Medium Voltage equipment Panorama

MV/LV Prefabricated Substations

Indoor

The MV and LV equipment are delivered directly mounted ensuring a safety, and fast solution.They can be installed in existing building, in a substation or outdoor.

DistributionIndustryBuidings

630 KVA

Reconfiguring the MV network and protecting the MV/LV transformer with our MV switchgear ranges. Supplying LV energy with Minera and Trihal ranges.Distributing and protecting the LV network with Opus and Prisma Plus ranges.Managing functions remotely with Easergy Flair 200C, Easergy T200 and Easergy W200.

IEC

Integrated substation

Indoor/outdoor

2000 kVA

BS

Use of equipment conform to IEC standardsDegree of protectionElectromagnetic compatibilityFunctional testsTemperature classNon-flammable materialsMechanical resistance of the enclosureSound levelInsulation levelInternal arcing withstandEarthing circuit testOil retention

GRC (Glass ReinforcedCement) n

Concrete n

Operation

Design

Use

Application

IEC 62271-202 standard

Metal n

Material of the enclosure

Transformer Max power

Electrical equipment

Max Rated voltage

Compliance with standards

Compact substation

Design

DistributionIndustryBuidings

Outdoor

Outdoor operations type of substation allows reduce footprint and speed of installation. Internal equipment arrangement can be fitted to any type of access.

Distribution

Switching kiosk

IEC/HN

Outdoor

MV/LV

IEC/AS

n

Indoor

1250 kVA

MV/LV

IEC/HN

Indoor operations type of substation provides to operators a protection against bad weather and better working conditions.

Indoor

1 x 1000 kVAor 2 x 630 Kva

MV/LVUnderground

IEC

Indoor

3150 kVA

Tailor made

These substations offer modularity of their dimensions to respond to all equipment requirements.

Primary distribution,Large industries, Oil & Gas, Mine & Metal, Solar & Wind

Walk-in substations Specific

n

n

n

n

n

n

n

n

n

n

n

250 kVA

Schneider Electric Industries SAS89, boulevard Franklin RooseveltF-92505 Rueil-Malmaison cedexTel : +33 (0) 1 41 29 85 00www.schneider-electric.com

NRJED111045EN

As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication.

This document has been printed on ecological paper

Publishing: Schneider Electric Industries SASDesign: Schneider Electric Industries SASPrinting Altavia 06-2011

ART. 838

525 -

sch

neider Electric

- All rig

hts reserved

Unisarc

630 A

SM6-36SM6-24

630 A 1250 A

Ringmaster

IEC IECIEC IEC

630 A

21 kA

Compact and modular switch gear combining all MV functional units

Indoor and outdoor

IAC

25 kA

Complete system of modular cubicles

Indoor

IAC

Complete system of modular cubicles

Indoor

IAC

20 kA 25 kA20 kA

Complete system of modular cubicles

Indoor

IAC

SF6 CBSF6 LBS

SF6/vacuum CB SF6 CBVacuum CB

HVL

1200 A

ANSI

20 to 61 kA

IAC

Open-air Switch

HVL/cc

1200 A

ANSI

32 kA

IAC

SF6 switch

Air insulated switchgear

Insulating liquid

Ground Mounted Oil-Immersed Distribution Transformer

Self- Extinguishing CastResin DryTransformer

5 MVA5 MVA

Distribution transformer

Mineral oil

Minera TrihalDV-CASRM6

IEC / ANSIIEC

630 A630 A

25 kA 20 kA

Compactand modularswitchgear combining all MV functional units

Indoor

IAC

Wind dedicated modular switch-gear combiningall MV functional units used in wind farms

Indoor

IAC

Solidinsu l a tion

SF6 CBSF6 LBS

Vacuum CB

Gas insulated switchgear

40 kA

630 A & 1250A

Insulating liquid

High Efficiency Oil-Immersed Transformer

5 MVA

Mineral oil

Minera HE

Insulating liquid

Oil-Immersed Transformer for Photovoltaic Applications

1.5 MVA

Mineral oil

Minera PV

Insulating liquid

Transformers for Hazardous Areas

5 MVA

Mineral oil

Minera ATEX

Biodegradable insulating liquid

Ecological Oil-Immersed Transformer

5 MVA

Vegetal oil

Vegeta

Hire fire pointinsulating liquid Compact design

Compact and Fire Resistant Oil-Immersed Transformer

3,3 MVA

Synthetic or natural ester

SiltrimFluokit

630/1250A

IEC

25 kA

Complete system of modular cubicles

Indoor

IAC

20 kA

630 A

SM6 FBX

IEC

630 A

25 kA

Compact and modular switchgear combining all MV functionnal units

Indoor

IAC

Vacuum CBSF6 LBS

630 Aoption busbar 1250A

21 kA

RATED VOLTAGE

MAX. RATED CURRENT

MAX. RATED SHORT CIRCUIT CURRENT

Flusarc

IEC / ANSI

630 A

25 kA

Compact and modular switchgear combining all MV functionnal units

Indoor

IAC

Vacuum CB

CAS36

IEC

630 A

20 kA

Compactswitchgear combining all MV functional unitsused in RMU

Indoor

IAC

SF6 LBS

Discovering our offer at a glance Products and equipmentfor Medium Voltage distribution networks up to 5 MVA

Medium Voltage products Panorama

Load break switch

Remote controlled with Easergy T200 P control unit

Manual or automaticload break switch

Pole mounted switchgear

W seriesRL series U seriesN seriesPM6 PM6 52

630 A 630 A800 A 400 A630 A 630 A

Sectionaliser capabilities

6 kA16 kA 12.5 kA16 kA16 kA 12.5 kA/3 s

ANSIANSI ANSIANSIIEC IEC

Load break switch

Recloser Recloser Single Wire Earth Return (SWER)Recloser

Power factor correction

600 kvar

Power factor correction on MV networks or devices

14400 kvar

31.5 kA

Power factor correction and harmonic filtering on MV networks

Fixed or automatic capacitor banks for motor, substation, or global distribution

Indoor or outdoorinstallation

Instrumenttransformer

2500 A2500 A5000 A

50 kA40 kA50 kA

Outdoor Current Transformer and Voltage Transformer

Ring type and medium voltageLow Power Current Transformer (LPCT)

Ring type and medium voltage Current Transformer, Voltage Transformer

Fuse

AFNORIEC/DIN/UTEIEC/UTEDIN/IEC

250 A2.5 A125 A250A

l1 l1 l1 l150 kA63 kA50 kA63 kA

Motor protection fuse range

Fuse for measurement transformer protection up to 24 kV (Tepefuse) and up to36 kV (Fusarc CF)Back-up technology

Fuses for distribution transformer from 3.6 kV to 36 kV

Switch / disconnector

IEC

630/1250 A

25 kA

Indoor load break switch, disconnector and accessories

vacuum/ epoxy

SF6 vacuum/ epoxy

vacuum/ SF6

SF6"all film" with or withoutinternal fuses

vacuum / SF6drydrydrySF6

CP 200 seriesCT, VTLPCTCT, VTMGKTepefuse, Fusarc CFSolefuseFusarc CFLBSkit

Fault passage indicator

EasergyFlair 200C

Remotemonitoring

digital

MV substation remote monitoring unit

Battery 220 Vac backed-up supply

Embedded web server Local and remote configuration

EasergyT200I - T200E

Substation Control unit

digital

Associated with all types of MV switchgear

T200E associated with Ringmaster only; limited to 4 switches.

Ensure remote control and automated managementEmbedded web serverLocal and remote configuration

SCADA

Easergy L500 Propivar

Detection Phase and earth fault

Installation Wall-mounted

Earthing system: direct, impedent, compensated, isolated

MeasurementU,I, P, Q, S, cos6 D.I., 3 D.O.

ProtocolsIEC 870-5-101, DNP3, Modbus

Communication1 Communcation port , Transmission interfaces: PSTN, Radio,GSM,GPRS, Ethernet, RS232, RS485...

Modbus IEDs concentrator

Switch monitoring and control unit

Fault indicator: phase and earth fault

Capacity1-16 switches

Battery autonomy16 h

Motorisation24 - 48 Vdc

ProtocolsModbus/IP,IEC 870-5-101/104,DNP3, DNP3/IP

CommunicationRadio, PSTN, GSM,GPRS

Modbus IEDs concentrator

Remote control system

Capacity500 Easergy type devices

Network and substation viewsAlarm logs, archives

Data configurationProfessional communicationsand database editorData creation via dialogue boxes

ProtocolsModbus, Modbus IP, IEC 101/104

CommunicationPermanent and non perma-nent: telephone/GSM, radio, direct public and dedicated private linePeriodic call management

OptionWebview, Multistation and Horn/Lamp indication options

Flusarc-PLA

630 A

25 kA

IEC

Load break switch

Manualy operated

SF6

TRLF

1250 A

16 kA

IEC

Air disconnector or switch-disconnector

Manualy operated

Air

SBC

630 A

20 kA

IEC

Air break switch

Manualy operated

Air

IEC

630 A

25 kA

Indoor load break switch disconnector and accessories

SF6

ISR

IEC

400 A630 A

25 kA

Indoor load break switch disconnector and accessories

Air

ISARC

IEC/EN

630 A1600 A2500 A

20 kA

L-TRI 5

Indoor load break switch disconnector and accessories

Air

IEC/EN

20 kA

TRI

Indoor disconnector and accessories

Air

AIR Switch / disconnector AIR disconnector

1600 A max

25 kA

VEIVacuum L

Fixed, removable, or withdrawable circuit breakerSide mounted mechanism

Vacuum

Circuit breaker

630 A

25 kA

Fluvac

Fixed circuit breaker, integrating:Vacuum circuit breaker,Disconnectorearthing switch,Reduced width insulated in SF6(SF6 can be replaced by Nitrogen for 12 kV) and accessories

Vacuum CB/SF6

Easergy Flair

digital

Phase and earth fault indicator for underground network

Lithium battery power

Earthing systemdirect, impedant,compensated, isolated

Detection phase and earth fault

Settingon site by dip switch

Installationwall mounted3 phases or / and earth CT

Easergy Flair 2xd

digital

Phase and earth fault indicator for underground network

Self powered by CTs

Measurementammeter,maximeter

Detectionphase and earth fault

Settingon site by dip switch or with keyboard

InstallationDIN formatintegrated into switch-gear

DAX

digital

Phase and earth fault indicator for underground network

Lithium battery power and/or LV power

direct,impedant

Detectionphase and earth fault

Settingon site by HMI through push buttons

Installationwall mounted3 phases or / and earth CT

Fault passage indicatorOverhead network control units

ADVCEasergyT200P

EasergyFlite

ControlControls recloser

ProtectionPhase and earth current, directional, voltage, frequency, harmonics

DetectionPhase and earth faults, directional

MeasurementCurrent, voltage, real power, power factor, demand, harmonics, supply outages, waveform capture

SettingBy laptop, operator control panel, Scada

InstallationMounted on the pole or substation frame

ProtocolsDNP3, IEC 870-5-101/104Modbus/IP and DNP3/IP

CommunicationRadio, modem, GSM, V23, RS232, RS485, 10BaseT Ethernet

Switch or sectionaliser monitoring and control unitFault indicator: phase and earth fault

MeasurementCurrent, voltage, real power, reactive power, power factor, demand, cos

Capacity2 switches

Battery auto nomy16h

Motorisation voltage24-48 Vdc

ProtocolsModbus, Modbus/IP,IEC 870-5-101/104, DNP3, DNP3/IP

CommunicationRadio, PSTN, GSM, GPRS

Detectionphase and earth fault

Settingon site by dip switch

Installationclip on or polemounted

Earthing systemdirect,impedant,compensated,isolated

Associated with a pole mounted switch

Ensures remote controland automated management

Advanced controller associated with N, U and W Series reclosers, and RL Series sectionaliser

Remote setting with WSOS moni-toring and control software

Electronics sealed to IP65, 316 grade stainless steel enclosure

Earth andphase-to-phase fault indicatorsfor overheaddistribution lines

Lithium battery power

digital digital digital

38

IEC/ANSI

1250 A

25 kA

SF6

Fixed circuit breaker

Front or side mountedmechanism

VIP integrated trip unit (without auxiliary power supply) in SFset up to 24 kV

SF1, SFset

38

Manual or automatic load break switch

Sectionaliser capabilities on voltage and current

Advanced protection, control and communication

Remote controlled with ADVC controller

EasergyFlite 116-SA/G200

Communicating fault cur-rent detector for overhead lines Single-phase ammetric detector

Detection Phase-to-phase and phase-to-earth fault

Installation clip on or G200 pole mounted

Protocols IEC 870-5-101, Serial DNP3 and TCP/IP, Modbus

Communication 915 MHz short range radio communication 1 SCADA communication port Transmission interface: radio, GSM, GPRS