17
CLICK HERE Find out where your nearest Maguire Partner is located … 04 CONTACT CLICK HERE View our full technical specification … 03 MODEL SUMMARY CLICK HERE Determine the number of receivers to be included in your system and confirm … 02 HOW IT WORKS CLICK HERE Provides all the benefits of a mini-central system with the added … 01 OVERVIEW Materials Conveying Product Guide EFFECTIVE & INNOVATIVE MATERIALS CONVEYING AND CONTROLS

Product Guide Download

Embed Size (px)

Citation preview

Page 1: Product Guide Download

click here

Find out where your nearest Maguire Partner

is located …

04ContaCt

click here

View our full technical specification …

03Model

suMMary

click here

Determine the number of receivers to be

included in your system and confirm …

02How it works

click here

Provides all the benefits of a mini-central system

with the added …

01overview

Materials ConveyingProduct Guide

effective & innovative materials conveying and controls

Page 2: Product Guide Download

Full view of the loading actionDirect view of the loading makes it easy for operators to monitor operation and adjust fill times.

Reduction of clogging Clogging is reduced with a patented deceleration chamber that facilitates separation of material from the air stream and a fast-action slide-gate that prevents pellet entrapment during material discharge.

Low wear and maintenanceThe stainless steel blast plate that deflects material into the receiver is replaceable. The system uses only a single, brushless motor and receivers have no filters to clog.

Ready access for cleanoutThe top cover of the receiver includes the vacuum valve, material inlet and cleanout port. The dust collector features a bag type filter with blow-back and a hinged pivot tray for easy removal.

The Maguire Loading System (MLS) controllerTwo types of control – classic analogue 8 station control or new flexbus control expandable to 24 stations.

Easy setting of fill timePush-button activation of the “Autofill”software sets the fill-time for each station.

Automated loadingThe controller sequences through the various stations, loading each as the level sensor at the station calls for material.

Load failure alarm A load-failure alarm with reset is incorporated in the controller.

Remote controller operationEach controller is removable for remote operation.

Multiple power unit sizesThe power unit is portable, and is available with a 1, 2.5, 5 or 10 HP blower.

Multiple small systems increase reliabilityThe use of several Clear-Vu® Loading Systems instead of reliance on a single larger central system increases versatility and ensures continued production

The Maguire Loading System (MLS)

LOWRUNNING

COSTS

Provides all the benefits of a mini-central system with the added convenience of portability and low maintenance

AUTOMATICLOADING OF UP TO

6,000lbs/hr (2,727 kg/hr)

STAndARd FEATuRES incLudE

Clear-Vu®

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

overviewProvides all the benefits of a mini-central system with the added …

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying overview

mlsflexbus system

Page 3: Product Guide Download

The FlexBus Loading SystemA single wire connects all receivers in the system so the system is easily expanded to meet your needs.

central vacuum system efficiencyUtilizing a 3-phase vacuum pump to supply multiple vacuum receivers is much more efficient that using separate vacuum loaders.

Easy installationInstall a single wire and conveniently located drops to connect the control to all receivers and pumps.

System grows with your needsEach FlexBus central control allows addition of up to 5 pumps and up to 24 receivers per pump for a total of 120 receivers.

Local receiver controlProvides ON/OFF and loading time convenience. No need to run back to the central control.

Full featured central controlAdjustable load, unload, priority, proportioning, purge, blowback and alarm settings.

The FlexBus System allows you to avoid the guesswork associated with central system conveying. Start with one central FlexBus loading control using only one pump and receiver if you like. In time, you can control up to 5 pumps and 120 receivers (24 per pump) with that single central controller.

Add AS you gRow TIMEsaving

OPERATION

Built-in control on Novatec GVR Series receivers. Fully enclosed control available

for other receivers.

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

overviewProvides all the benefits of a mini-central system with the added …

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying overview

mlsflexbus system

Page 4: Product Guide Download

The Maguire Loading System (MLS)

LIW HOPPER LIW HOPPER

AVR RECEIVER AVR RECEIVER

MATERIAL LINE MATERIAL LINE

VACUUM LINE

MLS POWER UNIT

Power unitsInclude pump, dust collector and controller1, 2.5, 5 and 10 Hp(.75, 1.9, 3.7 and 7.5 kw)

Receivers1, 10 and 20 lb capacities(.45, 4.5 and 9 kg)

EFFICIENT &

siMPLEDESIGN

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

how it worksProduCt Guide

Materials ConveyingoverviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

mlsflexbus system

Page 5: Product Guide Download

Easy to use How it works

The FlexBus Loading System

FLExBuS LoAding conTRoLLER

FLExBuS oPERAToR inTERFAcE

FLExBuS REciEvER conTRoL ModuLE

FLExBuS PuMP conTRoL ModuLE wiTh PowER SuPPLy

• 7” Color Touch Screen

• Control up to 5 pumps & 120 receivers (24 receivers per pump)

• Auto ID of receivers for easy system expansion

• Includes power supply and pump control board

• Audible and Visual Alarms

• Single wire CANbus connectivity

• Adjustable load, unload, priority, proportioning, purge, blowback and alarm settings

• 24 Vdc Control Voltage

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

how it worksProduCt Guide

Materials ConveyingoverviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

mlsflexbus system

Page 6: Product Guide Download

Easy to use How it works

The FlexBus Loading System

FLExBuS LoAding conTRoLLER

FLExBuS oPERAToR inTERFAcE

FLExBuS REciEvER conTRoL ModuLE

FLExBuS PuMP conTRoL ModuLE wiTh PowER SuPPLy

• Same features as Loading Controller

• Powered by CAN network

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

how it worksProduCt Guide

Materials ConveyingoverviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

mlsflexbus system

Page 7: Product Guide Download

Easy to use How it works

The FlexBus Loading System

FLExBuS LoAding conTRoLLER

FLExBuS oPERAToR inTERFAcE

FLExBuS REciEvER conTRoL ModuLE

FLExBuS PuMP conTRoL ModuLE wiTh PowER SuPPLy

• CANbus system interconnect

• Local control of basic loading parameters

• Easily retrofit to existing receivers

• ON/OFF control

• Local Load Time adjustment

• 24 VDC sensor & solenoid connections5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

how it worksProduCt Guide

Materials ConveyingoverviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

mlsflexbus system

Page 8: Product Guide Download

Easy to use How it works

The FlexBus Loading System

FLExBuS LoAding conTRoLLER

FLExBuS oPERAToR inTERFAcE

FLExBuS REciEvER conTRoL ModuLE

FLExBuS PuMP conTRoL ModuLE wiTh PowER SuPPLy

• CANbus system interconnect

• Easily retrofit to existing pumps

• 24 VDC output for pump control

• Provides power for the CANbus network

• 115 VAC Operating Voltage

• FlexBus Pump Control Module

• CANbus system interconnect

• Easily retrofit to existing pumps

• ON/OFF control

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

how it worksProduCt Guide

Materials ConveyingoverviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

mlsflexbus system

Page 9: Product Guide Download

Easy to use How it works

The FlexBus Loading System

Main control

Pump controlFB-TB Bulk Cable Connection

ProportioningValve Option

Purge ValveOption

Receiver Control

To MoreReceivers

Selecting what you need1. Determine the number of receivers to be included in

your system and confirm conveying rates and efficiency with your MAGUIRE representative.

2. Determine cable lengths, allowing for normal routing between loading stations, around obstructions, wire paths, etc.

The Maguire Flexbus loading control system intergrates with the existing range of Maguire conveying equipment, but can readily intergrate with many other manufacturers equipment. This allows users to benefit from the latest controls that utilises the equipment and expand your Maguire Conveying as required.

i

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

how it worksProduCt Guide

Materials ConveyingoverviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

mlsflexbus system

Page 10: Product Guide Download

Technical SpecificationMLS LoAding SySTEM FLExBuS conTRoL coMPonEnTS

A B C

MODEL Hp kw in. cm in. cm in. cm

MLS-180 1 .75 20 51 48 122 23 58

MLS-280 2.5 1.9 20 51 48 122 23 58

MLS-580 5 3.7 20 51 48 122 23 58

MLS-1080 10 7.5 36 91 58 147 23 58

Power units

A B C

MODEL lb kg in. cm in. cm in. cm

AVR-1 & -1.5 1 .45 8.25 21 14 36 12.17 31

AVR-101 & -102 10 4.5 9.375 23.8 21.7 55 18.125 46

AVR-201 & -202 20 9 9.375 23.8 35.8 91 18.125 46

Receivers

A

C

C

B

B

MLS Power Unit

AVR Receiver

A

C

C

B

B

MLS Power Unit

AVR Receiver

Accessories Order

Loading Control

Part # FB-C1 (115 VAC) Part # FB-C2 (230 VAC)

Operator Interface

Part # FB-0I

Pump Control Module

Part # FB-PC (24 VDC) one for each vacuum pump

Pump Control Module W/Power Supply

Part # FB-PCP1 (115 VAC)

Part # FB-PCP2 (230 VAC)

Receiver Control Module

Part # FB-RC (24 VDC) one for each 24 VDC receiver

Service T, Single Position

Part # FB-T CANbus system interconnect

FlexBus Drop

Part # FB-D System interconnect for 1 receiver includes 30 foot cable drop with connector

FlexBus Hub

CANbus system interconnect with 20 foot cable drop

Part # FB-H2 for 2 receivers

Part # FB-H4 for 4 receivers

Part # FB-H6 for 6 receivers

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

model summaryProduCt Guide

Materials ConveyingoverviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

Page 11: Product Guide Download

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying

overviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-MLS

north america

south america

europe

africa

asia

middle east

key to locations

Regional Head Offices

l Maguire Branches

l Maguire Partners

i

Page 12: Product Guide Download

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying

overviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-MLS

north america

south america

europe

africa

asia

middle east

key to locations

Regional Head Offices

l Maguire Branches

l Maguire Partners

i

hEAd oFFicES

Maguire USA11 Crozerville RoadAston, PA 19014Toll free: 888-459-2412Tel: 610-459-4300Fax: 610-459-2700Email: [email protected]

Maguire Canada299 Basaltic Road, Unit 1Vaughan, Ontario, L4K 4w8Toll free: 866-441-8409Tel: 905-879-1100Fax: 905-879-1101Email: [email protected]

PARTnERS

NEW ENGLAND TERRITORY(ME, NH, MA, CT, RI, VT)HAMILTON PLASTICS EqUIPMENT, LLC25 Bartlett DriveBedford, NH 03110Mark HamiltonTel: (603) 472-3282Fax: (603) 714-5746Email: [email protected]: www.HamiltonPlasticsEquipment.com

NORTH NEW JERSEY TERRITORY(SE. NY, N. NJ)R. T. KUNTz COMPANy, INC.5142 west Hurley Poad RoadP.O. Box 476Farmingdale, NJ 07727Rod Kuntz, Brian Sampson and Scott ThompsonTel: (732) 751-1770Fax: (732) 751-1505Email: [email protected]: www.rtkuntz.com

THE MACHINERy GROUP1156 Springfield AveMountainside, NJ 07092Alan Niebuhr, Tom waldron, Andrew Niebuhr, and Chris DidonatoTel: 908-389-1009Fax: 908-389-1060

MID-ATLANTIC TERRITORY(E. PA, S. NJ, DE, MD, VA)PLASTIC MACHINERy SALES1365 Kings Hwy.Pilesgrove, NJ 08098Herb Keaton and Pat McGuireTel: (856) 769-1415Fax: (856) 769-1708Email: [email protected]

PARAGON MACHINERy INC.244 wisteria DriveChurchville, PA 18966Steve Etris, Eric HendersonTel: 215-322-7386Fax: 215-355-1145Email: [email protected]

SOUTHEASTERN TERRITORY(NC, SC, GA, FL, AL, E. TN)JUST ADD PLASTIC, INC.5257 Essex FarmsStone Mountain, GA 30088Pat Mcquade, Jim Kean, Tom Kean, and Gary EggersTel: (770) 981-3244Fax: (770) 593-2166Email: [email protected]: www.JustAddPlastic.com

SOUTHEASTERN POLyMER MACHINERy, INC.2515 Ivy Street westCumming, GA 30041Contacts: walt Terry, Sr., walt Terry, Jr.Tel: 770-889-3448Fax: 770-889-4988Email: [email protected]: http://www.spm-inc.net

NEW YORK, WEST PENNSYLVANIA, AND WEST VIRGINIA TERRITORYGEM CITy PLASTIC MACHINERy, INC.99 Ken Mar Industrial ParkwayCleveland, OH 44147Nick Rajkovich, Jerry Pochatek, Scott BalcomTel: 440-526-0678Fax: 440-838-4757E-mail: [email protected]@[email protected]

OHIO, INDIANA, KENTUCKY TERRITORYMIKE CINDIA SALES, INC.7244 Hartman Roadwadsworth, OH 44281Mike Cindia, Bret Irons, Craig Jans, Bill BirchTel: (330) 334 4994Fax: (330) 334 4996Email: [email protected]

MICHIGAN TERRITORYMANVEL MACHINERy SALES CO. INC.5275 Dixie Highway, Suite C-4waterford, MI 48329Harry Manvel, Jim weesiesTel: (248) 666-7700Fax: (248) 666-3442Email: [email protected]: http://www.Manvel.com

CHICAGO TERRITORY(N. IL, SW. WI)NORTHwOODS PROCESS TECHNOLOGy911 Althoff Dr.McHenry, IL 60051Terry DevoyTel: 847 514 5514Email: [email protected]: www.npt-sales.com

NORTH-CENTRAL TERRITORY(ND, SD, MN, W WI, N. IA)CARROLL ENTERPRISES, INC.Pete CarrollPat Carroll4100 Elm StreetOrono, MN 55356Tel: 952-476-8767Fax: 952-476-0977Email: [email protected]

CENTRAL TERRITORY(IA, NE, WY, CO, KS, MO, S. IL)BARRy SALES ENGINEERING, INC.1755 Larkin williams RoadFenton, MO 63026Chris Barry, Nick Klukvin, Timm DuceyTel: (636) 326-1211Email: [email protected]

SOUTH CENTRAL TERRITORY(TX, NM, OK, AR, LA, MS)ADAMS ENGINEERS & EqUIPMENT, INC.13638 Highway 110 SouthTyler, TX 75713-0956Don Gruber, Patti Pinkerton, Cliff Adams, David Salls, Steve whiteTel: (903) 561-8835Fax: (903) 561-6862Email: [email protected]: http://www.adamsengineers.com

NORTHWEST TERRITORY(WA, OR, ID, MT)wOODS PLASTICS EqUIPMENT1700 River Park Blvd.Napa, Ca 94559Terry S. woodsTel: 707-363-1514Email: [email protected]: www.woodsplastics.com

SOUTHWEST TERRITORY(S. CA, AZ)HANSEN PLASTIC MACHINERy SALESBusiness address:1437 Random LaneDuarte, CA 91010-2629Charlie HansenTel: (626) 359-7852Fax: (626) 359-0552Email: [email protected]

NORTH CALIFORNIA TERRITORY(N. CA, NV, UT)SMITH MACHINERy SALES5279 N. Cambridge wayStansbury Park, UT 84074George SmithTel: 800-688-8760Fax: 435-249-0297Email: [email protected]: www.smsplastics.com

noRTh AMERicA

x

Page 13: Product Guide Download

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying

overviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-MLS

north america

south america

europe

africa

asia

middle east

key to locations

Regional Head Offices

l Maguire Branches

l Maguire Partners

i

SouTh AMERicA

x

hEAd oFFicE

Maguire USA11 Crozerville RoadAston, PA 19014Toll free: 888-459-2412Tel: 610-459-4300Fax: 610-459-2700Email: [email protected]

MAguiRE oFFicES

BRAZILDéBORA wOIGTGerente de vendasMaguire ProductsTel: (19) 8307-3000Email: [email protected]

PARTnERS

ARGENTINA, PARAGUAY & URUGUAY BREGAR ARGENTINA S.A.Haiti 1772, B 1640 EBTMartinez, Buenos AiresArgentinaContact: Esteban HuberTel: (54) 11-47170600Fax: (54) 11-47170909Email: [email protected]: www.bregarargentina.com.ar

BRAZILALIMATIC LTDA Rua Rosaria 32CEP 09061-080 Santo AndréSão Paulo-BrasilContact: Alexandre CorradiTel: + 5511 4473 3711Fax: + 5511 4421 8312Email: [email protected]

CHILEPLASTEC U.S.A. INCORPORATED7752 N.w. 74 AvenueMiami, Florida 33166David Sosa - Product Sales Mgr.Gladys Estrada - Dryer Sales Mgr.Tel: 1-305 887 6920Fax: 1-305 883 8254Email: [email protected]: www.plastecusa.com

ALIMATIC LTDARua Rosaria 32CEP 09061-080 Santo AndréSão Paulo-BrasilContact: Alexandre CorradiTel: + 5511 4473 3711Fax: + 5511 4421 8312Email: [email protected]

MEXICO, CENTRAL & SOUTH AMERICAPLASTEC U.S.A. INCORPORATED7752 N.w. 74 AvenueMiami, Florida 33166David Sosa - Product Sales Mgr.Gladys Estrada - Dryer Sales Mgr.Tel: 1-305 887 6920Fax: 1-305 883 8254Email: [email protected]: www.plastecusa.com

PUERTO RICO & CARIBBEANPLASTEXPO Box 997Guaynabo, PR 00970-0997John HammelTel: 787-272-8050Fax: 787-830-2202Email: [email protected]: www.plastexcorp.com

VENEZUELAPLASTEC U.S.A. INCORPORATED7752 N.w. 74 AvenueMiami, Florida 33166Janet Kevlin - Product Sales ManagerTel: 1-305 887 6920Fax: 1-305 883 8254Website: www.plastecusa.comEmail: [email protected]

Page 14: Product Guide Download

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying

overviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-MLS

north america

south america

europe

africa

asia

middle east

key to locations

Regional Head Offices

l Maguire Branches

l Maguire Partners

i

hEAd oFFicE

Maguire EuropeTame Park, Tamworth, StaffordshireB77 5Dy, UKTel: +44 1827 265 850Fax: +44 1827 265 855Email: [email protected]

MAguiRE oFFicE

ITALYMAGUIRE ITALIAPadova - ItalyTel: +39 049 970 5429Fax: +39 049 971 1838Email: [email protected]

PARTnERS

AUSTRIABüCHLER GESMBHwipfingerstrasse 233433 KönigstettenMr. Peter BüchlerTel: +43 2273 21 77 0Fax: +43 2273 21 77 22Email: [email protected]: www.buechler.at

BELGIUM, LUXEMBOURG & NETHERLANDSPME - PLASTIC MACHINERy EqUIPMENT NVIndustriezone IIBallingsweg 25B-9620zottegemBelgiumyves DrappierGeneral ManagerTel: 32 9 361 03 31Fax: 32 9 361 03 32Email: [email protected]: www.pme.be

BOSNIA, CROATIA, HERZEGOVINA, MACEDONIA, MONTENEGRO & SERBIATOP TEH PREDSTAVNISTVOSutjeska 7, 21314 Nestin-Backa PalankaSrbijaMr. Petar PreradovicTel: +381 21 769 040Fax: +381 21 769 038Mobile: +381 64 20 70 826Website: www.topteh.siEmail: [email protected]

CZECH REPUBLICA.M. SPOL SROSladovnicka 167, 463 11 LiberecLibor Hosic - DirectorTel: +420 482 750 037Fax: +420 485 163 999Email: [email protected]

DENMARKANDERTECH PLASTTEKNIK A/SBakkegaardsvej 406 BDK-3050 HummlebaekKen Mark, Account Manager Tel: 45-4915 0400Fax: 45-4915 0401Email: [email protected]

FINLANDBOwTEC OyAlakartanonkuja 1A602360 Espoo, FinlandMr Pontus westerbergTel: +358 4 585 50 202Email: [email protected] Website: www.bowtec.fi/

FRANCEMARTIPLAST S.R.L z.A. Des LavoursMartignat, 01100, FranceHervé Carlod - PDGTel: 33 -74 81 13 20Fax: 33-74 81 10 12Email: [email protected]

FILM INDUSTRy SPECIALISTPronix, 83, Boulevard BerthierParis, 75017, FranceMr. Christophe ChemelTel: + 33 1 44 29 79 79Fax: + 33 1 44 29 79 70Email: [email protected]

GERMANYDIGICOLOR GMBHEckendorfer Strasse, 125aD-33 609 BielefeldMr. Hans Jürgen HainTel: 49-521 972520Fax: 49-521 74446Email: [email protected]

LABOTEK DEUTSCHLAND GMBHMathildenstr. 16D-42105 wuppertal, GermanyTel: +49 202 74 75 85 - 0Fax: +49 202 74 75 85 - 11Email: [email protected] Website: www.labotek-de.com

GREECEORBIT POLyMERS SA14, Pentelis AvenueVrilissia, Athens, 152 35GreeceMr Atha TriantafillouTel: + 30 210 68 37 097Fax: + 30 210 68 28 882Email: [email protected]

GREECE Film Extrusion SpecialistMP EXTRUDERSTatoiou 118 MetamorfosiAthens, GreeceContact Mr Dimitris KotsopoulosTel: +302102817901Fax: +302102817901Email: [email protected]: www.mpextruders.com

HUNGARYBüCHLER GESMBHwipfingerstrasse 233433 Königstetten, HungaryMr. Csaba JozanTel: +43 2273 21 77 0Fax: +43 2273 21 77 22Email: [email protected]: www.buechler.at

NORWAYSCAN POLyMER ASNiels Leuchsvej 99, NO-1359 EiksmarkaNorwayKlaus LienTEL: +47 67 16 21 84FAX: +47 67 14 30 44Email: [email protected]: www.maguire.com

POLANDMUEHSAM-ELEKTROMECH341 Patriotów Street, 04-760 warsaw, PolandPiotr LubachTel: +48 22 517 30 40Fax: +48 22 517 30 54Mobile: +48 505 128 998Email: [email protected]

RUSSIARIVERDALE COLOR RUNevsky Pr. 22-24191186, Saint-Petersburg, RussiaAlexander GrigoryevTel: +7 812 949 87 14Fax: +7 812 497 22 53Email: [email protected]: grigoryev_alexwebsite: www.riverdalecolor.ru IBC SySTEMSKuskovskaya str. 20A, off. 611A111141 Moscow, RussiaNebojsa Mrkaljevic - General ManagerTel: +7 495 727 05 28Fax: +7 495 727 05 29Email: [email protected]: www.ibcplastic.ru

SLOVAKIAA.M.SK, SPOL. S R.O.Pri Dynamitke 7, 831 03 BratislavaMr. Tomas MatuskaTel: +421 905 349 777Fax: +421 2 4463 8827Email: [email protected]

SLOVENIATOP TEH D.O.O.Cesta Toneta Kralja 261290 Grosuplje, SlovenijaTel: +386 1 787 16 61Fax: +386 1 787 16 62Website: www.topteh.siEmail: [email protected]

SPAINALIMATIC SLC/ Andorra 19B,19C08830 Sant Boi de LlobregatBarcelona, SpainAlex Revoltos - Sales DirectorTel: + 34 936 525 680Fax: +34 93 652 56 86Email: [email protected]: www.alimatic.com

SWEDENLABOTEK NORDIC ABNorra Industrigatan 1SE-274 30 SkurupSwedenJonas SvenssonTel: +46 411 401 55Fax: +46 411 401 56Email: [email protected]: www.laboteknordic.se

SWITZERLANDTHOMAPLAST GMBHBoesch 416331 HuenenbergSwitzerlandContacts: Josef Thoma and Stefan ImhofTel: 0041 41 784 41 20Fax: 0041 41 784 41 21Email: [email protected]: www.thomaplast.ch

TURKEYPLASTTEKNIK ITHALAT IHRACAT LTD STIBayar Caddesi, Sitma Pinar Sokak,Tara Apt. No:9/3 34742, Kozyatagi-Kadikoy-Istanbul,TURKEyTel: +90 216 380 99 92Fax: +90 216 380 99 93Email: [email protected]

UKRAINEIBC SySTEMSMarini Raskovoy str. 19,2902002 Kiev, UkraineTel: +38 044 2049648Fax: +38 044 5411213Email: [email protected]: www.ibcplastic.ru

UNITED KINGDOMSUMMIT SySTEMS LTDVanguard, Tame ParkTamworth, StaffordshireB77 5Dy United KingdomMike Jordan - MDTel: 44-1827-265-800Fax: 44-1827-265-801Website: www.summitsystems.co.ukEmail: [email protected]

EuRoPE

x

Page 15: Product Guide Download

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying

overviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-MLS

north america

south america

europe

africa

asia

middle east

key to locations

Regional Head Offices

l Maguire Branches

l Maguire Partners

i

MiddLE EAST

x

hEAd oFFicE

Maguire EuropeTame Park, Tamworth, StaffordshireB77 5Dy, UKTel: +44 1827 265 850Fax: +44 1827 265 855Email: [email protected]

PARTnERS

ISRAELFLORMAHabanai St. No. 5Industrial Area Gil-Amal, MagdielHod Hasharon 45100IsraelDaniel FlorenthalTel: +972 9 7442921Fax: +972 9 7442920Email: [email protected], [email protected]: www.florma.co.il

LEBANONACIS-PLASTIC TECHNOLOGIESLebanon BranchMr George ValassidisTel: +966 1 206 4804Fax: +966 1 206 4875Mobile: +966 5 449 1764Email: [email protected]

SAUDI ARABIAACIS - ARABIAN COMMERCIAL & INDUSTRIAL SERVICESKanoo Building, 2nd FloorKind Abdul Aziz StreetRiyadhKingdom of Saudi ArabiaMr George ValassidisTel: +966 1 206 4804Fax: +966 1 206 4875Email: [email protected]

SYRIAENG. SAMIR AL KHOURyACIS-Plastic TechnologiesSafitaTartousSyriaTel: +963 43 521 104Fax: +963 43 524 039Mobile: +963 93 575 123Email: [email protected]

UAEPOLyMATION MIDDLE EAST & AFRICA FzCPO Box 16111, Ras Al Khaimah, UAEEd FitzgeraldTel: +971 720 76672 Fax: +971 720 41010 Email: [email protected]: www.poly-mation.com

Page 16: Product Guide Download

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying

overviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-MLS

north america

south america

europe

africa

asia

middle east

key to locations

Regional Head Offices

l Maguire Branches

l Maguire Partners

i

AFRicA

x

hEAd oFFicE

Maguire EuropeTame Park, Tamworth, StaffordshireB77 5Dy, UKTel: +44 1827 265 850Fax: +44 1827 265 855Email: [email protected]

EGYPT, GHANA, IVORY COAST, MOROCCO, NIGERIA MAGUIRE EUROPE Tame ParkTamworth, StaffordshireB77 5Dy United KingdomChris Crittenden - Marketing DirectorTel: 44-1827-265-800Fax: 44-1827-265-801Website: www.maguire.comEmail: [email protected]

PARTnERS

SOUTH AFRICA

JOHANNESBURGHESTICO (PTy) LTD94-96, 10th RoadKew 2090PO Box 1985, Bramley 2018JohannesburgRepublic of South AfricaJuanita Stiehler BritsTel: +27 11 786 5228Fax: +27 11 885 1693Email: [email protected]

DURBANHESTICO (PTy) LTDUnit 3, 5 Dudley StreetJacobs, 4052PO Box 12773DurbanRepublic of South AfricaMr Harald RannerTel: +27 31 467 0414Fax: +27 31 467 0410Email: [email protected]

CAPE TOWNHESTICO CAPE (PTy) LTDUnit 10, Freeway ParkCorner Berkerley & Upper Camp StreetPO Box 410, Maitland 7405Cape TownRepublic of South AfricaMr Jochem GreinerTel: + 27 21 510 8322Fax: + 27 21 511 4706Email: [email protected]

KENYAPOLyMATION EAABC Place, 3rd Floor,waiyaki waywestlands, NairobiKenyaTel: +254 204443621-24Fax: +254 2044436-25

TANZANIAPOLyMATION EAABC Place, 3rd Floor,waiyaki waywestlands, NairobiKenyaTel: +254 204443621-24Fax: +254 2044436-25

UGANDAPOLyMATION EAABC Place, 3rd Floor,waiyaki waywestlands, NairobiKenyaTel: +254 204443621-24Fax: +254 2044436-25

EITHIOPIAPOLyMATION EAABC Place, 3rd Floor,waiyaki waywestlands, NairobiKenyaTel: +254 204443621-24Fax: +254 2044436-25

Page 17: Product Guide Download

5yEARwARRANTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

ProduCt Guide Materials Conveying

overviewProvides all the benefits of a mini-central system with the added …

contactFind out where your nearest Maguire Partner is located …

model summaryView our full technical specification …

how it worksDetermine the number of receivers to be included in your system and confirm …

ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-MLS

north america

south america

europe

africa

asia

middle east

key to locations

Regional Head Offices

l Maguire Branches

l Maguire Partners

i

hEAd oFFicE

Maguire Asia15 Changi North Street 1#01-15, I-LoftsSingapore, 498765Tel: (+65) 6848-7117Fax: (+65) 6542-8577Email: [email protected]

www.maguire.com

MAguiRE oFFicES

BANGLADESH, CAMBODIA, MALAYSIA, MYANMAR, NEPAL, PAKISTAN & PHILIPPINESMAGUIRE PRODUCTS ASIA PTE LTD15 Changi North Street 1#01-15, I-LoftsSingapore 498765Contact: Mr Hubert NerlichManaging DirectorTel: +65 6848 7117 Ext 11Fax: +65 6542 8577Email: [email protected]: www.maguire.com

PARTnERS

AUSTRALIA & NEW ZEALANDFLEMING PLASTICS DyNAMICS PTy LTD.20/32 Roseberry StreetPO Box 638Balgowlah NSw 2093Tim Fleming - Managing DirectorTel: 1300 730 736Fax: 1300 730 739Email Contacts:New South wales: [email protected]: [email protected]: [email protected] Australia: [email protected] Australia: [email protected]: www.fleming.net.au

CHINAMAGUIRE PRODUCTS SHANGHAI CO LTD7-C02 Majesty Building138 Pu Dong AvenueShanghai 200120 People’s Republic of ChinaContact: Marshall GuoTel: +86 21 5882 3410Fax: +86 21 5882 3420 Email: [email protected]

MAGUIRE PRODUCTS SHANGHAI CO LTDRoom 1170,Century Tea TradeCenter A2, No.10 Maliandao,Xuanwu District, Beijing,100055People’s Republic of ChinaTel: +86 10 6332 2756Fax: +86 10 6332 2756Email: [email protected]

MAGUIRE PRODUCTS SHANGHAI CO LTDRoom 2706, Gao ya PavilionAthen GardenNo. 152 Lin He zhong RoadTianhe DistrictGuangzhou 510610People’s Republic of ChinaTel: +86 20 3893 4030 Fax: +86 20 3878 0166 Email: [email protected]

MAGUIRE PRODUCTS SHANGHAI CO LTDA-317, #3 BuildingNo.1388 Bin He Road Suzhou Jiangsu 215000People’s Republic of ChinaTel: 86-512-6802-0561 Fax: 86-512-6802-0562 Email: [email protected]

INDIAUNIMARKA-157, 3rd Cross1st Stage, Peenya Industrial EstateBENGALURU 560 058BangaloreIndiaContact: Mr y R Anand, PartnerTel: +91-80-2837-6044Fax: +91-80-2837-0614Email: [email protected]: www.unimark.in

UNIMARK201, Vikrant Industrial EstateOpposite Victory Flask, GovandiMumbai 400 088IndiaContact: Mr y R Anand, PartnerTel: +91 22 2550 6712Fax: +91 22 2550 6713Email: [email protected]: www.unimark.in

SRI LANKA API TRADES (PVT) LTD56 Dharmapala Mawatha Colombo 7 Sri Lanka Contact: Mr Anil Dissanayake Tel: +94 11 257 3028 Fax: +94 11 257 4178 Email: [email protected]

INDONESIAPT BILPLAST GRAPINDOApartmen Istana Harmoni Lt 1 Blok 2U Komplek Harmoni Plaza Jl Suryopranoto No 2 Jakarta Pusat 10130 Indonesia Contact: Mr Billy Tjang, Director Tel: +62-21-630-5835 Fax: +62-21-6386-0154 Email: [email protected]: www.bilplast.com

JAPANSANKO SHOJI LTDShin Shibakawa Bldg 4-11, 3-Chome, Doshomachi Chuo-Ku, Osaka 541-0045 Japan Contact: Mr yuichi Kimura, General ManagerTel: +81 6 6203 2831 Fax: +81 6 6227 1105 Email: [email protected]: www.sankojapan.co.jp

KOREAINNO TRADING COB-1202 Daewoo Techno Park 187-7 Dodang-dong wonmi-ku, Bucheon-shi, 420-806 Korea Contact: Mrs Jay ChoiGeneral ManagerTel: +82 32 670 8284 Fax: +82 32 670 8984 Email: [email protected]: www.innotrd.com

MALAYSIASINGAPORE HEAD OFFICE +NTL PLASTECHNo. 43 Jalan Apollo U5/190, Bandar Pinggiran Subang, Section U5,40150 Shah Alam, Selangor, MalaysiaContact: Mr wong Mun wai, Technical & Sales ManagerTel: +60 12 375 5599 Fax: +60 3 7781 4550 Email: [email protected]

NEW ZEALANDFLEMING PLASTICS DyNAMICS PTy LTD.20/32 Roseberry StreetPO Box 638Balgowlah NSw 2093Tim Fleming - Managing DirectorTel: 1300 730 736Fax: 1300 730 739Email Contacts:New South wales: [email protected]: [email protected]: [email protected] Australia: [email protected] Australia: [email protected]: www.fleming.net.au

PHILIPPINESSINGAPORE HEAD OFFICE +CRISwILL INTERNATIONAL TRADINGBroadway International Plaza 1232 United Nations Avenue Paco, Manila 1007 Philippines Contact: Mr wilson Lei, PresidentTel: +632 521 7334 / +632 526 3739Fax: +632 338 2669 / +632 536 8405Email: [email protected]: www.criswill.ph

TAIWANULTRACHEM CORPORATION2F, N0. Lane 1, Chung Cheng RoadPan Chiao City, Taipei 220TaiwanS. F. Houng - PresidentTel: 8862-896-5888-98Fax: 8862-299-6608-94Email: [email protected]

LUXURIANCE-TECH CO LTDNo 38, Lane 89, Sec 3 Taichung Port Rd Xitun District Taichung City 407 Taiwan Contact: Mr Lee wei-Chen, General ManagerTel: 886 4 2358 8038 Fax: 886 4 2358 7917 Email: [email protected]: www.luxuriance-tech.com.tw

THAILANDAUTOMATIC INDUSTRIAL TECHNOLOGy CO LTD1465 Moo 6, Karnchanapisek RoadBangkae-Nue, Bangkae Bangkok 10160 Thailand Contact: Mr Suweerawat Chairoj Managing Director Tel: +66 2 454 8708-10, Fax: +66 2 454 8711 Email: [email protected]: www.autoindtech.co.th

VIETNAMM-LEE INTERNATIONAL110 yen The Street, ward 2Tan Binh District, Ho Chi Minh CityVietnamContact: Mark L Murphy, DirectorTel: +84 8 3508 8820Fax: +84 8 3547 1988Mobile: 84 90 260 1928 Email: [email protected]: www.mleei.com

ASiA

x