POWER Inverters

www.nexenenergy.us

12v, 24v and 48v Low Frequency Inverters

120vac /240vac Split Phase Current

10msec Automatic Transfer Switch

State-of-Art Auto Load Sense & Power Saver

Pure Sinewave Output Current

Features

Nexen Energy have brought together the latest in engineering and manufacturing process of advanced DC to AC power electronic products. Our Power Inverters are an All-In-One Power package designed for multiple applications.

Solar Renewable Energy Requirements

Uniteruptable Power Supply Solution

House Energy Source and Backup

Business Energy Source and Backup

Vehicles with AC Energy Requirements

Applications

Power InverterA Series

+1 305 505 5586

info@nexenenergy.us

www.nexenenergy.us

DC Power Source Usage Alternative

Multi Stage Smart Integrated Battery Charger

Built-In LED Monitor Display

A Series Power Inverters

Direct Connect Terminal Block

Allows a 300 percent surge capacity for up to 20 seconds

Pure Sine Wave Output

Effectively run sensitive equipments

Built-In Transfer and Charger

Built in smart battery charger of 65 amps and automatic transfer

switch of 80 amps

AGS - Automatic Generator Start Bulit-In Automatic Generator Start function for a complete

backup solution.

Conformal-Coated Boards

Allows this inverter great for mobile applications

Low Frequency

Low Level harmonic distortion DC to AC inversion process

Key Features

Inverter

High overload ability up to 300% rated power (20 sec)Low voltage trip selectable (9.5V/10V or 10V/10.5V) ePower saver to 10W (3 sec sensing cycle)/3W (30s sensing cycle)DC13V battery recover point, dedicated for solar system

Charger

3 step intelligent battery charging (bulk, absorption, and float)8 pre set battery type (Flooded, Gel, AGM) Battery SelectorPowerful charge rate up to 90A, selectable from 0-100%PFC (Power Factor Correction) Technology for less power usage

Transfer

10ms typical transfer time between battery and AC15s delay before transfer when AC resumes for extra protectionInput AC voltage range selectable (184-253V or 154-253V) 30/40A Through Current AbilityAllows start up and through power with depleted batteries

ControlsSwitch the unit on/off, select/deselect power saver mode17 alarms/warnings for easier operation and trouble-shootingFront panel LED indicators and adjustable switch selectorsBattery/AC priority switch available for off grid solar applicationLow/high battery, overload, over temperature protection circuitryRS232/USB communication port availableGenerator compatible

All-In-One Our inverter is a 3 products in one: It is an inverter that converts 12,24 and 48V DC (direct current) power into 120V AC (alternating current) electricity to power tools and appliances. With a built-in transfer switch that will automatically switch between shore power and battery-bank power within 10 mili seconds on a backup appliation. An AC-to-DC battery converter charger uses AC power from the grid or from a generator to recharge a battery bank.The battery-type selector on the top of the inverter charger allows the ability to adjust the charging voltage to the battery bank.

Input wave form:

Nominal voltage:

Low voltage trip:

Low voltage re engage:

High voltage trip:

High voltage re engage:

Max input AC voltage:

Nominal input frequency:

Low frequency trip:

High frequency trip:

Output wave form:

Overload protection:

Short circuit protection:

Transfer switch rating:

Efficiency on line transfer mode:

Line transfer time:

Bypass without battery connected:

Max bypass current:

Bypass over load current:

Output wave form:

Output continuous power watts: 1000 2000 3000 4000 6000 12000

Output continuous power VA: 1000 2000 3000 4000 6000 12000

Power factor:

Nominal output voltage rms:

Output voltage regulation:

Output frequency:

Nominal efficiency:

Surge ratings: 3000 6000 9000 12000 18000 32000

Short circuit protection:

Nominal input voltage:

Minimum start voltage:

Low battery alarm:

Low battery trip:

High voltage alarm:

Power saver:

Power saver:

Input voltage range:

Output voltage:

Charger current:

Battery initial voltage for start up:

Over charger protection shutdown:

35A/70A

0-15.7V for 12V(*2 for 24V; *4 for 48V)

15.7V for 12V(*2 for 24V; *4 for 48V)

Below 25 watts when enabled（）

Same switched on/off on remote

Charger mode specifications:

95-127VAC 194-243VAC/164-243VAC(W)

Dependent on battery type

10V 20V 40V

16V 32V 64V

10V 20V 40V

10.5V 21V 42V

+-/10% rms

50Hz+/-0.3Hz or 60Hz+/-0.3Hz

>88%

Yes, fault after 10 secs

Inverter specification/input:

12V 24V 48V

30 amp or 40 amp

35 amp or 45 amp: alarm

Inverter specification/output

Pure sine wave or quasi sine wave

0.9-1.0

120/230VAC

Circuit breaker

Circuit breaker

30 amp or 40 amp

95%+

10 ms typical

Yes

150VAC 270VAC

50Hz or 60Hz(Auto detect)

47Hz for 50Hz, 57Hz for 60Hz

55Hz for 50Hz, 65Hz for 60Hz

(Bypass mode) same as input

100V+/-4% 196V/164+/-4%

140V+/-4% 253V+/-4%

135V+/-4% 243V+/-4%

General specifications:

Sine wave (Utility or generator)

120VAC 120/240VAC

90V+/-4% 184V/154V+/-4%

Technical Specifications

Nexen LLC

Sales & Service

+1 305 505 5586 info@nexenenergy.uswww.nexenenergy.us

APC PRODUCT RANGE

SWITCH YOUR ENERGY NEEDS TO EFFICIENT RENEWABLE TECHNOLOGIES.

FROM STORED ENERGY TO ENERGY GENERATION , WE'VE GOT YOU COVERED.

NEXEN ENERGY GREEN SOLUTIONS

ENJOY THE SUNNY SIDE OF OUR SOLUTIONS

Nexen LLC

T. +1 (305) 505 5586

info@nexenenergy.us www.nexenenergy.us