• ImproveAvailability with reduced nuisance trips

• ImproveUptimewith safety diagnostics

• ImproveSafety with SRO to ensure safety function

• LowerInventory a transmitter, switch and gauge in one

• SimplifyComplexSafetySystemswith SFF = 98.8%

• ReduceMigrationCosts with backward and forward compatibility

o n e S e r i e S S t - B - 0 1

One SeRieS SaFety tRanSmitteRpReSSuRe and tempeRatuRe tRanSmitteR-Switch

RoHScompliant

LEADERS IN SAFETY, ALARM & SHUTDOWN

DUAL SEALCERTIFIED

2 w w w . u e o n l i n e . c o m One Series ST- B -01

The One Series Safety Transmitter is a transmitter-switch for monitoring pressure or temperature and meets the requirements of SIL 2 for random integrity at HFT = 0, SIL 3 for random integrity at HFT = 1 and SIL 3 for systematic capability. The One Series Safety Transmitter incorporates UE’s patented IAW self diagnostics, redundant and diverse signal processing and software algorithms to detect abnormalities in the process and internal faults. The design is based on a powerful microprocessor that provides an extremely fast response time for emergency shutdown situations.

Some applications require a local switch that is capable of initiating an emergency shutdown at the point of measure. This avoids any time lag that may occur by sending a signal to a safety PLC and having the PLC initiate the shutdown. This practice can take several (precious) milliseconds. Unique to UE One Series transmitters, the One Series Safety Transmitter can provide the shutdown directly in less than 100 milliseconds, ideal for positive displacement pump applications (for example). This high-capacity safety relay output (SRO) with programmable set point and deadband, handles high voltages and current to actuate a control valve or shut down a compressor directly and rapidly, something a transmitter alone cannot do.

UE is aware that not all Safety Instrumented System (SIS) applications require an emergency shutdown when abnormal conditions are detected. For this reason, the One Series Safety Transmitter provides additional logic outputs for use in voting logic schemes that may be used to report warnings prior to a shutdown. This feature provides the SIS design engineers with the ability to balance the need to provide a safe working environment with the need to keep the process running - but only if conditions permit it.

The combination of features like no moving parts and IAW (I Am Working) self-diagnostics provide a highly reliable, accurate and repeatable monitor for detecting pressure and temperature process variables and making intelligent switch decisions based on retained settings and the process conditions. The IAW feature provides a solution to the “blind device” issue common with mechanical apparatus. The health status of the One Series Safety Transmitter is communicated via the display, 4-20 mA analog signal and IAW status outputs. If a fault is detected, the 4-20 mA signal will output <3.6 mA, compliant to the NAMUR NE 43 standard. Simultaneously, the IAW status signal will change state. By monitoring both signals, redundant methods of fault detection are provided, independent of the process variable.

The One Series Safety Transmitter provides an explosion-proof type 4X/IP66, weather-tight enclosure suitable for harsh environments and hazardous (Class I, Division 1, Zone 1) locations and allowing the One Series Safety Transmitter to be mounted outside. Repeatability of 0.1% of maximum range rivals transmitters that cost much more than the One Series Safety Transmitter. Combined, these features provide an extremely accurate Safety Relay Output (SRO) set point that will not drift over time.

Model 2SLP is loop-powered and operates in a transmitter loop attached to an analog PLC or DCS input and provides a field-scalable 4-20 mA signal over a 2-wire connection. Model 2SLP contains an auxiliary solid-state relay switch rated for 12 - 250 VAC at 5 amperes.

The set point and deadband (hysteresis) of the Safety Relay Output is fully programmable over the entire range of the sensor. Reaction time for the One Series Safety Transmitter to a process change is less than 100 milliseconds - switch outputs only with delay set to "OFF".

overview features• Digitalprocessdisplay

• Programmablesetpointanddeadband

• Self-diagnosticsolid-statedigital

electronics

• Plugportdetection

• Adjustablenuisancetripdampening

• ConfigurableIAW®self-diagnostics

• Min/Maxprocessvaluesmemory

• 3-yearwarranty

• ProvideaSFF=98.8

w w w . u e o n l i n e . c o m 3One Series ST- B -01

ONE Series Safety Transmitter

The One Series Safety Transmitter process display module features a large, easy-to-read back-lit LCD display, showing the process variable and the health status of the instrument. (See Display Features for a complete description.) Set point, deadband and minimum/maximum process values can be easily accessed from the front of the unit after the locking cover is removed. Programming and interrogating the One Series Safety Transmitter is done through two buttons on the faceplate, providing easy setup and an added level of security from hackers and tampering. No remote hand-held programming device is required.

process display module

The One Series Safety Transmitter model 2SLP incorporates a Safety Relay Output (SRO) to provide a high-capacity switch rating of 240 VAC at up to 5 amperes. The SRO may be used to provide an emergency shutdown signal locally, at the point of measure, to external equipment such as a motor control center (MCC) or electrically actuated valve positioner. The state of the SRO (open or closed) may be monitored with a logic solver using the SRO Status output.

High-Power Safety Relay Output

Shown with spring-loaded RTD sensor

Shown with differential pressure sensor

Shown with gage pressure sensor

Shown with dual seal and gage pressure sensor

4 w w w . u e o n l i n e . c o m One Series ST- B -01

Foralarmandshutdownswitchingapplications,thereisnobetterchoicethantheOne SeriesfamilyofelectronicswitchesfromUnitedElectricControls. Measuringgaugepressure,differentialpressureor temperature, theextremely ruggedandreliable One Series takes all of the guess-work out of monitoring process variables to prevent injury, loss and downtime.Withitslargedigitaldisplay,fully-adjustabledeadband,and100%solid-statedesign,theOne Seriesistheobviouschoiceforplantupgradesandnewconstructionprojects. Abuilt-inmicroprocessor includesdigital repeatabilityand intelligentself-diagnostics,offeringplantoperatorsanextremelyreliableandsmartprotectiondevice.

application versatility

Proven in use in literally thousands of diverse applications, UE's explosion-proof One Series models extend this revolutionary switching technology toZone1(Division1)areas.

Herearejustafewapplications:

• Safetysystems–meets the requirements of SIL 2 for random integrity at HFT = 0, SIL 3 for random integrity at HFT = 1and SIL 3 for systematic capability.

• FMEDAreportavailableuponrequest

• Pumpsandcompressors–start/stop,emergencyshutdown

• Lubricatingoilmonitoring–sumptemperature,bearingpressure,predictivemaintenance

• Hydraulicoilpressure–highpressuremonitoring,emergencyshutdown,lowpressurealarm

• Filtermonitoring–changeindication,provingflow

• Plantupgrades–powerandwastewaterplantupgrades,drop-inreplacementformechanicalswitches

the One Series and other switches monitoring lube oil on a gear box.

exida®isaregisteredtrademarkofexidaConsultingLLC.

w w w . u e o n l i n e . c o m 5One Series ST- B -01

ONE Series Safety Transmitter

Powerinput/Switchoutput:

Model InputType(Range) MaxSwitchRatings(SPST)

2SLP472-Wire24VDCanalog

inputlooppowered(20-40VDC)@4-20mA

12-250VAC@5.0A

Accuracy: 0.5%offullrangespan,atroomtemperature

Repeatability: 0.1%offullrangespan

Ambientoperatingtemperaturerange:

Displayoperatingtemperaturerange:

10°F(-12°C)158°F(70°C)

specifications

ApprovedAmbientOperatingTemperatureRange

cULus(DivisionSystem) cULus&ATEX(zoneSystem)

2SLP -40°F(-40°C) 158°F(70°C) -40°F(-40°C) 158°F(70°C)

the One Series and other switches monitoring lube oil on a gear box.

6 w w w . u e o n l i n e . c o m One Series ST- B -01

Long-termstability: ±0.25%ofrange/yearmaximum

Temperaturedrift: 0.03%offullscaleper°C(0.06%fortheK10range)CompensatedtemperaturerangeforP10,K10rangeis-20°Cto50°C

Switchresponsetime: “Change-of-output”response≤100mS(fordetectionoffullstepchangeandchangeofoutputstate,delayfeatureoff)

Displayresponsetime: 400mS(2.5Hz)

Transientfiltering: Programmabletimeconstantsbetween250mSand2secondsin2Xincrements

Diagnostics(IAW®): Openorshortedsensor;pluggedport;powersupplyoutofrange;overandunder-rangeconditions;microprocessorfaults/failure;keypadshort;switchfault

Controlmodes: Field-configurationforSROswitchactionwithprogrammablemanualreset

mode action Fault

Open Rise Open on rising media Open

Open Fall Open on falling media Open

window Open outside window Open

Analogoutput: ComplianttoNAMURNE434-20mAoutput,360ohmsmax.at24VDC,Fieldscalable,2:1turndown.Variousfaultsareindicatedat<3.6mA.Seeinstallationmanualfordetails.

SafetyRelayOutputSetpoint&deadband:

User-configured,100%adjustableoverentiresensoroperatingrange,deadbandof0isundefined

StatusOutputs: SROStatus-30VDC@20mAMaximumIAWOutput-30VDC@20mAMaximum

Enclosure: Type4X/IP66certifiedpolyesterpaintedaluminumalloy360

Faceplate:

Cover:

UV-resistantpressuresensitivekeypadanddisplayoverlay

Polyesterpaintedaluminumwithtemperedglassinsert

Conduit: 3/4”NPTfemalealuminumcasting

specifications (continued)

w w w . u e o n l i n e . c o m 7One Series ST- B -01

ONE Series Safety Transmitter

IAW® is a registered trademark of united electric controls co. Specifications subject to change without notice

Display: Backlit•Local4digitx0.5”LCD•IAW®(IAmWorking)status•Processvariable•Unitsofmeasure•Switchstatus

•Latchstatus

•Setpointvalue•Deadbandvalue•Min/Maxvalues•Faultcodes

Memory: Programminganddataprotectedbynon-volatileEEPROM

Sensors: Gauge pressure –316Lstainlesssteel,weldeddiaphragm,1/2”NPT(female)processconnection,micro-machinedpiezo-resistivestraingaugesiliconelement,0.25mlsiliconeoilfill.Maximummediatemperature:-40to257°F(-40to125°C)

differential pressure - 316Lstainlesssteel,weldeddiaphragms,1/4”NPT(male)processconnections,piezo-resistivestraingaugesiliconelement,siliconeoilfill.Maximummediatemperature:-40to257°F(-40to125°C)

temperature – 316stainlesssteel0.25”ODsheathcontaininga100ohm4-wireplatinumRTDelementavailablewithepoxyfill(locallowtemp)orpowderfill(remotehightemp).Mediatemperaturelimits:-328to1000°F,intermittentto1100°F(-200to538°C,int.to593°C)forTHandTTranges-40to500°F(-40to260°C)forTRandTLranges

Vacuum: Allpressuresensorswithstanddeepvacuumwithnocalibrationeffects.Twocompoundvacuumrangesareavailable-P06andP08(seepage8).

EMI/RFI: CompliancetoCEEMCrequirements:EN61000-6-2,EN61000-6-4

Emission: EN61000-6-4ClassA

Immunity: EN61000-4-2ImmunitytoElectrostaticDischargeEN61000-4-3ImmunitytoContinuousRadiatedDisturbancesEN61000-4-4ImmunitytoElectricalFastTransientsEN61000-4-5ImmunitytoSurgesEN61000-4-6ImmunitytoContinuousConductedDisturbancesEN61000-4-11ImmunitytoVoltageDipsandInterruptions

Weight: 4.5-6.0lbs(2.0-2.7kg)

Shock: perMIL-STD-810Gmethod516.6–whendeviceissubjectedto15g(10mSec)and40g(6mSec);3drops/axisEffects:lessthan+/-0.40%ofrange

Vibration: perIEC61298-3(fieldandpipelineapplicationswithhighvibrationlevel,10-1000Hzrange,0.014”displacementpeakamplitude,5gaccelerationamplitude)Effects:lessthan+/-0.40%ofrange

specifications (continued)

8 w w w . u e o n l i n e . c o m One Series ST- B -01

how to order

Model Descriptionzone Division

0 1 2 1 2

2-wireloop-poweredor24Vexternalpowered,4-20mAoutput,programmablesolid-staterelayrated@250VAC,5amperes,2statusswitchoutputsratedat30VDC,20mAmax.

2SLP47

Buildapartnumberbyselectingthemodel,sensorandoptionsfromthetablesbelow.

Sensor PressureOperatingRange1+displayresolution MaximumOverRange2

Gaugepressure,piezo-resistivestraingage,siliconeoilfill,316Lstainlesswettedmaterials,1/2”NPT(female)processconnection,displayedasshown.

P06 -14.7to30psig 831.1”wc 2068mbar 206.8KPa 2.109kg/cm2 60psig 4137mbar

P08 -14.7to100psig 2770”wc 6895mbar 689.5KPa 7.031kg/cm2 200psig 13,8bar

P10 0-5.00psig 138.5“wc 344,7mbar 34.47KPa 0.352kg/cm2 10psig 690mbar

P11 0-15.00psig 415.5“wc 1034mbar 103.4KPa 1.055kg/cm2 30psig 2068mbar

P12 0-30.00psig 831.1“wc 2068mbar 206.8KPa 2.109kg/cm2 60psig 4137mbar

P13 0-50.00psig 1385“wc 3447mbar 344.7KPa 3.516kg/cm2 100psig 6895mbar

P14 0-100.0psig 2770“wc 6895mbar 689.5KPa 7.031kg/cm2 200psig 13,8bar

P15 0-300.0psig NA 20,68bar 2068KPa 21.09kg/cm2 600psig 41,4bar

P16 0-500.0psig NA 34,47bar 3447KPa 35.16kg/cm2 1000psig 68,9bar

P17 0-1000psig NA 68,95bar 6895KPa 70.31kg/cm2 2000psig 137,9bar

P18 0-3000psig NA 206,8bar 20.68MPa 210.9kg/cm2 6000psig 413,7bar

P19 0-4500psig NA 310,3bar 31.03MPa 316.4kg/cm2 9000psig 620,5bar

P20 0-6000psig NA 413,7bar 41.37MPa 421.9kg/cm2 12000psig 827,4bar

Example:2SLP47P15-M041

w w w . u e o n l i n e . c o m 9One Series ST- B -01

ONE Series Safety Transmitter

1-Thepressurerangethatthesensorwillperformwithinspecifiedtolerances.2-Themaximumpressurethatcanbeappliedwithoutaffectingsensorperformance.3-Themaximumpressurethatcanbeappliedtobothportssimultaneouslywithoutaffectingsensorperformance.Pressureonthe“H”sensorportmustbe≥pressure onthe“L”sensorport.

Sensor PressureOperatingRange1+displayresolution

Differentialpressure,piezo-resistivestraingage,siliconeoilfill,316Lstainlesswettedmaterials,1/4”NPT(male)processconnections,displayedasshown.

K10 0-5.000psid 138.5"wc 344,7mbar 34.47KPa 0.352kg/cm2

K11 0-50.00psid 1385“wc 3447mbar 344.7KPa 3.516kg/cm2

K12 0-100.0psid 2770“wc 6895mbar 689.5KPa 7.031kg/cm2

K13 0-200.0psid NA 13,79bar 1379KPa 14.10kg/cm2

how to order cont.

Sensor TemperatureRange Description(seepage13forsensordrawings)

Temperature–4-wireRTD,100Ωplatinum,DIN0.00385,0.25”ODsensorsheath,316stainlesssteelconstruction

TL1

-40to450°F/-40to232°C(Seepage11fittingoptions)

Local(stem)mountedrigidtoenclosure,4”sheathlength

TL2 Local(stem)mountedrigidtoenclosure,6”sheathlength

TL3 Local(stem)mountedrigidtoenclosure,10”sheathlength

TR1 Remotemounted,2.5”sheath,6’MIfixedextensionlength

TRC Remotemounted,2.5”sheath,1’to30’MIextensionlengthMUSTBESPECIFIED.USEOPTIONW074ONLY.

TH1 -40to1000°F/-40to538°C(Seepage11fittingoptions)

Remotemounted,2.5”sheath,6’MIfixedextensionlength

THC Remotemounted,2.5”sheath,1’to30’MIextensionlengthMUSTBESPECIFIED.USEOPTIONW074ONLY.

TC1 -300to200°F/-184to93°C(Seepage11fittingoptions)

Remotemounted,2.5”sheath,6’MIfixedextensionlength

TCC Remotemounted,2.5”sheath,1’to30’MIextensionlengthMUSTBESPECIFIED.USEOPTIONW074ONLY.

TTC-40to900°F/-40to482°C

(Example:TTC–NUN6–L10.5)

Local(stem)spring-loadedmount,NUNconnectionlengths:4”–10”in1”increments,variablesheath(L)lengthupto60”,BOTHMUSTBESPECIFIED.Refertodrawingonpage13.Thermowellrequired,seepage11.

Thermowellsandfittingsareshownonpage11.

Sensor MaximumOverRange2 MaximumWorkingPressure3

K10 10psid 690mbar 50psig 3447mbar

K11 100psid 6895mbar 500psig 34,47bar

K12 200psid 13,8bar 1500psig 103,4bar

K13 400psid 27,6bar 1500psig 103,4bar

10 w w w . u e o n l i n e . c o m One Series ST- B -01

OPTIONCODES

M041 DualSeal-Providessecondaryprocesssealforallpressuremodels

M201 Factoryprogrammedsetpoint,deadbandandswitchmode (ForOpenonRiseorOpenonFallmodes,all3settingsarerequiredattimeofordering-seeexample below)

SetPoint1 Deadband1 SwitchMode

40.00 25.00 Openonrise

(Forwindowmodeall4settingsarerequiredattimeofordering-seeexamplebelow)

SetPointHigh1 DeadbandHigh1 SetPointLow1 DeadbandLow1

60.00 12.00 18.00 10.00

M270 Displayunits,degreesCfortemperaturemodels

M275 Displayunits,inchesofwatercolumn

M276 Displayunits,barormbar

M277 Displayunits,kPaorMPa

M278 Displayunits,kg/cm2

M444 Papertag

M446 Stainlesssteeltag

M449 Mountingbracketforpipeorwall.Usepartnumber6361-704iforderedseparately.Seepage12foradditional information.

M550 Oxygencleaningservice

W073 1/2”NPTmalecompressionfittingforusewithallTLandTRsensors,seepage8foradditionalinformation

W074 1/2”NPTmaleunionconnectorforusewithallTR,THandTCsensors

W081 Thermowelladapter-Adapts3/8"Thermowellto1/4"sensorsheath

W930 1/2”NPTmaletoG1/2maleadapterforusewithgaugepressuresensorsP06-P20.Usepartnumber6361-762if orderedseparately.

W932 1/4”NPTfemaletoG1/2maleadapterforusewithdifferentialpressuresensorsK10-K13.Usepartnumber6361- 763iforderedseparately(2required)

1Note:Fourdigitsmustbeenteredforeachsetpointanddeadband.Pleaserefertothedisplayresolutionchartonpages8&9forthecorrectnumberofdecimalplacesallowedforthesensorrangeandunitsofmeasureselected.

w w w . u e o n l i n e . c o m 11One Series ST- B -01

ONE Series Safety Transmitter

temperature sensors and fittings compatibility chart

W073 W074 W0801.77"

Ø0.250"

2.285"

Ø0.125"

2.36"

Ø0.188"

Model(Table1)W073

1/2”NPTcompressionfittingwithferruletofit0.25”sensorsheath

W0741/2”NPTunionconnectiontofit0.125”sensorextension

cable

2SLP TLx TRx,THx,TCx

3/4[19mm]

1[25.4mm]

2 1/2[63.5mm]

1/4[6.4mm]

1/2 NPT

L

P Q

U

Ø.260BORE

Ø1/2[12.7mm]

ThermowellUEPart#

Length(L)Inches

LocalTemperatureSensorsw/0.25”SensorSheath1

RemoteTemperatureSensorsw/

0.125”DiameterMICable1

P(NPT) Q U TL1(4”) TL2(6”) TL3(10”) TR,TH&TC

1S260L4-316 4 1/2 5/8 2.5 NA W073 W073 W074

1S260L4.5-316 4.5 1/2 5/8 3 NA W073 W073 W074

1S260L5.5-316 5.5 1/2 5/8 4 NA NA W073 W074

1S260L6-316 6 1/2 5/8 4.5 NA NA W073 W074

1S260L6.5-316 6.5 1/2 5/8 5 NA NA W073 W074

1S260L9-316 9 1/2 5/8 7.5 NA NA NA W074

1S260L9.5-316 9.5 1/2 5/8 8 NA NA NA W074

1S260L12-316 12 1/2 5/8 10.5 NA NA NA W074

1S260L15-316 15 1/2 5/8 13.5 NA NA NA W074

1S260L18-316 18 1/2 5/8 16.5 NA NA NA W074

1S260L24-316 24 1/2 5/8 22.5 NA NA NA W074

2S260L4-316 4 3/4 3/4 2.5 NA W073 W073 W074

2S260L6-316 6 3/4 3/4 4.5 NA NA W073 W074

2S260L9-316 9 3/4 3/4 7.5 NA NA NA W074

2S260L12-316 12 3/4 3/4 10.5 NA NA NA W074

2S260L15-316 15 3/4 3/4 13.5 NA NA NA W074

2S260L18-316 18 3/4 3/4 16.5 NA NA NA W074

2S260L24-316 24 3/4 3/4 22.5 NA NA NA W074

Note:Reference(Table1)todeterminesensorsheathdiameterorthediameteroftheMIcablebymodel

FittingsforThermowells(Table2)

0.375 REF

0.250REF

2.50REF

SENSORTHERMOWELL ADAPTER

ThermowellAdapterOptionW081 Thermowell

12 w w w . u e o n l i n e . c o m One Series ST- B -01

dimensional drawings

ENCLOSUREANDSENSORDETAILS

2" PIPE

B

11/32 WIDE SLOTS (4 PL)

B

BFOR PIPE MOUNTING ORWALL MOUNTING

PIPE MOUNTINGCLAMPS

A

B

2X, 4X, 8X ENCLOSURE,

C

C

USE

MOUNTINGSCREW(4 PL)

A

(USER SUPPLIED)

Wall or Pipe Mounting BracketOptionM449orpart#6361-704

WARNING:TheOneSeriesunitmustbesecuredtoawallorpipe.Do not use the sensor to support the instrument.ContactUETechnicalSupportat617-923-6977oremailattechsupport@ueonline.com.

8.7"[220.98mm]

5.3"[135.62mm]

1/2NPTPRESSURECONNECTION

1/8NPTBREATHERVENT

2.3"[58.42mm]

ShownwithgaugepressuresensorandDualSealoptionM041

w w w . u e o n l i n e . c o m 13One Series ST- B -01

ONE Series Safety Transmitter

4.50[114.3mm]

Ø0.250[6.4mm]

2.50[63.5mm]

L 2.00[50.8mm]

4.50[114.3mm]

Ø0.125[3.2mm]

0.50[12.7mm]

L

0.50[12.7mm]

L NUN 4.50[114.3mm]

0.25[6.35mm]

SPRINGLOAD

TL1-TL3 Sensors

Remote sensors

TTC Sensors

Ø0.250[6.4mm]

Ø0.250[6.4mm] L=60” max., NUN=4” to 10” in 1” increments

tempeRatuRe SenSORS

diFFeRentiaL pReSSuRe SenSORS

GauGe pReSSuRe SenSORS

1.06[26.9mm]

1/2”-14 NPT (FEMALE)1/4”-18 NPT (MALE)BOTH ENDS3.0

[76.2mm]

1.06[26.9mm]

dimensional drawings (continued)

14 w w w . u e o n l i n e . c o m One Series ST- B -01

Approvals & Ratings

Model N.AmericaULFile#E226592ULListed,cULCertifiedUL50,50E,1203,60079-0,60079-1,61010-1CSAC22.2No.25,30,60079-0,60079-1,61010-1

EuropeEuropeanUnionDirective94/9/EC(ATEX)EN60079-0,EN60079-1,EN60079-31

InternationalIECExSchemeIEC60079-0,IEC60079-1,IEC60079-31

2SLPExplosionproof/Flameproof

ClassI,GroupsA,B,CandD;ClassII,GroupsE,F,G;ClassIIIClassI,Zone1,AExdIICT3/T5**ClassI,Zone1,ExdIIC

Certificate#DEMKO09ATEX0813748XRev.1II2GExdIICT3/T5**II2DExtbIIICT+90°CDbIP66

Certificate#IECExUL08.0017ExdIICT3/T5**ExtbIIICT+90°CDbIP66

**T3forpressuresensorrangesP10-P16only.T5forallothermodels.Specificationssubjecttochangewithoutnotice.

w w w . u e o n l i n e . c o m 15One Series ST- B -01

ONE Series Safety Transmitter

Model N.AmericaULFile#E226592ULListed,cULCertifiedUL50,50E,1203,60079-0,60079-1,61010-1CSAC22.2No.25,30,60079-0,60079-1,61010-1

EuropeEuropeanUnionDirective94/9/EC(ATEX)EN60079-0,EN60079-1,EN60079-31

InternationalIECExSchemeIEC60079-0,IEC60079-1,IEC60079-31

2SLPExplosionproof/Flameproof

ClassI,GroupsA,B,CandD;ClassII,GroupsE,F,G;ClassIIIClassI,Zone1,AExdIICT3/T5**ClassI,Zone1,ExdIIC

Certificate#DEMKO09ATEX0813748XRev.1II2GExdIICT3/T5**II2DExtbIIICT+90°CDbIP66

Certificate#IECExUL08.0017ExdIICT3/T5**ExtbIIICT+90°CDbIP66

additional products from ue

12Series–Electro-MechanicalPressureandTemperatureSwitch

• DualsealcomplianttoANSI/ISA12.27.01• Compact,cylindrical316stainlesssteelenclosure• Hermetically-sealedSPDTorDPDTswitchoutput• Explosion-proof• Snap-actingbellevillespringmechanismtoenhancevibration

resistanceandsetpointstability• Pressurerangesto12,500psi;DPworkingpressurerangesto2500psid;

temperaturerangesto650°F

120Series–Electro-MechanicalPressureandTemperatureSwitch

• Explosion-prooflineofpressure,differentialpressure,andtemperaturemodelswithwideselectionofranges,sensorsandpressureconnections

• UL,cUL,ATEXcertifiedforhazardouslocations• Singleordualswitchoutputs• Weldedstainlesssteeldiaphragmpressuresensor• Internalorexternalsetpointadjustment

TX200SeriesHART®&ASICPressureTransmitter

• SmartTX200HoffersHART7communicationand4-20mAoutput• TX200H10:1rangeturndownhelpsreduceinventory• ASICbasedTX200offers4-20mAoutputor1-5VDCor0-10VDCoutput• Rugged316stainlesssteelconstruction,weldedandhermeticallysealed• Widevarietyofprocessconnectionsavailableforpressurerangesfrom0to15psi

Upto0to25,000psi

117Series–Electro-MechanicalPressureandTemperatureSwitch

• Singleswitchforcorrosiveandhazardousdivision2locations• Compactpressure,differentialpressureandtemperaturemodels• Hermetically-sealedSPDTandDPDTswitchoutput• Epoxy-coated,weather-tightdesignhousesstainlesssteelinternal

construction• Convenientterminalblockwiring

TemperatureSensors

RuggedRTDsandthermocouplesforprocessandenergyapplications,availablewithNema4Xandexplosion-proofheadstomatchheat-trace,turbine,combustion,andstack-emissionapplications

DUAL SEALCERTIFIED

U.S.SALESOFFICES

UnitedElectricControls 31OldStageRoad HamptonFalls,NH03844 Phone:617-899-1132 email:northeastsales@ueonline.com

UnitedElectricControls 1022VineyardDrive Conyers,GA30013 Phone:770-335-9802 email:southeastsales@ueonline.com

UnitedElectricControls 5829GrazingCourt Mason,OH45040 Phone:513-535-5486 email:midatlanticsales@ueonline.com

UnitedElectricControls 102SalazarCourt Clayton,CA94517 Phone:925-408-5997 email:westcoastsales@ueonline.com

UnitedElectricControls 27SummitTerrace Sparta,NJ07871 Phone:973-271-2550 email:easternsales@ueonline.com

UnitedElectricControls 33018WeatherbyCourt Fulshear,Texas77441 Phone:832-457-6138 email:southwestsales@ueonline.com

CANADA 68MosleyCrescent Brampton,Ontario CanadaL6Y5C8 Phone:905-455-5131 FAX:905-455-5131

180DexterAvenue,P.O.Box9143Watertown,MA02471-9143USATelephone:617926-1000Fax:617926-2568www.ueonline.com

U N I T E D E L E C T R I C C O N T R O L S

CP05125000

RECOMMENDEDPRACTICESANDWARNINGSUnitedElectricControlsCompany recommendscareful considerationof the following factors when specifying and installing UE pressureand temperature units. Before installing a unit, the Installationand Maintenance instructions provided with unit must be read andunderstood.

• Toavoiddamagingunit,proofpressureandmaximumtemperaturelimits stated in literature and on nameplates must never beexceeded,evenbysurgesinthesystem.Operationoftheunituptomaximumpressureortemperatureisacceptableonalimitedbasis(e.g.,start-up,testing)butcontinuousoperationmustberestrictedtothedesignatedadjustablerange.Excessivecyclingatmaximumpressureortemperaturelimitscouldreducesensorlife.

• A back-up unit is necessary for applications where damage toa primary unit could endanger life, limbor property. A high orlowlimitswitchisnecessaryforapplicationswhereadangerousrunawayconditioncouldresult.

• The adjustable range must be selected so that incorrect,inadvertentormalicioussettingatanyrangepointcannotresultinanunsafesystemcondition.

• Install unit where shock, vibration and ambient temperaturefluctuations will not damage unit or affect operation. Whenapplicable, orient unit so that moisture does not enter theenclosure via the electrical connection. When appropriate, thisentrypointshouldbesealedtopreventmoistureentry.

• Unitmustnotbealteredormodifiedaftershipment.ConsultUEifmodificationisnecessary.

• Monitoroperationtoobservewarningsignsofpossibledamageto unit, such as drift in set point or faulty display. Check unitimmediately.

• Preventative maintenance and periodic testing is necessary forcritical applications where damage could endanger property orpersonnel.

• Electricalratingsstatedinliteratureandonnameplatemustnotbeexceeded.Overloadonaswitchcancausedamage,evenonthefirstcycle.Wireunitaccordingtolocalandnationalelectricalcodes,usingwiresizerecommendedininstallationsheet.

• Donotmountunitinambienttemp.exceedingpublishedlimits.

LIMITEDWARRANTYSeller warrants that the product hereby purchased is, upon delivery,free from defects in material and workmanship and that any suchproduct which is found to be defective in such workmanship ormaterial will be repaired or replaced by Seller (Ex-works, Factory,Watertown, Massachusetts. INCOTERMS); provided, however, that thiswarranty applies only to equipment found to be so defective withina period of 36 months from the date of manufacture by the Seller.Seller shall not be obligated under this warranty for alleged defectswhich examination discloses are due to tampering, misuse, neglect,improper storage, and in any case where products are disassembledbyanyoneother thanauthorizedSeller’s representatives.EXCEPTFORTHE LIMITED WARRANTY OF REPAIR AND REPLACEMENT STATEDABOVE, SELLER DISCLAIMS ALL WARRANTIES WHATSOEVER WITHRESPECT TO THE PRODUCT, INCLUDING ALL IMPLIED WARRANTIESOFMERCHANTABILITYORFITNESSFORANYPARTICULARPURPOSE.

LIMITATIONOFSELLER’SLIAbILITYSELLER’SLIABILITYTOBUYERFORANYLOSSORCLAIM,INCLUDINGLIABILITY INCURRED IN CONNECTION WITH (I) BREACH OF ANYWARRANTYWHATSOEVER,EXPRESSEDORIMPLIED,(II)ABREACHOFCONTRACT,(III)ANEGLIGENTACTORACTS(ORNEGLIGENTFAILURETOACT)COMMITTEDBYSELLER,OR(IV)ANACTFORWHICHSTRICTLIABILITYWILLBEINPUTTEDTOSELLER,ISLIMITEDTOTHE“LIMITEDWARRANTY”OFREPAIRAND/ORREPLACEMENTASSOSTATEDINOURWARRANTYOFPRODUCT.INNOEVENTSHALLTHESELLERBELIABLEFORANYSPECIAL,INDIRECT,CONSEQUENTIALOROTHERDAMAGESOF A LIKE GENERAL NATURE, INCLUDING, WITHOUT LIMITATION,LOSSOFPROFITSORPRODUCTION,ORLOSSOREXPENSESOFANYNATUREINCURREDBYTHEBUYERORANYTHIRDPARTY.

UE specifications subject to change without notice.

INTERNATIONALOFFICES

CHINA UnitedElectricControls,Shanghai Office Room1011,10thFlr, HuaiHaiZhonghuaBuilding No.885,RenminRoad,LuwanDistrict Shanghai200010,P.R.China Phone:+8621-62558059 email:chinasales@ueonline.com

UnitedElectricControls,Beijing Office Room1006,JainhaoInternationalBldg. BlockD,No.116 Zizhuyuanlu,HaidianDistrict Beijing,China100089 Phone&Fax:+86-10-5893-0551 email:beijingsales@ueonline.com

EUROPE UnitedElectricControls 05-806Komorow Kujawska5,Poland Phone:+48224994804 email:easterneuropesales@ueonline.com

INDIA UnitedElectric #402,AriesAvenue-1 UnitedColony,Sama,Baroda Baroda(Gujarat),India Phone:+91(-265)-2788654 email:indiasales@ueonline.com

ASIA-PACIFIC UnitedElectricControls,FarEast No.1-2-2,2ndFloor Jalan4/101C CherasBusinessCentre 56100KualaLumpur,Malaysia Phone:603-9133-4122 email:asiapacific@ueonline.com

RUSSIA&SCANDINAVIA UnitedElectricControls,Moscow Elninskayastr.,15-140 Moscow,121552Russia Phone:+7(495)792-88-06 email:russiansales@ueonline.com

Besuretovisitwww.ueonline.comforthelatestinformationregardingtheOne Series.16