PRODUct Range 2011 - Neu-Trek Fahr Kataloguste/308.8350.3.4-6... · range of DEUTZ-Fahr tractors. 1965 D-05. Four-wheel drive was offered for the first time for the D 6005 ... DEUTZ

EVOLVING AGRICULTURE.

PRODUct Range 2011

2

cOntenthistORy �� 4-5

technOlOgy �� 6-7

tRactORs �� 8-31

cOmbine haRvesteRs �� 32-39

sPecialist eqUiPment �� 40-47

fORage haRvesting �� 48-51

afteRsales & seRvice �� 52-55

sDf gROUP �� 56-57

technical Data �� 58-67

3

DeUtZ-fahRDeUtZ-fahR� at yOUR siDe fOR OveR 80 yeaRs�

1959

milestOnes in tRactOR PRODUctiOn1927 Serial production of DEUTZ tractors starts.

1933 F2M 315. First DEUTZ tractor with 5-gear transmission, PTO drive and block design (28 hp).

1936 F1M 414. The breakthrough for the motorization of small-scale ag-ricultural operations came with the DEUTZ 11 series, the typical “farmer‘s tractor” F1M 414.

late 50s D series. The launch of the D25 saw the new FL712 generation of engines, with power ranging from 13 to 52 hp, also Introduced to the range of DEUTZ-Fahr tractors.

1965 D-05. Four-wheel drive was offered for the first time for the D 6005 to D 9005 in the four- to six-cylinder class.

1968 D-06. First deliveries of the D-06 series.

1972 InTrac. The unusual tractor concept with three mounting areas, front cab, sliding doors, front powerlift and front PTO attracted tremend-ous interest.

1978 DX. With the DX series, DEUTZ-Fahr brought out a generation of tractors with a completely new design concept, featuring new en-gines, a fully-synchronized transmission with closed-circuit pressure lubrication and four-wheel drive as standard. Five-cylinder diesel engi-nes were also used for the first time.

1991 agroXtra. With the agroXtra, DEUTZ-Fahr was the first manufac-turer to offer the first genuine open-view tractor.

2000 agrotron MK3. With its still revolutionary spacious cab concept DEUTZ-Fahr offers a series of tractors which set the standard in terms of hydraulic power, cab design and user-friendliness with power ranging from 80 to 260 hp.

2001 agrotron TTV. The new aGrOTrON TTV, launched in 2001, repre-sented a new generation of tractors from DEUTZ-Fahr with infinitely variable gearbox and a completely new control concept.

When a brand has been acclaimed by farmers and contractors for over 80 years, then it must be something special. Even at the very start of mass production of diesel tractors in 1927, DEUTZ-Fahr was one of the first manufacturers in the world to recognize that mechanization of agriculture was the only way to increase farmers’ productivity and could therefore make a major contribution to raising the general standard of living in society. all technical developments have always been geared towards the requirements of farmers. With simple and rugged machines DEUTZ-Fahr delivered precisely the technology to make the work in the field both easier and more com-fortable. It was the invention of the “farmer’s tractor”, for instance – the DEUTZ 11 series – that helped the mechanization of agricul-ture really finally really take off in 1936. and this has been followed ever since by a constant flow of new trend-setting concepts such as the introduction of air-cooled engines (1950), the first controlled hydraulics (1958), the Intrac concept (1972), the free vision concept (1990), the spacious panoramic cab (1995) and front axle suspen-sion (1996). In this connection the principle has always been that “if it helps the farmer, then it is good”. The fact that well over 320,000 tractors are currently still in use provides impressive testimony of DEUTZ-Fahr’s reliability and closeness to its customers.

and that is how DEUTZ-Fahr products continue to be today. Mo-dern, easy to operate technology, outstanding value for money, and service beyond comparison.

DeUtZ-fahRDeUtZ-fahR� at yOUR siDe fOR OveR 80 yeaRs�

19951935

1936

1972

5

DR

I V E D E U

TZ

SAVE DIESEL

MONTHS

WARRANTY

Thanks to their innovative engine technology and their PTOs, DEUTZ-FAHR tractors save up to 15 % on diesel fuel.

Exclusively at DEUTZ-FAHR: 24 months guarantee for all Agrotron from 132 hp.

6

DeUtZ-fahRintelligent technOlOgy�

AGRex

PTO

2,1001,200 1,400 1,600 1,800 2,000

RATED POWER

n (rpm)

M (Nm)P (hp)

DPC

DPC power dependingon load

One transmission, two optional top speeds:40 or 50 kph.

External exhaust gas recirculation considerablyreduces emissions.

With 4 PTO speeds as standard:540 / 540 E / 1,000 / 1,000 E

DEUTZ Common-Rail. The technology for minimal fuel consumption and the quickest possible response characteristics.

Stop & Go enables the driver to maneuver easily andcomfortably because it eliminates exhausting coupling work.

Approval for 100 % bio-diesel: Saves costs and protects the environment.

The innovative DPC technology delivers the highest and most economically efficient power at all times in dependency on the load situation. Strong torque, quick response characteristics and sufficient traction are therefore guaranteed even under the most difficult operating conditions.

Surveys regularly show that what farmers and contractors want are reliable and economical machines. high-tech normally comes lower down the list of priorities. Which is why DEUTZ-Fahr concentrates on the essentials such as economical engines, perfectly coordinated transmissions, powerful hydraulics and comfortable cabs.

Leading engine technologyDEUTZ-Fahr’s engine strategy is clear and unambiguous – they have to be economical and reliable. DEUTZ-Fahr is one of the few manu facturers to still manufacture its own engines and, thanks to its holding in leading engine manufacturer DEUTZ aG, it also has

access to modern and economical engine technology. Milestones such as electronic engine control, high-pressure injection and the Common-rail system were largely DEUTZ developments. In sum-mary, maximum power and torque for minimum fuel consumption.

The right transmission technology for every applicationThe customer has the choice. DEUTZ-Fahr has the right transmis-sion for every tractor and application, be it synchro transmission, Eco-Speed transmission, Powershift transmission with 3 and 4 Po-wershift stages, Powershift transmission with aPS (automatic Po-wershift) or infinitely variable TTV transmission. DEUTZ-Fahr is one

7

DeUtZ-fahRintelligent technOlOgy�

Stop & Go enables the driver to maneuver easily andcomfortably because it eliminates exhausting coupling work.

PowerComS control concept with 4 electrical remote valves for ProfiLine.

Up to 100 % mechanical power transmission:The high level of efficiency of the TTV transmission cannot fail to impress.

Thanks to the economy PTO the Agrotron operates at speed of 1,600 rpm which is the optimum for consumption. The speed is reduced by 20 % and fuel consumption by 12 %.

Consumption g/kWh

1,400 1,600Speed n [rpm]

1,800 2,000

1,000 E - 20 %

1,000

Optimum fuel combustion thanks to four valves and 7-hole injection nozzles.

of just a few manufacturers to offer transmissions with electroni-cally programmable top speeds (depending on the model). and fuel consumption was also taken into account here as well, with the top speed for most models being achieved with a reduced engine speed.

Savings four times overFrom as low as the 90 hp models, DEUTZ-Fahr tractors come with four PTO speeds. This is because on top of the 540 / 1,000, the agro-tron models are equipped with the 540 E and 1,000 E economy PTOs as standard. Their low engine speeds reduce fuel consumption, engine load and noise disturbance for both driver and environment. Thanks to a

well-coordinated transmission the working range of the PTO is within the most favourable consumption range and – as a result of the engine cha-racteristics – offers extremely high power and torque levels at the same time. This means a lot of power even for the economy PTO as well.

Maximum hydraulic capacityIt is reassuring to know that all DEUTZ-Fahr tractors come with high-performance hydraulic systems. Because farmers always want to be able to use implements which match the performance of their tractor. The lifting forces, too, are up with the best and therefore ensure that the optimum working width is always utilized.

Working range 1

Working range 2

Working range 3Working range 4

Multi-plate clutches

tRactORsSpecialist tractors, narrow-track and compact tractors in addition to large tractors. The DEUTZ-FAHR tractor program comprises more than 40 models ranging from 40 to 275 hp, which can be used productively, reliably, conveniently and above all economically in all agricultural businesses.

8

9

Two additional electrical remote valves are controlled by theblue buttons in the PowerComS control lever.

AGRex

MONTHS

WARRANTY

agROtROn X710 • 720

Great classThanks to optimum weight distribution and 50 km / h maximum speed, the agrotron X is equally suitable for heavy field work and transport tasks. This means that it is equally suited to combined working with front and rear implements and to high speed road transport tasks.

The features:

DEUTZ Common-Rail 24 valve engines, Tier III, 6 cylinder, 7146 cm3 with turbo, intercooler, electronic engine manage-ment and external exhaust-gas recirculation system

100 % compatible with biodiesel fuel (B100)

6-speed transmission with automatic Powershift (4 Power-shift gears with electrohydraulic pushbutton control): 40 FWD + 40 REV, max. speed 50 km/h, at economy engine speed, limited to 40 km/h with super-economy engine speed (to meet legal requirements)

Hydraulic system with variable displacement pump with Load-sensing

Electronically controlled radar-equipped rear lift

Maximum comfort guaranteed by automatically controlled hydraulic suspension on front axle and cab

Integrated multifunction monitor for control of main functions

10

The innovative DPC technology delivers the highest and most economically efficient power at all times in dependency on the load situation. Strong torque, quick response characteristics and sufficient traction are therefore guaranteed even under the most difficult operating conditions.

2,1001,200 1,400 1,600 1,800 2,000

RATED POWER

n (rpm)

M (Nm)P (hp)

DPC

DPC power dependingon load

DEUTZ-FAHR Power Control (DPC)

11

agROtROn l710 • 720

MONTHS

WARRANTY

Powerful ploughinga tractor at the top of its class: a powerful and high-torque DEUTZ engine along with a convenient power-shift gear train with aPS make the agrotron L 710 and L 720 an ideal tractor for large enterprises and contractors.

The features:

DEUTZ Common-Rail Tier III engines, 6 cylinders, 7146 cm3, turbo intercooler, with electronic engine management


33-speed transmission (12-speed Powershift), automatic Powershift and electro-hydraulic control

3 ranges: working range (from 2 to 19 km / h), transport range (up to 50 km/h at economy engine speed, limited to 40 km / h in super-economy engine speed (to meet legal requirements)

Hydraulic Powershuttle with twin oil-immersed multiplate clutches

Electric parking brake: mechanical-electronic system ensuring safe parking in all conditions

Load-sensing hydraulic system with variable displacement pump, and 7 remote valves

DRP geometry for maximum traction in the toughest conditions

Front axle with hydraulic suspension and sprung cab with automatically controlled pneumatic suspension

Optimum fuel combustion thanks to the DCR technology and 7-hole injection nozzles.

Economical for transportation work as well.

The PowerComS control lever to control the tractor functions.

12

agROtROn ttv610 • 620

Everything under control with the PowerComV driving lever.

PTO shaft speed selection lever.

Everything in sight at all times: The transmission monitor.

Stepless comfort and simple operationThis powerful, high torque, economical and reliable tractor is equipped with an infinitely variable hydrostatic-mechanical gear train with three driving strategies. Driving and working in a similar way to a car with an automatic gearbox without any tedious trai-ning. It couldn’t be more simple.

The features:

DEUTZ Common-Rail Tier III engine, 6 cylinders, 24 valves, turbo intercooler, with electronic engine management and external exhaust gas recirculation system


DPC: DEUTZ Power Control, intelligent power management in all applications

Hydraulic Powershuttle with twin multiplate oil-immersed clutch

Continuously variable transmission, infinitely variable speed from 0 to 50 km/h with Powershift range gearbox

Max. speed 50 km/h at economy engine speed, limited to 40 km/h in super-economy engine speed (to meet legal requirements)



5050

AGRex

MONTHS

WARRANTY

PTO

13

agROtROn ttv630

Infinitely adjustable power and economy tooThis powerful, high-torque, economical and reliable tractor in the 200 hp range is fitted with an infinite hydrostatic-mechanical transmission with three drive strategies. Drive and work just like in a car with an automatic transmission without long-winded training. It couldn’t be easier.

The features:

DEUTZ Common-Rail Tier III engine, 6 cylinders, 24 valves, turbo intercooler, with electronic engine management and external exhaust gas recirculation system


DPC: DEUTZ Power Control, intelligent power management in all applications

Hydraulic Powershuttle with twin multiplate oil-immersed clutch

Continuously variable transmission, infinitely variable speed from 0 to 50 km/h with Powershift range gearbox

Max. speed 50 km/h at economy engine speed, limited to 40 km/h in super-economy engine speed (to meet legal requirements)



5050

AGRex

MONTHS

WARRANTY

PTO

The main indicator summarizes all important settings and indications.

The new iMonitor operation terminal is managed very easily and offers also a rear view camera, a hands-free telephone kit and an MP3 player connection.

14

A real workhorsea tractor at the centre of an agricultural operation must not only powerful and reliable, it also must be able to manage wide-ranging and frequently changing jobs such as combined operations involving both front and rear mounted implements. The powerful drivetrain and efficient, easily controllable hydraulic system on the agrotron ensure that it is super-economical to use.

The features:

State-of-the-art DEUTZ Common-Rail (DCR) engines with high constant torque and power range

EMC electronic engine control

4-stage Powershift transmission with 24 / 24 or 40 / 40 speeds

Clutch-free FWD / REV shifting

4-speed PTOs 540 / 540 E and 1,000 / 1,000 E rpm

Load-sensing hydraulics with high capacity pump available

Spacious cab with air conditioning and excellent view of all cultivation areas

Front axle and cab suspension providing even more comfort

Even the standard version includes the operator armrest withall functions in easy reach.

MONTHS

WARRANTY

PTO

AGROT RON M 410 • 420 • 600 • 610 • 6 15 • 620 • 625 • 640 • 650

15

The technology fits around the driver – not vice versa. The ProfiLine version offers a control concept based on the fre-quency of use of the functions, thus taking the strain off the driver. Comfortip is a function management system which is unique in how easy its functions are to use.

The features:

State-of-the-art DEUTZ Common-Rail (DCR) engines with high 2 and 4 valve technology and constant torque and power range and EMC electronic engine control

Reduction in emissions thanks to the externally cooled exhaust gas system (AGRex) for the 4-valve models

4-stage Powershift transmission with 40 / 40 speeds

All important functions incorporated into the PowerComS operating lever

Comfortip: simple programming and activation of operating sequences

4-speed PTOs 540 / 540 E und 1,000 / 1,000 E rpm

Electronic remote valves with time and flow rate adjustment

Load-sensing hydraulics with high pump rating

Spacious cab with air conditioning and excellent view

The PowerComS control lever to control the tractor functions.

Pneumatic cab springing for even more working comfort.

Consumption g/kWh

1,400 1,600Speed n [rpm]

1,800 2,000

1,000 E - 20 %

1,000

The Agrotron M operates in the optimum rpm range for use.

The driver can individually adjust APS response.

AGRex

MONTHS

WARRANTY

PTO

AGROT RON M 410 • 420 • 600 • 610 • 6 15 • 620 • 625 • 640 • 650

agROtROn K 410 • 420 • 430 • 610

16

A giant in dwarf’s clothingarable and grass farms make high demands on a modern tractor – essential attributes are: versatility, flexibility, manoeuvrability, size and last but not least specification with optional equipment to meet special requirements. at the same time comfort and maximum ergonomics should not be ignored. The agrotron K meets these demands with its unique design that provides an excellent view of all mounted implements and features a complete range of stan-dard equipment.

The features:

The latest DEUTZ engine technology (with DCR and DPC on some models) with high constant torque and power range

Versatile tractors for farmyard, grassland, and field cultivations

High productivity with Powershift transmission

Powershuttle for clutch-free direction changes

Powerlift control with modern Agrotronic hD for all application requirements

High lifting force of 6,220 kg rear and 2,500 kg front

Excellent view of front-mounted implements with slim, sloping motor cowling

4 PTO speeds: 540 / 540 E and 1,000 / 1,000 E as standard

Economical transport work thanks to the energy-saving DEUTZ engines.

The Agrotron K also offers a convincing performance in combination use.

PTO

agROtROn K420 • 430 • 610

17

Professionals use the ProfiLine modelsall the functions of the agrotron K are integrated within easy reach in the PowerComS armrest. Both engine and transmission control and also flow and time settings for the four standard electrical remote valves are integrated into the folding armrest.

The features:

The latest DEUTZ engine technology (with DCR and DPC on some models) with high constant torque and power range and Electronic Motor Control EMC

3-stage Powershift transmission with 24 / 8 or 36 / 12 speeds and APS

All important tractor functions incorporated into with the PowerComS operating lever

Comfortip: simple programming and activation of operating sequences

4-speed PTOs 540 / 540 E and 1,000 / 1,000 E rpm

Electronic remote valves with time and flow rate adjustment

Load-sensing hydraulics with high pump rating

Spacious cab with air conditioning and excellent view of all cultivation areas

With optional automatic air-conditioning

Mechanical or pneumatic cabin suspensionSimple change of the power shift stages with the PowerComS control lever.

Four remote valves as standard equipment on the ProfiLine version.

The opening clear-view roof is ideal – not only for front-loading work.

PTO

With the ProfiLine package the Agrotron K becomes a real high-tech tractor.

18

agROtRac610 • 620

Agrotrac – the perfect tractor for transports and field workThe DEUTZ-Fahr agrotrac range is designed and built to tackle a wide spread of farm work. Because they are so productive and versatile, agrotrac tractors are perfectly at ease with deman-ding open field work, even carrying implement combinations. They also excel in fast transport. a good power-to-weight ratio, correct weight distribution, and advanced technical specifications guaran-tee maximum efficiency under all conditions, while intelligent ergo-nomics and an intuitive control layout make them easy to operate from the moment you climb aboard.

The features:

SDF series 1000 Tier III engines, 6 cylinders turbo intercooler

Electronical control fuel system

24 FWD + 12 REV synchronised gearbox

Driving position suspended on silent block

High efficiency transmission

240 litres fuel tank capacity

7,000 kg max. lifting capacity with 68 l/min pump delivery

Electronic engine control ensures optimal injection efficiency, stable performanceduring all operating conditions.

The cab roof incorporates a large glass hatch so that front loading can beperformed with full visibility.

The new DEUTZ-FAHR TTV-transmission for compact tractors.

The armrest allows to control all the main functions of the Agrofarm TTV.

agROfaRm ttv420 • 430

19

Working automaticallyIt doesn’t get any easier: Start, drive off and work. In automatic mode, the agrofarm TTV offers great comfort for all types of work without tedious programming. all tasks are competently and easily mastered. The selection of the desired speed is achieved using the accelerator pedal. The control of the engine speed is taken over by the engine electronics, which maintain the correct speed ready to suit the respective load conditions.

The features:

DEUTZ Tier III engines, 4 cylinder turbo intercooler 4038 cc


Continuosly variable transmission with Auto Manual PTO

Hydraulic Powershuttle with control lever steering column and modulation response control

Up to 4 double acting electrohydraulically operated spool valves

Fully independent PTO with 4 speeds (540 / 540 E / 1,000 / 1,000 E)

True 4 wheel braking on all four wheels with park brake

Electronic rear lift with multifunctional armrest

Modern one piece hood design

Ergonomic cab with 4 pillars for high visibility

20

agROfaRm 420 • 430

The universal tractor classThe agrofarm Profiline series has been specially designed for grassland, field maintenance and farmyard use and offers particu-lar advantages in the compact medium class: great flexibility, a low center of gravity and high maneuverability, clear sight lines, easy handling as well as maximum economic efficiency and productivity, offering great value for money.

The features:

DEUTZ Tier III 2012 series engines, 4 cylinder turbo or turbo intercooler, 4038 cm³


Modern one-piece hood design; new 4-post ergonomic cab with outstanding all round visibility

5 synchronised speed gears, with 3 stage Powershift 60 FWD + 60 REV

“Power efficiency“ transmission

Maximum speed 40 km/h also with Overspeed (2000 RPM)

Hydraulic Powershuttle with control lever on steering column and modulation response control

Up to 4 double acting electrohydraulically operated spool valves with 60 or 90 l/min pump and “Energy Saving” system

Fully independent P.T.O. with four speeds (540 / 540 E / 1,000 / 1,000 E); ground speed PTO available

The modern 4-post cab offers not just a better overview but comfortable entry as well.

21

agROfaRm 410 • 420 • 430

Neatly arranged control levers in the right console.

Hydraulic Powershuttle available on request.

Economical compact classExceptional working economy from powerful, mid-range tractors. The new agrofarm is a universal tractor specified with functional, modern equipment. With economical DEUTZ engines and compact dimensions giving great flexibility and manoeuvrability. Clear con-trol layout and manageability in addition to maximum productivity are further important features. The ideal tractor for pasture, cul-tivation and yard applications.

The features:

DEUTZ Tier III 2012 series engines, 4 cylinder turbo or turbo intercooler, 4038 cm³


Modern one-piece hood design; new 4-post ergonomic cab with outstanding all round visibility

5 synchronised speed gears, 4 ranges (40 FWD + 40 REV), with creep and Hi-Lo

Maximum speed 40 km/h also with Overspeed

Hydraulic Powershuttle with control lever on steering column and modulation response control

Fully independent P.T.O. with four speeds (540 / 540 E / 1,000 / 1,000 E) Ground speed PTO available

True 4-wheel braking on all four wheels with optional park brake

agROfaRm t • tb410 • 420

All the controls are ergonomically arranged and readily identifiable by shape and colour, making them easy and intuitive to operate.

22

Robust platform tractorsThe agrofarm T is well suited to arable applications, as well as providing a tireless workmate for small businesses embarking on mechanization, but will also prove to be a versatile and useful re-source for larger agricultural concerns.Low profile, practical, efficient and well structured, agrofarm TB models have the perfect build for greenhouses, olive and citrus groves, and for mixed crops with irregular planting patterns. These models offer the ideal solution in situations where the height of the machine must necessarily be kept to a minimum, so as to overcome problems of space and optimize the work in hand.

The features:

DEUTZ Tier III 2012 series engines, 4 cylinder turbo or turbointercooler, 4,038 cm3 (4,000 cm3 Ecoline)


5-speed transmission with Hi-Lo 40 + 40 with hydraulic Powershuttle

Hydraulic P.T.O. with four speeds (540 / 540 E / 1,000 E), and independent live power take-off

Hydrostatic braking on all four wheels

Driving position designed for maximum comfort

Agrofarm T is also available in “Ecoline version“

Also available in TB version.

agROPlUs315 • 320 • 410 • 420

Compact tractor with high-tech equipmenta universal tractor series, practically equipped with economical and reliable SaME DEUTZ-Fahr engines. With a wide range of cab options and low overall heights it is possible to gain access to even the lowest of buildings. Yet the technical equipment beats all competitors: the Eco-Speed gear train and the Stop & Go clutch control are available nowhere else! a tractor series with all the outstanding features of the compact class combined with the comfort of middle-of-the-range tractors.

The features:

SDF series 1000 Tier III engines, 3 and 4 cylinders, turbo or turbo intercooler, with electronic engine management


Possibility to adjust engine speeds and save them to memory at the press of a button

Powershift 45 FWD + 45 REV gearbox with Overspeed

Hydraulic Powershuttle with control lever under the steering wheel, modulation response control and Stop&Go system

Double drive, PTO, and differentials with electrohydraulical command

Modern one-piece hood design


Clearly arranged and easy to read: The Agroplus dash.

Optional electronic hitch regulation (EHR).

23

Compact tractors for those who can calculateThe agroplus Ecoline are equipped with SDF 1000 series engines re-sponding to EUrO III a standards. Classic models are specified with 3 and 4 cylinder power units rated 62-85 hp, in turbo and turbo/in-tercooled versions. all have electronic engine management and a 75-litre capacity fuel tank, and all are 100 % compatible with biodiesel.

The features:

SDF series 1000 Tier III engines, 3 and 4 cylinders, turbo or turbo intercooler, with electronic engine management



30 + 15 synchronised gearbox

Double drive, PTO, and differential lock with mechanical engagements

Modern one-piece hood design


Fully independent P.T.O. with 3 speeds (540 / 540 E / 1,000)

Ground speed PTO available

24

agROPlUs 310 • 315 • 320 • 410

Agroplus Ecoline models have an entirely mechanical transmission and mechanically operated dry disc clutch (dual disc), with a 5-speed synchromesh gearbox.

The PTO is engaged mechanically by operating the lever with the yellow knob located to the left of the driver seat.

Stop & Go is activated with the press of a button.

The effective heating and ventilation system quickly provides a pleasant working climate.25

agROPlUs f 320 • 410 • 420 • 430

Powerful, compact tractorThe compact agroplus F is ideal for orchards, meadows and local authority use. With electronically controlled engines and a prac-tical gearbox to suit all applications, it offers a genuine high tech range of equipment.

The features:

SDF series 1000 Tier III engines, 3 or 4 cylinders, turbo or turbo intercooler, with electronic engine management


5 speed Powershift gearbox with 3 Powershift ratios

Overspeed gearbox for a top speed of 40 km/h even at economy engine speed

Hydraulic Powershuttle with control lever on steering column and Stop&Go

Double drive, PTO, and differentials with electrohydraulical command

Hydraulic system with maximum capacity of 58 l/min.: 10-way remote control valves

Hydraulic P.T.O. with three speeds (540 / 540 E / 1,000)


55° steering angle

One for manyWith a total of six models and two different wheelbases, the agro-plus F Ecoline is the ideal tractor for many enterprises and applica-tions. Whether for agriculture, garden and cultivation landscaping enterprises, community or private use: efficiency, manoeuvrability and economic consumption are common to all models.

The features:




Synchro gearbox, 30 FWD + 15 REV gears

Maximum speed 40 km/h

All-wheel braking with oil-bath discs and hydrostatic control

Hydrostatic steering with independent hydraulic system

540 / 540 E / 1,000 and groundspeed PTO

26

agROPlUs f310 • 315 • 320 • 405 • 410 • 420

The driving position is spacious and comfortable, with shift levers located to the right of the seat so that the operator can safely mount and dismount unhindered.

Manoeuvrability is second to none, with the steering made easy to handle by a dedicated hydraulic system that renders the action consistently light and responsive under all conditions.

27

agROPlUs s 320 • 330 • 410 • 420 • 430

The orchard and vineyard specialistManoeuvrable and of slim-line design, it is the ideal narrow-track tractor for orchards and vineyards. The series features electronically controlled engines, a powerful hydraulic system, up to five remote valves and practical, task-oriented transmis-sions for all jobs.

The features:






Double-drive P.T.O. and electro-hydraulic differentials

Hydraulic system with maximum capacity of 58 l/min. and 10-way remote control valves



60° steering angle

Great overview with the instrument panel of the Agroplus S.

Powershuttle to order: Simple and convenient changing of direction.

28

When slim lines and power are what countsWith a minimum external width of just 111 cm – subject to the tyres used – the agroplus V fits in every type of crop row. With four mounting areas and up to five remote valves, it copes not only with every task in the vineyard and orchard but also quickly becomes an irreplaceable aid for municipal services in carrying out their city cleaning and grassland maintenance work.

The features:






Double-drive P.T.O. and electro-hydraulic differentials

Hydraulic system with maximum capacity of 58 l/min. and 10-way remote control valves



agROPlUs v 320 • 330 • 410 • 420 • 430

Air suspended or mechanically suspended comfort seat.

29

agROlUX 310 • 320 • 410

The compact tractor for the home, yard, garden and leisureFeaturing compact dimensions and powerful engines, the agrolux 310 / 320 / 410 is equipped with everything that a real tractor has to have. With a lifting force of 3.0 t and two PTO speeds, the agrolux copes even with demanding tasks in horticulture and landscaping.

The features:

Tier III 3 and 4 cylinders liquid cooled SDF engine, turbo or turbo intercooler

Tiltable hood

15 + 15 synchronised gearbox

Epicyclic reduction final drives

“Heavy duty” rear axle

Hydrostatic braking on all four wheels (4WD and 2WD)

Hydrostatic steering with independent pump

Rear P.T.O. with standard speeds of 540 / 540 E and groundspeed PTO

2WD version available

The driver’s cab is tidy and clearly arranged.

All operation levers for the hydraulic system are aranged ergonomically.

30

agROlUX 65 • 75

The universal tractor for every farmSimple, straightforward and highly intuitive. These are the main features typifying DEUTZ-Fahr tractors of the agrolux range, de-signed to give versatile and effi cient service either as all-purpose machines for small enterprises, or as auxiliaries alongside the high powered machines of fleets operated by larger organizations.

The features:

Tier III 3 cylinder turbo or trubo intercooler engines

12+3 synchronised gearbox

Rear P.T.O. with 2 speeds (540 / 540 E)

Compact and maneuvrable

Platform with security rollbar

Wiring harnesses and all other parts under the onepiece hood are organized and ratio-nalized in such a way that components will be better protected and last longer.

Excess clearance between calipers and brake discs is taken up by an innovative self-adjust system that brings several advantages.

agROKiD 210 • 220 • 230

As a platform tractor, too, the Agrokid is a genuine all-round talent.

Easy to handle and powerful to use: The Agrokid’s hydraulic unit.

The vehicle fleet for your private domainThe “smallest” DEUTZ-Fahr is the biggest for reliably mastering a variety of jobs such as market and landscape gardening together with a multitude of municipal services. Because of its compact dimensions and a turning radius of only 2.60 m it always gets to where it‘s needed.

The features:

Mitsubishi Tier III, 4 cylinders liquid cooled engines, naturally aspirated or turbo

Under-hood silencer with side exhaust

Synchronised gearbox: 16 FWD + 16 REV gears Synchroshuttle – Speed 30 km/h

Hydrostatic steering with independent hydraulic system

Independent hydraulic system with 30 l/min pump for dedicated hitch and 6-way auxiliary valves

Straddle front axle with large steering angle (57°) and and extensive oscillation angle

Electro-hydraulically operated front and rear diff-locks

Rear PTO (540, 540 E, 1000) ground speed PTO mid mounted PTO drive

Front linkage with lift capacity of 400 kg and independent 1,000 rpm PTO

31

32

33

cOmbinehaRvesteRsThe origins of DEUTZ-FAHR combine harvester production extend far back into the 1860’s. We manufacture combine harvesters with innovative spirit and competence. They are reliable, highly efficient and maintenance-friendly. Farmers and contractors rest assured, you can also rely on our experience in the future.

34

DeUtZ-fahR54 seRies

Compact and powerfulWith the 54 series DEUTZ-Fahr now supplies compact, reliable and powerful combine harvesters with four and five walkers. These robust and economical 54 series models are the first choice for medium-sized cash crop farms, machine pools and also contrac-tors serving the small agricultural businesses. Equipped as stan-dard with a generously sized, well-insulated, air-conditioned cab, the 54 series combine harvesters offer a high level of driving and operating comfort.

The features:

High-performance headers for all crops; widths from 3.10 to 5.10 m

Electrical header reversing unit as standard feature

Electrically adjustable threshing drum variator from 600 to 1,300 rpm

Large walkers with high chutes and a maximum walker area of 4.20 m²

Returns auger and after-threshing device on the preparation floor

Grain tank volume from 3,300 to 5,200 l

Easy access to engine and cooling system, simple servicing due to large maintenance flaps

Cutting units are available with cutting widths of between 3.10 m and4.80 m to cover all possible requirements.

In the right console terminal, all important control and operating elements are arranged clearly. Faults are signaled by large flashing alarm lamps.

35

DeUtZ-fahR6040

Excellent view on the header and working area.

Perfect access to the engine compartment.

Professional threshingharvesting that protects the grain and is productive for crops of all types is also no problem for the 6040. The powerful high capacity threshing unit and 5-straw walkers, provide a high flow rate. With cutting unit widths of up to 5.20 m and a powerful and economical DEUTZ engine with 222 hp (169 kW), it is the ideal combine harvester for farms and contractors who want a fast return of the investment.

The features:


„Optimum dresher“ technology

5 large straw walkers with 5 high air-blast chutes and an straw walker surface area of 5.28 m²

Grain tank volume of 6,500 l

DEUTZ 2012 engine with 222 hp and double PTO

Double grain return

36

DeUtZ-fahR60 seRies

Modern cab with a new operating console and three-positionadjustable steering column.

Harvesting with powerThe new five and six straw walker models in the 60 series continue the DEUTZ-Fahr tradition of powerful and reliable DEUTZ-Fahr combine harvesters. The new high-end combine harvesters offer impressive power and practical standard equipment. a choice of four models with engine outputs of 250, 310 and 366 hp (184, 228 and 269 kW) is available.

The features:


Central locking and multicoupling system for header as standard feature

Double cascade sieve system with cross flow fan

Double grain return

Sieve area with pull out preparation floor and large surface area of up to 6.70 m²

Grain tank volume of 7,500 l and 8,500 l

Double engine PTO

37Powerful and above all efficient: The TCD diesel engine from DEUTZ.

The clearly arranged operating console on the right-hand side is categorized into color-coded function groups.

DeUtZ-fahR7545 Rts

Gentle on the grain and highly productive:The new 75 series rotary combine harvesterhigh outputs per unit area, achieved productively and economic-ally. Those are the main requirements of farmers and contractors, which DEUTZ-Fahr now meets with the new 7545 rTS rotor combine harvesters.

State-of-the-art rotor technology for maximum outputThe core of the new rTS combine harvester is the new rotor tech-nology. The rotor has a diameter of 750 mm and a length of 3.15 m. For uniform feeding to the rotor the threshing system comes with a large upstream infeed drum. This guarantees high throughputs and gentle handling of all types of crop during threshing.

The features:

Overpower of 30 hp for discharging (480 hp (352 kW))

Compact dimensions thanks to rotary technology

Single Rotor threshing system and an infeed drum

Working widths headers up to 7.20 m

Spacious cab with clearly arranged touch screen control terminal

Four-wheel drive as standard

38

DeUtZ-fahR6060 hts climbeR

Loss-free threshing even in extreme situationsWith four-wheel drive and turbo separator as standard, the Climber delivers loss-free and reliable harvesting even in extreme situations. With the proportional levelling system it is possible to compensate for downhill slopes of up to 10 %, uphill slopes of up to 30 % and lateral inclinations of up to 40 %.

The features:

Heavy-duty cutting units for all types of crop, with cutting widths of 4.80 m, 5.40 m and 6.30 m

Central locking and multi-coupling for the cutting unit as standard

Turbo separator as standard

Four-wheel drive as standard

Proportional reel speed with automatic engagement

5 large straw walkers with 4 air-blast chutes and an straw walker surface area of 5.60 m2

Sifting box with pull out preparation floor and large cleaning surface area of 5.28 m2

Grain tank volume of 7,500 l

Convenient access to the engine and cooler; easier maintenance thanks to central lubrication blocks and large maintenance flaps

With four-wheel drive, reinforced brakes and a wider chassis as standard, the Climber maintains a secure hold even on slopes.

The levelling proportional functions and the automatic 4WD engagement are managed by one single module.

39

Inclines made levelIn hilly terrain the Balance technology ensures a threshing perfor-mance and quality equal to that achieved during harvesting on flat ground. Electronic sensors, acting as a „spirit level“ detect the current combine inclination and immediately pass on the correct control signals to the hydraulic system. The DEUTZ-Fahr Balance combine harvesters maintain their full performance – also with lateral inclinations of up to 20 % as well as uphill and downhill slopes of up to 6 %.

The features:

Optimum harvesting even under difficult conditions

Innovative slope compensation

With up to 20 % levelling across slopes and up to 6 % up and down

Actively controlled header with “AutoControl” feature

Optional automatic cutting angle adjustment for compensation in direction of travel

Optimum adaptation of the header to the terrain

Constant threshing and separating capacity

The 25 ton heavy duty axle.

The autocontrol system ensures perfect cutting in all slope conditions.

DeUtZ-fahRbalance

40

sPecialisteqUiPmentDEUTZ-FAHR offers, in addition to a compre-hensive range of tractors, a multitude of spe-cialised equipment that make work for farmers and contractors not only easier but also more productive.

41

DeUtZ-fahRfROntlOaDeR

42

Front loader for high standardsOptimum safety and productivity are only ensured when the front loader and the tractor form a stable constructional unit. DEUTZ-Fahr front loaders are characterised by a host of safety details and an extremely robust, practical basic construction.

The features:

Robust and rugged base frame of finegrained steel

Optional hydraulic or mechanical parallel control

Maximum lifting height of 4.64 m

The loader and mountings do not obstruct the tractor‘s maintenance points

“QuickFix” fast coupling system available on request for quick and easy front loader coupling and implement connections

High lifting force throughout the entire lifting range

Easy and precise operation by joystick or one-lever controls

“ComfortDrive” protects the driver and equipment against extreme vibration

Perfectly adapted to one another: The Agro-tron cab and the DEUTZ-FAHR front loader.

Drive with ComfortDrive: Vibrations arecushioned. Easy on the tractor, frontloader and the driver.

The extraordinary manoeuvrability is main- tained by the construction of the front loader.

43

agROvectOR29�6 • 29�6 lP • 35�7 • 40�8 • 40�9

The electronic alarm indicator provides a visual andacoustic alarm when an overload is reached.

Every function in sight: The central control and display terminalprovides information about all the operating statuses.

The master loaderWith the agrovector DEUTZ-Fahr offers a universally versatile telescopic loader for all applications with a wide range of attach-ments for many agricultural jobs. The powerful hydraulic system and the economical engines make the agrovector an irreplaceable aid for the widest range of assignments.

The features:

Compact, manoeuvrable telescopic loader with excellent all-round view and very spacious comfort cab

5 models, including one with a low cab (1,99 m)

Low centre of gravity due to the side-mounted engine and rear telescopic boom link

High lifting height of 5.8 and 9.0 m

Powershuttle as standard feature

Hydrostatic drive with two vehicle speeds or Powershift transmission

Electronic joystick operation

Hydraulic quick-action coupling for attachments available as option

Robust construction

The home page summarizes all important settings and indications.44

The innovative operating system Clearly arranged, easy to operate and understand: The new iMonitor from DEUTZ-Fahr not only makes it easier to operate the tractor, it also offers an impressive range of new functions. With an integrated Bluetooth hands-free kit, MP3 player, integra-ted radio and an automatic reversing camera options, it brings to tractors for the first time operating systems which are familiar and service-proven in cars.

The features:

Clearly arranged and easy-to-operate display monitor

Non-glare, easily readable graphics

Clear symbols and indicators for tractor functions

Operating system similar to a premium brand car

Practical operating and display menus

All key settings and indicators summarized in the main display

MP3 player and integrated stereo radio

Automatic reversing camera for extra overview and safety at the rear of the tractor

Easily updated software, with information download facility

The new iMonitor operation terminal is managed very easily and offers great clarity and functionality, a rear view camera, a hands-free telephone kit and an MP3 player connection.

DeUtZ-fahRimOnitOR

ASG offers the maximum savings with aprecision of ±2cm.

The comparative test in the profi 03/2006 proves: the Agrosky is the absoluteforerunner among all automatic steering systems.

User-friendly and clear touch screen.

±30 ±25 ±20 ±15 ±10 ±5 ±2

45

40

35

30

25

20

15

10

AEK

Direct costs

Surface costs

ASG

Cost

Precision [cm]

Cost cuttingdepending on the precision

Systems User-friendly Functions Practicability Points

Agrosky ++++ +++++ ++++ 13

Agco Auto-Guide

+++ + + 5

Claas Outback eDrive

++ ++ ++ 6

John Deere AutoTrac

++++ ++ ++ 8

45

High-precision use on every fieldIncrease income with the agrosky and reduce labour costs. The satellite-controlled track guide system makes it possible to avoid track overlaps and misses. The absolute forerunner on the market in terms of its precision and user-friendliness.

The features:

Prevention of track overlapping and omissions

Savings of up to 15 % for fertilisers, pesticides and seed

Less working hours and substantial fuel savings (up to 20 %) and therefore lowered costs for each job

Less strain on the driver, especially for night work and in bad weather

Maximum track accuracy and precision (+/- 2 cm) due to RTK signal

Absolute repeatability of driving tracks with ground signal

Simple use in hilly terrain due to topographical compensation

Agrosky is available with an accuracy of ± 30 cm with Egnos or ± 2 cm with RTK signal and with optical track guidance, steering aid or fully automatic steering control

DeUtZ-fahRagROsKy

46

One for all placesSpecial applications on steep slopes require special crawler tractors. With its hill climbing ability of over 60 %, the agroclimber copes with even the steepest vineyards and, thanks to its powerful hydraulics and PTO equipment, is a match for the toughest jobs.

The features:

Economical and powerful turbo diesel motors with mechanical control and high-pressure injection

PTO with oil-immersed multi-plate clutch for soft, modulated start-up

Synchronized reverse gear with up to 16 / 16 speeds

3-point linkage with a lifting capacity of 3,000 kg

Driver platform mounted on silent blocks

Even in the most difficult conditions, the Agroclimber’s traction is immense.

The Agroclimber’s slim chassis is particularly well suited for use in vineyards.

agROclimbeR

DeUtZ-fahRagROvitis

47

The leaf rake in conjunction with the blower removes up to 50% of the leaves immediately after the harvesting operation.

The engine and hydraulic drive are installed on the left-hand side of the machine so that they are readily accessible and easy to maintain.

Gentle, productive grape harvestingWith the agrovitis grape harvester, not only can harvesting be carried out at optimum temperatures, and thus at the best pos-sible time, but harvesting suddenly also becomes independent of harvest labour, and so, as well as being less costly and more flexi-ble than manual picking, it is faster too.

The features:

Side-mounted grape bin, means that you don’t have to manoeuvre the grape collection truck

Central driver’s cabin with a glass floor

Excellent view of unloading

Three-stage leaf separation for a clean harvest

Closed stainless steel conveyor duct prevents losses of grapes and juice

70 % of leaves removed before they can come into contact with grapes or juice

Fast cleaning and maintenance

Fewer wearing parts because there is only one conveyor

Length of tipping edge: 1.80 m, and maximum tipping height: 2.80 m

48

fORagehaRvesting Pure, high quality forage. Farmers attach par-ticular importance to this. Professional and powerful technology is available to the modern processing business with the DEUTZ-FAHR forage harvesting programme.

49

50

DeUtZ-fahRfORage haRvesting technOlOgy

DrumMasterPerfect adaptation to the ground contours, a smooth cut, conve-nient operation and reliability have made DEUTZ-Fahr drum mo-wers the most successful products on the market. as a genuine trusty workhorse with a convincing mowing quality and tremend-ous power they have become, in economic terms, a guarantee of a quality forage harvest.

DiscMasteralways an even number of counter-rotating mowing discs for a clear crop flow, a particularly flat cutter bar with spur drive in addition to the unique suspension for perfect adaptation to the ground: DiscMaster mower conditioners fulfil the highest demands for technology and performance. The processing quality remains first-class even with crop which is damp or lies on the ground. Three blades per mowing disk are unique in the market.

CondiMasterDEUTZ-Fahr offers a complete range of tedders with the Condi-Master. You can choose from eleven different types with working widths of between 4.60 m and 14.00 m with four to ten rotors.

SwatMasterThe SwatMaster high-performance rotary swathing machine is characterised by proven technology, gentle processing of the va-luable crop in addition to outstanding operating comfort. The pro-duct range extends from the compact single rotary swather to the large quadruple machine. aside from high output the unmistakable features of the SwatMaster series also include perfect adjustment to the ground, top raking quality and setting down in precisely formed swathes.

51

DeUtZ-fahRfORage haRvesting technOlOgy

FixMasterThe increasing trend towards round bale silage in addition to the increasing utilization resulted in a completely new construction of the silage baler at DEUTZ-Fahr: with an increased compression density, a higher bale volume, more throughput, more stability and even more convenience. all this means 1a feed quality with the lowest costs per bale.

VariMasterWhether silage, hay or straw – with the new generation of variable round balers DEUTZ-Fahr once again meets the challenge by provi-ding contractors, machinery rings and farmers with state of the art technology. The uniform bale density, a bale diameter according to requirements, maximum throughput and first-rate operating com-fort make the reliable DEUTZ-Fahr balers the tools of choice for professionals. Shown in the illustration is the baler / wrapper combi-nation which combines two operations in one. To save you time.

BigMaster Uncompromising technology meeting the demand from large far-mers and contractors: these big balers from DEUTZ-Fahr are the customer’s first choice for a made-to-measure square bale. This is because the precisely shaped bales allow economic transport and efficient storage. The new, bigger rotor delivers even higher outputs, while changing the blades is simply child’s play thanks to the blade cassettes which can be pulled out at the side of the machine.

Rotor Loader Wagons a complete range with high load capacities from DEUTZ-Fahr. The range covers load volumes of 22 to 44 m3 and meets the highest requirements in terms of power, cutting quality and performance. Being particularly good value for money it is a commercially attractive solution for all grassland farmers. New in the range: The rotoMaster rotor loader with a loading volume of 55 m3 and a payload of 20 t, to round off the range at the top end.

52

afteRsales anD seRviceCompetent all-round advice is essential. Pro-fessionally trained DEUTZ-FAHR dealers offer expert and competent service and ensure that your machines are always ready for operation. Day after day, and round the clock during the harvest too.

53

54

Original service parts are the commonsense solutionYou put your trust in original products when it came to tractors and machinery. This is why you should also only use original parts for those machines. Because only original parts meet the high DEUTZ-Fahr quality standards and readily guarantee the function, readiness for use and lasting value of your purchase.

A smoothly operating parts serviceDEUTZ-Fahr has always relied on a smoothly operating parts ser-vice and makes major investments for continuous improvement in order to fulfil the high demands of dealers, farmers and contrac-tors, since the same rules apply to the parts business as for trac-tor development: investments are constantly made in employees, data processing and logistical techniques which render excellent service even more efficient and rapid.

True-to-deadline supplies throughout the worldThe central parts warehouse in Lauingen supplies dealers throughout the world from its strategic and central location. The site allows the SDF parts service to deliver urgent orders from throughout the whole of Europe, starting from Portugal to Finland and Greece within 24 hours on every day of the year. The aim is simplicity itself: customers must know that their specialist dealer always has all maintenance parts and appropriate parts available.

For all other special needs the central spare parts warehouse in Lauingen, which keeps over 220,000 spare parts, dispatches deli-veries within three days, so that interruptions to work are reduced to a minimum. Owing to the excellent relationships with internatio-nal deliverers, SDF can therefore offer a wide and diverse product range with an excellent price-performance ratio.

Premium quality for accessories tooDEUTZ-Fahr dealers also maintain a wide range of accessories to meet all requirements. From supplies to cleaning chemicals, from working headlights and driver’s seats to nets, yarn and foil, as well as wearing parts and spare parts for other makes. all of the same high quality and at low prices. To save you time and unnecessary effort expended in trying to find the right parts.

DEUTZ-FAHR lubricantsWe recommend new genuine DEUTZ-Fahr lubricants. The out-standing quality of this product range, which is made exclusively for DEUTZ-Fahr, ensures that your tractor always receives ex-actly what it needs.

DeUtZ-fahRDeUtZ-fahR ORiginalPaRts – Definitely

55

DeUtZ-fahRCompetent finance partnersSaME DEUTZ-Fahr Finance offers professional finance schemes tailored to market prices for all customers on purchase of trac-tors, combine harvesters or other products of the SaME DEUTZ-Fahr group. The financial services’ range of offers comprises conventional financing facilities such as credit or leasing. rental solutions can be drawn up individually. The comprehensive offer is supplemented by insurance. Competent employees are aware of the products and markets and devise individual financing offers in conjunction with the dealer which facilitate decisions on invest-ment and above all adapt the latter to you, the customer.

SaME DEUTZ-Fahr Finance works with a competent team of on-the road and office employees, who competently offer customer care to all DEUTZ-Fahr dealers and their customers, whether farmers or contractors.

Professional customer care and consultancyCustomers are visited by specialists, in order to deal on-site with financing and complete all the necessary formalities. rapid, com-petent and uncomplicated.

The member of the field service staff organizes all the steps invol-ved, through to successful loan approval. The efficient customer services also assists the customer in all matters relating to ex-change of property, change of loan/lessor, plan modifications and other matters concerning the current contract.

Our capable consultant team is always there for you.

yOUR finance PaRtneR

Founded by engineer Francesco Cassani in 1927 in Treviglio, the SaME DEUTZ-Fahr group is one of the world’s leading manufac-turers of tractors, combine harvesters, engines and agricultural machinery. The products are sold under the brand names SaME, LaMBOrGhINI, DEUTZ-Fahr and hÜrLIMaNN.

The company strategy, which has always been focused on interna-tionalization, is based on a combination of decentralized production plants and a close-meshed distribution network. Sales, after-sales service and sales of spare parts are provided by 14 branches, 120 import firms and 3,000 authorized dealers all over the world.

The group’s production network is comprised of plants in Europe (Italy, Germany, Croatia and russia), one in India which is set for massive expansion, and one currently under construction in China. The extensive range of tractors consists of 40 to 275 hp models, to ensure that every conceivable application is covered. With mo-dels ranging from 120 to 450 hp, the group’s series of combine harvesters covers the core segment of the market. The investment made in DEUTZ aG has now also helped SaME DEUTZ-Fahr to be-come the world’s number one manufacturer in the industrial diesel engines sector.

DeUtZ-fahRsame DeUtZ-fahR gROUP

Subsidiaries

56

DeUtZ-fahRsame DeUtZ-fahR gROUP

Production Locations

15 C 100 M 65Y

nero

15 C 100 M 65Y

nero

58

technical Data

59

DeUtZ-fahRtechnical Data

60

Tractors 39-75 hp

Agrolux 65 75

homologated power (2000 / 25 EC) kW / hp 46.5 / 62 54 / 72

Max. torque Nm 240 265

Cylinders / displacement n°/ cc 3 / 3,000

Lifting capacity kg 3,000

Width min mm 1,969 1,985

Weight with safety frame kg 2,800

Agrokid 210 220 230

Max. power kW / hp 28.5 / 39 31.5 / 43 37 / 51

homologated power (2000 / 25 EC) kW / hp 28.5 / 39 31.5 / 43 37 / 51

Max. torque Nm 83 100 122

Cylinders / displacement n°/ cc 4 / 1,500 4 / 1,758



Weight with cab kg 1,350 1,420

Weight with safety frame kg 1,250 1,320

Specialist tractors

Agroplus V 320 330 410 420 430

Max. power kW / hp 60 / 82 66 / 90 63 / 85 71 / 96 75 / 102

homologated power (2000 / 25 EC) kW / hp 60 / 82 66 / 90 63 / 85 71 / 96 75 / 102

Max. torque Nm 310 340 345 373 390




Weight with cab kg 2,660 2,740 2,800 3,000

Weight with safety frame kg 2,450 2,590 2,650

Agrolux 310 320 410

Max. power kW / hp 46 / 62 54 / 72 55 / 75

homologated power (2000 / 25 EC) kW / hp 44 / 59 51.5 / 69 55 / 75




Width min mm 1,976


Agroplus S 320 330 410 420 430

Max. power kW / hp 60 / 82 66 / 90 63 / 85 71 / 96 75 / 102


Max. torque Nm 310 340 345 373 390







61

Agroplus F 320 410 420 430

Max. power kW / hp 60 / 82 63 / 85 71 / 96 75 / 102

homologated power (2000 / 25 EC) kW / hp 60 / 82 63 / 85 71 / 96 75 / 102

Max. torque Nm 310 345 373 390



Width min mm 1,450



Specialist tractors

Agroplus F 310 315 320 405 410 420

Max. power kW / hp 46 / 62 53 / 72 60 / 82 59 / 80 63 / 85 70 / 95

homologated power (2000 / 25 EC) kW / hp 46 / 62 53 / 72 60 / 82 59 / 80 63 / 85 70 / 95

Max. torque Nm 240 265 310 325 345 373


Lifting capacity kg 2,600 3,000

Width min mm 1,514


Tractors 62-163 hp

Agroplus 315 320 410 420

Max. power kW / hp 53 / 72 60 / 82 63 / 85 70 / 95


Max. torque Nm 265 310 345 373






Agroplus 310 315 320 410

Max. power kW / hp 46 / 62 53 / 72 60 / 82 63 / 85


Max. torque Nm 240 265 310 345







62

Tractors 62-163 hp

Agrofarm 420 430

Max. power kW / hp 73 / 99 80 / 109

homologated power (2000 / 25 EC) kW / hp 73 / 99 80 / 109




Width min mm 2,050

Weight with cab kg 4,500

Agrofarm T/TB/T 410 415 420 425

Max. power kW / hp 62.5 / 85 65 / 88 73 / 99 75 / 102

homologated power (2000 / 25 EC) kW / hp 62.5 / 85 65 / 88 73 / 99 75 / 102

Max. torque Nm 320 345 380 376

Cylinders / displacement n°/ cc 4 / 4,038 4 / 4,000 4 / 4,038 4 / 4,000

Lifting capacity kg 4,300 4,200 5,100 4,200

Weight with safety frame kg 3,300 3,350 3,500 3,600

Agrofarm 410 420 430

Max. power kW / hp 62.5 / 85 73 / 99 80 / 109

homologated power (2000 / 25 EC) kW / hp 62.5 / 85 73 / 99 80 / 109



Lifting capacity kg 4,300 5,100 5,300

Width min mm 2,050

Weight with cab kg 3,700 4,050 4,100

Weight with safety frame kg 3,440 3,650 –

Agrotrac 610 620

homologated power (ECE r24) kW / hp 103 / 140 120 / 163







Agrofarm TTV 420 430

Max. power kW / hp 73 / 99 80 / 109





Width min mm 2,050



63

Tractors 112-127 hp

Agrotron K 410 420 610 430

Max. power kW / hp 73 / 100 82 / 112 95 / 130 95 / 130*


Max. torque Nm 378 398 420 475

Cylinders / displacement n°/ cc 4 / 4,038 6 / 6,057 4 / 4,038



Tractors 132-192 hp

* with PTO boost

Agrotron K 420 610 430

Max. power with DPC kW / hp 82 / 112 89 / 121 95 / 130*

homologated power (2000 / 25 EC) kW / hp 82 / 112 87 / 119 93 / 127

Cylinders / cylinder capacity No. / cm3 4 / 4,038 6 / 6,057 4 / 4,038

Speeds (with creepers) / Powershift F / r 24 / 8 (36 / 12) / 3-stage with aPS

PTO ¹/min 540 / 540 E / 1,000 / 1,000 E

Lifting force rear kg 6,220

Unladen weight kg 4,440 4,850 4,440

Agrotron M 620 625 640 650

Max. power kW / hp 122 / 166 132 / 180 141 / 192





Weight with cab kg 5,610 5,970 6,750

Agrotron M 600 410 610 615 420

Max. power kW / hp 103.5 / 141 104.5 / 142 109.5 / 149 116 / 158

homologated power (2000 / 25 EC) kW / hp 97 / 132 98.5 / 134 106.5 / 145 113 / 154

Max. torque Nm 527 599 574 669

Cylinders / displacement n°/ cc 6 / 6,057 4 / 4,038 6 / 6,057 4 / 4,038




64

Tractors 132-192 hp

Tractors 165-275 hp

Agrotron L 710 720

Max. power kW / hp 145 / 197 162 / 220






Agrotron TTV 610 620 630

Max. power kW / hp 121 / 165 135 / 184** 165 / 224**






* with PTO boost** with PTO boost / transport boost

Tractors 200-275 hp

Agrotron X 710 720

Max. power kW / hp 184 / 250* 202 / 275


Max. torque Nm 961 1,075




Agrotron M 620 625 640 650

Max. power with DPC kW / hp 122 / 166 122 / 166 133 / 181 141 / 192


Cylinders / cylinder capacity No. / cm3 6 / 6,057


PTO ¹/min 540 / 540 E / 1,000 / 1,000 E

Lifting force kg 9,200

Unladen weight kg 5,810 5,810 5,970 6,520

Agrotron M 600 410 610 615 420

Max. power with DPC kW / hp 97 / 132 104 / 142 107 / 146 110 / 149 116 / 157


Cylinders / cylinder capacity No. / cm3 6 / 6,057 4 / 4,038 6 / 6,057 4 / 4,038


PTO ¹/min 540 / 540 E / 1,000 / 1,000 E

Lifting force kg 9,200

Unladen weight kg 5,460 5,155 5,530 5,435


65

Agrovitis 175 200

Max. power (2000 / 25 EC) kW / hp 129 / 175 147 / 200

Cylinders / cylinder capacity No. / cm3 6 / 6,057

Max. speed km / h 20, 25 or 40

Four-wheel drive up to 13 km/h, above 14 km/h rear-wheel drive

hydraulic System Load-sensing with 212 l / min pump

height (min. / max.) mm 3,800 / 4,550

Width mm 2,600 - 2,980

Unladen weight kg from 7,990

Grape harvesters

Crawler

Agroclimber V 320 F 400 F 410 410

Max. power kW / hp 60 / 82 62.5 / 85 70 / 95 75 / 102

homologated power (2000 / 25 EC) kW / hp 60 / 82 62.5 / 85 70 / 95 75 / 102

Max. torque Nm 310 345 373 376

Cylinders / displacement n°/ cc 3 /3,000 4 / 4,000


Width min mm 1,180 1,360 1,460 1,800


Agrovector 29.6 29.6 LP 35.7 40.8 40.9

Max. power at 2.200 ¹/min kW / hp 75 / 102

Max. lifting force kg 2,900 3,500 4,000

Lifting capacity at max. height kg 2,420 2,600 4,000

Max. lifting height m 5.8 6.90 7.90 9.00

height of the machine mm 2,180 1,989 2,370 2,450

Width of the machine mm 2,040 2,330 2,380

Turning circle m 3.65 3.90 4.00

Unladen weight with pallet fork kg 6,060 7,400 8,100

Telescopic handlers

DeUtZ-fahR

66

technical Data

Combine harvesters

60 series 6060 6065 6090 6095

Cutting width m 4.20 - 6.30 4.80 - 7.20 5.40 - 7.20

Engine kW / hp 184 / 250 228 / 310 228 / 310 269 / 366

Treshing drum diameter / width mm 600 / 1,270 600 / 1,521

Turbo separator (TS) on request standard on request standard

Walker area m2 7.36 or 8.80

Sieve area m2 5.28 6.32

Grain tank volume l 7,500 8,500

54er series 5435 5445 5465 5485 5495

Cutting width m 3.10 - 3.45 3.10 - 4.20 3.45 - 4.50 3.90 - 5.10

Engine kW / hp 88 / 120 114 / 155 136 / 185 154 / 210

4-cyl. engine 120 - - -

6-cyl. engine - - 155 185 210

Walker area m2 3.86 4.20


Grain tank volume l 3,300 3,700 4,200 5,200

Tandem treshing system - standard

60 series 6040

Cutting width m 4.20; 4.80; 5.20

Engine kW / hp 164 / 222

Treshing drum diameter / width 600 / 1,270

Walker area m2 5.28

Sieve area m2 4.22

Grain tank volume l 6,500

DeUtZ-fahR

67

technical Data

Combine harvesters

BALANCE 6060 6065 6090 6095

Cutting width m 4.20 - 6.30 4.80 - 7.20 5.40 - 7.20

Engine kW / hp 184 / 250 228 / 310 228 / 310 269 / 366

Treshing drum diameter / width mm 600 / 1,270 600 / 1,521

Turbo separator (TS) standard

Walker area m2 7.36 or 8.80


Grain tank volume l 7,500 8,500

Climber 6060

Cutting width m 4.20 - 6.30


Treshing drum dia meter / width mm 600 / 1,270

Turbo separator (TS) standard

Walker area m² 7.36

Sieve area m² 5.28


RTS 7545

Cutting width m up to 7.20


rotor diameter / length mm 750 / 3,150

Four-wheel drive standard

Treshing / separating area m2 2.45

Sieve area m2 4.78


EVOLVING AGRICULTURE.

This printed material is designed for international use. The illustrations it contains show both special equipment and incomplete standard equipment. The availability of some illustrated models, standard and special equipment can vary from country to country. Only the dealer‘s price list stipulates whether such illustrated equipment is included as a standard feature or whether it is a special accessory. In addition the illustrated mounted implements and special accessories may not always comply with the respective statutory regulations. It is the responsibility of the customer – after consultation with the dealer – to verify this, taking the operating instructions into account. all information and illustrations in this brochure are subject to correction; errors excepted. Furthermore all information contained in this brochure is not binding and is subject to modifications of a technical and commercial nature or those resulting from statutory regulations. No claims whatsoever can be derived from these. SaME DEUTZ-Fahr DEUTSChLaND Gmbh reserves the right to make any changes to the design and technical construction and also the scope of standard equipment at any time and without prior notice. Cod. 308.8350.3.4-6 - CFV - 10/10

SAME DEUTZ-FAHR DEUTSCHLAND GmbH, D-89415 Lauingen, www.deutz-fahr.de

Documents

PRODUct Range 2011 - Neu-Trek Fahr Kataloguste/308.8350.3.4-6... · range of DEUTZ-Fahr tractors. 1965 D-05. Four-wheel drive was offered for the first time for the D 6005 ... DEUTZ