Press Release ### For Immediate Release Cara Eccleston (402) 932-8689 [email protected] Elliott Equipment Company Adds 2,000 lb Material Handling to M43 HiReach Model Omaha, NE - Elliott Equipment Company is excited to have released a new main boom material handling option on the M43 HiReach model. Elliott relied on extensive user feedback in developing the M43 HiReach. The new option allows operators to lift loads using the lower turret controls similarly to Ellliott’s popular L60 and G85 HiReach models. The 2,000 lb* material handling option is available in combination with Elliott’s 500 lb material handling jib winch option in the platform, providing the operator with two unique ways of handling materials. The M43 features the following: • 48 foot working height • Class leading 36’ side reach • Unrestricted 36 foot working side reach • Class leading 2,000 lb material handling capacity - no crane certification needed • Rotating 30” x 54” two worker platform with 500 lb platform capacity • Platform mounted material handling jib winch & 110 V power • Narrow outriggers extend within chassis mirrors for flexible set up • Mounts on 19,000 lb GVWR chassis Adding a main boom winch makes the M43 model an increasingly attractive machine to companies that need non-CDL aerial work platforms with material handling features. The additional material handling makes the M43 akin to a shorter L60. It will be an excellent addition to current fleets and essentially makes this a brand new product that can also replace ladders or telescopic articulated machines. Elliott was able to maintain the same outrigger setup on the M43, keeping the overall outrigger spread to 10’5”. Note that the main boom material handling option handling option requires unique hydraulic and structural components. Therefore, this option is not available as a retrofit on older M43 models. About Elliott For more than 65 years, Elliott Equipment Company has stood for industry-leading products and some of the most innovative design features. Elliott manufactures over 50 models of truck mounted cranes and aerial work platforms with dozens of custom features and options. Headquartered in Omaha, Nebraska, Elliott’s state-of-the-art facilities continue to manufacture equipment that is built to last.

Press Release - Texas Sign Associationadmin.txsigns.org/pdf_files/press_releases/1475162023_Elliott press... · Press Release ### For Immediate Release . Cara Eccleston (402) 932-8689

Download PDF Report

Upload
vuongtuong
View
217
Download
0

Embed Size (px)

Citation preview

Press Release

###

For Immediate Release Cara Eccleston (402) 932-8689

[email protected]

Elliott Equipment Company Adds 2,000 lb Material Handling to M43 HiReach Model

Omaha, NE - Elliott Equipment Company is excited to have released a new main boom material handling option on the M43 HiReach model. Elliott relied on extensive user feedback in developing the M43 HiReach. The new option allows operators to lift loads using the lower turret controls similarly to Ellliott’s popular L60 and G85 HiReach models. The 2,000 lb* material handling option is available in combination with Elliott’s 500 lb material handling jib winch option in the platform, providing the operator with two unique ways of handling materials. The M43 features the following:

• 48 foot working height • Class leading 36’ side reach • Unrestricted 36 foot working side reach • Class leading 2,000 lb material handling capacity - no crane certification needed • Rotating 30” x 54” two worker platform with 500 lb platform capacity • Platform mounted material handling jib winch & 110 V power • Narrow outriggers extend within chassis mirrors for flexible set up • Mounts on 19,000 lb GVWR chassis

Adding a main boom winch makes the M43 model an increasingly attractive machine to companies that need non-CDL aerial work platforms with material handling features. The additional material handling makes the M43 akin to a shorter L60. It will be an excellent addition to current fleets and essentially makes this a brand new product that can also replace ladders or telescopic articulated machines. Elliott was able to maintain the same outrigger setup on the M43, keeping the overall outrigger spread to 10’5”. Note that the main boom material handling option handling option requires unique hydraulic and structural components. Therefore, this option is not available as a retrofit on older M43 models. About Elliott For more than 65 years, Elliott Equipment Company has stood for industry-leading products and some of the most innovative design features. Elliott manufactures over 50 models of truck mounted cranes and aerial work platforms with dozens of custom features and options. Headquartered in Omaha, Nebraska, Elliott’s state-of-the-art facilities continue to manufacture equipment that is built to last.

mailto:[email protected]