13
66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specific pressing tongs Mini / pressing rings for all common press fitting systems. Driven by ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC. Read and follow the installation and assembly instructions of the system provider/manufacturer. Very compact design and low weight of the ROLLER’S pressing tongs due to the special arrangement of the pressing tongs connection (Patent EP 1 952 948). Recesses in the pressing jaws for safe guidance of the connecting lugs for offset-free pressing (Patent EP 2 347 862). Choose your own pressing tongs Mini / pressing rings! Just select the desired pressfitting system and pressing tongs size / pressing ring size in the table on pages 67 – 78. Please note that press- fitting systems for gas installation may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Precisely worked and exactly rounded, system-specific press contour according to the respective pressfitting system for perfectly system- conformant, reliable pressing. Drop-forged, for maximum quality demands. Specially hardened function parts for long life. Confirmations of suitability see page 38. SHK liability acceptance agreements see page 39. Traceability according to EN 1775:2007. ROLLER’S pressing tongs Mini with press contour F, M, V, SA, B, RN and UP have worked a specific marking in the press contour which leaves a lasting impression directly on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs Mini have been used to make the pressfit connection even after the pressing process. With this traceability ROLLER fulfils the recommendation of the European standard EN 1775:2007 for the installation of pressfitting systems for gas. ROLLER’S pressing tongs Mini ROLLER’S pressing rings German Top Quality Patent EP 1 952 948 Patent EP 2 347 862 Example: ROLLER’S Mini V pressing tongs: Impression “M” on pressed fitting for traceability according to EN 1775:2007 B ACz HE F G H HA KI K M MT RFz RN SA TH U UP US V VX VAU VUS VIC VP VRX

pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

66

Pip

e p

res

sin

g t

ec

hn

olo

gy Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC:

System-specifi c pressing tongs Mini / pressing ringsfor all common press fi tting systems.

• Driven by ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC. Read and follow the installation and assembly instructions of the system provider/manufacturer.

• Very compact design and low weight of the ROLLER’S pressing tongs due to the special arrangement of the pressing tongs connection (Patent EP 1 952 948).

• Recesses in the pressing jaws for safe guidance of the connecting lugs for offset-free pressing (Patent EP 2 347 862).

• Choose your own pressing tongs Mini / pressing rings! Just select the desired pressfi tting system and pressing tongs size / pressing ring size in the table on pages 67 – 78. Please note that press-fi tting systems for gas installation may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table.

• Precisely worked and exactly rounded, system-specifi c press contour according to the respective pressfi tting system for perfectly system-conformant, reliable pressing.

• Drop-forged, for maximum quality demands.

• Specially hardened function parts for long life.

• Confi rmations of suitability see page 38.

• SHK liability acceptance agreements see page 39.

Traceability according to EN 1775:2007.

• ROLLER’S pressing tongs Mini with press contour F, M, V, SA, B, RN and UP have worked a specifi c marking in the press contour which leaves a lasting impression directly on the pressed fi tting after the pressing process. This enables the user to check again whether the most suitable pressing tongs Mini have been used to make the pressfi t connection even after the pressing process.

• With this traceability ROLLER fulfi ls the recommendation of the European standard EN 1775:2007 for the installation of pressfi tting systems for gas.

ROLLER’S pressing tongs MiniROLLER’S pressing rings

German Top QualityGerman Top Quality

Patent EP 1 952 948Patent EP 2 347 862

Example: ROLLER’S Mini V pressing tongs: Impression “M” on pressed fi tting for traceability according to EN 1775:2007

B

ACz

HE

F

G

H

HA

KI

K

M

MT

RFz

RN

SA

TH

U

UP

US

V

VX

VAU

VUS

VIC

VP

VRX

Page 2: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

67

Pip

e p

res

sin

g te

ch

no

log

yP

ipe

pre

ss

ing

tec

hn

olo

gy

Pip

e p

res

sin

g te

ch

no

log

yAC-FIX PRESS H 12 578396(Global Piping H 16 578400Systems) H 20 578406

H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382VX 16 578552VX 20 578554

AC-FIX H 16 578400PRESS-MULTI H 18 578404(Global Piping H 20 578406Systems) H 25 578408

H 32 578412RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382

ACOME MT ACz 12 578608ACz 16 578610ACz 20 578612ACz 25 578614

AHLSELL M 12 578310A-press M 15 578312elförzinkad M 18 578314

M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

AHLSELL V 12 578324A-press koppar V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

AHLSELL M 15 578312A-press rostfritt M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

AIRBEL M 15 578312PRESSCLIM M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

AIRBEL M 15 578312SERTINOX M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

ALB TH 16 578352Sistema Multicapa TH 18 578356

TH 20 578358TH 26 578362TH 32 578364TH 40 578624H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378C 26 578392U 32 578382U 40 578386

APE Serie AP B 16 578468B 20 578472B 26 578474B 32 578476H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 40 578386

APE Serie AP TH 16 578352Gas TH 20 578358

TH 26 578362TH 32 578364

AQUATECHNIK B 16 578468Universal B 20 578472

B 26 578474B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378C 26 578392U 32 578382

ASCHL NIR M 15 578312M 18 578314M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

ASTM F 1807 US ⅜" 578534(Fittings with US ½" 578536Copper Crimp US ¾" 578538Ring for PEX US 1" 578540tubing)tubing)Bampi BALPEX TH 14 578348(serie MP) TH 16 578352

TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Bampi BALPEX TH 16 578352Gas TH 20 578358

TH 26 578362BARBI H 12 578396EASYPRESS H 16 578400(Industrial Blansol)H 20 578406

H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382

BARBI H 14 578398MULTIPEX H 16 578400(Industrial Blansol)H 18 578404

H 20 578406H 25 578408H 26 578410H 32 578412RFz 16 578492RFz 18 578638RFz 20 578494RFz 25 578496RFz 32 578498TH 16 578352TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

BEGETUBE/ B 14 578466IVAR B 16 578468

B 18 578470B 20 578472B 26 578474B 32 578476

BRASELI RFz 16 578492Pressfi tting PE-X RFz 20 578494

RFz 25 578496RFz 32 578498

BRASELI U 16 578374Pressfi tting U 18 578376Multicapa U 20 578378

U 25 578380U 32 578382U 40 578386

Brass Form H 16 578400Press Form H 18 578404Pex H 20 578406

TH 16 578352TH 18 578356TH 20 578358U 16 578374U 18 578376U 20 578378

Brass Form H 16 578400Press Form H 18 578404Pex-Al-Pex H 20 578406

TH 16 578352TH 18 578356TH 20 578358U 16 578374U 18 578376U 20 578378

Brass & Fittings RFz 16 578492Pressman RFz 18 578638Multicapa ACz 20 578612

RFz 25 578496RFz 32 578498

Brass & Fittings RFz 16 578492Retipress RFz 18 578638

ACz 20 578612RFz 25 578496RFz 32 578498

BRASSTECH H 16 578400MULTItermoSAN H 18 578404Brasspress H 20 578406

H 26 578410TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 18 578376U 20 578378

Business Key M 15 578312MT-PRESS M 18 578314(inox) M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Cello Products VUS ½" (OD 15,9 mm)VUS ½" (OD 15,9 mm)VUS ½" 578566<B>Press VUS ¾" (OD 22,2 mm)VUS ¾" (OD 22,2 mm)VUS ¾" 578568

VUS 1" (OD 28,6 mm) 578570VUS 1¼" (OD 34,9 mm) (OD 34,9 mm)VUS 1¼" (OD 34,9 mm)VUS 1¼" 578606

CHIALI TH 16 578352CHIALIPEX TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Climatek TH 14 578348Clima Therm TH 16 578352

TH 18 578356TH 20 578358TH 26 578362TH 32 578364

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfi tting systems for gas installations may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2st quarter of 2008), “208” (2st nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd

2) For accommodating suitable pressing inserts.3) Adaptor tongs, see page 78, are necessary for driving the pressing rings (PR).Suitability of the ROLLER’S pressing tools for pressfi tting systems: Status 09.10.2015. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fi tting systems on request.

Page 3: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

68

Pip

e p

res

sin

g t

ec

hn

olo

gy

Climatrix H 16 578400Climatrix Rhinopex H 20 578406

U 16 578374U 20 578378TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364

ClouSet TH 16 578352TH 18 578356TH 20 578358

COMAP V 12 578324SudoPress CarbonV 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604

Comap V 12 578324SudoPress CopperV 14 578326

V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

Comap V 12 578324SudoPress V 14 578326Copper Gas V 15 578328

V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

COMAP V 14 578326SudoPress V 15 578328Copper Solar V 16 578330

V 18 578332V 22 578334

COMAP V 15 578328SudoPress V 18 578332Stainless V 22 578334

V 28 578336V 35 578604

Comap RFz 12 578490PexPress RFz 16 578492

RFz 20 578494RFz 25 578496

Comap TH 14 578348SkinPress TH 16 578352

TH 18 578356TH 20 578358TH 26 578362THL 32 578368TH 40 578624

Comap TH 16 578352SkinPress Gas TH 20 578358

TH 26 578362THL 32 578368

Comap TH 16 578352SkinPress PPSU TH 20 578358

TH 26 578362THL 32 578368

COMAP M 12 578310Xpress Carbon M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

COMAP M 12 578310Xpress Copper M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

COMAP M 15 578312Xpress Copper M 181) 578314Gas M 22 578316

M 281) 578318M 35 578390

COMAP M 15 578312Xpress Stainless M 181) 578314

M 22 578316M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

COMISA TH 14 578348Press System TH 16 578352

TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412B 14 578466B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476

COMISA TH 16 578352Press System GasTH 20 578358

TH 26 578362TH 32 578364

CONEL F 16 578456CONNECT F 20 578460MULTI F 26 578462

F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

(DN 26) U 25 578380U 32 578382VP 16 578482VP 20 578484VP 32 578488

DIWAsystems TH 14 578348TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624

DUOFIL U 16 578374MKSYSTEM U 18 578376

U 20 578378U 25 578380U 32 578382

DW Verbundrohr U 16 578374multitubo systems U 18 578376

U 20 578378U 25 578380U 32 578382

EBRILLE U 16 578374Isomonfl ex U 18 578376

U 20 578378U 25 578380H 26 578410TH 26 578362U 32 578382

EBRILLE U 14 578372Monfl ex U 16 578374

U 18 578376U 20 578378U 25 578380H 26 578410TH 26 578362U 32 578382U 40 578386

EFFEBI M 15 578312PRESSTIGE M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

EFFEBI TOF TH 16 578352MULTIPINZA TH 18 578356

TH 20 578358TH 26 578362TH 32 578364TH 40 578624F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476

Elkhart VUS ½" (OD 15,9 mm)VUS ½" (OD 15,9 mm)VUS ½" 578566APOLLOXPRESS VUS ¾" (OD 22,2 mm)VUS ¾" (OD 22,2 mm)VUS ¾" 578568Fittings Copper VUS 1" (OD 28,6 mm) 578570and Low-Lead VUS 1¼" (OD 34,9 mm)VUS 1¼" (OD 34,9 mm)VUS 1¼" 578606BrassEMMETI B 16 578468GERPEX- B 20 578472FIVPRESS B 26 578474

B 32 578476F 16 578456F 20 578460H 16 578400H 20 578406TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378

EMPUR TH 15 578350TH 17 578354TH 20 578358

EURACCORDI M 15 578312SYCPRESS M 18 578314STAINLESS M 22 578316STEEL PRESS M 28 578318FITTINGS M 35 578390

M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

EURACCORDI M 15 578312SYCPRESS M 18 578314CARBON STEEL M 22 578316PRESS FITTINGSM 28 578318

M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

EUROTUBI M 12 578310Europa C-STAHL M 15 578312PRESSFITTING M 18 578314SISTEM1) M 22 578316

M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

EUROTUBI M 15 578312Europa INOX M 18 578314PRESSFITTING M 22 578316SISTEM1) M 28 578318

M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

Evans VAU 15 (½") 578630Components VAU 20 (¾") 578632Presslok VAU 25 (1") 578634

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs Mini / pressing rings Accessory for ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC

Page 4: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

69

Pip

e p

res

sin

g te

ch

no

log

yFAR Rubinetterie TH 14 578348PRESSFAR TH 16 578352

TH 17 578354TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

F.B.Q. BARONIO V 12 578324BQ press V 14 578326

V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 14 45° (PR-2B)3) 574532 R574532 R574532V 15 45° (PR-2B)3) 574504 R

V 16 45° (PR-2B)3) 574534 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

F.B.Q. BARONIO V 15 578328BQ press V 18 578332carbon steel V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

F.B.Q. BARONIO V 15 578328BQ press gas V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

Fercofl oor RFz 16 578492DUO Press RFz 20 578494FERCO PEX RFz 25 578496

RFz 32 578498Fercofl oor RFz 16 578492DUO Press RFz 20 578494MULTIFER RFz 25 578496

RFz 32 578498U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382

FILTUBE M 15 578312Instalpress M 18 578314Carbon Steel M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

FILTUBE M 15 578312Instalpress M 18 578314Copper M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

FILTUBE M 15 578312Instalpress M 18 578314Inox M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

Fittings Estándar RFz 16 578492ECO-PRESS RFz 20 578494

RFz 25 578496RFz 32 578498

Fittings Estándar RFz 16 578492MULTICAPA RFz 18 578638

RFz 20 578494RFz 25 578496RFz 32 578498

Fittings Estándar RFz 16 578492PE-X RFz 20 578494

RFz 25 578496RFz 32 578498

FOHS TH 16 578352HEIZTECHNIK TH 20 578358FOHSPRESS TH 26 578362

TH 32 578364FORNARA B 16 578468ForPress B 20 578472

B 26 578474B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382

FRABO V 12 578324FRABOPRESS V 15 578328RAME (Cu) V 18 578332

V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

FRABO V 12 578324FRABOPRESS V 15 578328RAME (Cu) V 18 578332

V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

FRABO V 12 578324FRABOPRESS V 15 578328INOX 316 V 18 578332

V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

FRABO V 15 578328FRABOPRESS V 18 578332C-STEEL V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

FRABO V 15 578328FRABOPRESS V 18 578332C-STEEL GAS V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

FRABO TH 16 578352FRABOPRESS TH 20 578358MULTI-BRASS TH 26 578362(MB) TH 32 578364

U 16 578374U 20 578378

FRABO H 16 578400FRABOPRESS H 20 578406MULTI-PLUS U 16 578374(MP) U 20 578378FRABO V 15 578328SOLARPRESS V 18 578332

V 22 578334V 28 578336V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510

Fränkische B 16 578468alpex-duo B 18 578470

B 20 578472B 26 578474B 32 578476F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364

Fränkische F 16 578456alpex F50 PROFI F 20 578460

F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

(DN 26) U 25 578380U 32 578382VP 16 578482VP 20 578484VP 32 578488

Fränkische F 20 578460alpex-gas F 26 578462

F 32 578464Fränkische F 40 578478alpex Lgabotherm H+S TH 10 578342

TH 12 578346TH 14 578348TH 15 578350TH 16 578352TH 17 578354TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624

Geberit Mapress M 12 578310C-STAHL M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfi tting systems for gas installations may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2st quarter of 2008), “208” (2st nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd

2) For accommodating suitable pressing inserts.3) Adaptor tongs, see page 78, are necessary for driving the pressing rings (PR).Suitability of the ROLLER’S pressing tools for pressfi tting systems: Status 09.10.2015. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fi tting systems on request.

Page 5: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

70

Pip

e p

res

sin

g t

ec

hn

olo

gy ROLLER’S pressing tongs Mini / pressing rings

Geberit Mapress M 12 578310EDELSTAHL M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Geberit Mapress M 15 578312EDELSTAHL Gas M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Geberit Mapress M 12 578310KUPFER M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Geberit Mapress M 15 578312KUPFER Gas M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Geberit Mepla G 16 578444G 20 578446G 26 578448G 32 578450G 40 578452

General Fittings TH 16 578352Serie 5S00 TH 18 578356

TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 16 578400H 18 578404H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 32 578382U 40 578386B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476

General Fittings TH 16 578352Trident TH 20 578358

TH 26 578362TH 32 578364H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

General Fittings TH 16 578352Trident Gas TH 20 578358

TH 26 578362TH 32 578364H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382

Giacomini H 16 578400Raccordi RM H 20 578406Giacomini H 26 578410

H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364THL 32 578368U 16 578374U 20 578378U 32 578382U 40 578386

Giacomini H 16 578400RM MULTIGAS H 20 578406

H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364THL 32 578368U 16 578374U 20 578378U 32 578382

Giacomini V 15 578328Valvole Giacomini V 18 578332serie R850V V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512SA 15 578514SA 18 578518SA 22 578520SA 28 578522M 15 578312M 18 578314M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Golan Pipe U 16 578374Systems U 20 578378(Scandinavia) U 25 578380Alu-Pres U 32 578382

U 40 578386Grinnell G-PRESSVUS ½" (OD 15,9 mm)VUS ½" (OD 15,9 mm)VUS ½" 578566Copper Fittings VUS ¾" (OD 22,2 mm)VUS ¾" (OD 22,2 mm)VUS ¾" 578568

VUS 1" (OD 28,6 mm) 578570VUS 1¼" (OD 34,9 mm) (OD 34,9 mm)VUS 1¼" (OD 34,9 mm)VUS 1¼" 578606

GS TH 14 578348Wärmesysteme TH 16 578352System TH TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

GS V 15 578328Wärmesysteme V 18 578332System V V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

GSP Group U 16 578374USMetrix U 20 578378HAGOS TH 16 578352HakaGerodur TH 10 578342HakaGerodur- TH 11,6 578344System TH 12 578346

TH 14 578348TH 16 578352TH 17 578354TH 18 578356TH 20 578358

HakaGerodur TH 16 578352HAKASAN TH 20 578358

TH 25 578360TH 26 578362TH 32 578364TH 40 578624

Harden 2000 TH 16 578352B-Hidro TH 20 578358

TH 26 578362Harden 2000 TH 14 578348Poly-Pex 2000 TH 16 578352

TH 17 578354TH 18 578356TH 20 578358TH 26 578362THL 32 578368TH 40 578624

Harden 2000 TH 16 578352Poly-Pex Gas TH 20 578358

TH 26 578362THL 32 578368

HASTINIK M 15 578312Hastinik/Hitpress M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

heima-press TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624

HELIROMA U 16 578374klimapress U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

HELIROMA RFz 16 578492romapress RFz 20 578494

RFz 25 578496RFz 32 578498

Henco TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362

Henco Gas TH 16 578352TH 20 578358TH 26 578362

Herotec H 16 578400TEMPUS-PRESS H 20 578406PLUS H 25 578408

H 32 578412TH 16 578352TH 20 578358TH 25 578360TH 32 578364U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386

Herz pipefi x TH 10 578342TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624

HITEC Sistema TH 14 578348Multistrato TH 16 578352

TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Hopewell M 15 578312press fi t system M 18 578314

M 22 578316M 28 578318M 35 578390

hp-praski TH 10 578342BAVARIA-press TH 14 578348

TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624

IBP >B< Flex U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382

IBP >B< Press V 12 578324V 14 578326V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 14 45° (PR-2B)3) 574532 R574532 R574532V 15 45° (PR-2B)3) 574504 R

V 16 45° (PR-2B)3) 574534 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

IBP >B< Press V 12 578324Carbon V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

IBP >B< Press V 15 578328Gas V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

IBP >B< Press V 15 578328Inox V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

IBP >B< Press V 15 578328Solar V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Idrosanitaria TH 16 578352Bonomi TH 20 578358HomegasHomegas TH 26 578362

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Accessory for ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC

Page 6: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

71

Pip

e p

res

sin

g te

ch

no

log

yIdrosanitaria TH 16 578352Bonomi TH 18 578356Idropress TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

IDROSISTEMI TH 16 578352Ta-Press TH 20 578358

TH 26 578362TH 32 578364TH 40 578624F 16 578456F 20 578460F 26 578462F 32 578464F 40 578478H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382U 40 578386B 16 578468B 20 578472B 26 578474B 32 578476

IPA IPANA Press TH 10 578342TH 11,6 578344TH 12 578346TH 14 578348TH 15 578350TH 16 578352TH 17 578354TH 18 578356TH 20 578358TH 22 578588TH 25 578360TH 26 578362TH 28 578590TH 32 578364TH 40 578624

IPA THu TH 16 578352IPANA Press TH 20 578358

TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378H 16 578400H 20 578406H 26 578410H 32 578412

IPALPEX TH 14 578348(Industrie du TH 16 578352Plastique et TH 18 578356Accessoires) TH 20 578358

TH 26 578362THL 32 578368TH 40 578624

IPLEX K16/P18 578592PIPELINESAUSTRALIAIplex Pro-fi tIplex Pro-fi tIPLEX K16/P18 578592PIPELINES K/20 578594AUSTRALIA K/25 578596Iplex K1 K32 578598(Gas)(Gas) K1/40 578600IPLEX K16/P18 578592PIPELINES K/20 578594AUSTRALIA K/25 578596Iplex K2Iplex K2ISOTUBI M 15 578312NUMEPRESS M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

IVAR B 20 578472ALPEX-GAS B 26 578474

B 32 578476IVAR B 14 578466Ivar-Press B 16 578468

B 18 578470B 20 578472B 26 578474B 32 578476F 40 578478

IVAR TH 16 578352MULTI PRESS TH 20 578358GAS TH 26 578362

TH 32 578364B 16 578468B 20 578472B 26 578474B 32 578476

IVAR TH 16 578352MULTI PRESS TH 20 578358GAS ITALIA TH 26 578362

H 16 578400H 20 578406H 26 578410

IVAR TH 16 578352Multi Press MP TH 18 578356

TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464F 40 578478H 16 578400H 18 578404H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476

IVAR TH 16 578352Multi Press Leak TH 20 578358(MPL) TH 26 578362

TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

IVAR TH 16 578352Plastic Multi Press TH 20 578358PMP TH 25 578360

TH 26 578362TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 20 578378U 25 578380C 26 578392U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

IVAR TH 16 578352Plastic Multi Press TH 20 578358Leak (PMPL) TH 26 578362

TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

Jäger - Aquatec H 14 578398Aquapress H H 16 578400

H 17 578402H 18 578404H 20 578406H 26 578410H 32 578412U 40 578386

Jäger - Aquatec M 15 578312C-Stahl - Press M 18 578314Typ M M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Jäger - Aquatec M 15 578312Edelstahl - Press M 18 578314Typ M M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Jäger - Aquatec V 15 578328Kufper - Press V 18 578332Typ V V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Jansen TH 14 578348JANSEN prima TH 16 578352

TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624

Jarafl ex- TH 14 578348Presssystem TH 16 578352

TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624

KAN U 16 578374KAN-therm U 20 578378

U 25 578380C 26 578392U 32 578382U 40 578386

KAN TH 14 578348KAN-therm LBP TH 16 578352

TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624U 14 578372U 16 578374U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386

KAN M 15 578312KAN-therm M 181) 578314Inox M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

KAN M 15 578312KAN-therm M 181) 578314Steel M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

KE KELIT U 16 578374KELIT KELOX U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

KE KELIT M 15 578312steelFIX M 18 578314C-Stahl M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfi tting systems for gas installations may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2st quarter of 2008), “208” (2st nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd

2) For accommodating suitable pressing inserts.3) Adaptor tongs, see page 78, are necessary for driving the pressing rings (PR).Suitability of the ROLLER’S pressing tools for pressfi tting systems: Status 09.10.2015. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fi tting systems on request.

Page 7: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

72

Pip

e p

res

sin

g t

ec

hn

olo

gy

KE KELIT M 15 578312steelFIX M 18 578314Edelstahl M 22 578316

M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

KEMBLA VAU 15 (OD 12,7 mm)VAU 15 (OD 12,7 mm)VAU 15 578630KemPress VAU 20 (OD 19,1 mm)VAU 20 (OD 19,1 mm)VAU 20 578632(AUS) VAU 25 (OD 25,4 mm)VAU 25 (OD 25,4 mm)VAU 25 578634

VAU 32 (OD 31,8 mm)VAU 32 (OD 31,8 mm)VAU 32 578636KEMBLA VAU 15 (OD 12,7 mm)VAU 15 (OD 12,7 mm)VAU 15 578630KemPress Gas VAU 20 (OD 19,1 mm)VAU 20 (OD 19,1 mm)VAU 20 578632(AUS) VAU 25 (OD 25,4 mm)VAU 25 (OD 25,4 mm)VAU 25 578634

VAU 32 (OD 31,8 mm)VAU 32 (OD 31,8 mm)VAU 32 578636KISAN KI 16 578524Kisan KD KI 20 578526

KI 25 578528TH 16 578352TH 20 578358TH 25 578360

KISAN KI 16 578524Kisan WL KI 20 578526

KI 25 578528KI 32 578530TH 16 578352TH 20 578358TH 25 578360TH 32 578364

KISAN KI 16 578524Kisan WM KI 20 578526

KI 25 578528KI 32 578530

KISAN U 20 578378Kisan WR U 25 578380

U 32 578382U 40 578386

KISAN M 15 578312Kistal C M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

KISAN M 15 578312Kistal Inox M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

KME TH 14 578348cuprotherm CTX TH 16 578352

TH 18 578356TH 20 578358TH 26 578362

KME TH 14 578348QTEC - Comap TH 16 578352SkinPress TH 20 578358

TH 26 578362KME H 16 A 578420QTEC - Oventrop H 20 A 578426Cofi t H 26 A 578430LECHAR TH 16 578352ALCOBRAPEX TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

LECHAR U 16 578374COBRAPEX U 20 578378

U 25 578380U 32 578382

LEGEND-PRESS VUS ½" (OD 15,9 mm)VUS ½" (OD 15,9 mm)VUS ½" 578566press fi tting VUS ¾" (OD 22,2 mm)VUS ¾" (OD 22,2 mm)VUS ¾" 578568system VUS 1" (OD 28,6 mm) 578570

VUS 1¼" (OD 34,9 mm)VUS 1¼" (OD 34,9 mm)VUS 1¼" 578606LK Systems V 12 578324LK >B<Press V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

LK Systems V 12 578324LK >B<Press V 15 578328Elförzinkat V 18 578332

V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

LK Systems V 15 578328LK >B<Press V 18 578332Gas V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

LK Systems TH 16 578352LK Universal TH 20 578358

TH 25 578360TH 32 578364TH 40 578624

LVI-DAHL U 16 578374Altech-Alupex U 20 578378

U 25 578380U 32 578382

MAINCOR U 16 578374MAINPRESS U 20 578378

U 25 578380U 32 578382

MAINCOR U 16 578374MAINFLOR U 20 578378MAINCOR M 15 578312MAINOX M 18 578314

M 22 578316M 28 578318

Mair Heiztechnik M 12 578310Gomafi x Cu/E1) M 15 578312

M 18 578314M 22 578316M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)M 22 45° (PR-2B)3) 574526 R574526 R574526Mair Heiztechnik H 11,5 578394Gomafi x M H 14 578398

H 16 578400H 20 578406

Mair Heiztechnik H 11,5 578394M-Press H 14 578398

H 16 578400H 20 578406H 26 578410H 32 578412

Ma.s.ter System TH 14 578348PRESSMASTER TH 16 578352

TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

MEGARO H 11,5 578394HAKAPRESS H 14 578398

H 16 578400H 17 578402H 18 578404H 20 578406H 26 578410H 32 578412

MEGARO B 16 578468MEGAPRESS B 20 578472

B 26 578474B 32 578476F 40 578478

MEGARO TH 16 578352MEGAPRESS MP TH 20 578358

TH 26 578362TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464F 40 578478H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

MEGARO TH 16 578352MEGAPRESS TH 20 578358MPL TH 26 578362

TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464F 40 578478H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476

METALGRUP RFz 16 578492PexGrup RFz 20 578494

RFz 25 578496RFz 32 578498

METALGRUP U 16 578374MultiGrup U 18 578376

U 20 578378U 25 578380U 32 578382

MULTITHERM TH 16 578352PRESSSYSTEM TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Multicapas RFz 16 578492Industrial RFz 20 578494AIS PEX RFz 25 578496

RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382

Multicapas MT 20 578560Industrial MT 25 578562multitubo systems MT 32 578564MC U 16 578374

U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386

Multicapas H 16 578400Industrial H 20 578406multitubo systems H 25 578408MM H 26 578410

H 32 578412MT 20 578560MT 25 578562MT 32 578564RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498TH 16 578352TH 20 578358TH 25 578360TH 26 578362TH 32 578364U 16 578374U 20 578378U 25 578380U 32 578382

Multi-Flex ACR H 12 (¼") 578396U 14 (⅜") 578372U 16 (½") 578374U 18 (⅝") 578376U 20 (¾") 578378U 25 (⅞") 578380U 32 (1⅛")U 32 (1⅛") 578382

Multi-Flex Gas U 16 (½") 578374U 20 (⅝") 578378U 25 (¾") 578380U 32 (1") 578382U 40 (1¼")U 40 (1¼") 578386

Multi-Flex Water U 16 (½") 578374U 25 (¾") 578380U 32 (1") 578382U 40 (1¼")U 40 (1¼") 578386

NEUTHERM H 16 578400MEKUPRESS-HT H 20 578406

H 26 578410H 32 578412

NIBCO (USA) VUS ½" (OD 15,9 mm)VUS ½" (OD 15,9 mm)VUS ½" 578566Press System VUS ¾" (OD 22,2 mm)VUS ¾" (OD 22,2 mm)VUS ¾" 578568Copper VUS 1" (OD 28,6 mm) 578570

VUS 1¼" (OD 34,9 mm)VUS 1¼" (OD 34,9 mm)VUS 1¼" 578606Nicoll Fluxo TH 16 578352

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

NUPIGECO U 14 578372Multinupi U 16 578374

U 18 578376U 20 578378C 26 578392U 32 578382U 40 578386

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs Mini / pressing rings Accessory for ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC

Page 8: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

73

Pip

e p

res

sin

g te

ch

no

log

yNUPIGECO B 16 578468Multipinza B 18 578470

B 20 578472B 26 578474B 32 578476F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 16 578374U 18 578376U 20 578378C 26 578392U 32 578382

Nussbaum VP 16 578482Optifl ex Press VP 20 578484

VP 25 578486VP 32 578488

Nussbaum V 15 578328Optipress V 18 578332Aquaplus V 22 578334

V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Nussbaum V 15 578328Optipress Gaz V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Nussbaum V 15 578328Optipress-Therm V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

O.M.T. - Press TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Oventrop Cofi t P H 16 A 578420H 20 A 578426H 26 A 578430H 32 A 578432

PBTub RFz 12 578490SERTIPRESS RFz 16 578492

RFz 20 578494RFz 25 578496

PBTub M 15 578312SERTI-STEEL1) M 18 578314

M 22 578316M 28 578318M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)M 28 45° (PR-2B)3) 574528 R574528 R574528

Pegler Yorkshire TH 14 578348Henco Multilayer TH 16 578352Solutions TH 18 578356

TH 20 578358TH 26 578362

Pegler Yorkshire M 12 578310XPress Carbon M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Pegler Yorkshire M 12 578310XPress Copper M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Pegler Yorkshire M 15 578312XPress Copper M 181) 578314Gas M 22 578316

M 281) 578318M 35 578390

Pegler Yorkshire M 15 578312XPress Solar M 181) 578314

M 22 578316M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Pegler Yorkshire M 15 578312XPress M 181) 578314Stainless M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Pegler Yorkshire M 15 578312XPress Stainless M 181) 578314Gas M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

PERFEXIM U 16 578374"PERFEKT U 20 578378SYSTEM" U 25 578380

U 32 578382PERFILTUBO U 16 578374PERFILALUPEX U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

PERFILTUBO M 15 578312PERFILPRESS M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

PEXTUBE RFz 16 578492PexTube RFz 20 578494

RFz 25 578496RFz 32 578498

Pipelife M 15 578312C-PRESS M 18 578314

M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Pipelife TH 16 578352RADOPRESS TH 18 578356

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Pipetec Connect TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624

PLASTICA ALFA H 16 578400Multypex H 20 578406

H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypex H 20 578406Air H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypexalfa Gas H 20 578406

H 26 578410PLASTICA ALFA H 16 578400Multypexalfa Gas H 20 578406protekprotek H 26 578410PLASTICA ALFA H 16 578400Multypex H 20 578406Plus H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypex H 20 578406Thermo H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLASTICA ALFA H 16 578400Multypex H 20 578406Thermo Plus H 26 578410

H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382

PLÁSTICOS TH 16 578352FERRO TH 20 578358FERROPLAST TH 25 578360GPF GAS TH 32 578364PLÁSTICOS RFz 16 578492FERRO RFz 20 578494FERROPLAST RFz 25 578496Pressfi tting PE-XPressfi tting PE-X RFz 32 578498PLUMBING PLUS K16/P18 578592EziPex Crimp K/20 578594(AUS) K/25 578596

K32 578598K1/40 578600

PLUMBING PLUS K16/P18 578592EziPex Gas K/20 578594(AUS) K/25 578596

K32 578598K1/40 578600

PLUMBING PLUS VAU 15 (OD 12,7 mm)VAU 15 (OD 12,7 mm)VAU 15 578630EziPress Gas VAU 20 (OD 19,1 mm)VAU 20 (OD 19,1 mm)VAU 20 578632(AUS) VAU 25 (OD 25,4 mm)VAU 25 (OD 25,4 mm)VAU 25 578634

VAU 32 (OD 31,8 mm)VAU 32 (OD 31,8 mm)VAU 32 578636PLUMBING PLUS VAU 15 (OD 12,7 mm)VAU 15 (OD 12,7 mm)VAU 15 578630EziPress Solar VAU 20 (OD 19,1 mm)VAU 20 (OD 19,1 mm)VAU 20 578632(AUS)(AUS) VAU 25 (OD 25,4 mm)VAU 25 (OD 25,4 mm)VAU 25 578634PLUMBING PLUS VAU 15 (OD 12,7 mm)VAU 15 (OD 12,7 mm)VAU 15 578630EziPress Water VAU 20 (OD 19,1 mm)VAU 20 (OD 19,1 mm)VAU 20 578632(AUS) VAU 25 (OD 25,4 mm)VAU 25 (OD 25,4 mm)VAU 25 578634

VAU 32 (OD 31,8 mm)VAU 32 (OD 31,8 mm)VAU 32 578636POLYPIPE F 16 578456POLYPRESS F 20 578460

F 26 578462F 32 578464F 40 578478

POLYPIPE TH 10 578342POLYSURE TH 15 578350

TH 22 578588TH 28 578590

POLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) M 35 578390POLYSAN- M 15 45° (PR-2B)3) 574522 R574522 R574522C Stahl-Press- M 18 45° (PR-2B)3) 574524 R

System M M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

POLYSAN V 15 578328Handelsges. V 18 578332m.b.H. & Co KG V 22 578334(Krems/Öster- V 28 578336reich) V 35 578604POLYSAN- V 15 45° (PR-2B)3) 574504 R

C Stahl-Press- V 18 45° (PR-2B)3) 574506 R574506 R574506System V V 22 45° (PR-2B)3) 574508 R574508 R574508

V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

POLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) M 35 578390POLYSAN- M 15 45° (PR-2B)3) 574522 R574522 R574522Edelstahl M 18 45° (PR-2B)3) 574524 R

Press-System M 22 45° (PR-2B)3) 574526 R574526 R574526Gas M 28 45° (PR-2B)3) 574528 R574528 R574528

M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfi tting systems for gas installations may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2st quarter of 2008), “208” (2st nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd

2) For accommodating suitable pressing inserts.3) Adaptor tongs, see page 78, are necessary for driving the pressing rings (PR).Suitability of the ROLLER’S pressing tools for pressfi tting systems: Status 09.10.2015. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fi tting systems on request.

Page 9: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

74

Pip

e p

res

sin

g t

ec

hn

olo

gy

POLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) M 35 578390POLYSAN- M 15 45° (PR-2B)3) 574522 R574522 R574522Edelstahl M 18 45° (PR-2B)3) 574524 R

Press-System M 22 45° (PR-2B)3) 574526 R574526 R574526Wasser M 28 45° (PR-2B)3) 574528 R574528 R574528

M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530POLYSAN TH 14 578348Handelsges. TH 16 578352m.b.H. & Co KG TH 17 578354(Krems/Öster- TH 18 578356reich) TH 20 578358POLYSAN- TH 26 578362Press-System TH 32 578364

TH 40 578624POLYSAN TH 14 578348Handelsges. TH 16 578352m.b.H. & Co KG TH 17 578354(Krems/Öster- TH 18 578356reich) TH 20 578358POLYSAN-Henco- TH 26 578362Press-SystemPOLYSAN U 16 578374(España) U 18 578376Rainbow U 20 578378

U 25 578380U 32 578382U 40 578386

Prandelli H 14 578398Multyrama Pf H 16 578400

H 18 578404H 20 578406H 26 578410H 32 578412

Prandelli H 16 578400Multyrama Pfm H 18 578404

H 20 578406H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 16 578374U 18 578376U 20 578378

Raccorderie M 15 578312Metalliche M 18 578314aesPRES1) M 22 578316

M 28 578318Raccorderie M 15 578312Metalliche M 18 578314inoxPRES1) M 22 578316

M 28 578318Raccorderie M 15 578312Metalliche M 18 578314steelPRES1) M 22 578316

M 28 578318RBM Tita-gas TH 16 578352

TH 20 578358TH 26 578362TH 32 578364

RBM Tita-fi x B 14 578466B 16 578468B 18 578470B 20 578472B 26 578474F 16 578456F 18 578458F 20 578460H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 14 578372U 16 578374U 18 578376U 20 578378

Redi Nicoll Fluxo TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Redi Nicoll Fluxo TH 16 578352Gas TH 20 578358

TH 26 578362

RIFENG U U 14 578372PRESS FITTING U 16 578374(F5) U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

RIFENG TH TH 16 578352PRESS FITTING TH 20 578358(F9) TH 25 578360

TH 26 578362TH 32 578364TH 40 578624

RIQUIER RFz 12 578490A SERTIR RFz 16 578492

RFz 20 578494RFz 25 578496

Roth RN 14 578434RN 17 578436RN 20 578438RN 25/26 578440RN 32 578442

Roth España - TH 16 578352Global Plastic TH 18 578356Rothapress TH 20 578358

TH 25 578360TH 32 578364TH 40 578624

Roth Nordic RN 16 578454Alu-LaserPlus/ RN 20 578438PressCheck RN 25/26 578440(DNK-NOR-SWE-FIN)RN 32 578442Rubinetterie M 15 578312Bresciane M 18 578314Bonomi M 22 578316TURBO INOX M 28 578318

M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

Rubinetterie M 15 578312Bresciane M 18 578314Bonomi M 22 578316TURBO STEEL M 28 578318

M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530

Rubinetterie TH 14 578348Bresciane TH 16 578352Bonomi TH 18 578356TURBO PRESS TH 20 578358

TH 26 578362TH 32 578364TH 40 578624

Rubinetterie TH 16 578352Bresciane TH 20 578358Bonomi TH 26 578362TURBO PRESS TH 32 578364GASSA.MI plastic TH 14 578348

TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624

SA.MI plastic TH 16 578352Multistrato Gas TH 20 578358

TH 26 578362TH 32 578364

SANHA B 16 5784683fi t-Press Pb-free B 20 578472Serie 25000 B 26 578474

B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464F 40 578478H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378U 32 578382U 40 578386

SANHA B 16 5784683fi t-Press PPSU B 20 578472Serie 35000 B 26 578474

B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382

SANHA-NiroSan SA 15 578514Gas Presssystem SA 18 578518Serie 17000 SA 22 578520

SA 28 578522M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA-NiroSan SA 15 578514Industry SA 18 578518Presssystem SA 22 578520Serie 18000 SA 28 578522

M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA-NiroSan- SA 15 578514Presssystem SA 18 578518Serie 9000 SA 22 578520

SA 28 578522M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs Mini / pressing rings Accessory for ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC

Page 10: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

75

Pip

e p

res

sin

g te

ch

no

log

ySANHA-NiroSan SA 15 578514SF Presssystem SA 18 578518Serie 19000 SA 22 578520(silicone free) SA 28 578522

M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA SA 15 578514NiroTherm SA 18 578518Serie 91000 SA 22 578520

SA 28 578522M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA SA 15 578514NiroTherm SA 18 578518Industry SA 22 578520Serie 98000 SA 28 578522

M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA-Press SA 12 578510Chrom SA 15 578514Serie 16000 SA 18 578518

SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528V 12 578324V 15 1) 578328V 18 1) 578332V 221) 578334V 28 578336V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)V 28 45° (PR-2B)3) 574510 R574510 R574510

SANHA-Press SA 12 578510GAS Pressfi ttings SA 14 578512Serie 10000/ SA 15 578514Serie 11000 SA 16 578516

SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 12 578324V 14 578326VG 16 578340V 15 1) 578328V 16 578330VG 16 578340V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502VG 14 45° (PR-2B)3)574536 R574536 R574536V 15 45° (PR-2B)3) 574504 R

VG 16 45° (PR-2B)3)574538 R574538 R574538V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA-Press SA 12 578510Pressfi ttings SA 14 578512Serie 6000 SA 15 578514

SA 16 578516SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 12 578324V 14 578326VG 14 578338V 15 1) 578328V 16 578330VG 16 578340V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502VG 14 45° (PR-2B)3)574536 R574536 R574536V 15 45° (PR-2B)3) 574504 R

VG 16 45° (PR-2B)3)574538 R574538 R574538V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA-Press SA 12 578510SOLAR SA 15 578514Pressfi ttings SA 18 578518Serie 12000/ SA 22 578520Serie 13000 SA 28 578522

M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 12 578324V 151) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA SA 12 578510PURAPRESS SA 14 578512Serie 8000 SA 15 578514

SA 16 578516SA 18 578518SA 22 578520SA 28 578522M 12 1) 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 1) 578318M 35 1) 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 12 578324V 14 578326VG 14 578338V 15 1) 578328V 16 578330VG 16 578340V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502VG 14 45° (PR-2B)3)574536 R574536 R574536V 15 45° (PR-2B)3) 574504 R

VG 16 45° (PR-2B)3)574538 R574538 R574538V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

SANHA-Therm SA 12 578510Serie 24000 SA 15 578514

SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 12 578324V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfi tting systems for gas installations may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2st quarter of 2008), “208” (2st nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd

2) For accommodating suitable pressing inserts.3) Adaptor tongs, see page 78, are necessary for driving the pressing rings (PR).Suitability of the ROLLER’S pressing tools for pressfi tting systems: Status 09.10.2015. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fi tting systems on request.

Page 11: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

76

Pip

e p

res

sin

g t

ec

hn

olo

gy

SANHA-Therm SA 12 578510Industry SA 15 578514Serie 28000 SA 18 578518

SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 12 578324V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

SATEC SK VITermTH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 40 578386

Schwer Fittings M 12 578310AQUApress M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Seppelfricke V 12 578324VSH SudoPress V 15 578328C-Stahl V 18 578332Visu-Control V 22 578334

V 28 578336V 35 578604

Seppelfricke V 15 578328VSH SudoPress V 18 578332Edelstahl V 22 578334Visu-Control V 28 578336

V 35 578604Seppelfricke V 12 578324VSH SudoPress V 15 578328Kupfer V 18 578332Visu-Control V 22 578334

V 28 578336V 35 578604

Seppelfricke V 15 578328VSH SudoPress V 18 578332Kupfer Gas V 22 578334Visu-Control V 28 578336

V 35 578604Seppelfricke V 15 578328VSH SudoPress V 18 578332Kupfer Solar V 22 578334Visu-ControlSeppelfricke TH 14 578348SkinPress TH 16 578352Visu-Control TH 18 578356

TH 20 578358TH 26 578362THL 32 578368TH 40 578624

Seppelfricke M 12 578310VSH XPress M 15 578312C-Stahl M 181) 578314

M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Seppelfricke M 15 578312VSH XPress M 181) 578314Edelstahl M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Seppelfricke M 15 578312VSH XPress M 181) 578314Edelstahl gasEdelstahl gas M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Seppelfricke M 12 578310VSH XPress M 15 578312Kupfer M 181) 578314

M 22 578316M 281) 578318M 35 578390V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Seppelfricke M 15 578312VSH XPress M 181) 578314Kupfer gasKupfer gas M 22 578316

M 281) 578318M 35 578390

SESTA TH 14 578348SESTA GAS TH 16 578352

TH 20 578358TH 26 578362TH 32 578364

SESTA H 16 578400sistema H 20 578406multistrato TH 14 578348

TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378

SLOVARM U 16 578374PEX-THERM U 20 578378

H 26 578410U 32 578382H 16 578400H 20 578406H 26 578410H 32 578412

SOMATHERM H 16 578400MULTI'X H 20 578406

H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382

SOMATHERM H 12 578396SomaPRESS H 16 578400

H 20 578406H 25 578408RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496U 16 578374U 20 578378U 25 578380

STANDARD U 16 578374HIDRAULICA U 18 578376MultiStandard U 20 578378

U 25 578380U 32 578382U 40 578386

STELBI H 16 578400Polikraft H 20 578406

H 26 578410TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378

STELBI TH 16 578352Stelgas TH 20 578358

TH 26 578362Systerm H 16 A 578420WELCO-Gas H 20 A 578426

H 26 A 578430H 32 A 578432

Systerm H 14 A 578418WELCO-Flex H 16 A 578420

H 17 A 578422H 20 A 578426H 26 A 578430H 32 A 578432

Systerm H 16 A 578420WELCO-Teck H 20 A 578426

H 26 A 578430TDM BRASS TH 16 578352Serie 1600 TH 18 578356

TH 20 578358TH 26 578362THL 32 578368H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378C 26 578392U 32 578382

TDM BRASS TH 16 578352Serie 1700 (Gas) TH 20 578358

TH 26 578362THL 32 578368

TERMICALINE B 16 578468Termipex B 20 578472

B 26 578474B 32 578476H 16 578400H 20 578406TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

TermoConcept Basic E012) 578618TC-PRESSTHERMOLUTZ H 14 578398

H 16 578400H 17 578402TH 20 578358

TE-SA TH 14 578348TE-SA press TH 16 578352serie 800 TH 18 578356

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

TIEMME TH 14 578348AL-COBRAPEX TH 16 578352Serie 1650 TH 18 578356

TH 20 578358TH 25 578360TH 26 578362THL 32 578368TH 40 578624

TIEMME RFz 12 578490Serie 1700 PE-X RFz 16 578492a pressare RFz 20 578494

RFz 25 578496RFz 32 578498

TIEMME TH 16 578352TIEMME Gas TH 20 578358

TH 26 578362THL 32 578368

TIGRE TH 16 578352ALPEX GÁS TH 20 578358

TH 26 578362TH 32 578364

TKM TH 14 578348Systemtechnik TH 16 578352

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

TRA U 16 578374MULTITRAPRESSU 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

TRA TRAPRESS H 12 578396H 16 578400H 20 578406H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498

TWEETOP U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386

UNICAL AG U 16 578374MAX-MULTIPEX U 20 578378

H 26 578410U 32 578382

UNIDELTA TH 16 578352DeltAll TH 20 578358

TH 26 578362TH 32 578364TH 40 578624H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382U 40 578386

UNIDELTA TH 16 578352DeltAll GAS TH 20 578358

TH 26 578362TH 32 578364TH 40 578624H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382

Uponor MLC UP 14 578576UP 16 578578UP 18 578580UP 20 578582UP 25 578584UP 32 578586U 40 578386

Uponor MLC-D UP 16 578578UP 20 578582UP 25 578584UP 32 578586

Uponor MLC-G UP 20 578582UP 25 578584UP 32 578586

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs Mini / pressing rings Accessory for ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC

Page 12: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

77

Pip

e p

res

sin

g te

ch

no

log

yUponor UP 16 578578Uni Pipe PLUS UP 20 578582

UP 25 578584UP 32 578586

Valsir PEXAL H 14 578398H 16 578400H 20 578406H 26 578410H 32 V 578602

Valsir PEXAL Gas H 14 578398H 16 578400H 20 578406H 26 578410

Van Marcke Log. TH 16 578352Tu-Bi-Pex TH 17 578354

TH 20 578358TH 26 578362TH 32 578364TH 40 578624

Van Marcke Log. M 12 578310Tu-Bi-Press M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Variotherm TH 11,6 578344System TH TH 16 578352

TH 20 578358Viega VX 12 578550Fonterra VP 14/15 578480

VP 16/17 578482VP 20 578484VP 25 578486

Viega Pexfi t VX 16 578552VX 20 578554VX 25 578556

Viega Pexfi t G VX 16 578552VX 20 578554VX 25 578556

Viega Prestabo V 12 578324V 15 578328V 18 578332V 22 578334V 28 578336V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)V 28 45° (PR-2B)3) 574510 R574510 R574510

Viega Profi press V 12 578324VG 14 578338V 15 578328VG 16 578340V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502VG 14 45° (PR-2B)3)574536 R574536 R574536V 15 45° (PR-2B)3) 574504 R

VG 16 45° (PR-2B)3)574538 R574538 R574538V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Viega V 12 578324Profi press G V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Viega V 12 578324Profi press S V 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Viega V 12 578324Profi press Therm V 15 578328

V 18 578332V 22 578334V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)V 22 45° (PR-2B)3) 574508 R574508 R574508

Viega ProPress VUS ½" (OD 15,9 mm)VUS ½" (OD 15,9 mm)VUS ½" 578566System USA VUS ¾" (OD 22,2 mm)VUS ¾" (OD 22,2 mm)VUS ¾" 578568

VUS 1" (OD 28,6 mm) 578570VUS 1¼" (OD 34,9 mm) (OD 34,9 mm)VUS 1¼" (OD 34,9 mm)VUS 1¼" 578606

Viega Propress VAU 15 (OD 12,7 mm)VAU 15 (OD 12,7 mm)VAU 15 578630WATER System VAU 20 (OD 19,1 mm)VAU 20 (OD 19,1 mm)VAU 20 578632AUS VAU 25 (OD 25,4 mm)VAU 25 (OD 25,4 mm)VAU 25 578634

VAU 32 (OD 31,8 mm) (OD 31,8 mm)VAU 32 (OD 31,8 mm)VAU 32 578636Viega PropressG VAU 15 (OD 12,7 mm)VAU 15 (OD 12,7 mm)VAU 15 578630GAS System VAU 20 (OD 19,1 mm)VAU 20 (OD 19,1 mm)VAU 20 578632AUS VAU 25 (OD 25,4 mm)VAU 25 (OD 25,4 mm)VAU 25 578634

VAU 32 (OD 31,8 mm) (OD 31,8 mm)VAU 32 (OD 31,8 mm)VAU 32 578636

Viega Raxofi x VRX 16 578640VRX 20 578642VRX 25 578644VRX 32 578646

Viega Sanfi x VP 16/17 578482VP 20 578484VP 25 578486VP 32 578488

Viega Sanpress V 12 578324V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Viega V 15 578328Sanpress Inox V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Viega V 15 578328Sanpress Inox G V 18 578332

V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R574512 R574512

Viessmann TH 14 578348TH 16 578352TH 20 578358TH 26 578362TH 32 578364

VSH MultiPress U 14 578372U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386

VSH V 12 578324SudoPress CarbonV 15 578328

V 18 578332V 22 578334V 28 578336V 35 578604

VSH V 12 578324SudoPress CopperV 14 578326

V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

VSH V 12 578324SudoPress V 14 578326Copper GasCopper Gas V 15 578328

V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604

VSH V 14 578326SudoPress V 15 578328Copper Solar V 16 578330

V 18 578332V 22 578334

VSH V 15 578328SudoPress V 18 578332Stainless V 22 578334

V 28 578336V 35 578604

VSH TH 14 578348SkinPress TH 16 578352

TH 18 578356TH 20 578358TH 26 578362THL 32 578368TH 40 578624

VSH TH 16 578352SkinPress Gas TH 20 578358

TH 26 578362THL 32 578368

VSH M 12 578310XPress Carbon M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

VSH M 12 578310XPress Copper M 15 578312

M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

VSH M 15 578312XPress Copper M 181) 578314GAS M 22 578316

M 281) 578318M 35 578390

VSH M 15 578312XPress Copper M 181) 578314Solar M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

VSH M 15 578312XPress Stainless M 181) 578314

M 22 578316M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

VSH M 15 578312XPress Stainless M 181) 578314Gas M 22 578316

M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

Walter Meier U 16 578374Metalplast U 18 578376

U 20 578378U 25 578380U 32 578382U 40 578386

Watts MTR TH 16 578352Art press TH 20 578358

TH 26 578362TH 32 578364

WATTS US ⅜" 578534RADIANT US ½" 578536Watts WaterPEX US ¾" 578538

US 1" 578540WATTS US ⅜" 578534RADIANT US ½" 578536Watts US ¾" 578538RadiantPEX US 1" 578540WATTS U 16 (½") 578374RADIANT U 20 (⅝") 578378Watts U 25 (¾") 578380RadiantPEX-AL U 32 (1")U 32 (1") 578382Wavin U 14 578372Tigris K1 U 16 578374

U 20 578378U 25 578380U 32 578382U 40 578386

Wavin U 14 578372Tigris M1 U 16 578374

U 20 578378U 25 578380U 32 578382U 40 578386

WeeConPress M 12 578310Alu M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)3) 574530 R574530 R574530V 12 578324V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R574502 R574502V 15 45° (PR-2B)3) 574504 R

V 18 45° (PR-2B)3) 574506 R574506 R574506V 22 45° (PR-2B)3) 574508 R574508 R574508V 28 45° (PR-2B)3) 574510 R574510 R574510V 35 45° (PR-2B)3) 574512 R574512 R574512SA 12 578510SA 15 578514SA 18 578518SA 22 578520SA 28 578522

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfi tting systems for gas installations may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2st quarter of 2008), “208” (2st nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd

2) For accommodating suitable pressing inserts.3) Adaptor tongs, see page 78, are necessary for driving the pressing rings (PR).Suitability of the ROLLER’S pressing tools for pressfi tting systems: Status 09.10.2015. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fi tting systems on request.

Page 13: pressing tongs Mini pressing rings - albert-roller.de · 66 Pipe pressing technology Accessory for ROLLER’S Multi-Press Mini ACC and Multi-Press Mini 22 V ACC: System-specifi c

78

Pip

e p

res

sin

g t

ec

hn

olo

gy

ROLLER’S pressing ring 45° (PR-2B)with 2 pressing jaws for pressings at places of diffi cult access, with Mini Z1 adaptor tongs.

Accessories Art.-No.

Adaptor tongs Mini Z1 for driving the ROLLER’S pressing rings 45° (PR-2B) 578258Steel case for adaptor tongs Mini Z1 and adaptor tongs Z1 as well as 6 ROLLER’S pressing rings M 12 ‒ 35 45° (PR-2B) or V 12 ‒ 35 45° (PR-2B) 574516 A574516 A574516Steel case for 8 pressing tongs Mini / cropping tongs Mini and shelf for pipe cutter up to Ø 42 mm 578295 A578295 A578295

WeeConPress M 12 578310C-Stahl M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

WeeConPress M 12 578310Inox M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

WeeConPress M 12 578310Kupfer M 15 578312

M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R574520 R574520M 15 45° (PR-2B)3) 574522 R574522 R574522M 18 45° (PR-2B)3) 574524 R

M 22 45° (PR-2B)3) 574526 R574526 R574526M 28 45° (PR-2B)3) 574528 R574528 R574528M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R574530 R574530

WeeConFlex H 16 578400MVR H 20 578406

H 26 578410H 32 578412U 40 578386TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624

WEM U 16 578374WIELAND TH 14 578348cuprotherm TH 16 578352CTX TH 18 578356

TH 20 578358TH 26 578362

WKS-Press TH 14 578348TH 16 578352TH 17 578354TH 20 578358TH 26 578362TH 32 578364TH 40 578624

WÜRTH TH 16 578352Würth TH 20 578358

TH 26 578362XtraConnect F 16 578456

F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378

(DN 26) U 25 578380U 32 578382VP 16 578482VP 20 578484VP 32 578488

Zetaesse TH 14 578348Multistrato TH 16 578352EUROPEX TH 18 578356

TH 20 578358TH 26 578362TH 32 578364U 14 578372U 16 578374U 18 578376U 20 578378

Zetaesse TH 14 578348Multistrato TH 16 578352ISOPEX TH 18 578356

TH 20 578358TH 26 578362TH 32 578364U 14 578372U 16 578374U 18 578376U 20 578378

Zetaesse Rame TH 14 578348HydroSAN TH 16 578352

TH 20 578358U 14 578372U 16 578374U 20 578378

Zetaesse Rame TH 14 578348ThermoSAN TH 16 578352

TH 20 578358U 14 578372U 16 578374U 20 578378

ZEWOTHERM TH 12 578346TH 16 578352TH 17 578354TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624

ZURN US ⅜" 578534INDUSTRIES US ½" 578536ZURN PEX US ¾" 578538

US 1" 578540

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs Mini / pressing rings

ROLLER’S Mini pressing tongswith 2 tiltable monoblock pressing jaws.

Pressfi tting systems for gas installations may only be pressed with the pressing tongs Mini which are highlighted in yellow in the table. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2st quarter of 2008), “208” (2st nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.nd

2) For accommodating suitable pressing inserts.3) Adaptor tongs, see page 78, are necessary for driving the pressing rings (PR).Suitability of the ROLLER’S pressing tools for pressfi tting systems: Status 09.10.2015. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fi tting systems on request.

Accessory for ROLLER’S Multi-Press Mini ACC and ROLLER’S Multi-Press Mini 22 V ACC