Presentazione della Società Aerospaziale Mediterranea S.c.r.l

7/29/2019 Presentazione della Societ Aerospaziale Mediterranea S.c.r.l

1/19


2/19

Societ Aerospaziale Mediterranea s.c.r.l.Societ Aerospaziale Mediterranea s.c.r.l.

The Mediterranean Aerospace Society SAM is composed by

twelve Companies (large, small and medium) operating in theaeronautic and space sector. SAM, a simultaneous engineering

system, is one of the first Italian example of Companies

aggregation in the aerospace sector.

SAM has been founded to both meet market needs and take

advantage of all the development opportunities coming from

national and international economic recovery.

LA SOCIETA


3/19


ACTIVITIES

design, manufacturing andaircraft maintenance activities,

development and manufacturing

of mechanical and electronic

apparatus for aeronautic-space

industry

I

N

D

U

S

T

R

Y

advanced technology services onearth observation implemented

through satellite, avionic platforms

and ground segment for

monitoring and surveillance of

territorial environment parameters

S

E

R

V

I

C

E

S


4/19


INDUSTRY

A E R O N A U T I C S E C T O R

S P A C E S E C T O R

General Aviation aircraft design and manufacture

General and commercial aircraft maintenance

Avioelectronic board programmes upgrading

Prototyping and reverse engineering

No-destructive controls and surface treatments

Interiors design and manufacture

Precision machining

Composite materials design and develop

Design and manufacturing of spaceinfrastructures and payloads for scientific and

commercial missions, environmentalmonitoring, telematic and applications

Design, development and manufacturing of onboard and ground electronic equipment


5/19


SERVICES

ENVIRONMENTAL MONITORING

Integrated earth observation system through

satellite and avionic platform using multisensor

technologies and possessing operating

characteristics enabling data acquisition via

diverse sensors in a single mission.

Ground segment which guarantees data in the

field of Geographic Information 24/7 for

environmental monitoring and surveillance

services, mapping and value added information for

GIS and DDS systems.

APPLICATIONS

Mapping of burnt areas

Monitoring of hydro-geological instability

Monitoring of urban environments

Monitoring of rubbish dumps

Mapping of vegetation and agricultural areas


6/19


COMPANIES


7/19Societ Aerospaziale Mediterranea s.c.r.l.Societ Aerospaziale Mediterranea s.c.r.l.

CGS S.p.a. (ex Carlo Gavazzi Space Spa) is

acknowledged as one of the more large

company in Europe for space systems

integration. It is part of a cluster of European

enterprises operating in the aerospace and

telematic business. Founded in 1981, with

headquarters in Milan and excellence centresin Italy, the company employs more than 180

qualified engineers & physicists. CGS has

consolidated expertise, resources and facilities

to carry out manufacturing, integration,

qualification and flight certification. Its success

is due to a combination of technical expertise,

innovative technologies and low cost solutions

which allow to give customers easy access to

space.

C O N T A C T S

CGS S.p.a.Via Gallarate, 15020151 Milano - ItalyTel. +39 02 380481Fax. +39 02 3086458E-mail: [email protected]

Web: www.cgspace.it

A C T I V I T I E S Prime contractor at system and/or subsystem level

Satellites: turn-key systems with standard platforms

USV unmanned space reusable vehicles

Payloads and scientific instruments for experiments in

microgravity

International Space Station: facilities and payloads

Ground Segment and Ground Support Equipments

Scientific instruments for remote sensing and

environmental monitoring

Systems and Services for Earth Observation Commercial applications of space technologies for

security, telemedicine, fleet management, surveillance

Software Projects

SAR image processing

E.O. image compression

Digital and Power electronics

Structural /Thermal research projects

AIT activities (Assembly,Integration,Test)

Product Assurance & Safety

Compagnia Generale dello Spazio



Founded in 1986 by F.lli Pascale, Tecnam

interests are divided into two main activities: the

first pertains to the construction and assembly of

structural components for commercial aviation

(tailplanes, fuselage panels, etc.) for which it have

official qualifications, the other sector of activity

pertains, in fact, to the design and manufacture of

prototypes and production units for light or

ultralight aviation. The distribution network of

Tecnam aircraft can rely today on dealers in all

majorcountries. The Company's strategy is

particularly dedicated on investing resources in

research and development with the aim of

continued refinement and upgrading of its

products.C O N T A C T S

TECNAM S.r.l.Via Maiorise snc81043 Capua (Na)-ItalyTel. +39 0823 620134Fax. +39 0823 622899E-mail: [email protected]

Web: www.tecnam.com

P r o d u c t s

Certified

P2002 JR P2002 JF

P92 JS

Ultralight

P92JA BIRU

P92-2000 RG

PP96 Golf

P2002 Sierra

P92 ECHO P92 ECHO Super

P2004 BRAVO

P92 SEASKY

Costruzioni Aeronautiche TECNAM
http://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p2002Sierra.cfmhttp://www.tecnam.com/ita/p_92SEASKY.cfmhttp://www.tecnam.com/ita/p_2004Bravo.cfmhttp://www.tecnam.com/ita/p96Golf.cfmhttp://www.tecnam.com/ita/p2000RG.cfmhttp://www.tecnam.com/ita/p_92Jabiru.cfmhttp://www.tecnam.com/ita/p92JS.cfmhttp://www.tecnam.com/ita/p_2002JR.cfmhttp://www.tecnam.com/ita/p92JS.cfmhttp://www.tecnam.com/ita/p_2002JR.cfm



FOX BIT

Fox Bit S.r.l. has been working on the

innovation technologies market since 1985.

The high degree of specialization achieved

has allowed Fox Bit to be recognized as

Laboratory of Technological

Innovation by the Italian Ministry of

University and of Scientific and

Technological Research. Research anddevelopment represent the continuous aim

of the whole structure and the technological

level of the main customers guarantees

stimulus and checks for the continuous

growing of the internal know how. Our staff

is composed mainly of graduates and

undergraduates with an high degree of

specialization and it is organized in teams

related to the activity branch.

C O N T A C T S

FOX BIT S.r.l.Via E.Gianturco, 3180146 Napoli - ItalyTel. +39 081 7340777Fax. +39 081 7340808E-mail: [email protected]

Web: www.foxbit.it

Work Packages design for the

aeronautics sector;

Design and production of

electromechanics space structures;

development and manufacturing of

advanced equipment for ground and flight

segments.

Design, prototyping and test for avionics

components;

Rapid Prototyping and Rapid Tooling ;

Dedicated hardware and software

development processes;

Reverse Engineering using 3D laser

scanning and 3D CAD Modelling.

A C T I V I T I E S



GEVEN

Geven has over 30 years of experience in the

design, testing, production and maintenance of

aircraft interiors as well as passenger and crew

seating. Its main competence is the in-house

design and production of all components thus

retaining complete control over the finished

product. Gevens flexible and lean organization

combined with custom-made products and

continuous attention to costs and materialprovisioning constitute the basis for its long term

competitive advantage. Thanks to its philosophy

and flexibility Geven can promptly respond to the

individual requirements of customers.

Continuously strive to develop innovative and

attractive solution, Geven is approved to carry out

Static and Dynamic tests in accordance to

international regulation.

C O N T A C T S

Economy class: Aquarius, Horizon, Infinity, Luna, Diva

Business class: Genesis

VIP Swivel: Plus

Lavatory: L859, L1179,

Galley and Wardrobe

CostumersAeronautica Militare

Augusta

Airbus & ATR trhough Alenia

ASTC ANTONOV

Atitech Alitalia Group

Boeing

Brit Air

EADS Casa

EADS Sogerma Services

Embraer

Germania Fluggesellschaft

Lauda Air

Lufthansa

Officine Aeronavali

Piaggio Aero

South African Express

Stork Fokker

Thales

P r o d u c t sGEVEN Spa.Via Boscofangone sncZona Industriale Nola Marigliano80035 Nola (Na) - ItalyTel. +39 081 3121311Fax. +39 081 3121321E-mail: [email protected]

Web: www.geven.com



MAGNAGHI AERONAUTICA

Founded in 1936, thanking the costant attention

on preserving and increasing all in-house

professional skills, and researching new

technologies as well, it leaded Magnaghi to take

part in many international programmes (EFA,

TORNADO, M346, AIRBUS, BOING) and

designing, manufacturing and certifying completeLanding Gear Systems autonomously (C27 J, A

109 Power) it has become one of the leading

companies in the Landing Gear field. In addition

Magnaghi designs and manufactures a large

range of hydraulic device (up-lock and door lock,

hydraulic control system), alluminium, steel and

titanium sheet work to produce fuel tanks, engine

exhaust pipe, oil reservoir etc.

C O N T A C T S

MAGNAGHI AERONAUTICA S.p.a.Via Galileo Ferraris, 7680142 Napoli- ItalyTel. +39 081 5977300Fax. +39 081 5977301Web: www.magnaghiaeronautica.com

Costumers

AERMACCHIAMX; MB326; MB339; S41

AUGUSTAA109; A129; C47; Sikorsky NH90; AB 205/206

ALENIA AERONAUTICAC 27 J; G 22

APPHC 27 J

EMBRAERAMX

LIEBHERRM 346

MESSIER DOWTYATR 42-300; ATR 42-500; ATR 72 AIRBUS

MINISTERO DELLA DIFESA ITALIANA



METAL SUD

Metal Sud has an experience of more than ten

years in the execution of metal pretreatment and

painting, as well as conductive painting of plastic

materials. It is registered in the Suppliers List of

the Italian Defence Administration. Metal Sud

pursues: Non destructive controls: magneticinspection and with penetrants, Heat treatments:

stress relief and hydrogen embrittlement relief,Steel, titanium, aluminium and its alloys:degreasing, anodic oxidation, conversion with

alodine 1200/1500, passivation, cadmium plating,

preparation for bonding of aluminium alloys etc.

Metal Sud is also able to furnish, with a closedloop, piping ready to be installed and supplies withstandards, taking all necessary steps for thermal

treatment and the welding for parts or their

vernishing.

C O N T A C T S

METAL SUD S.r.l.Via Nazionale Appia Loc.Crisci81021 Arienzo(CE) - ItalyTel. +39 0823 805397Fax. +39 0823 805089E-mail: [email protected]

Web: www.metalsudsrl.it



M.T. Mechanical Technologies

M.T. Mechanical Technologies

srl, manufactures equipments, structural

and oleodynamic components by

machining differnt materials like alloys,

titanium and high resistant steels. M.T.

Mechanical Technologies suppliessurface treatments both stells and

alluminium. With its galvanic plant can

provide different application on different

materials.

A C T I V I T I E S

C O N T A C T S Costumers

MECAER

ALENIA AERONAUTICA

ALENIA SPAZIO

MAGNAGHI AERONAUTICA

VULCAN AIR

SEI

CAD-CAM design;

Precision mechanical machinig;

Surface treatments;

Heat treatments;

Plastic deformation and sheet machining;

CNC dimensional controls;

Maintenance;

Static and dynamics tests;

Painting;

M.T. Mechanical Technologies S.r.l.Via Carceri Vecchie, 4680046 S.Giorgio a Cremano (Na) - ItalyTel. +39 081 19363816Fax. +39 081 2143644E-mail: [email protected]

Web: www.mtsrl.net



NUOVA AVIORIPRESE

Nuova Avioriprese S.r.l. was born in 1980.

The company works in the

aerophotogrammerty field whit a its fleet

and machinaries. The company garantees

its services with great professionalism and

efficiency, optimising results with

instrumentation thenologically advanced.

Nouva Avioriprese is a research center,

trained to the consultation and orders of

research to support the innovation and the

scientific and technological developement in

the field of consulting services for

aerophotogrammetry, aerial takes, ortomap

and cartography. The research center

allows checks and territorial plannings to

wide range.

C O N T A C T S

A C T I V I T E S

Aerial takes b/w and colour for cartigraphic

production;

Thematic and synthesis map;

Digital terrestrial photogrammetry;

Goegraphical informative systems (GIS);

Thermographyc and infrared colour takes;

Numerical cartography;

Digital ortho-photo map;

DTM generation with Lidar technology;

Sightings set-fires

Formation and professional education;

Georadar system for non destructive

investigations of the subsoil for the location of

sub services, archaeological areas etc.

NUOVA AVIORIPRESE S.r.l.Aeroporto di CapodichinoNapoli - ItalyTel. +39 081 5841725Fax. +39 081 3443912E-mail: [email protected]

Web: www.avioriprese.it



SALVER

Salver was born in 1970, develops and

manufactures, in the aeronautic field, products in

composite materials, as well as spare parts or

bonded assies, realized either in composites and

in composite-metal, togheter with bonded or

riveted metal parts. Nowadays Salver is

developing, indrustialaizing and manufacturingspare parts and/or assies for new commercial

aircraft like: A380 for AIRBUS and in prospect also

BOING B787 e A350. Salver has invested much

on men plants and equipment, in order to defend,

consolidate and improve its own capacities to

compete in the current global market.

C O N T A C T S

SALVER S.p.a.Via D.Macaluso, 2/4 P.O. Box 23272100 Brindisi - ItalyTel. +39 0831 575911Fax. +39 0831 573878E-mail: [email protected]

Web: www.salver.it

ALENIA AERONAUTICAB767/777, ATR 42/72, C27 J, F2000

AIRBUS IndustriesA380

EUROCOPTERA318, A319, A320, A321, NH90, TIGER

GALILEO AVIONICAMIII, Mirach 100/5 (simulator system)

PIAGGIIO AEROINDUSTRIESP180, P166 MP, F2000

AUGUSTA WESTLANDAB 139, A 109

AERMACCHIEFA 2000, CF34

EADSDrohne CL 289

WASS- Whitehead Alenia Subwater SystemMU90 UW Torpedo

OAN-Officine AeronavaliDC8 Cargo, DC10 Cargo, Atlantique



TECHNO SYSTEM S.r.l. is specialized indesign, development and manufacturing of

electronic equipment. Electronic Systems,

Subsystems and Units are developed on a

custom based approach in order to satisfy in

the best way the technical specifications and theusers requirements for the specific application.

The company has internal skills for Hardware

and Software developments which enable the

implementation of customized and innovative

solutions.TECHNO SYSTEMis implementing itsown Quality System, described in the

Companys Quality Manual and related

Procedures, according to the UNI EN ISO 9001

standard.

C O N T A C T S

AEROSPACE ELECTRONIC

ELECTRONICS FOR SCIENTIFIC PAYLOADS

GROUND SEGMENT PRODUCTS

TECHNO SYSTEM DEVELOPMENTS

TECHNO SYSTEM DEVELOPMENTS S.r.l.Zona Industriale San Martino, 3580078 Pozzuoli (Na) - ItalyTel. +39 081 5263475Fax. +39 081 5262701E-mail: [email protected]

Web: www.tsdev.it


17/19



TECNOSPAZIO

Tecnospazio s.n.c. is a company operating inmechanics sector of high linear and volumetric

precision, it is specializising in up to 5 axis products with

up to diameter of 1.850 mm and tridimensional

impellers in particular.Technical office, equipped with

CAD/CAM software of the Unigraphics(version 16-18-

NX), provides to realization of mathematical models andplanning of multi-componential items. Detailed

information on all internal processes, including

manufacturing, is gathered and processed in interactive

way. The realization of intranet-extranet allows to view

these data in remote way as well (e.g.observig of single

item manufacturing in real-time mode in the workshop

through web cam). We operate in State-Of-The-Art

technological structure for satisfy demand in high-

quality product.

TECNOSPAZIO S.n.c.Zona Industriale San Nicola85025 Melfi (Pz) - ItalyTel. +39 0972 762046Fax. +39 0972 762371E-mail: [email protected]

Web: www.tecnospazio.net

C O N T A C T S

the realisation of a Unigraphics mathematic modelthe study of the right cutting methods

the design of the required equipment

the study of commercial and special tooling

the simulation of high-tech manufacturing

ENGINEERING

The organisation is ideally suited to the study and design of

complex-geometry prototypes (manufactured from a solid

block) and to the production of:

high-precision aeronautical components manufactured in an

aseptic laboratory at controlled temperatures (20 0.5) ;

rotative components such as rings, diaphragms, three-

dimensional impellers, pallet discs, spacers, etc.

PRODUCTION

Perform metrological inspection in an air-conditioned laboratory, where all measuringinstruments and calibrated plug gauges are kept.

Form errors are measured on a three-dimensionalcontinuous scanning machine with a maximumpermissible error of 0.0013mm along a lineardistance of 600mm.

METROLOGY


19/19S i t A i l M dit lS i t A i l M dit l

CONTACTS

Tel/Fax: 081 250 71 30

E-MAIL: [email protected]

WEBSITE: www.samaerospazio.it

HeadquarterVia A. Olivetti, 1

80078 Pozzuoli NA Italy
http://www.samaerospazio.it/http://www.samaerospazio.it/

Documents

Presentazione della Società Aerospaziale Mediterranea S.c.r.l