Pressure, Level, Flow & Temperature - Switches, Sensors, Meters … · 2019-08-05 · Electronic Pressure Switches / Sensors 8 Pressure Sensors 9 Pressure Indicators Clogging Indicators

Pressure Level Flow Temperature

01892 664499

VALVES GAUGES

METERS ACCESSORIES

www.pvl.co.uk

SENSORSSWITCHES

The Super CatISSUE 3

ADHESIVES SEALANTS LUBRICANTS

TECHNICAL SPRAYSASSEMBLY PASTES

Over the past 25 years, Pressure Vacuum Level Ltd has grown into the leading UK

distributor for major manufacturers worldwide of switches, sensors, valves, meters, gauges

and handheld instruments for pressure, vacuum, level, flow and temperature applications. We also specialise in ATEX products and custom options manufactured to the customer’s specification.

We are always actively sourcing innovative products and updating our vast range to offer

the most cost effective, high quality solution to any problem an engineer may encounter.

View our latest products and entire range at:-

www.pvl.co.uk

Our qualified technical sales engineers are on call, to provide you with expert product advice, bespoke options and offer specific application problem solving.

Call Our Engineers Now:-

01892 664499

or Email:-

[email protected]

PVL are now the Official UK Distributor of Weicon Products.

Offering a Comprehensive Range of Adhesives, Sealents, Lubricants,

Technical Sprays and Assembly Pastes.

View our complete range at:-

www.pvldirect.co.uk

www.pvl.co.uk

Normally Open or Normally Closed Contacts (SPST)

Pressure Switches4

Change Over Contacts (SPDT) 5

Electronic Pressure Switches / Sensors 8

Pressure Sensors

9

Pressure IndicatorsClogging Indicators

Gauges

10

10

Vacuum Switches

Vacuum Switches

11

Normally Open / Normally Closed / Change Over Contacts

Plastic Float Switches

Level Switches12

Stainless Steel Float Switches 14Industrial Level Switches 16Custom Level Switches 17Float Level Switches 18

Transducers / Transmitters

11

Level Indicators & Gauges 18

Tilt Switches 19Limit Switches 20

Continous Level Sensors 20Flow Switches

Paddle Flow Switches 26Inline Paddle Flow Switches 28Piston Flow Switches 28

Flow Indicators 34

Flow Meters 35Temperature Switches

Fixed Temperature Switches 36Adjustable Temperature Switches 37

ValvesFloat Valves 40Solenoid Valves 41

Ball Valves 41

11Transducers / Transmitters

Vacuum Sensors

Level Indicators

Level Sensors

Flow Indicators

Flow Meters

AccessoriesCaps, DIN plugs and Connectors 46

Temperature Probes 38Temperature Sensors 39

Adhesives, Sealents, Sprays & LubricantsAdhesives, Sealents, Lubricants, Technical Sprays & Assembly Pastes 42

3

01892 664499

Pressure Switches

Normally Open or Normally Closed Contacts (SPST)

Model. 31

• Up to 50 bar adjustment ranges

• Over-pressures up to 300 bar• Max working pressures up to 150 bar • 1/4” BSP thread (others available)

• Viton seal (others available)

• ATEX option available

Model. 41Diaphragm Pressure Switch ≤ 48V

N/O or N/C Contacts




• Brass, steel or stainless steel body


Female Thread N/O or N/C Contacts


• Over-pressures up to 300 bar• Max working pressures up to 150 bar • 1/4” BSP female (others available)


• Brass, steel or stainless steel body

Model. 30Piston Pressure Switch ≤ 250V

N/O or N/C Contacts



• NBR+Teflon piston seal• Steel or stainless steel body


N/O or N/C Contacts



• NBR+Teflon piston seal• Steel or stainless steel body

Model. 25High Amp Pressure Switch ≤ 48V

N/O or N/C Contacts


• Max over-pressure 50 bar• Max working pressures up to 20 bar • 1/4” BSP thread (others available)

• NBR seal (others Available)

• Max current up to 5 amps

Diaphragm Pressure Switch ≤ 250VN/O or N/C Contacts

EUROSWITCH was established in 1978 in Sale Marasino (Brescia, Italy), originally designed and produced

level sensors, in the 1990s branched out into pressure switches and vacuum switches, throughout the nineties

the company extended it’s range considerably to include temperature switches, thermostats, flow meters, speed and rotation sensors. Euroswitch today are leaders in their field, with the focus on exceptional quality and good value for money products.

Euroswitch is second to none in engineering excellence and that is why PVL is proud to be their Offical UK Premium Partner.

Our partnership with Euroswitch allows us to offer bespoke configurations for OEMS, custom manufactured to exact specifications.

ATEX

OPTION

01892 6644994

www.pvl.co.uk

Pressure Switches

Change Over Contacts (SPDT)


SPDT C/O Contacts





Model. 681/682Pressure Switch with Visual Scale

SPST N/O Contacts


• Max over-pressure 20 bar• Switch rating 48V

• Air only• Electrical cable (Model. 681)• DIN43650 (Model. 682)


SPDT C/O Contacts



• NBR+Teflon piston seal• ATEX option available

Model. 24Pressure Switch ≤ 250V

SPDT C/O Contacts


• Over-pressures up to 800 bar• Max working pressures up to 450 bar • 1/4” BSP male/female thread options


• DIN43650 / cable options

Model. 27N/28NPressure Switch ≤ 250V

SPDT C/O Contacts



• Viton / NBR+Teflon Seal (Model 28N)• Adjustible Hysterisis (10-50%)

Model. 691/692Pressure Switch with Adjustment Knob

SPDT C/O Contacts


• Max over-pressure 900 bar• Up to ≤ 250V / DIN43650

• Manifold / 1/4” BSP female (ES-692)

• NBR+Teflon seal• ± 2% Tolerance across the range

Change Over Contacts (SPDT)Normally Closed Contact (N/C)Normally Open Contact (N/O)

ATEX

OPTIONATEX

OPTION

www.pvl.co.uk 5

01892 664499

Pressure Switches


B12

• 0.2 - 300 bar adjustment ranges

• Adjustable differential• Max working pressures up to 350 bar • 1/4” BSP thread

• Switch rating 415Vac/16A (6A ind)

• Snap action SPDT microswitch

901.6xUser Adjustable Low Pressure Switch

SPDT C/O Contacts

• 5 to 3000 mbar adjustment ranges

• Graduated knob for easy adjustment

• Ideal for low pressure applications

• 1/4” BSP thread (push on available)

• Nitrile seal (others available)


B01Large Adjustment Dial Pressure Switch

SPDT C/O Contacts

• 0.7 to 15 bar adjustment range

• Easy to set dial with locking ring

• Max working pressures up to 18 bar• 1⁄4” BSP female thread• 250Vac/10A res (2.5A ind)• All stainless steel wetted parts

DV7.1High Pressure Switch ≤ 250V

N/O or N/C Contacts


• Over-pressures up to 1200 bar• 1⁄4” BSP female thread• Switch body rotates 360 deg

• Nitrile Seal - Steel Body

• For Oil Use only.

DV7.2High Pressure Switch ≤ 48V

N/O or N/C Contacts


• Over-pressures up to 1200 bar• 2 x SPDT contacts - IP65

• 1/2” BSP standard thread

• Nitrile Seal - Aluminium Body

• For Oil Use only.

Pressure Switch With Scale

SPDT C/O Contacts

ATEX

OPTION

FC SeriesFlameproof EXd Pressure

SPDT/DPDT Switch


• SPDT or DPDT switching

• S/S 316 diaphragm (Others available)

• 1/4” BSP thread (Others available)

• 316 stainless steel wetted parts

• ATEX Exd IIC T6 level of Certification

ATEX

OPTION

Orion Instruments specialise in ATEX EXd Flame Proof switches, including pressure, vacuum and

temperature switches. In addition they offer many non-ATEX versions, ideal for harsh environments and unusual heavy duty applications.

All of Orion’s switches have a large range of options, including choice of diaphragms, such as Stainless Steel, Teflon, Monel and Titanium, threads including BSP and NPT usually with no minimum order quantities.

Call us now and speak to one of our engineers, who can advise you the best solution for your application from

our extensive range. View Orion’s full range here www.pvl.co.uk/orion

01892 6644996

www.pvl.co.uk

Pressure Switches


930.8xDifferential Pressure Switch

SPDT C/O Contacts

• Up to 25 mbar adjustment ranges

• Over-pressures up to 50 mbar• Graduated knob for easy adjustment

• 6.0 mm Ø push-on tube connection• Silicone diaphragm

• Ideal for very low pressure

901.8Differential Pressure Switch

SPDT C/O Contacts

• Up to 50 mbar adjustment ranges


• Up to 100 mbar over-pressure • 6.5mm Ø push-on tube connection• Nitrile, Viton, or EPDM diaphragm


MZ SeriesAdjustable Pressure Switch ≤ 250V

SPDT C/O Contacts


• Over-pressures up to 500 bar• Compact, rugged design

• Choice of threads and diaphragms

• Easy, safe wiring connections

• IP66 as standard

MD SeriesDifferential Pressure Switch

SPDT C/O contacts

• Low Ranges of 1.5 - 350 mBar • High Ranges up to 25 Bar

• Clear Adjustment Scale

• 2 x 1/4” BSP Standard Female Ports• 250 VAC/15A (optional gold contacts)

• IP66 as standard

705-010Differential Pressure Switch

SPDT C/O contacts

• 0.3 to 2 bar adjustment range

• Over-pressures up to 10 bar• Switch Rating 250Vac/2A

• 2 x 1/8” BSP Standard Female Ports• For use with air, oil or water.• Easy to adjust with allen key

DSDual High Range

2 in 1 Dual Switch


• 2 SPDT C/O microswitches

• 2 Independent switch points

• 1/4” BSP thread (Others available)

• SS 316,Teflon or Neoprene diaphragm• IP66 enclosure

ATEX

OPTION

Can’t find what you are looking for?Call us now and speak to one of our

engineers to discuss your requirements.

01892 664499

www.pvl.co.uk 7

01892 664499

Pressure Switches

Electronic Pressure Switches / Sensors

3600Electronic Solid State

Pressure Switch


• Proof pressures up to 2.5x Full Scale

• Din, M12 or Deutsch connections

• 1/4” BSP thread (others available)

• Set point or time delay configurable• No moving parts

E30Digital Pressure Switch

SPDT C/O Contacts

• 20 Bar / 290 PSI pressure rating

• Multi voltage operation

• Powerful 40 Amp solid state drive

• 30 Amp primary pump relay

• Dedicated 16 amp alarm relay

• IP67 rated

PSD30Electronic Pressure Switch

with display

• Up to 600 bar pressure range

• Over-pressures up to 1200 bar• PNP, 4-20 mA or 0-10 V DC


• IP67 rated

• Stainless steel body

Omni P1Pressure Transducer System

with Switch Points

• Up to 400 bar measurement range

• Over-pressures up to 600 bar• Analog output, two switching outputs

• 1/2” BSP thread

• Back Lit LCD display• Easily adjustable

Flex P1Pressure Transducer

With Switch


• Over-pressures up to 600 bar• 4-20 mA or 0-10 V DC• 1/2” BSP thread

• IP67 Rated

• Switching output and/or analog output

TDEPSElectronic Pressure Switch

with Relay Output


• Up to 2x over-pressure• High or low current, relay output


• Custom ranges & ouputs available

• Set point & hysteresis configurable

01892 664499

For over 50 years, Beck have been offering high quality pressure monitoring solutions. They have become the the leading name in products for ventilation and air conditioning products.

These applications usually operate at very low pressure levels, and Beck’s range is specifically designed to work at these low ranges.

Call PVL now to discuss your requirements for very low pressure, differential pressure or vacuum applications.

8

www.pvl.co.uk

Pressure Sensors

Transducers / Transmitters

3100 SeriesCompact OEM Pressure

Transmitters & Transducers


• Proof pressures up to 3x Full Scale

• Din or M12 electrical(others available)


• 0-10v or 4-20mA (others available)

• All stainless steel wetted parts

DMP 331PFlush Welded Diaphragm

Hygenic Transducer

• 0 - 100 mbar up to 0 - 40 bar

• Up to 0.25% accuracy• Threaded, clamp or dairy connection

• Din,M12 or cable electrical connection

• Medium 125°c (300°c option)


984Differential Pressure

Transmitter for Air

• Up to 250 kPa pressure ranges

• Manual/automated offset compensation

• 4-20 mA or 0-10 V DC output

• 6.0 mm Ø push-on tube connection• mbar or pascal pressure units

• Optional LED display

EDP1Differential Pressure Transmitter

for High Pressure


• Over-pressures up to 280 bar• 4-20 mA Outputs

• 2 x 1/8” BSP ports• M12 plug connection


Unicon PProgrammable

Pressure Converter

• Up to 2000 mbar measurement range

• Max over-pressure 4000 mbar• 4-20 mA Outputs

• 4 mm pressure tube connection

• Programming via front side keypad

• For dry and non aggressive gases

P2000ALWATEX Industrial

Pressure Transmitter


• Over-pressures up to 1200 bar• 4-20 mA with HART outputs

• -40°c to 120°c process temperatures

• IP67 rated

• ATEX Exd / Exia certified

ATEX

OPTION

ATEX

OPTION

www.pvl.co.uk

Need more detailed specifications?Full datasheets for all products on our website.

www.pvl.co.uk

9

01892 664499

Model. 82Electrical Clogging Indicator

with Rotating System


• Max working pressures up to 450 bar • 1/2” BSP thread (others available)

• Working fluid - oil• With rotating system• Brass body

Model. 86Optical Differential Pressure

Clogging Indicator


• Max working pressures up to 450 bar • M20 x 1.5 thread (others available)• Working fluid - oil• Visual indicator

• Brass body

Model. 80Differential Pressure

Clogging Indicator


• Max working pressures up to 450 bar • 1/2” BSP thread (others available)

• Working fluid - oil• DIN43650 (ES81)• Brass body

Pressure Indicators

Clogging Indicators / Gauges

Pressure Gauges Top, Bottom & Back Entry

Range of Gauges

• Ranges of up to 1000 bar• 1/8”, 1/4”, 1/2” fittings• Ø 40, 50, 63, 100mm & 150mm case • Stainless steel options

• Top, bottom & rear entry options

• Accurate measurement

Pressure Gauge SwitchPressure Gauge with

Switch Contacts


• 1/2” BSP fittings• 100mm or 150mm diameter

• Electrical switch contacts

• Surface, inserted & inductive options

• One / two contact options

Digital Pressure GaugesRange of Digital

Pressure Gauges

• Ranges up to 2800 bar• Wide Range of Measurement Units

• 1/4NPT, 1/4BSP male, M20×1.5 male • Stainless steel wetted parts

• Battery operated (mains option)

• ATEX options available

ATEX

OPTION

01892 664499

Need a rubber boot, plug or cable?See our range of accessories on page 42.

10

www.pvl.co.uk

Vacuum

Switches / Sensors

MZ SeriesVacuum Switch

SPDT Snap action

• Ranges of 760 mmHg to 100 mmHg

• Externally visible scale• Reliable accurate micro switches


• Robust IP66 enclosure

• Accuracy +/-2% FSR

FC SeriesATEX Vacuum

SPDT/DPDT Switch

• Working pressure up to 12 bar• SPDT or DPDT switching

• Reliable, accurate micro switches


• 316 stainless steel wetted parts

• ATEX Exd IIC T6 level of certification

901.7xAdjustable Vacuum Switch

SPDT CO Contacts

• -5 to -700 mbar adjustment ranges


• Up to 4 bar over-pressure


• Nitrile diaphragm (others available)


TDH 41High Accuracy

Vacuum Transducer

• Vacuum - 6 bar measurement range

• 3 x full scale burst pressure• Voltage and current output models


• 9.4 Mini Din electrical connector• 0.4% accuracy

Model. 38Vacuum Switch ≤ 250V

SPDT CO Contacts

• -200 / - 900 mbar adjustment ranges


• NBR seal or CR seal

• Brass body

Model. 3xVacuum Switch ≤ 250V

NO or NC Contacts

• -200 / -900 mbar adjustment range


• NBR seal or CR seal


ATEX

OPTIONATEX

OPTION

ATEX

OPTION

www.pvl.co.uk

Buy Products Direct from Our Online Shop.

www.pvldirect.co.ukpvldirect

11

01892 664499

MFS25-JTop Entry

Float Switch

• Unsinkable Polypropylene float• Max Pressure 3 bar• Polypropylene stem with 30cm leads

• N/O & N/C contacts (reversible float)• Level switch has M8 thread with nut

• 220Vac/66VA

Level Switches

MFS23-FTop Entry

Float Switch

• Unsinkable Polypropylene float• Max Pressure 3 bar• Polypropylene stem with 30cm leads

• Make on rise contact (not reversible)

• M10 thread with nut

• 220Vac/66VA

MFS17-ATop Entry

Float Switch

• Nitrile foamed float 20mm Ø• Max Pressure 15 bar• Polyacetal top entry stem level switch

• Close on fall contact

• 1/8” BSP thread with nut

• 220Vac/66VA

MFS9 N1/N2Side Entry Internal

Float Switch

• Polypropylene body & float (N1)• Nylon body & float (N2)• Internal side entry entry fitting• 1/4” BSP thread with nut

• N/O or N/C (reversible) contact

• 220Vac/50VA reed switch

• Max Temperature 110 °C

MFS21-KSide Entry Internal

Float Switch

• Polypropylene float & body• Max Pressure 3 bar• Polyacetal side entry stem level switch



• 220Vac/66VA


Side Entry ExternalFloat Switch

• Polypropylene Body & Float (N1)• Nylon Body & Float (N2)• External side entry fitting level switch• 1/2” BSPT (NPT tapered) thread


• 220Vac/50VA reed switch


MFS10 N1/N2


RIKO Float Technology Co. Ltd established in 1965, have been one of the world’s leading manufacturers of plastic and stainless steel floats and float swtiches. Incredibly robust and reliable, Riko switches are the trusted choice for OEMs, system builders and the indivdual engineer alike.

PVL has been in partnership with Riko for the last 25 years and is the official reseller, distributing direct to the UK, Europe and worldwide.

We always hold stock of Riko products for next day delivery, there is no minimum order quantity and offer sizable discounts on quantity orders.

01892 66449912

www.pvl.co.uk

MFS17-BTop Entry

Float Switch

• Nitrile foamed float 26mm Ø• Max Pressure 15 bar• Polyacetal top entry stem level switch

• N/O or N/C contacts (reversible float)• 1/8” BSP thread with nut

• 220Vac/66VA

L SeriesSide Entry External

Float Switch

• Stainless steel or Thermoplastic

• Built in Manual Override

• 500V/15A S.P.D.T switch • 3/4” or 1” BSP

• Weatherproof IP67 housing

• Simple to Install/ Fully Serviceable

• Max pressure 10 bar

MFS17-C & DTop Entry Float Switch

• Polypropylene foamed float 25mm Ø• Max Pressure 3 bar• Polyprop. top entry stem level switch• N/O or N/C (reversible) contact


• 220Vac/66VA

MFS21-ESide Entry Internal

Float Switch

• Nitrile float• Max Pressure 15 bar• Polyacetal side entry stem level switch



• 220Vac/66VA

P520 P/NSide Entry External

Float Switch

• Polypropylene Body & Float (P)• Nylon Body & Float (N)• External side entry fitting level switch• Compression Fitting

• 21.5mm Entry Diameter• N/O or N/C (SPDT Option Available)

• 50Vac/1A reed switch

Side Entry ExternalFloat Switch

• Polypropylene / Nylon Parts

• External side entry fitting level switch• Compression Fitting

• 16mm Entry Diameter

• N/O or N/C (SPDT Option Available)



P540

Level Switches


www.pvl.co.uk


www.pvl.co.uk

13

01892 664499

RFS-2BTop Entry

Float Switch

• 316 grade stainless steel stem

• Nitrile(Buna-N) float• 120°C maximum temperature• N/O or N/C (reversible) contact


• Level switch rated at 220Vac/50VA

Top Entry

Float Switch

• All 316 grade stainless steel

• Side entry applications

• 120ºC maximum temperature• N/O or N/C (reversible) contact


• 220Vac/50VA

Top Entry

Float Switch

• High temperatures up to 200°C

• Pressures up to 10 bar




• 220Vac/50VA

RFS-9Top Entry

Float Switch



• 120°C maximum temperature• N/O or N/C (reversible) contact


• 220Vac/50VA

RFS-2Top Entry

Float Switch

• 316 grade stainless steel level switch


• 120ºC maximum temperature• N/O or N/C (reversible) contact


• 220Vac/50VA

RFS-8Top Entry

Float Switch



• 120°C maximum temperature• N/O or N/C (reversible) contact


• 220Vac/50VA

RFS-6 RFS-4

Level Switches

Stainless Steel Float Switches

01892 664499

Hadro Techniek established in 1993, in the Netherlands, manufacture high quailty custom magnetic level

gauges.

Each level indicator is tailor made to the customer requirements, in a choice of materials, threaded or

flanged connection options. They are also available with switches and/or analog outputs such as 4-20mA and can be constructed to nearly any length required.

All the magnetic level indicators have the option of ATEX approval, if required, and now this year they are

also available with IECEx approval.

14

www.pvl.co.uk

RFS-12PBest Selling Side Entry

Float Switch


construction

• Strong hinge pin and up to 5 bar

pressure

• 1/2” BSPT external fitting level switch• 220Vac/50VA

RFS-13Worlds Smallest Side Entry

Float Switch

• Only 55mm protusion into tank

• Standard 1/8” BSP thread 15mm long

• 304 grade stainless steel construction

• Float SG = 0.80 +/-0.05• Up to 120 C temperature & 5 bar

• 24Vdc/0.1A max

Internal Side Entry

Float Switch


• Strong hinge pin and up to 5 bar

pressure

• 1/8” BSP internal fitting option• N/O or N/C (reversible) contact

• 220Vac/50VA

RFS-11H Internal Side Entry

Float Switch


• Hinge pin and up to 5 bar pressure

• 1/8” BSP internal fitting or 1/2” external fitting options


• 220Vac/50VA

NW3 / MW3External Side Entry

Float Switch

• 250Vac/5A Microswitch


• SPDT C/O Microswitch

• Brass or Stainless steel body

• Spansil (Buna) or stainless steel float• Protected to IP65 with standard DIN

RFS-11A

P531External Side Entry

Float Switch

• Brass / Polypropylene & Nylon Parts

• 3/4” BSP Brass Thread

• 19mm Entry Diameter

• N/O or N/C (SPDT Option Available)


• Standard DIN (DIN43650)

Level Switches

Stainless Steel Float Switches

www.pvl.co.uk



01892 664499

15

01892 664499

EMCO-916/917Stainless Side/Top Entry

Pneumatic Level Switch

• All Stainless Steel Level switch

• Horizontally or Vertically Mounted

• Up to 100 bar maximum pressure• Min Specific gravity 0.7 optional 0.5• Flanged fitting, compatible with

Mobrey Type A

Fig. 572

ATEX Vertical

Level Switch

• Up to 6 switch points

• Up to 6m length.• Maximum working pressure 50 bar• Standard working temperature 100°C

• Executions up to 160°C on request• ATEX approved

Top Mounted

Float Switch

• For tanks up to 3,000mm deep

• Variable hysteresis adjustment

• Standard flange (bolt holes Ø 13 mm and BCD Ø 92 mm)

• Wetted parts in stainless steel AISI

316

Vertical Pneumatic

Level Switch

• Instant Open and Close

• Fully Mechanical operation

• Max and Min level adjustment.• Fully Stainless Steel (AISI-316).• Fixing thread 1” or coupling connection• Tubular air connections 1/8”x 8 mm.

EMCO-03 Level S-MultipointSide Mounted

Level Switch

• Side mounting – Stainless steel

• Up to 6 switch points

• Maximum working pressure 50 bar• Standard working temperature 105°C

• Executions up to 180°C on request• ATEX approved

LS-Multipoint

Industrial Side Entry

Float Switch

• All Stainless Steel Level switch

• Horizontally or Vertically Mounted

• Up to 100 bar maximum pressure• Min Specific gravity 0.7 optional 0.5• Flanged fitting, compatible with

Mobrey Type A

Fig. 576

Level Switches

Industrial Level Switches

ATEX

OPTION

ATEX

OPTION

01892 664499

Need a custom level switch? PVL specialise in bespoke options with no minimum order quantities.

Every option is configurable for your individual requirements.

Choose from plastic, brass or stainless steel, select single or mulitple switch points and levels. Threaded or flanged connections. Top or side entry. Flying leads, terminal head or DIN plug connectors. Option of a integral temperature switch or ATEX approval.

We offer only the highest quality, with the shortest lead times and at the best possible prices.

16

www.pvl.co.uk

BS Custom LevelMutilple Brass Level Switch Options

to Custom Specifications

• 1 to 6 switch points

• Up to 6m length.• Up to 20 bar max working pressure• Working temperature Up to 105°C

• IP65 Rated

• ATEX Options Available

Top Entry Modular

Level Switch

IMM

• Adjustable level from 180 -560 mm

• External magnet suitable for ferrous particles.

• Working temperature Up to 100°C

• NO/NC or SPDT Reed Switch

• Flange and 1” BSP connection in One

Top Entry Modular

Float Switch

• Nylon or NBR Float

• Adjustable length to 1000 mm


• Temperature Switch Option (PKT)• IP65 with Din Connector

• Flange or 1” BSP Options

PK/PKT

Mutilple Stainless Steel Level Switch

Options to Custom Specifications


• Up to 6m length.• Up to 50 bar max working pressure• Working temperature Up to 105°C

• IP65 Rated


Mutilple All Plastic Level Switch

Options to Custom Specifications


• Up to 5m length.• Up to 6 bar max working pressure• Working temperature Up to 130°C• IP65 Rated


Top Entry ATEX

Float Switch

IMx

• Stainless Steel Wetted Parts

• 100mm to 500mm Options


• High Temperature Option Available

• IP65 with Din Connector

• ATEX approved

SS Custom Level PS Custom Level

Level Switches

Custom Level Switches

ATEX

OPTION

ATEX

OPTIONATEX

OPTION

ATEX

OPTION

www.pvl.co.uk


www.pvl.co.uk

17

01892 664499

NBS IndicatorMechanical Float Indicator

for Fluid Media Top Mounted

• Vertical Mounted in the Cover

• NBR Float

• 40 - 300mm Length Options

• Level displayed directly in sight glass

• 3/8” BSP or 1/2” BSP Thread

• ≥ 0.60 - ≥ 0.80 g/cm3 Density

Mechanical Magnetic

Level Gauges

• Shocks,Vibrations,Temperature Resistant

• Fully mechanical no power neccessary

• Stainless,Aluminium or Plastic options

• Fully adjustable switching options

• 4-20 mA output options


Custom Level Gauges

WV001Electronic Level Switch

• Hi/ Lo 2 Position Synthetic Resin Floats

• 2 Contacts 1x NO / 1x NC• 1 Metre Cable

• Single Phase

• 110- 220V Voltage

• 2 HP - 15 A Current

D30 Corrosion Resistant

Level Switch

• Fully Adjustable two position switching

• No metal parts in contact with fluids• Resistant to Acids,Chemicals,Seawater

• 2HP rated 20 Amp SPDT switch

• Suits Slurrys & High Solids Applications

• Robust construction

NA IndicatorMechanical Flow Indicator

for Fluid Media Side Mounted

• Vertical Side Mounted

• No Moving Parts




• ≥ 0.01 g/cm3 Density

NB IndicatorMechanical Flow Indicator

for Fluid Media Top Mounted

• Vertical Mounted in the Cover

• No Moving Parts




• ≥ 0.01 g/cm3 Density

01892 664499

Level Switches / Gauges

Float Level Switches / Level Indicators / Magnetic Level Gauges

ATEX

OPTION

Based in France, ATMI have been manufacturing omni-directional float level switches for over 40 years. Their range includes over 50 different versions from 20 models for liquid level detection and regulation. In addition they offer tilt switches for solids, options for ATEX and drinking water applications.

Cost effective, high quality construction with the required precision, PVL is proud to represent ATMI in the UK.

Call our engineers now to discuss your requirements.

18

www.pvl.co.uk

SOBAFloat Switch for

Multiple Pumps

• Omni Directionnal Operation

• Switching angle+/- 25º

• Maximum pressure 3.5 bar• Allowed Fluid Density 0.70 to 1.15 • 16A resistive - 6A inductive

• 5, 6, 10, 13, 15, 20 and 25 m Options

TUBANarrow Access

Float Level Switch

SOBA EXATEX

Float Switch



• Maximum pressure 4 bar• Allowed Fluid Density 0.70 to 1.15 • 16A resistive - 6A inductive

• 5, 10, 13, 15, 20, 25 and 30m Options

ATEX Tilt Level

Switch For Solids

SOLIBA EXTilt Level Switch

For Solids

SOLIBA

BIP STOPFloat Switch for

Individual Pumps




• 1, 3, 5, 10 and 20m Options




• 2, 3, 5, 10 and 20m Options

• Tilting Operation


• Temperature -40º to 85ºC

• Bulk Solids High Level Measurement

• 20A resistive - 8A inductive

• 5, 6, 13, 15, 20 and 30m Options

• Tilting Operation


• Temperature -20º to 70ºC

• Bulk Solids High Level Measurement

• 10A resistive - 4A inductive

• 5, 10, 15, 20, 25 and 30m Options

www.pvl.co.uk

Float Level Switches

Float Level Switches / Tilt Level Switches

ATEX

OPTION

ATEX

OPTION



01892 664499

19

01892 664499

CLS-23Miniature Capacitive

Limit Level Sensors

RFLS-35High Frequency

Limit Level Sensor

• Limit Level Sensor for Viscous Liquids

• Resistant to Adhesion of Sticky Media

• Conductive / Non-Conductive Fluids


• Media Recognition Settings

• Highly Sensitive and Reliable

DLS-27Capacitive

Limit Level Sensors

• Limit Level Sensor for Powder/Liquids

• Conductive / Non-Conductive Options

• Suitable for High Temperatures

• 3/4” BSP thread (Others Available)

• Adjustable Sensitivy and Hysteresis

• ATEX versions available

CLS-53NCapacitive

Level Switch for Solids

• Level Sensing of Bulk Solid Materials

• Pellets, Wood Chips, Grains, Cereals

• 2 or 3 Wire Outputs Options

• 1 1/2” BSP thread

• Adjustable Sensitivy

• IP65 Protection

CPS-24Capacitive Proximity

Switch

• Detect liquids in glass or plastic pipes

• Position or Proximity Detection• 0-10mm Sensing Distance

• 24mm Thread Type

• Adjustable Sensitivy


Submersible

Level Sensor

• Level Detection for Wells / Boreholes

• Maximum Immersion Depth 100m• 2 Wire Output to Relay or Control Unit

• 2m Cable (Longer Available)

• Stainless Steel Removable Basket

• IP68 Protection

CLS-23S

• Limit Level Sensor for Various Liquids

• Conductive / Non-Conductive Fluids

• Suitable for High Temperatures

• 1/2” BSP thread (Others Available)

• Easily Adjustable Sensitivy


01892 664499

ATEX

OPTION

ATEX

OPTION

ATEX

OPTION

ATEX

OPTION

ATEX

OPTION

Limit Switches / Continous Level Sensors

Level Sensors

Dinel S.R.O established in 1995, in the Czech Republic, started out specialising in capacitive level

sensors, and has now grown to become one of the leading names in level sensors.

Dinel offer a wide selection of measuring technolgies, including capacitive, conductive, radar and

ultrasonic for almost any level measuring application.

Offering incredibly cost effective options with exceptional build quality, PVL is proud to be Dinel’s offical distributor in the UK.

20

www.pvl.co.uk

GPLS-25Through Wall

Level Switches

• Level Sensing through 8mm Glass/Plastic

• 2 or 3 Wire Connections

• Simple Setup in Miniature Form Switch

• Max Switching Current 40mA(PNP 100mA)• Temperature range of -20 to 80 °C

• IP67 Rated

Level Controller and

Conductivity Probes

• Able to control 2 levels emptying/ filling• Din mounting control with manual reset

• Up to 80°C Temperature

• Max working pressures up to 35 bar • 3/8” BSP thread

• 24Vac, 110Vac or 230Vac Supply

Point Level and

Overfill Solution

• For Any Tank Type or Size

• Polluting, Corrosive or Expensive Liquids• Very Durable with Outstanding Reliabilty

• Easy 2 Wire Terminal to Transducer

• Up to 25 Bar Pressure & 80°C Temp.• 316Ti Stainless Steel Wetted Parts

BediaCapacitance Level

Monitoring Probe

• Oil & water sensing options

• Over-pressures up to 300 bar• Max working pressures up to 25 bar • 9 - 36Vdc supply range

• Choice of Threads

• IP67 Protection

FLD-48Flexible

Level Sensor

• Self Adhesive on Curved Surface

• Level Sensing through 8mm Glass/Plastic

• Fixing on Min. 200mm Vessel Diameter • 2 Wire Max. 40 mA Output• Temperature range of -10 to 60 °C

• IP67 Rated

CNP-18Conductive Probe

Level Sensors

• Direct Level Detection in Liquids

• 40 bar Max Pressure at 25°C• For Use with CDSU relay

• M18x1.5 Process Connection• Up to 130°C Max. Temperature• Stainless Steel Probe & Housing

LS300 / LS500 AO3 & EA

www.pvl.co.uk

ATEX

OPTION

Level Sensors / Probes

Level Sensors


www.pvl.co.uk

21

01892 664499

FLEXI Level Capacitance

Probe and Controller

• Continuous level control flexible probe• Suitable for water, oil or acids

• 4 - 20mA output

• 4 x adjustable switch-points• No moving parts

• Models for tanks up to 3m deep.

E Series / P4Level Conductivity

Probes and Controller

• Up to 5 x 3 metre long electrodes• Polypropylene electrode holder

• Atmospheric pressure and 60° max • Threaded or flanged options• DIN rail mounted controller

• Able to control 2 x levels or alarms

LABOLevel Sensor

with Switch

• Electronic switch in 12 mm housing

• Suitable for fluids and fine granulates• Programmable hysteresis

• Suitable for very variable fluids• Programmable power on/off delays

• Very simple to use

LVLVibrating Fork

Level Sensor

• Detects by vibration frequency change


• 1” BSP standard thread

• Ideal for use with most liquids

• 18 - 30Vdc supply

• PNP switching

LCC1Capacitive

Level Sensor

• For oil level detection in crankcases

• Ideal for difficult turbulent applications• Switch output and 4..20 mA output• 0...10 V output option • Temperature control option

• Compact size with flange connection

Thermal OverfillSolution

• Level detector and transducer

• Ideal for polluitng liquids

• No moving parts

• Maintenance free

• 100mm to 3000mm length options

• 3⁄4“ BSP thread (others available)

76A / NB 220

01892 664499

Limit Switches / Continuous Level Sensors

ATEX

OPTION

Level Sensors

FAFNIR GmbH was founded in Hamburg, Germany in 1965 and designs and manufactures sensors and

control systems for process automation market. The first product designed and manufactured by FAFNIR was an oil burner. This was followed by a safety device to prevent the overfilling of tanks and process tanks; an innovation that set the trend for future FAFNIR products.

FAFNIR today is known worldwide for the design and manufacture of high precision level measurement

devices for the petroleum, pharmaceutical, chemical and food industries.

PVL is the offical UK distributor of Fafnir products.

22

www.pvl.co.uk

VECTISFloat Lever Arm

Level sensor

• Analog hall effect sensor

• Analog/switching/frequency output

• 80mm to 500mm arm lengths

• 3 Hole flange fitting• For water, oil, petrol

• Small compact construction

Potentiometric

Level Sensor

• For sticky or dirty Liquids

• 2 Wire 4-20mA output

• Measure filling level / separation layer• 100mm to 6000m length options

• IP68 Rating


Continuous Level

Float Sensor

• Level Sensor with reed chain


• 4 to 20mA, 0-10v or resistive output

• 1”, 1” 1/2 or 2” BSP thread choices

• Up to 10mm resolution

• Brass, or stainless steel versions

UNICONCapacitive Level

Sensor and Gauge

• Measuring ranges programmable


• For conductive liquids, acids or lyes

• 2 electronic alarm outputs

• 20mm to 2500mm probe Options

• IP65 Rated

TORRIX Magnetostrictive

Level Sensor

• Highly accurate and precise



• Shock and vibration proof

• Maintenance free


Flex-LCLevel Switch and

Transmitter

• Level Sensor with Reed chain

• Analog output/switching output


• Very simple installation

• Various materials available

• Optional temperature sensor

LC HM/HK CONDURIX

www.pvl.co.uk

ATEX

OPTION

ATEX

OPTION

Level Sensors / Probes

Level Sensors



01892 664499

23

01892 664499

B1-6Resistive Fuel

Level Sensor

• Unleaded, diesel or bio fuel

• 152mm to 684mm sensor lengths

• 6 Screw (ø60, 3mm) connection

• Top mounting

• NBR70 O-ring

• Aluminium body

CLM-40Capacitive

Level Sensor

• Direct tank mounting with flange• Electrode length from 0.1 m to 1 m• 4-20 mA or 0-10 V output

• Easy Install with no settings required

• IP68 rating

• Housing & rod stainless steel

B2-6Fixation Fuel Level

Sensor with Fuel Lines

• Unleaded, diesel or bio fuel

• 152mm to 684mm sensor lengths

• 6 Screw (ø60, 3mm) connection

• Top mounting with fuel line

• NBR70 O-ring

• Aluminium body

T/LL 130Fuel Level

Sensors

• For Water, coolant or fuel/oil

• 200mm to 1000mm probe lengths

• No moving parts

• Resistive or voltage output

• Stainless steel 316 sensor

• IP67 rated

Laser Level and

Distance Sensor

• 0.1m to 40m or 100m Range• 4-20mA Output

• 2 x Programmable Relays • Virtually No Dead Zone

• Non Contact Level Measurement

• ATEX approved

Guided Radar

Level Meter

• Radar level meter with guided wave

• 4 ... 20 mA, HART® output• Liquid, mush & bulk-solid materials

• Suitable with aggressive liquids

• Measuring range up to 40m


GRLM-70 AL40/100

01892 664499

Level Sensors

Fuel Sensors / Radar / Laser

ATEX

OPTION

ATEX

OPTION

Need a power supply or intrinsically safe barrier?See our range of accessories on page 42.

24

www.pvl.co.uk

ULM-53Ultrasonic Continous

Level Meters

• Non Contact Level Measurement

• Current, Voltage or Modbus Outputs

• Easy Adjustment and Setup

• Various Threads and Flange Options

• Up to 20M Measurement Range


ULM-70Ultrasonic Continous

Level Meters

• LED with Modifiable Display Units• Current, Voltage or Modbus Outputs

• D Logic Signal Processing

• Various Threads and Flange Options

• Up to 20M Measurement Range


Omni LUltrasonic Level

Transmitter with Switch

• Measure level or distance with Display

• Analog Output, 2 Swtiching Outputs

• 3 Hole Flange Process Fitting

• Modifiable Units in the Display• M12 x 1.5 Electrical Connection• IP67 Rating

IL10Hydrostatic Level

Transmitter

• 2 Wire 4 to 20mA Output

• 0.5 % Accuracy• Immersion Depth Up to 300m

• 0.1 to 25 Bar Measuring Range• Fully Stainless Steel IP68

• ATEX Approved

LS10Hydrostatic Level

Sensors

• 2 Wire 4 to 20mA Output

• 0.5 % Accuracy Optional 0.25 %• Immersion Depth Up to 100m

• 100 mbar to 10 bar Relative Range

• Custom Length of Cable

• IP68 Rated

HLM-25 Hydrostatic Level Meter

For Drinking Water

• 4 to 20mA or 0-10V Output

• 0.5 % Accuracy• Immersion Depth Up to 100m

• 10cm Step Configurations• Fully Stainless Steel

• Over Voltage Protection

www.pvl.co.uk

Level Sensors

Ultrasonic / Hydrostatic

ATEX

OPTION

ATEX

OPTIONATEX

OPTION


www.pvl.co.uk

25

01892 664499

CRG / CREPaddle Type

Flow Switch

• 4 x paddle supplied with each switch• Pipe sizes from 1” to 6” diameter.• Standard 1” BSP fitting• 0.19 to 39.90 m³/h switching ranges• Brass or stainless steel body

• C/O Microswitch Rated 250Vac/15A

CM2KPaddle Type

Flow Switch

• 4 x paddles supplied with each switch• Pipe sizes from 25mm to 200mm

• 1”BSP threaded pipe fitting• Brass or stainless steel option

• 0.9 - 6.7 m3/h H2O switching range• C/O Microswitch Rated 250Vac/5A

Trailing Wire

Flow Switch

• Suites Open channels or Pipework

• 0 to 500V AC 15 Amp S.P.D.T switch• Works when solids or slurry is present

• Weatherproof IP67 housing

• Perfect for high velocity flow• ¾” & 1” BSP models available

TW Series

Insertion Paddle Switches

01892 664499

F20 / 21Heavy Duty Paddle

Flow Swtich

• Stainless & polypropylene models

• 0 to 500VAC 15amp S.P.D.T Switch• Manual override built in

• 200 bar pressure rating

• 3/4” & 1” BSP models available

• Suitable for sea water, acids & akalis

Corrosion Proof

Paddle Flow Swtich

• All wetted parts in thermo plastic

• No metal parts in contacts with fluids• Fully adjustable flow sensitivity• Suits pipe sizes 25mm to 150mm +

• 18 Bar (260 PSI) pressure rating

• Reed switch or solid state output

F25

Programmable

Flow Switch

• Suite pipes 1″ and larger• Multi voltage operation

• Powerful 40 amp solid state drive

• 10 programmable timers built in

• 20 bar pressure rating

• Reed switch or solid state output

F29

Flow

Established in 1974, Kelco Engineering operates from two large well equipped factories in Australia.

Kelco are specialist manufacturers of corrosion resistant flow switches, level switches, and float switches.

The majority of their switches have no metal parts in contact with process fluids. This feature allows them to be used reliably in aggressive liquids such as acids and alkalis, sea water and saline ground water.

View Kelco’s entire range on our website www.pvl.co.uk/kelco

26

www.pvl.co.uk

TZ1 EMechanical Flow

Meter with Display

• 40 to 100mm nominal width

• 50 to 1050 l/min measuring range

• For fluid or gaseous media• Large analog display

• Simple adjustment using gauge

• Brass or stainless steel options

UB1Paddle

Flow Switch

• Nominal pipe sizes up to 200mm

• 1.2 - 34 m3/h switching range• Transparent cover to view operation

• 1” BSP thread / flange options• Silver or gold contacts options

• Suitable for media with ferric particles

Insertion Paddle Switches

www.pvl.co.uk

VM EMPaddle

Flow Switch

• 40 to 200mm nominal width

• 40 to 1050 l/min switching range

• -20-+90 °C (-20-+200 °C option VMX)

• Flange process connection DIN 2527

• Precise stepless adjustment


UR1 V/H/PPaddle

Flow Switch


• 5 - 174 l/min switching range

• Brass / stainless steel / plastic options

• Welded or 1/2” BSP connection

• Low pressure loss


YRPaddle Flow Switch

for Air

• 1-8 m/s switching range

• Not dependent on nomimal width

• For gas or air only

• Flat plate flange 89 x 63.5mm• IP65 rated


UM3K VPaddle

Flow Switch



• Welded connection (others available)


• Brass or stainless steel wetted parts


ATEX

OPTION

ATEX

OPTION

Flow

Buy Products Direct from Our Online Shop.

www.pvldirect.co.ukpvldirect

27

01892 664499

UZ MInline Paddle Type

Flow Meter with Optional Switch

• Nominal pipe sizes 15-50 mm

• 2 - 500 l/min measuring range

• 1/2” - 2” BSP threaded connections

• Suitable for ferric particles and dirt

• Brass or stainless steel option

• With flow rate guage

UR1/ UR2 G/AInline Paddle

Flow Switch


• 1.3 - 35 l/min switching range• 3/8” - 2” BSP threaded connections


• Brass stainless steel or plastic option


UR3K G/A





• C/O reed switch rated at 230Vac/1A

UM3K G/A






• C/O micro switch rated at 250Vac/5A

Inline Paddle Flow Switches

UR1 TInline Paddle

Copper Flow Switch


• 1.3 - 35 l/min switching range• Solder fittings Ø12 - Ø42• Low pressure loss

• Copper pipe, stainless wetted parts


UI G/AInline Paddle Inductive

Proximity Flow Switch






• Contactless switching, no magnets

Inline Paddle

Flow Switch with Reed Switch

Inline Paddle

Flow Switch with Microswitch

ATEX

OPTION

ATEX

OPTION

01892 664499

Flow

Honsberg was established in 1963, in Germany. Part of the GHM group, Honsberg is one of the leading names in flow products, and also supply instruments for measuring and monitoring pressure, level and temperature.

PVL has been supplying Honsberg products for over 20 years, and is proud to contnue to supply

their range that offer the highest build quality, precision and accuracy.

Call our engineers now to discuss your requirements.

28

www.pvl.co.uk

FW1-GPPlastic Inline Piston

Flow Switch




• Not affected by dirt

• Plastic connection material

• 230Vac/0.5A reed switch

MR1KInline Piston

Flow Switch



• Pressure 200 bar (500 bar option)


• -20..+120 °C (-20..+150 °C option)

FW1-GMSimple Inline Piston

Flow Switch





• Brass connection material

• 230Vac/0.5A reed switch

RVMMiniature Inline Piston

Flow Switch

• 8mm pipe size

• 0.04 - 3 l/min switching range• 1/4” threaded connections

• Pressure up to 350 bar


• -20..+100 °C optionally 160 °C

Inline Piston Flow Switches

Inline Piston

Flow Switch

HD1K / HD2K



• Pressure 200 bar (500 bar option)


• Viscosity compensated version(HD2K)

HD1F / HD2FInline Piston

Flow Switch



• Optionally side or top displays


• Viscosity compensated version(HD2F)

www.pvl.co.uk

Flow


www.pvl.co.uk

29

01892 664499

FW4VInline Piston

Flow SwitchInline Piston

Flow Switch

MR



• Pressure 200 bar


• C/O reed switch rated at 250Vac/1.5A

HR2K1Inline Piston

Flow Switch



• 1 1/4” - 2” BSP threaded connections



• Lower Pressure Loss

HM1K / HM2KInline Piston

Flow Switch





• Viscosity compensated version(HM2K)

HR2K2Inline Piston

Flow Switch



• 1 1/4” - 2” BSP threaded connections



• Lower Pressure Loss


FW3Inline Piston

Flow Switch

• For 8 mm pipe size

• 0.4 - 2.5 l/min switching range• 1/4” threaded connections




01892 664499

• For 15 mm pipe size

• 1 l/min switching point

• 1/2” threaded connections

• Bi-directional flow switching• Pressure up to 300 bar

• Viscosity stabalised

Flow

Need a connector cable?See our range of accessories on page 42.

30

www.pvl.co.uk

MF007GMCompact Inline Flow Switch

for Liquid

• For 7 mm nominal width

• 0.05-1 l/min switching range• M10x1 threaded connections• For liquids

• Compact construction in brass

• Up to 6 bar pressure

MF-003Minature Inline Flow Switch

for Air / Gas

FXPlastic Inline

Flow Switch


• 0.4-12 l/min switching range• 1/2” male threads

• Intergrated filter• Plastic wetted parts



HR1MVInline Piston

Flow Switch

• For 32-50 mm pipe size

• 2-220 l/min switching range

• 1 1/4” - 2” threaded connections



• Viscosity stabalised

Domestic Inline

Flow Switch

• For domestic 15mm or 22mm pipes

• Wras approved for drinking water

• 0.8-6 l/min switching range

• 15mm / 22mm compression fittings• Rated to 8 Bar pressure

• User adjustable

615 / 622 FWJ GMInline Flow Switch

With Indicator

• For 8-20 mm pipe size

• 1-16 l/min switching range

• 1/4” - 3/4” threaded connections

• Mechanical visual display


• Metal switching head

www.pvl.co.uk


• 1-100 Nl/min switching range

• M5 threaded connections

• For air or gas

• Compact construction in brass


ATEX

OPTION

Flow



01892 664499

31

01892 664499

UB25Super Sensitive

Inline Flow Switch

• For 25mm pipe sizes

• Detects low flows from 0.23 l/min• 1” BSP male to 1” BSP female thread


• Rated from -20 °C to 90 °C

• 100 l/min max flow

15mm Low Flow

Inline Flow Switch

• For 15 mm pipe sizes

• Detects low flows from 0.1 l/min• 1/2” BSP connections


• Max Flow 30 l/min• Reed switch or relay option

C15

P20 SeriesCorrosion Resistant

Inline Flow Switch


• Detects low flows from 0.065 l/min• 3/4” BSP unions with PVC push fit• Pressure up to 18 bar

• No metal wetted parts

• Reed switch or relay option

P25Corrosion Resistant

Inline Flow SwitchMicro Inline

Ultra Low Flow Switch

MF20

• For 15mm to 25mm pipe sizes

• Detects flows from 2.5 l/min• 1” BSP Threaded and PVC push fit• Pressure up to 18 bar


• 100 l/min max flow

• For 6 mm to 20 mm pipe sizes

• Detects low flows from 0.30 litres per hr• 3/4” BSP unions with PVC push fit• Vertical Installation only


• Suitable from 1 to 14 liquid PH level


01892 664499

Flow

Need it Next Day?We have 1000s of items in stock.

25mm Low Flow

Inline Flow Switch


• Detects low flows from 0.1 l/min• 1”BSP connections


• Max Flow 100 l/min• Reed switch or relay option

C25

32

www.pvl.co.uk

FM GRInline Piston

Flow Switch

• Nominal pipe sizes 8mm to 15mm

• 0.4 - 12 l/min switching ranges• 1/4” -1/2” BSP threaded connections


• 20 l/min max flow• High switching power

G GRInline Piston

Low Flow Switch


• 0.15 - 0.4 l/min switching ranges• 1/4” -1/2” BSP threaded connections


• Up to 12 l/min max flow• Accurate switching points

Inline Piston

Flow Switch


• 0.4 - 90 l/min switching ranges• 1/4” -1 1/2” BSP threaded connections

• Medium Temperature -20 °C to 110 °C

• 150 l/min max flow• Lower Pressure Loss

FF GR

VD GR/GKInline Piston

Flow Switch

• Nominal pipe sizes 8mm to 80 mm

• 1 - 600 l/min switching ranges

• 1/4” -3” BSP threaded connections


• 720 l/min max flow• ATEX option available

VD FTInline Piston

Flanged Flow Switch



• Flanged process connections


• Up to 8000 l/min max flow• ATEX option available

Inline Piston

Flow Switch



• Screw Connection with socket


• 250 l/min max flow• No contact switching

PD

Inline Piston Valve Type Flow Switches

www.pvl.co.uk

ATEX

OPTION

ATEX

OPTION

Flow


www.pvl.co.uk

33

01892 664499

Inline Flow Indicator

with Switch

NO / NOK

VF / VFRInline Flow Indicator

with Switch

• For 8 mm pipe

• 0.005 - 5l/min display ranges• 1/4” BSP threaded connections

• Maximum temperature 100 °C • Switching contact option(VFR)

• Brass or Stainless Steel

NJ / NJVInline Flow Indicator

with Switch




• Maximum temperature 100 °C • Viscosity stabalised option (NJV)

• Brass or Stainless Steel


• 3 - 60 l/min display ranges


• Maximum temperature 90 °C • 360° Rotatable Scale

• Switching contact option(NOK)

UK-020Variable Area

Flow Meter

• For 4 mm pipe

• 0.005 - 25 l/min meter ranges• 1/8” NPT female connection

• Brass or stainless option

• 30 l/min max flow• Optional valve

GK-010Variable Area

Flow Meter


• 2 - 650 l/min meter ranges

• Female or male threaded connections

• Maximum temperature up to 100 °C • 650 l/min max flow• Optional switching output

TX FT Inline Flow Indicator

with Switch



• Flanged connections

• Maximum temperature 350 °C • 4000 l/min max flow• Rated to 40 bar

Flow

Inline Flow Indicators

01892 664499

Comac Cal s.r.o. established in 1987, in the Czech Republic, has been engaged in development and

production of measuring and sensor technologies since it’s establishment.

Comac Cal, offer a wide range of inductive flow meters also known as ‘mag meters’, custom built to our customer specifcations.

Using the highest quality materials and precision electronics, Comac Cal’s products are exceptionally robust, accurate yet very cost effective compared to others in the market.

34

www.pvl.co.uk

Flow Transmitter

with 2 Switch Points

OMNI FCalorimetric Flow

Switch / Sensor

FS SERIES

• 1/4” or 1/2” Screw in connection

• 2 - 150 cm/s metering range

• 4-20 mA or 0-10V output

• PNP / NPN switch output

• All stainless wetted parts

• Fast response times

• 1/4” or 1/2” Screw in connection

• 4 - 150 cm/s metering range

• 4-20 mA output option

• PNP / NPN or relay switch option

• No maximum flow• ATEX option available

Flow

Flow Meters / Flow Sensors

www.pvl.co.uk

Industrial Inductive

Flow Meter

• Nominal sizes of 10 mm to 400mm

• Wide flow measuring ranges• With or without display

• Flanged, sandwich,threaded,food grade

• 4-20mA or pulse output options

• Choice of lining & electrodes materials

Compact Inductive

Flow Meter


• Bidirectional for 0.2-12 m/s• Choice of lining & header materials

• Sandwich or threaded connections


• Potable water option

Pelton Wheel

Flow Meter


• Measuring range of 0.3-6 m/s• Choice of fitting adapters • M12 or cable options


• IP67 Rated

FLOW 38 FLOW 32 FPW

ATEX

OPTION

ATEX

OPTION

Multipulse Positive

Displacement Flow meters

• Nominal sizes of 15mm to 50mm

• 0.2 - 330 l/min flow ranges• Aluminium, 316 stainless or UPVC

• -40 to 100 °C temperature ranges

• Quadrature pulse output option

• Ideal for visocus fluids

MP

ATEX

OPTION



01892 664499

35

01892 664499

TS & TSP

ER100Surface Mount Temperature Switch

N/O or N/C Contacts

TF1Temperature Switch ≤ 250V

N/O or N/C Contacts

Model 507Temperature Switch ≤ 250V

C/O Contacts

• 35°C-85°C Set Points (5° increments)

• Max temperature 85°C• Switch rating up to 250V

• 1/2” or 3/8” BSP thread(others available)

• Brass construction (stainless option)


510 / 514 / 519Thermal Contacts ≤ 24V

SP Contacts

Model 506Temperature Switch ≤ 250V

N/O or N/C Contacts




• Brass construction (stainless option)


Temperature

Fixed Temperature Switches

01892 664499

ATEX

OPTION

ATEX

OPTION



• Wide choice of threads

• Brass construction

• Rated to 300 bar

Temperature Switch ≤ 240VN/O or N/C Contacts



• 1/2” or 3/4” BSP thread

• Brass or stainless construction

• Rated to 100 bar

• Up to 170°C Set Points



• Die Cast Aluminium

• ± 3°C Tolerance

• 30°C-130°C temperature set points

• Switch rating up to 24V

• Choice of X3, L1 - L2 threads

• Brass construction

• 300mA max resistive current• Faston 6.3 x 0.8 electrical connection

Greisinger Electronic has more than 35 years experience in measuring devices, indicators and regulators as well as temperature sensors.

Part of the GHM group, Greisinger offers a large range of quality sensors and handheld devices

designed for a broad scope of applications.

PVL is an official distrributor for all of their range in the UK.

36

www.pvl.co.uk

Temperature

Temperature Controller

C/O Contacts

TR & TTR

MZTemperature Switch with Gauge

C/O Contacts

MDTemperature Switch with Gauge

C/O Contacts

LABO T012Temperature

Transmitter / Transducer

C03 / C08Temperature Switch ≤ 250V

C/O Contacts

Adjustable Temperature Switches

www.pvl.co.uk

FCFlameproof Temperature Switch

C/O Contacts

ATEX

OPTION

• 35°C-130°C switching ranges

• Ajustable in 5°C increments


• 1/2” BSP taper thread

• Brass wetted parts

• Choice of one or two contacts

• 25°C-215°C Set Points

• Max temperature up to 300°C• Switch rating up to 250V


• 123mm Brass bulb,2m stainless capillary

• Visual scale optional





• Visual scale optional





• ATEX & IECEx approved

• 0°C-200°C switching ranges

• Calibration accuracy ± 3°C



• Brass wetted parts

• Locking dial sets switch set-point

• -20°C-100°C measuring range

• 123mm, 173mm or 223mm sensor


• 1/2” BSP or plastic M12x1.5 connection • Stainless steel wetted parts

• 4-20mA, 0-10V or frequency output


www.pvl.co.uk

37

01892 664499

7024 / 7124TC / TRHigh Temperature

Probes

• Type J / Type K / Type N Thermocouple

• -100°C-1000°C ranges

• Choices of fittings and threads• Custom length to specification• Stainless steel construction


GTF SeriesATEX

Temperature Probes

• Pt100 / Pt1000 / Nicr-Ni (Type K)

• 20°C-100°C range (600°C option)

• Choices of fittings and threads• Custom length to specification• Stainless steel construction


Temperature

Temperature Probes

01892 664499

ATEX

OPTION

• Fe-CuNi (type J); NiCr-Ni (type K)

• Up to 400°C measuring range

• RTD Pt100, class B

• Thermowell material stainless steel

• Measuring tip plane or angle 120°

• Cable flexible fiberglass insulation

Compact

Temperature Probe

ATEX

OPTION

7134 / 71358005 / 8105Duct Temperature

Sensor

• Fe-CuNi (type J); NiCr-Ni (type K)

• RTD Pt100/Pt1000 class B,

• Protective tube, stainless steel 1.4571• Custom length to specification• 2, 3 or 4 wire options

• 4-20mA output optional

7122Tube Surface

Probe

• Pt100 Thermocouple

• Up to 250°C measuring range

• RTD Pt100, class B

• 2, 3 or 4 wire options

• Pipe clamp fitting• Cable flexible fiberglass insulation

• RTD Pt100

• -50 °C..+90 °C / -40ºC..+120ºC ranges• Measuring element inside or outside

• Polycarbonate case, white or aluminium

• Protection class IP65

• Screw in terminals

Ambient Temperature

Sensors

Martens Elektronik GmbH, founded in 1988, also part of the GHM group has more than 20

years experience in the field of measuring, control, and process measurement.

The product portfolio consists of digital displays, signal converters, sensors, and analysis

devices. Nearly every physical or electrical quantity can be measured.

PVL is an official distrributor for all of their range in the UK.

38

www.pvl.co.uk

Temperature

Flex T

GMH 3710Handheld Precision

Thermometer

Omni TETSTemperature

Transducer

Temperature Sensors

www.pvl.co.uk

• Ranges from -40° to +100°C (PT100)

• Up to 250°C with optional swan-neck

• 1/2” BSP stainless steel thread

• 50mm; 150mm and 200mm probe option

• 4 - 20 mA / 0-10v output

• Optional switch output

• -199.99- +199.99 °C measuring ranges• 0.01 °C resolution • Choice of Pt100 Probes

• 2 logger functions

• Min / Max alarms• Adjustable analog output

• Ranges from -40° to +100°C (PT100)


• 1/2” BSP stainless steel thread


• 4 - 20 mA output

• Rated to 25 bar

• Ranges from -0° to +200°C


• 1/4” BSP,1/2” BSP or T piece connection


• 4 - 20 mA / 0-10v output

• Two switch outputs



01892 664499

Temperature

Transducer with SwitchTemperature

Transducer

G 1730Handheld with

Integrated probe

• -199.99- +199.99 °C measuring ranges• 0.01 °C resolution • Pt100 4 wire probe not included

• 2 logger functions

• Min / Max alarms• Adjustable analog output

MT 400Handheld Infra Red

Thermometer

• -20 °C - +343 °C measuring ranges

• 0.1 °C resolution • Laser pointer

• Fast and reliable

• < 1s response times

• 9V Battery

39

01892 664499

Fig. 100/200Stainless Steel

Float Valve

• 10mm to 80mm port diameter

• 3/8” to 4” BSP connection

• 304 (100) or 316 (200) stainless steel

• Flow rates up to 291,714 litres per hr

• Rated up to 10 Bar

• Silcon seal (others available)

Valves

Float Valves

01892 664499

Fig. 200 ABStainless Steel

Anti-bubble Float Valve

531Stainless Steel

Level Control Valve

AQT SeriesPlastic

Float Valves

Fig. 200B

Fig. 200 EVVertical In-Flow

Stainless Steel Float Valve

Stainless Steel

Flanged Float Valve


• 3/8” to 2 1/2” BSP connection

• All 316 stainless steel





• DN10 to DN100 flange connection• All 316 stainless steel

• Flow rates over 291,714 litres per hr





• All 316 stainless steel





• 1” to 4” BSP connection (flange option)• 304 stainless steel

• Flow rates up to 400 m3/hr


• PTFE and NBR seals



• All Plastic, various options

• Flow rates up to 285 l/min

• Food grade versions

• Corrosive proof options

Keep up to date.

To keep updated for new products sign up

for our email newsletters or catalogue mailing list on our website:-

www.pvl.co.uk/newsletters

40

www.pvl.co.uk

Valves

Solenoid Valves

www.pvl.co.uk

SVBBrass Solenoid

Valves

SVSStainless Steel

Solenoid Valves

SVPPlastic

Solenoid ValvesATEX

OPTIONATEX

OPTION

ATEX

OPTION

Fig. 503Vacuum Breaker

Valve

• 0.05 to 0.50 bar depression ranges• 1/2” to 1” BSP, clamp or ANSI options

• Stainless steel construction

• Rated to 16 bar

• Rated from -20°c - 200°c

• Viton lock valve (others available)

Fig. 473Stainless Steel

Check Valve

WR 207/302Full Bore

Ball Valves

• 2 piece(207) or 3 piece(302) versions

• 1/4” to 4” BSP connections


• Rated up to 63 bar


• PTFE seals

• Direct acting or assisted lift versions


• Brass body construction

• Various voltage options

• Choice of normally open / closed




• Stainless steel body construction






• Nylon or Polyprop construction




• One way non return valve



• Rated up to 63 bar


• Viton Seal (EPDM option)


www.pvl.co.uk

41

01892 664499

Plastic MetalEpoxy Resin

Systems

• 2 Component System

• Fast Cost Efficient Durable Repairs• Extremly Highly Temperature Resistant• Pressure Resistant

• Wear Resistant Even Extreme Abrasion• Residual Elasticity & Impact Resistant

Weicon Adhesives & Sealents

Epoxy Resin Repair & Ahesives

01892 664499

Repair SticksQuick Repair

Epoxy Resin

WeiconlockThreadlocking Adhesives

and Sealents

WeiconlockPipe and Thread

Sealing

Epoxy Adhesives

Easy Mix RK7000Structural Acrylic

Adhesive

Universal Fast Curing

Adhesive

• 2 Component System

• Fast Cost Efficient Durable Repairs• Cut, Knead Then Use

• Highly Temperature Resistant

• Solvent Free -Cures with No Shrinkage

• Food Grade Versions

• Cold-Curing 2 Component System

• Fast, Safe & Economical

• High Tensile and Impact strength

• Self Levelling & Fast Curing

• Transparent & Metal Versions

• Gap Filling and Suitable for Potting

• Quick and High Initial Bonding Strength

• Residual Elasticity & Impact Resistance

• Suitable Large Range of Temperatures

• Ageing Resistant

• Grindable and Overpaintable

• For indoor and Outdoor Use

• Choice of Varying Viscosities

• Varying Strengths for Locking or Removal

• Threadlocking, Retaining or Sealing

• Screws & Nuts or Stud Bolts


• 20ml, 50ml or 200ml Pack Sizes

PVL is the Official UK distributor for Weicon Products, we hold thousands of items in stock for Next Day Delivery. Which can be purchased online at:- www.pvldirect.co.uk

Weicon also offer specailised solutions for unsual or extreme applications. PVL also offer quantity or reseller discounts call now to discuss your requirements:-

01892 664499

• Choice of Varying Viscosities

• Hyrdraulic & Pneumatic Systems

• Cooler & Compressed Air Systems

• Threaded Connections


• 50ml or 200ml Pack Sizes

42

www.pvl.co.uk

Weicon Adhesives & Sealents

Sealing & Adhesives

www.pvldirect.co.uk

Flange Sealing

and Gasketing

Plast-o-SealPermanently Plastic

Universal sealant

Super GlueCyanoacrylate

Adhesives

O-Ring Bonding SetComplete Kit to

Make Custom O-rings

• Includes:-

• Contact Adhesive

• Contact Primer

• Surface Cleaner

• Cutting Tools

• 1m Nitrile Cord of ø 2,3,4,6 & 8mm

Flex 310 MElastic Adhesives

and Sealents

Flex+bondUniversal

Elastic Adhesive

• Strong & Permanently Elastic

• Temperature resistant from -40°C

to +90°C

• Weather/ UV Rays Resistant,

Overpaintable (wet in wet),

Sandable, and Resistant to

Ageing and Salt Water.

• Super Fast & Economical

• Versatile & Durable

• High Temperature Resistant

• Metals, Glass, Wood, Plastics,

Ceramics, Leather and Rubber.• Free of Solvents

• Strong Adhesives and Sealants for

Material-Integrated Joints of Metals,

Plastics and Many Other Substances

• High Adhesive Power, Even Without

The Use of Adhesive Primers

• Free of Silicone and Isocyanate

Can’t find what you are looking for?Full range of Weicon products on our Online Shop.

www.pvldirect.co.uk

Weiconlock

pvldirect

• Choices of Varying Viscosities

• Varying Strengths for Retaining & Sealing

• Flanges, Cases or Lids

• Shafts, Hubs, Pulleys and Bearings


• 50ml or 300ml Pack Sizes

• Seal Smooth Treated Flanges

• For Machine, Gearbox & Motor Casing• Resistant to Fuels, Oils & Chemicals

• Improve Performance Old / New Gaskets

• Solvent & Slicon Free

• 90g, 120g, 230g or 300g Pack Sizes

43

01892 664499

Zinc SprayLong Term Cathodic

Corrosion Protetion

• Fast-Drying Adherent Protective Layer

• With Microfine Zinc Flakes• Resistive to Extreme Environments• High Grade Anti Rust Primer

• Coating of Welded Joints/Drilled Holes

• Dust Dry After 15 Minutes

Weicon Technical Sprays & Assembly Pastes

Technical Sprays

01892 664499

Rust ConverterRust Converter and Base coat

in One Process

Brake CleanerAutomotive Universal

Cleaner

W44T Multi SprayMultifunctional Oil

with Multiple effects

Metal Fluid

Cleaner Spray SThe Ultimate Cleaning

and Degreasing Spray

Universal Metal

Cleaning & Protection

• Powerful Degreasing and Cleaning

• Evaporates Without Residue

• For All Metals, Glass, Ceramics

• Most Plastics PVC, Polystyrene

• Before Priming or Painting, Cleaning

Machine Parts

• Outstanding Creeping Capacity

• Corrosion Protection, Cleaning

• Lubrication, Water Displacement

• Loosens Threads, Bolts, Fittings Etc

• Dispels Moisture on Electrical Contacts

• Protects and Preserves Tools/Machines

Since 1947, Weicon GmbH & Co. KG has been producing an extensive range of industrial adhesives and sealants, technical sprays and high-performance assembly

pastes and greases to the global market for all areas of the industry in Germany.

In 1967 Weicon, in addition, began developing and distributing a range of high quality

cost efficient cable stripping tools. Weicon are now represented worldwide in over 100 countries. Based in Munster Germany, Weicon also has subsidiaries in Dubai, Canada, Turkey, Romania, South Africa, Singapore, Spain and the Czech Republic and have a

global distribution network throughout the world.

• Neutralise Rust on Cast Iron or Steel

• Preventative Corrosion Protection

• Highly Temperature Resistant

• Creates Stabalised Base Coat

• Anti-Corrosive

• Fully Dry After 2 Hours

• Stainless Steel, Ceramics, Glass

• Plastics, Wood, Zinc and Other Metals

• For Matt or Polished Surfaces

• Food Grade NSF Certified• Protects, Cleans and Cares

• Anti-static

• Universal Degreasing and Cleaning

• Evaporates Without Residue

• Removes Oily and Greasy Impurities

• Brakes, Pads, Discs, Blocks, Cylinders

• Springs, Bushes, Clutch, Linings

• Pumps Gears and Carburettors

44

www.pvl.co.uk

Sprays, Assembly Pastes & Lubricants

www.pvldirect.co.uk

Grease Free

Dry Lubricant

Leak Detection SprayFoam-Forming

Leak Detector

Anti-Spatter SprayWelding Spatter

Prevention Spray

Spray-On Grease H1Food Grade High

Temperature Grease

• Odourless and Tasteless Grease

• For the Food, Cosmetic and

Pharmaceutical industry

• Wherever Direct Contact With Food

Cannot Be Excluded. • NSF Approval

Allround LubricantAllround

High Performance Grease

• Excellent Sliding Properties• Adheres to Metal, Plastic and Wood

• High PTFE Content Reduces Friction

• Repels Dirt, Dust and Water

• Perfect for Runners, Belts & Rollers

• Water-Rejecting Coating for Seals

• Non Flammable and Anti-Corrosive

• Fast Convenient and Reliable

• Can Be Used Wherever Compressed

Air, Natural or Liquid Gas is processed

• Does Not Form Any Hazardous

Compounds with Gases

Can’t find what you are looking for?Full range of Weicon products on our Online Shop.

www.pvldirect.co.uk

PTFE Spray

Weicon Technical Sprays & Assembly Pastes

Anti-Seize PasteAnti-Seize

Assembly Paste

• Protecting, Separating and

Lubricating Agent

• Protects Against Corrosion, Seizure

And Wear, Stick-slip Phenomena,

Oxidation, Fretting Corrosion and Electrolytic Reactions (Cold Welding)

pvldirect

• Used to Clean Welding Nozzles And To

Keep Them Clean

• Prevents Against The Effect Of Weld

Splashes Without Impairing The

Welding Seam.• SLV-tested, Silicone-Free

• Extremely Long Regreasing Intervals• Increased Functional Dependability

and Retention of the Value of the

Machine and Production Plants

• Reduction of the Maintenance and

Repair Work

45

01892 664499

Accessories

Caps / DIN plugs / Connectors / Filters / Barriers / Displays

01892 664499

Rubber Boots Plastic Caps

DIN Connectors Signal DIN Connectors

Connector Cables Filters

Power Supplys / ATEX barriers Displays

and many more items, visit www.pvl.co.uk for

the entire range

46

www.pvl.co.uk

Best Prices from the Best Brands

We are now Official UK Distributors of

47

01892 664499

Unit 9 Lexden Lodge Industrial Estate, Jarvis Brook, Crowborough

East Sussex, TN6 2NQ.

Tel: +44 (0) 1892 664499

Email: [email protected]: www.pvl.co.uk

Shop: www.pvldirect.co.uk

01892 664499

www.pvl.co.uk

Call Our Engineers Now

View Our Entire Range

www.pvldirect.co.uk

Buy Direct Online

Documents

Pressure, Level, Flow & Temperature - Switches, Sensors, Meters … · 2019-08-05 · Electronic Pressure Switches / Sensors 8 Pressure Sensors 9 Pressure Indicators Clogging Indicators