

• >3mm contact clearance acc. to IEC 60335-1 for safety Applications.• Reversing contactor with mechanical interlock• 3 Pole and 1 Aux. Contact NO or NC• 5A AC3 @ 400VAC (2.2kW) • 12A AC1 @ 400VAC• AC coil voltages• TS15 Din rail mounting

Approvals:

Relay-size contactor, making it the smallest in the world.

Sockets

Popular Sockets

Socket Part Relay Rated VAC Pins Rated current

SRR8 300 8 15A (per pole)

SRR11 300 11 15A (per pole)

SRN2-S 300 12 12A (per pole)

SRSI 250VAC 6A (per pole)

IMO offers a comprehensive line of sockets. They are available in panel mount or DIN Rail Mount


Pilot devices & Push buttons and Cam switchesA full line of

• Push Buttons

• Emergency stop

• Cam switches

• Key operated rotary switches

• Illuminated push buttons

• Illuminated Operators

• Double push buttons

Contact blocks and lamp holders

• Label holder, legend plates, actuator caps

• 22mm

QB Photo-Electric SensorsThis miniature block sensor with diffuse, background suppression, retro reflective or through-beam capability is ideal for a wide range of industrial applications where space is at a premium.

• Thru Beam.

• Diffuse (with Background Suppression).

• Reflective photo-electric sensors.

• Simple push to teach with a variety of light sources

(Laser, Infra-Red, Visible Red).

• Light ON/Dark ON selectable.

Proximity Switches

• Capacitive & Inductive• Wide operating voltage 20-264VAC 50/60Hz• LED operation indicator• Shielded and unshielded models• IP67 nickel-plated brass housing• m8, m12, m18, m30• m12 plug or integral cable

IMO Limit Switches and safety limit switches are being installed and used daily in every type of industrial machinery, in every type of weather condition and in many different industry sectors, including Wood, Metal, Plastic, Automotive, Packaging and Lifting.

Compact Heavy Duty Limit Switches FM/FR/FZ/FXStandard Heavy Duty Limit Switches FD/FP/FL

Rope Operated Stop Switches FDRope operated safety switches for the pro-tection of exposed machinery.

• Lockout mechanism isolates safety

contacts until manually reset

• 12 and 35 meter rope length models

• Indicator of correct rope tension

• Fail-safe in the event of slack or broken wire rope

• Heavy duty die-cast metal alloy housing

• Single and triple conduit entry models

• IP66

Limit Switches & Safety Limit switches

• 10A 500VAC/600VDC rated

• Double-break contacts with electrically separate NO

and NC circuits

• Wide range of actuators

• Single and triple cable entry models

• Removable contact block for ease of wiring

• Turret head position rotatable in 90 degree incre-

ments

• Metal or plastic housing options

• IP66 according

Features common to both Standard and Heavy duty

IMO terminals are made of carefully selected standard materials. Insulating materials, clamping metals and conducting metals are subjected to strict quality control as required by stringent international standards.

DIN Rail Terminals

• 2.5mm to 240mm

• polyamide 6.6 material

• -40c to +100C

• screw and screwless option

• 8 colour options

21

Approvals:


3 Phase: 0.37-710kW (0.5-950HP)Jaguar VXG High performance Drive

• Integrated EMC Filter (EN61800-3 2004 cat C3)

• V/F, Torque Vector and closed loop control

• 200% starting torque between 0.3-5Hz

• Improved open-loop low-speed stability

• Safety input: digital input to enable/disable the IGBT devices of the inverter output stage

• Mechanical brake control output - torque generated

• PID thermistor input

• Encoder feedback (closed-loop) and shaft synchronizing options

• Internal brake chopper up to 22kW (30-110kW upon request)

With an ultra-fast CPU its reaction to sudden load changes response time is unsurpassed, and with up to 300% torque on tap the VXG has the power to drive even the most demanding of applications with ease whilst keeping cool and in control with its extensive parameter set and communication options.

Automation

@ 480VAC



iSmart RelaysIntelligent relays for precise controls

iSmart is a tiny intelligent relay / PLC hav-ing a 44 I/O point system that uses ladder graphic and FBD programs for applications in automation systems. Ismart can expand up to 3 groups of 4-input-4-outputs modules.

Multiple out putsMax 200 ladder step instructionMany built-in application instructions• Timer• Counter• Analog comparison• Upper and lower differentiation• PMW function• Datalink function• Remote I/O• HMI function

IMO's i3 line of controller offers a unique solution since it is both a PLC and HMI combined in one device. It is also, small, very powerful and has many unique con-nectivity features. One such feature is the GRPS modem option, which is ideal for applications where the controller needs to be accessed remotely.

Available units• i3A - Mono 128 x 64• i3B - Mono 160x128 touch screen• i3C - Colour 320 x 240 touch screen• i3C - Mini colour 320x240 touch screen• i3D - Colour 640x480 touch screen• i3H - Graphic based 800x600 touch screen• All units come with free software and updates

i3 Controllers

DPS Power Supplies

• High efficiency

• Short circuit protection

• internal input filtering

• PFC function available

• Parallel function available

IMO's DPS range of AC/DC Din Rail mountable power supplies have been designed especially for the Control & Automation Market. Offering the benefits of slim lines, universal input, AC/DC operation and the security of a 3 year warranty.

Universal input voltage range:85V - 265VACStandard output:24VDC

Micro Switches MK SeriesGeneral purpose microswitches for heavier duty applications.

• High precision snap action mechanism

• 16A 250V AC resistive rating (Ith)

• Wide range of actuator styles

• Screw terminals with self lifting plate

• 10 million mechanical operation cycles

• Protection degree IP20, IP40 or IP65

• Versions with positive opening

• Mechanically interchangeable with previous

• products (see cross reference section)

MTCE-LEDTEC22MM Pilot Lights

Description Colour Qty Ea.

LEDTEC 110/120Vac R, W, B, G, A 5LEDTEC 24VAC/DC R, W, B, G, A 5BCR-AX 30mm - 22mm Adapter ring 5R=RED, W=White, B=Blue, G=Green, A=Amber

P/N MTCE-CC

Class CC

Description Fuse Amps QtyEa.

CCMR 600Vac Time Delay 0.5, 1, 3, 5, 10, 15, 20,30A 5KLKR 600Vac Fast Acting 5, 10, 15, 20, 30A 5MFP Fuse Puller 3/16” - 1/2” Dia. 1Free Fuse Puller included in Kit.

P/N -MTCE-J Time delay

Class J T/D

Description Fuse Amps QtyEa.

JTD-id 600Vac T/D10, 15, 20, 30, 40, 50,60A 580, 100A 3

LRUJ63 Fuse Reducer 600Vac Class J 60-30A 3LPFP Fuse Puller 9/16” - 1-9/32” Dia. 1

P/N - MTCE-R600 Time DelayClass RK5 Description Fuse Amps Qty

Ea.FLSR-id 600Vac T/D 10, 15, 20, 30, 60, 100A 5LRU-663R Fuse reducer 600V Class R 60-0Amp 1LPFP Fuse Puller 9/16” - 1-9/32” Dia. 1

P/N - MTCE-R250 Time TelayClass RK5 Description Fuse Amps Qty

Ea.FLNR 250Vac T/D 5, 10, 15, 20, 25, 30A 5FLNR-id 250Vac T/D 40, 50, 60A 5FLNR-100id 250Vac T/D 100A 3LRU-263R Fuse Reducer 250Vac Class R 60-0Amp 1LPFP Fuse Puller 9/16” - 1-9/32” Dia. 1* 5 - 30Amp are NON Indicating.

P/N - MTCE-BA9S BA9S Description Colour Qty

Ea.BA9SLED 120Vac/dc R, G, A 10BA9SLED 120Vac/dc W, B 5BA9SLED 24Vac/dc R, G, A 10BA9SLED 24Vac/dc W, B 5R=RED, W=White, B=Blue, G=Green, A=Amber

P/N - MTCE-GLASS

1/4 X 1-1/4” Description Fuse Amps Qty Ea.

312 (Glass) 250Vac Fast Acting 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 8, 10A 5

314 (Ceramic) 250Vac Fast Acting 15, 20, 30A 5

313 (Glass) 250Vac Slo-Blo 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6.25, 8A 5

326 (Glass) 250Vac Slo-Blo 10, 15, 20, 25, 30A 5

5 x 20mm

217 (Glass) 250Vac Fast Acting 0.25, 0.5, 1, 1.6, 2, 2.5, 3.15, 4, 5, 6.3, 8, 10A 5

218 (Glass) 250Vac Slo-Blo 0.5, 1, 2, 3.15, 4, 5, 6.3, 10A 5

Fuse Holders03420858X Straight 1/4” Nema Q.C 3AB Panel Mount 250V / 20A 5

150-079 19” inline fuse holder for 1/4” x 1.25” 32 V/ 20A 2

150-274 1P,10A/32V for 5x20mm 2

354-901GY 1P, 30A/300V 1/4”Nema for 1/4”x1.1/4” 5

097023 Fuse Puller 5x20mm, 1/4 - 1-1/4” & Auto fuse 1

Free Fuse Puller included in Kit

All maintenance kits can be modified to suit your requirements. Every kit comes packed with all the right fuses so your never get caught short. Just give us a call or ask your Fusetek rep.

Maintenance Kits



VJ Series

Approvals: • UL 508 NEMA 3, 3R, 4, 4X, 12 & 13• CSA 3, 3R, 4, 4X, 12 & 13• Lloyd’s Register of Shipping

ARIA Series

Approvals Rating(s): IP65, IP66

Rating(s): IP66-11

• UL types 3, 3R, 3S, 4, 4X, 12 and 13 per UL 508• CSA types 2, 3, 3R, 3S, 4 4X, 12 and 13• Lloyd’s Register of Shipping

Poly Safe (PS) Series

Approvals • UL types 3, 3R, 3S, 4, 4X, 12 and 13 per UL 508• CSA types 2, 3, 3R, 3S, 4 4X, 12 and 13• Lloyd’s Register of Shipping

Rating(s): IP65,

Fiberglass Enclosures

• Standard JIC dimensions in 7 sizes from 6”x6” to 18”x16” with varying depths. • Available in plain, raised, clear or windowed covers.• Moulded-on mounting flanges.• Stainless steel or non-metallic hinges.• Moulded grid pattern on inner lid simplifies layout.• Different cover closures available.

• Accessories – Instrumentation windows, steel, aluminium or non-metallic backplates, inner hinged covers, vents, back pan standoffs.

Vynckier Fiberglass Enclosures

• RAL 7035 FRP (fibre reinforced polyester) material is maintenance free, with excellent resistance to UV, corrosion and most chemicals.• Use indoors or outdoors -temperature range from -50*C to 150*C. Momentary to 200*C• Readily worked with standard tools, easy to handle and lighter than metallic enclosures.• Windows, if required are made from 1/4” transparent Lexan polycarbonate.• Total protection against electrical shock.• Poured in place polyurethane gasket ensures high NEMA ratings.• Custom CNC machining service available for all box series• Global approvals

All fiberglass enclosures are:

• Chemical Processing• Waste water treatment plants• Marine installations• Oil refinery• Mining sites• Pulp and Paper Mills• Temporary connections• Public utilities

• Electroplating plants• Food processing plants• Off Shore platforms• Photovoltaic• Sewage plants• Ship yards• Steel mills• Breweries

Application range:

• 14 sizes from 20 x 20” to 50 x 40” • Up to 3 depths using collar extensions• Special coating to enhance resistance to UV radiation.• Wall mounted or free standing• Can be coupled horizontally or vertically with gasketed collars.• 3 to 5 point door closure system ensures seal integrity

• Accessories – key locks, adjustable mounting hardware, rain hoods, floor pads, inner cover panels, gasketed windows, rear doors.

For complete dimensions on all the enclosure series please visit www.fusetek.comAnd download the Vynckier catalogue

24

• 7 sizes ranging from outside dimensions of 12” x 8” up to 40” x 32”. • Furnished with four threaded studs and bolts for mounting plate or mounting frame installation• Door bosses for front panel mounts.• Internal three-point closing system with one-point entry.• Mutiple locking systems available.• Self-adhesive rain-shield included as a standard accessory with each cabinet.• Easily modified with conventional tools such as a drill, milling equipment, saw or punch.

Polycarbonate Enclosures

Multibox Series

VM Miniature Series

Applications

• Ideal for automation and control applications in industry, machinery, tool-shop and OEM.

• Electronic applications in data and telecom industry.

• Also suitable for use as commercial and industrial distribution boxes.

Approvals: • UL Listed Types 4, 4x, 3, 3R, 12 & 13

• CSA 4, 4x, 3, 3R, 12 & 13

Rating(s): IP66

Approvals

• UL Listed Types: 2, 3, 3R, 3S, 5, 12 & 12K

• CSA Listed Types: 2, 3R, 5, 12 & 12

• Industry

• Public utilities

• Motor control centers

• Electronic instrumentation

• Low voltage distribution boards

VMS Series

Approvals

• UL Listed Types 4X & 12 (Polycarbonate)

• NEMA 4X & 12 (Polystyrene

Applications

• Automation and control applications in industry,

machinery, toolshop and OEM.

• Electronic applications in data and telecom industry.

• As commercial and industrial power distribution boxes.

Rating(s): IP66

• 10 sizes from 5 x 3” to 7x7”• Solid or clear covers• Seamless polyurethane gasket• Available with or without moulded knockouts.• Full range of pushbutton stations available• Can be customized with silk screening or moulded logo’s.

• Accessories – hinged window kits, DIN rail kit

• Modular dimensions in increments of 4”, from 12 x8” to 24 x 16”• Covers transparent, opaque or DT cover, common design and depth• No tool - removable side walls for easy wiring access.• No tool coupling methods speeds assembly• Adjustable back pan or DIN rail mount depths

• Accessories – Universal cable entry glands, DIN rail kits, depth extension collars

Applications

• 11 sizes from 2x2” to 14 x 10”• Indoor or outdoor use.• Available in Polycarbonate (PC) or Polystyrene (PS). • PC temp range is -35C – 120*C. PS temp range is -40C -70*C• Smooth sides or pre-moulded knockouts.• Solid or clear cover versions.

• Accessories – hinge kits, backpans, mount brackets, air vents, List ratings and approvals


Rating(s): IP65

25

VJ Series

Part O/D Dims I/D Dims

H X W X D inches (mm)

VJ606WVJ606HWVJ606HWPL1VJ606HWLL1VJ606NHWVJ606NHWPL1VJ606NHWLL1

7.31 x 7.31 x 4.92(186 x 186 x 125)

6 x 6 x 4.64(152 x 152 x 118)


9.31 x 7.31 x 4.92(236 x 186 x 125)

8 x 6 x 4.64(203 x 152 x 118)


11.31 x 9.31 x 5.43(287 x 236 x 138

10 x 8 x 5.15(254 x 203 x 131)


13.31 x 11.31 x 5.60(338 x 287 x 142)

12 x 10 x 5.27(305 x 254 x 134)


15.31 x 13.31 x 6.60(389 x 338 x 168)

14 x 12 x 6.27(356 x 305 x 159)


17.31 x 15.31 x 6.67(440 x 389 x 169)

16 x 14 x 6.41(406 x 356 x 163)


19.31 x 17.31 x 9.58(490 x 440 x 243)

18 x 16 x 9.33(457 x 406 x 237)

ARIA Series

Part O/D Dims I/D Dims


AN1208AN1208FPHAAN1208HKLAAN1208HNAAN1208HPLAAN1208PLAN1208PLFPHA

12.40 x 8.46 x 6.69(315 x 215 x 170)

10.82 x 6.69 x 6.38(275 x 170 x 162)


16.34 x 12.40 x 6.69(415 x 315 x 170)

14.83 x 10.63 x 6.38(375 x 270 x 162)


20.28 x 16.34 x 9.06(515 x 415 x 230)

18.75 x 14.58 x 8.82(475 x 370 x 224)


24.21 x 16.34 x 9.06(615 x 415 x 230)

22.70 x 14.51 x 8.82(575 x 370 x 224)


28.94 x 21.06 x 10.63(735 x 535 x 270)

26.57 x 18.50 x 10.39

(675 x 470 x 264)


32.87 x 25.00 x 11.81(835 x 635 x 300)

30.78 x 22.44 x 11.57

(775 x 570 x 294)


40.75 x 32.87 x 11.81(1035 x 835 x 300)

39.16 x 30.28 x 11.57

(975 x 770 x 294)

VM Series

Part O/D I/D Size


VM433 4.36 x 3.18 x 3.66(111 x 81 x 93)

4.01 x 2.82 x 3.31(102 x 72 x 84)

VM533 5.03 x 3.06 x 3.02(128 x 78 x 77)

4.69 x 2.72 x 2.72(119 x 69 x 69)

VM534 5.03 x 3.06 x 4.02(128 x 78 x 102)

4.69 x 2.72 x 3.72(119 x 69 x 69)

VM553 5.03 x 5.03 x 3.02(128 x 128 x 77)

4.69 x 4.69 x 2.72(119 x 119 x 69)

VM544 5.03 x 5.03 x 4.02(128 x 128 x 102)

4.69 x 4.69 x 3.72(119 x 119 x 94)

VM733 6.72 x 3.17 x 3.61(171 x 81 x 92)

6.37 x 2.82 x 3.33(162 x 72 x 85)

VM753 7.00 x 5.03 x 2.97(178 x 128 x 75)

6.65 x 4.69 x 2.72(169 x 119 x 69)

VM754 7.00 x 5.03 x 4.02(178 x 128 x 102)

6.65 x 4.69 x 3.72(169 x 119 x 94)

VM755 7.00 x 5.03 x 5.02(177 x 128 x 128)

6.65 x 4.69 x 4.72(169 x 119 x 120)

VM773 7.00 x 7.00 x 3.02(178 x 178 x 77)

6.65 x 6.65 x 2.72(169 x 169 x 69)

VM775 7.00 x 7.00 x 5.02(178 x 178 x 128)

6.65 x 6.65 x 4.72(169 x 169 x 120)

VM776 7.00 x 7.00 x 6.02(178 x 178 x 153)

6.65 x 6.65 x 5.72(169 x 169 x 145)

VM933 9.09 x 3.18 x 3.61(171 x 81 x 92)

8.74 x 2.84 x 3.33(222 x 72 x 85)

VMS Series

Part O/D I/D Size


VMS1208VMS1208CT

12.60 x 8.66 x 7.05(320 x 220 x 179)

11.06 x 7.12 x 6.11(281 x 181 x 155)

VMS1212VMS1212CTVMS1212DT

12.60 x 12.60 x 7.05(320 x 320 x 179)

11.06 x 11.06 x 6.11(281 x 281 x 155)

VMS1612VMS1612CTVMS1612DT

17.32 x 12.60 x 7.05(440 x 320 x 179)

15.78 x 11.06 x 6.11(401 x 281 x 155)

VMS2412VMS2412CT

25.2 x 12.60 x 7.05(640 x 320 x 179)

23.66 x 11.06 x 6.11(601 x 281 x 155)

VMS2416VMS2416CT

25.2 x 17.32 x 7.05(640 x 440 x 179)

23.66 x 15.78 x 6.11(601 x 401 x 155)

Enclosure Sizes - Opaque listed only


26

MutliBox Series

Part O/D I/D Size Part O/D I/D Size


MB252502PCMB252502PS

2.55 x 2.55 x 2.25(65 x 65 x 57)

2.32 x 2.32 x 1.77(59 x 59 x 45)


7.08 x 3.70 x 2.24(180 x 94 x 57)

6.85 x 3.46 x 1.77(174 x 88 x 45)


2.55 x 2.55 x 3.18(65 x 65 x 81)

2.32 x 2.32 x 2.72(59 x 59 x 69)


7.08 x 3.70 x 3.19(180 x 94 x 81)

6.85 x 3.46 x 2.72(174 x 88 x 69)


3.70 x 2.55 x 2.25(94 x 65 x 57)

2.32 x 2.32 x 1.77(88 x 59 x 45)


7.08 x 4.33 x 3.54(180 x 110 x 90)

6.81 x 4.06 x 2.95(173 x 103 x 75)


3.70 x 2.55 x 3.18(94 x 65 x 81)

3.46 x 2.32 x 2.72(88 x 59 x 69)


7.08 x 4.33 x 4.37(180 x 110 x 111)

6.81 x 4.06 x 3.82(173 x 103 x 97)


3.70 x 3.70 x 2.24(94 x 94 x 57)

3.46 x 3.46 x 1.77(88 x 88 x 45)


7.08 x 4.33 x 6.50(180 x 110 x 165)

6.81 x 4.06 x 5.91(173 x 103 x 150)


3.70 x 3.70 x 3.18(94 x 94 x 81)

3.46 x 3.46 x 2.72(88 x 88 x 69)


7.08 x 7.17 x 3.54(180 x 182 x 90)

6.85 x 6.93 x 2.95(174 x 176 x 75)


4.33 x 4.33 x 2.60(110 x 110 x 66)

4.09 x 4.09 x 2.13(104 x 104 x 54)


7.08 x 7.17 x 4.37(180 x 182 x 111)

6.85 x 6.93 x 3.82(174 x 176 x 97)


4.33 x 4.33 x 3.54(110 x 110 x 90

4.09 x 4.09 x 3.07(104 x 104 x 78)


7.08 x 7.17 x 6.46(180 x 182 x 164)

6.85 x 6.93 x 5.94(174 x 176 x 151)


5.11 x 3.70 x 2.24(130 x 94 x 57)

4.88 x 3.46 x 1.77(124 x 88 x 45)


10.00 x 7.09 x 3.54(254 x 180 x 90)

9.76 x 6.85 x 2.95(248 x 174 x 75)


5.11 x 3.70 x 3.19(130 x 94 x 81)

4.88 x 3.46 x 2.72(124 x 88 x 69)


10.00 x 7.09 x 4.37(254 x 180 x 111)

9.76 x 6.85 x 3.82(248 x 174 x 97)


5.11 x 5.11 x 2.95(130 x 130 x 75)

4.88 x 4.88 x 2.48(124 x 124 x 63)


10.00 x 7.09 x 6.50(254 x 180 x 165)

9.76 x 6.85 x 5.94(248 x 174 x 151)


5.11 x 5.11 x 3.90(130 x 130 x 99)

4.88 x 4.88 x 3.43(124 x 124 x 87)


14.21 x 10.00 x 4.37(361 x 254 x 111)

13.98 x 9.76 x 3.82(355 x 248 x 97)


14.21 x 10.00 x 6.46(361 x 254 x 164)

13.98 x 9.76 x 5.91(355 x 248 x 150)

APO Series

Part O/D I/D Size


A1-706A1-706HA1-706HPL1

7.32 x 5.94 x 5.50(186 x 151 x 140)

6.54 x 5.16 x 5.00(165 x 131 x 127)

A31-1207A31-1207HA31-1207HPL2

11.89 x 7.32 x 6.93(302 x 186 x 176)

11.10 x 6.54 x 6.43(282 x 166 x 163)

A41-1212A41-1212HA41-1212HPL2

11.89 x 11.89 x 6.93(302 x 302 x 176)

11.10 x 11.10 x 6.43(282 x 282 x 163)

A71-1412A71-1412HA71-1412HPL2

14.65 x 11.89 x 6.93(372 x 302 x 176)

13.86 x 11.10 x 6.43(352 x 282 x 163)

A51-1912A51-1912HA51-1912HPL2

19.20 x 11.89 x 6.93(488 x 302 x 176)

18.40 x 11.10 x 6.43(467 x 282 x 163)

A81-2212A81-2212HA81-2212HPL2

21.97 x 11.89 x 6.93(558 x 302 x 176)

21.14 x 11.10 x 6.43(537 x 282 x 163)

A61-2412A61-2412HA61-2412HPL2

23.74 x 11.89 x 6.93(603 x 302 x 176)

22.91 x 11.10 x 6.43(582 x 282 x 163

A11-2414A11-2414HA11-2414HPL2

23.74 x 14.65 x 6.93(603 x 372 x 176)

22.91 x 13.86 x 6.43(582 x 352 x 163)

A12-2424A12-2424HA12-2424HPL4

23.74 x 23.74 x 6.93(603 x 603 x 176)

22.91 x 22.91 x 6.43(582 x 582 x 163)

Poly Safe Series

Part O/D I/D Size


PS2020APS2020ADFR

19.69 x 19.69 x 12.60(500 x 500 x 320)

19.44 x 19.44 x 12.35(494 x 494 x 314)

PS2030APS2030ADFR

19.69 x 29.53 x 12.60(500 x 750 x 320)

19.44 x 29.28 x 12.35(494 x 744 x 314)

PS3020APS3020ADFR

29.53 x 19.69 x 12.60(750 x 500 x 320)

29.28 x 19.44 x 12.35(744 x 494 x 314)

PS3030APS3030ADFR

29.53 x 29.53 x 12.60(750 x 750 x 320)

29.28 x 29.28 x 12.35(744 x 744 x 314)

PS3040APS3040ADFR

29.53 x 39.37 x 12.60(750 x 1000 x 320)

29.28 x 39.12 x 12.35(744 x 994 x 314)

PS3050/2APS3050/2ADFR

29.53 x 49.21 x 12.60(750 x 1250 x 320)

29.28 x 48.96 x 12.35(744 x 1244 x 314)

PS4020APS4020ADFR

39.37 x 19.69 x 12.60(1000 x 500 x 320)

39.12 x 19.44 x 12.35(994 x 494 x 314)

PS4030APS4030ADFR

39.37 x 29.53 x 12.60(1000 x 750 x 320)

39.12 x 29.28 x 12.35(994 x 744 x 314)

PS4040APS4040/2APS4040ADFRPS4040/2ADFR

39.37 x 39.37 x 12.60(1000 x 1000 x 320)

39.12 x 39.12 x 12.35(994 x 994 x 314)

PS4050/2APS4050/2ADFR

39.37 x 49.21 x 12.60(1000 x 1250 x 320)

39.12 x 48.96 x 12.35(994 x 1244 x 314)

PS5030APS5030ADFR

49.21 x 29.53 x 12.60(1250 x 750 x 320)

48.96 x 29.28 x 12.35(1244 x 744 x 314)

PS5040/2APS5040/2LAPS5040/2ADFRPS5040/2LADFR

49.21 x 39.37 x 12.60(1250 x 1000 x 320

48.96 x 39.12 x 12.35(1244 x 994 x 314)

Enclosure Sizes - Opaque listed only

For complete dimensions on all the enclosure Series please visit www.fusetek.comAnd download the Vynckier catalogue

Basic I.P. Rating

First digit - Solid Particle Protection: 0 = No protection, 1 = back of hand, 2 = finger safe, 3 = Tool, 4 = wire, 5 = dust protected & wire, 6= Dust Tight

Second Digit - Liquid ingress Protection: 0=None, 1 = Dripping water, dripping water when tilted at 15 degress, 3 = spraying water, 4 = splashing of water, 5=water jets, 6= powerful water jets, 7= immersion to 1 meter, 8=immersion beyond 1 meter, 9k=Powerful high temperature water jets.

27

599 Norris CourtKingston, OntarioCanada, K7P2R9

T: (800) 479-3875F: (800) 866-7690

E: [email protected]: www.fusetek.com

Pub.#PSG-01V2 Printed in Canada

Documents

Protect Organize Control - fusetek.com · KLSR replaces competitor’s: KTSR, A6KR The Littelfuse FLNR_ID and FLSR_ID Indicator fuses provide visual indication ... The unique design