Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
February 2018
www.postwink.co.za ; www.facebook.com/postwink.
National/Cape Town: Tel: 021 447 8783; [email protected]
Gauteng: Tel: 011 805 0518; [email protected]
TABLE OF CONTENT Page
Why Postwink? 3
What our clients are saying about us… 3
1. EcoCylinder Recycling Bins – Meet our Bestsellers 4
2. Fabric-coated Cardboard bins 5
3. Pearly-Yon Cardboard bin 5
4. Wide Litter Bins 5
5. Colour top bin 6
6. Ferro Recycling Bin 6
7. INDI Galvanized Steel bin 6
8. The Sesame- A Sensor- Touchless Kitchen Bin 7
8.1 Sesame- Battery Charger 7
9. Silver-Coated Recycle Bin 8
10. The Titanic Recycling Station 8
11. The Monochrome 3-Compartment Recycle Bin 9
12. INOX Stainless Steel Range 10
13. Custom-made Leather-Touch Recycling Bins 11
14. Confidential Bins and Clothing Banks 12
14.1 The Confidential Leather-Touch 12
14.2 The Confidential Mild Steel Bin 12
14.3 The Confidential Wheelie bin 12
15. Deskside Paper Bin 13
16. The Little Steel- Waste Paper Bin 13
17. MINI Leather-Touch Desk Side Bin 13
18. Modular deskside bin 13
19. Recycling Trolley Bins 14
20. Wall Mounted Bins 14
20.1 Half Moon Wall Mounted Waste Bin 14
20.2 Pole Bin 14
21. Street Bin 15
22. T- Bins 15
23. Cement cobble bins 15
24. Wheelie Bins & Labels 16
25. Recycling POD 17
26. Modular Recycling Bin Set 17
27. The Postwink Igloo 18
28. Garden Composter 19
29. Worm Oasis – An Introduction to Vermiculture 19
30. Dolly 19
31. Recycling Labels – Available for any Recycling Bins 20
32. BACTERRORIST – the Enzyme cleaning solution 21
How do I place an Order? 22
Contact Information 22
Some of our Corporate Clients 23
Page 3- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
OUR MISSION STATEMENT: Using quality products and outstanding service, Postwink strives to ensure that our Clients
recycle the most effectively they can – hence making a difference to the environment, while helping our Clients’
stakeholders understand and appreciate “Sustainability” thinking- whether in South Africa or beyond our borders.
Why Postwink?
� We are an expert resource for all aspects of a recycling initiative start-up. This includes the bins, access to a wide
range of reputable waste management companies, ideas on how to launch and communicate your project,
and training of your staff.
� We have helped over 1050 clients (many of whom are household names) set up successful recycling initiatives
� We have recycling bins to suit any and every recycling initiative, and these are designed to complement even
the most sophisticated office space and brand.
� Our clearly marked recycling bins ensure your recyclables are not contaminated, hence increasing both your
recycling rate and the value of your recyclables.
� We use only high-quality materials in the manufacture of our products and it goes without saying that all our
bins are recyclable – some even include recycled materials.
� We support local industry by manufacturing our products in South Africa.
� We deliver throughout the country, as well as to Namibia and Botswana.
� We can offer you a more comprehensive solution, depending on your needs: from access to our information
portal, to training to more personalized consulting.
� All our prices include a contribution towards tree-planting programmes that have a strong focus on the
upliftment of South African communities. To date, we have planted over 440 trees and bamboo plants.
What our clients are saying about us…
Postwink has been a fantastic and supportive partner in enabling the rollout of customer recycling initiatives to
selected Engen service stations and schools. They have been more than a provider of recycling bins, in their
involvement in the planning and decision making of projects, and their support and maintenance of the facilities. -
Justin Smith, Former Head of Sustainability (Good Business Journey Programme), Woolworths Group Marketing
A huge thank you to the Postwink Team for such efficient service! Embarking on our Green Initiatives has been quite
a process, but you made the ordering and delivery of the recycling bins such a breeze! It was such a pleasure to
deal with you and the bins look very smart and neat in our offices! - Tracker, Johannesburg
Thank you for the feedback and excellent service delivery. It is pleasure to conduct business with Postwink, please
convey our appreciation to all workers and volunteers. - Safety and Environment Manager of South African National
Blood Service, Johannesburg
Good Day Guys, I would like to thank you for the exemplary service that you have rendered, I will highly recommend
your company to the other associates within the group. Once again it has been a pleasure.- Selvan, Golden Horse
Casino Hotel by Tsogo Sun, Pietermaritzburg
Sanlam has been doing business with Postwink for the past 3 years, and we have received excellent service
throughout. The products themselves are of a high quality, and very practical – customised to suite any office style.
A particular value add for us is the additional support (often not mandatory) that has been provided, in the form of
recycling advice on tailored solutions, unique product suites, and networking opportunities. We will recommend
Postwink as a worthwhile supplier.- Kulthoom Razak, former Sustainability Manager (Group Office)
Page 4- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
1. EcoCylinder Recycling Bins – Meet our Bestsellers
Our original 100 litre EcoCylinder recycling bin is rotomoulded using recyclable plastic (polyethylene) and is
extremely robust. Its removable lid with cut-out throw-in holes has a colourful, durable vinyl. Ideal for office use, it is
available in two or three compartments or for single waste use. The 2- and 3-compartment EcoCylinders include
sturdy removable inners and rope handles. Standard-size plastic bag liners can be used for all the bins.
2-waste and 3-waste EcoCylinders in Charcoal Composting EcoCylinder 1-waste EcoCylinder Matte Silver
1-waste EcoCylinder for batteries, CFL bulbs/globes, small e-waste (e.g. chargers, cellphones).
The Bestselling EcoCylinder Recycling Bin Code
1-waste EcoCylinder bin PR102
2-waste EcoCylinder bin PR126
3-waste EcoCylinder bin PR103
Food Waste EcoCylinder (no holes, on wheels with rope hands) PR165
Fitting Recycling Labels, set of 2 (A4, incl. application) * AD026
Fitting Recycling Labels, set of 2 (A3, incl. application) * AD043
Fitting castor wheels: 4 x 50mm rubber castor wheels AD040
(* Label options included in this catalogue. AD026 option incl. NO corporate logo. # Volume discounts apply from 15 units.)
Open 3-waste and 2-waste EcoCylinders
� 100-litre capacity
� 485mm diameter x 660mm height
� Sizes of throw-in holes:
o 150mm diameter for 1-waste bin;
o 140mm diameter for 2-waste bin;
o 115mm diameter for 3-waste bin.
� Labelling of the lid is layered for durability
and scratch-resistance
� Bin made of polyethylene (100%
recyclable) & is very robust.
� Available in Charcoal or Light Grey
� 2-waste & 3-waste bins have removable
sturdy bin liners & come with rope handles.
� Made in South Africa
Page 5- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
2. Fabric-coated Cardboard bins
This range of cost-effective bins is made of cardboard which has been covered with polypropylene fabric to give it
a stylish look. Ideal for offices and classrooms, it comes flat-packed for ease of transporting.
� Colours: Black, Blue, Green, Yellow, Red
� These come printed with the waste names &
icon as per photo.
� For unusual waste names, we include a Waste
label.
� Kindly check on stock levels at the time of order.
� These fit the regular sized plastic liners.
� Size: 330 x 270 x 730mm H
Fabric-coated Cardboard Bin Code
1-Compartment 330x 270 x 730mmH CB144
3. Pearly-Yon Cardboard bin
� Cardboard bin with removable lid
� Colour / Design as per image.
� Size: 350 x 350 x 600 mm H
� Not suitable for heavy loads
� Minimum quantity may apply
� Ideal for Offices, and Events.
Cardboard Bin Code
Pearly-Yon CB171
4. Wide Litter Bins
� 400mm diameter x 600mm High
� Stainless Steel Wide litter bins can be ordered with black funnel lids
or funnel swivel lids,
� Can come perforated or solid stainless steel.
� Ideal for indoor usage (#430 grade stainless steel).
Please ask about castor wheels, rubber bases or polished lids.
Wide Litter Bins: 400 dia x 600mm H Code
Wide Litter bin (solid / perforated)-no lid H630SS
Funnel lid (black) H105BL
Funnel Swivel lid (black) H039BL
Grey Plastic inner bin (when required) H031AD
Page 6- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
5. Colour top bin
� #430 grade stainless steel
� Colours available include: blue, green black,
yellow and red
� Waste names and icons as per photo
� Size 400 dia x 600mm H
6. Ferro Recycling Bin
The Ferro recycling bin is ideal to fit under counters and looks right at home in a high-end corporate environment.
� Made from Mild Steel, Powder-coated in dark grey
� 700 x 400 x 850 mm H
� Includes a bag holder for each compartment
� It has flap openings for throw-in holes, and front doors.
� Comes in 2 compartments
� Labeling can be on the flap (as per photo) or on the door.
Ferro Recycling Bin Code
FERRO mild steel Bin MS252
7. INDI Galvanized Steel bin
Made of galvanised steel, these INDI bins are ideal for indoor or outdoor, and are a practical and cost-effective
alternative to other metal bins.
� 500mm diam x 650mm tall
� Capacity: - 150 Litres
� Colours available for lid: - blue for Paper, green for
Glass, yellow for Plastic, red for Tin Cans, brown for Food
Waste/composting, charcoal for General Waste
Colour top bin 400 dia x 600mm H Code
Colour top bin incl. inner- with base SS138
Colour top bin incl. inner- no base SS139
Swivel lid AD028
Recycling BIN Code
INDI galvanized steel bin MS174
Page 7- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
8. The Sesame- A Sensor- Touchless Kitchen Bin
The Postwink Team would like to introduction the new sensor- touch 2 compartment recycling bin. This bin locks in
odours and eliminates cross-contamination of germs while making separation of waste and recyclable products
cleaner and easier.
� 2 divisions, with built-in bag holder (hidden when closed)
� Quality Material: #430 Stainless Steel;
� Capacity: 70 Litres
� Outer Dimensions: 540 x 330 x 670mm H with 920mm height
when open
� Lid automatically opens and closes with sensor technology.
� Lid can open manually with the open/close buttons, should
you prefer
� NO BATTERIES INCLUDED: takes 4 x regular +D Batteries
(Rechargeable batteries and charger are available – please
request for these to be included with your order.)
� Note the front labels can be peeled off.
� 1 Year Warranty
Product Name Code
Sesame Sensor-Touch Bin SS170
8.1 Sesame- Battery Charger
� Universal Charger for D+, AAA, and AA Batteries
� Includes 4 x rechargeable D+ Batteries
� 6 Months Warranty
Product Name Code Unit Price
Sesame-
Battery Charger AD063 R 965
Page 8- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
9. Silver-Coated Recycle Bin
This 3-compartment recycle bin is made with mild steel, powder-coated in silver. With its colour decals on the front
and the top, the silver-coated recycle bin is ideal for offices. THESE ARE NOT IDEAL FOR OUTSIDE CONDITIONS.
� Powder-coated mild steel, Includes bag holders for each
compartment
� INCLUDES colour decal on front and top, as per photo – NO corporate
logo included.
� Select from our wide range of waste names and icons for your front
vinyl, to suit your specific requirements.
� 3 throw-in holes have 3 set shapes: round, square, hexagonal.
Silver Coated Bins Code
3-compart. 950 x 345 x 800mm H MS140
2-compart. 650 x 345 x 820 mm H MS162
1-compart. 320 x 345 x 820 mm H MS161
10. The Titanic Recycling Station
This locally-made very large recycling station is ideal for corridors or canteen areas. This unit accommodates 140
Litre wheelie bins without lids that are used as liners. Note that only ONE compartment (ideally the Food Wet Waste
section) has a closing flap. THESE ARE NOT IDEAL FOR OUTSIDE CONDITIONS
TITANIC Station Code
4-Compartment -245 x 60 x 110cm
(incl. 4 wheelie bins, incl. labelling) MS309
3-Compart -185 x 60 x 110cm (incl.
3 wheelie bins, incl. labelling) MS224
2-Compart -123 x 60 x 110cm (incl.
2 wheelie bins, incl. labelling MS236
*Wheelie bin only fits inside unit without the lid, which is supplied separately
**Labels on front & top included – not on the sides.
Page 9- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
11. The Monochrome 3-Compartment Recycle Bin
This high-quality office solution is available in three colours – silver, black or white and comes with 3 x cut-out waste
names. The material used is thicker, resulting in a stronger finish than the silver-coated bin.
The Monochrome with full front branding
(Client’s own artwork)
The Monochrome bin in Black
The Monochrome bin in White
� High quality finish
� Powder coated mild steel (hence, not suitable for outside)
� Colours available: Black, White, Silver
� Dimensions: 950 x 345 x 785mm H
� Includes bag holders
� Includes cut-out lettering for waste names
� Additional branding available on request
� Oblong Throw-in-holes: 250 x 150 mm
� Made in South Africa
The Monochrome Recycling Bin Code
THE MONOCHROME – 3-compartment MS231
Monochrome half-branding & lid branding AD046
Monochrome full front branding AD056
Silver Monochrome with Client’s own artwork (half-branding) or Postwink template artwork “half-branding”
Page 10- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
12. INOX Stainless Steel Range
Stainless steel ensures a sophisticated and corporate look for both indoor or outdoor areas. Different grades of
stainless steel allow for the bins to be used both indoors and outdoors. We have 4 different designs and all designs
can be accommodate 2-, 3- or 4-compartments.
*Note that the final product may differ slightly to the above photos,
as we have improved on the manufacturing designs for more effective pricing.
4 different designs (Clockwise):
• INOX FLAP (Flat-Top)
• INOX STANDARD (Hole Top)
• INOX SLANT (Slanted front)
• INOX PEAK (Peak top)
Outer Sizes:
• FLAT 3-compart: 119 x 45 x 96cm H
• STD 3-compart: 119 x 45 x 96cm H
• SLANT 3-compart: 119 x 45 x 102cm H
• PEAK 3-compart: 119 x 45 x 105cm H
Other Specifications:
• 46Lt Plastic inner per compartment
• #430 grade for indoor. #304 outdoor
grade should not be used in direct
sunlight or extreme weather
condition.
• One quality label per door included.
• Unit Guaranteed for 1 year for any
manufacturing faults.
Add-Ons available for the above (at an additional cost):
� Flap-system to keep the throw-in holes of the Standard (Hole-top) bins covered. (our code for this: AD023)
� Corporate or personalised branding can be added, as well as additional labelling
� Perforation of the material (when required for security purposes, for example at airports)
� Stainless Steel cleaner available here (see more information on the BACTERRORIST™ in this brochure)
� Locking system available, at an extra cost of R120 per INOX bin (our code AD059).
INOX STAINLESS STEEL RANGE
Code
#430 S/Steel
Grade
Code
#304 S/Steel
Grade
Standard Hole Top : available in 1,2,3 or 4 compartments SS430241 SS304241
Flat-Top : available in 1,2,3 or 4 compartments SS430242 SS304242
Peak Top : available in 1,2,3 or 4 compartments SS430243 SS304243
Slanted Top : available in 1,2,3 or 4 compartments SS430244 SS304244
Page 11- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
13. Custom-made Leather-Touch Recycling Bins These custom-made recycling bins come in black, printed with your waste names, as well as your corporate logo at
no additional cost*. These are also scratch-resistant, require little maintenance & are ideal for indoor. They can also
include a battery-collector and can be converted to Confidential Bins or Clothing Collection bins. Note that only
the 2 or 3-compartment Medi Leather-Touch units automatically come with handles on the sides.
The variations of the leather-touch range include:
1. The MAXI LEATHER-TOUCH is a LARGE Recycling Unit for canteens / corridors, in 1, 2 or 3-divisions (Height is 80cm)
2. The MEDI LEATHER-TOUCH is a smaller version, and also comes in 1, 2 or 3-Compartment (Height is 60cm)
3. The MINI Deskside open 2-Compt bins– ideal to collect recycling “under desks” (see further in this catalogue)
MAXI 3-Compart 900x360x800m MAXI 2compart next to MEDI 3compart MAXI 1-Compart
2-Comp MEDI bin 1-comp MEDI bin MEDI 3-Compt MEDI bin to scale
(700 x 360 x 600mm H) (400 x 360 x 600mm H) (900 x 360 x 800mm H)
Leather-Touch Recycling Bins Code
MEDI 3-compart. 700 x 360 x 600mm PC120
MEDI 2-compart. 700 x 360 x 600mm PC130
MEDI 1-Compart. 400 x 360 x 600mm PC122
MAXI 3-Compart. 900 x 360 x 800mm ** PC226
MAXI 2-Compart. 900 x 360 x 800mm ** PC238
MAXI 1-Compart. 400 x 360 x 800mm ** PC233
Add-on Side Pocket for batteries (PC120/PC130) AD017
MINI Deskside 2-compt open bin PC131
*We print logos in white or in full colour –but we cannot guarantee the outcome of the colour printing onto the black
material. Kindly note that if artwork is not provided in the correct format within 4 working days of receiving the order,
lead times will be negatively affected. **Kindly note that due to the nature of the product, lead time for the leather-
touch units is approximately 4 weeks – even for small orders.
Page 12- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
14. Confidential Bins and Clothing Banks
14.1 The Confidential Leather-Touch
� Custom-made bin from ABS plastic (including recycled
content)
� 400 x 360 x 800mm High
� Includes locking system on the lid
Product Code
MAXI Confidential (come with a Paper slot) PC239
MAXI Clothing bank (come with a round hole) PC240
14.2 The Confidential Mild Steel Bin
� Made from Powder-Coated Mild steel
� Available in Black, Silver and White
� 650 x 345 x 800mm High
� Laser-cut branding “Confidential”
� Inner can be included on request
Product Code
Confidential Mild Steel – Excluding any inners MS141
14.3 The Confidential Wheelie bin
� 140 Litre wheelie bin with locking system and cut-out
paper slot
� Padlock not included
� “Paper” or “Confidential Paper” Label included
� Blue is the recommended Paper colour
� Made in South Africa
Product Code
Confidential 140L wheelie bin PI251
Page 13- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
15. Deskside Paper Bin
� Made from 100% recyclable polypropylene(PP) plastic
� Colours available: BLUE
� GREY & BLACK colours are available on request, depending
on stock levels
� 16.5 Litres : 27 x 24 x 30cm H
� Not suitable for heavy loads
DeskSide Paper Bin Code
Orders of less than 50 units PI107
Orders of 50 units and over PI107
16. The Little Steel- Waste Paper Bin
Blue for Paper, Green for Recycling – Black for General Waste
17. MINI Leather-Touch Desk Side Bin
� Custom-made from ABS plastic (including recycled content)
� Open-top 2-compartment small bin in black.
� “Leather-touch” refers to the scratch-resistant plastic material –
the bin is not made of leather.
� Printing on the bin at no extra charge; and waste names can be
changed according to your specifications.
� Dimensions: 30 x 30 x 30cm H
� Made in South Africa
Product Code
MINI Leather-touch DeskSide PC131
18. Modular deskside bin
� 35 X37 X 58cm H
� Made from rotomoulded polyethylene (100%
recyclable)
� Made in South Africa
Product Code
Deskside Bin PR169
� 24cm diameter x 30 cm
� Available colours are BLUE, GREEN, SILVER and BLACK
� Powder-Coated stainless steel
� Waste name stickers available at an additional cost
Product Code
The Little Steel H504SS
Page 14- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
19. Recycling Trolley Bins
The practical units are ideal for secure, covered public areas where the visible backboard can be used effectively
to communicate to members of the public.
4-Compart: 1150x500x1580mm H
4-Compartment Recycling Trolley
(based on powder-coated mild steel body) Code
Recycling Trolley with Backboard and inner bins, including our
branding OT210
Recycling Trolley with Backboard, NO inner bins (bag holders
only), incl. our branding. OT254
Recycling Trolley - No Backboard, inner bins included,
branding on body only OT215
20. Wall Mounted Bins
20.1 Half Moon Wall Mounted Waste Bin
� Made from Stainless Steel
� 18 X 33 X 45 cm
� Made in South Africa
Wall Mounted Bin Code
Half Moon Wall Bin H790SS
20.2 Pole Bin
50 litre Pole Bin
20 litre Pole Bin
� Made from rotomoulded plastic
� 50 litre dimensions: 768 X 1024 mm
� Currently available in green and red (other colors available on
request)
� 20 litre dimensions: 684 X 1024 mm
� Made in South Africa
Pole Bins Code
50 litre Pole Bin PI174
20 litre Pole Bin PI172
� Durable Plastic top and powder-coated body & Backboard
� All units come with wheels but can be wall-mounted instead.
� Backboard can be replaced by a soft cover top.
� Each compartment capacity: 45Litres;
� Ask us about designs in 2 or 3-compartments.
� Unit can now be ordered with bag holders instead of bin inners.
Page 15- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
21. Street Bin
� 580 x 580 x 1080 mm
� 220 litre Capacity
� Highly durable, Rotomoulded and recyclable plastic
� Other colours are available on request
Product name Product code
Street Bin PR253
22. T- Bins
This black-powder coated mild steel unit has two “arms” to fit EcoLids and clear bags. Ideal for areas where security
is important. Installation not included in our pricing. Ecolids available for: Paper, Plastic, Tin, Glass, General Waste,
Recyclables, Food, Gloves and Paper Towels.
T-Bins Code
T-Bin body (2 waste partitions) –
excluding the 2 x EcoLids SS167
EcoLid (per unit) PR105
Clear Plastic Bags (per roll of 20) AD057
23. Cement cobble bins
� 500mm diameter x 750mm H
� 70 litre bin
� Also can be done in square shape
� Ecolids available as an additional, separate item. Can be
ordered separately.
Cobble bin Code
Cement cobble bin OT111
EcoLid (per unit) PR105
Page 16- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
24. Wheelie Bins & Labels
� 240Lt wheelie bin: 580 x 600 x 1075mm high
� 140Lt wheelie bin: 587 x 482 x 1009mm high
� 770Lt wheelie bin: 750 x 1300 x 1300mm high
� 1100Lt wheelie bin: 1070 x 1265 x 1380mm high
� Colours: Green, Blue, Yellow, Red, Orange,
Black
� Cut-out holes (on the front or on top of the lid)
and locking systems available.
� Made in South Africa
Wheelie Bins Code
240 litre wheelie bin- full colour / charcoal PI202
140 litre wheelie bin- full colour / charcoal PI204
770 litre wheelie bin- green / charcoal PI234
1100 litre wheelie bin- green / charcoal PI235
Labelling, Add-ons to Wheelie bins Code
Recycling Label, Skinny, incl. application ** AD001
Recycling Label, Skinny, NO bins/application *** AD024
Wheelie Bin 240L Shaped Branding, incl. application AD045
Cut-out throw-in holes or Locking System AD010 / AD011
Bag of 50 x Lrg Clear Plastic Liners 1240x1300 40micr AD042
** Wheelie bin labels can be ordered in colours different to the standard recycling colours at an additional cost per order.
***Minimum order of 12 labels for wheelie bin labels ordered without any wheelie bins (code AD024)
1100L / 770L wheelie bin Shaped Front Branding Cut out holes on the front
240l glass bin and140l 240l plastic and glass bin 240l tin can bin
recyclables bin
Page 17- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
25. Recycling POD
� 255Lt inner capacity; 775mm wide x 1220mm high outer size
� Separation at source, into 3 removable inners/compartments.
� Ashtray on top an option for disposing of cigarette butts (ashtray
can be removed on request).
� Lockable and base can be fitted to the floor – price exclude any
Installation costs.
� Highly durable plastic, fully rotomoulded.
� Most colours available: charcoal, light grey, green, blue, yellow.
� Made in South Africa
Recycling POD Code
Recycling POD – no branding PR228
POD branding (3 sides x A2 branding) AD041
Ashtray on lid n/a
26. Modular Recycling Bin Set
Indoor Modular Unit
Modular unit witht faces cut outs
� The dimensions (1 unit): 41x41x 95cm High.
� Waste Names available: Paper, Cans, Glass, Plastics
� Monster cut-outs available at an additional cost – ideal for
schools & public spaces.
� Rotomoulded, hence highly durable for outdoor or indoor use.
� Made in South Africa
Outdoor Modular unit with branding Board
Modular Recycling Bin Sets Code
Modular Unit per unit (without inner) PR223
Branding boards per unit AD038
Monster cut outs (per unit) AD051
Page 18- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
27. The Postwink Igloo1
Postwink is proud to have designed the Postwink Igloo – a bulk container which is made in South Africa and ideal
for our special recycling environment. This igloo recycling bin neatly collects any kind of bulk recyclable waste.
Throw your recyclables into one of the three openings and these are directed into either a 1-ton capacity bulk bag
or 3 separate 210 litre drums (available separately). Importantly, these recycling igloos can be emptied by all
recycling collectors, as they only require manual handling to empty, by either opening the top or the front doors.
Postwink igloos (front view), Open, and with Front Door branding
Specifications
� Made locally from robust plastic (polyethylene), which is 100% recyclable.
� Made in South Africa – material and parts sourced in South Africa.
� Using a bulk bag, the capacity of this bin is 1000 litres.
� Products guaranteed for a year for any manufacturing defaults.
� Outer size: 140 x 130 x 150cm High, Oval throw-in hole size is 35 x 20cm
� Secure locking system: Front doors and top lid lockable using secure cam locks (1 key per igloo)
� Add-on: 1-ton capacity Bulk bags and/or 210L steel or plastic drums.
Postwink Recycling Igloo Code
Postwink Recycling Igloo 1.3 x 1.4 x 1.5m H PR305
1-ton capacity bulk bag (to use as liners that collectors can remove when full) AD012
Refurbished open-top steel drums (to use as liners for Glass collection)* AD013
Full branding: Cast UV Varnished Vinyl 2 front, 2 sides # AD015
Half-Branding: Cast UV varnished vinyl for front doors only # AD018
Note: In our experience, we strongly recommend that our recycling igloos be maintained annually to ensure they
are kept looking new. Please ask us about including this annual maintenance in your quotation.
1The Postwink Igloo design is registered in the name of Postwink Sales cc with the South African Design Office (Design registration
number F2011/00148). As such, Postwink is entitled to enforce its rights in the Design against any person who makes, imports, uses
or disposes of any article which embodies or is similar to the Design.
Page 19- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
28. Garden Composter
This 150L garden composter is meant for outside. It has no holes creating a dark moist environment, which is
important for anaerobic bacteria to thrive. The lid is lockable to ensure that your compostable waste is secured from
small animals.
� 150 litre capacity
� 730mm x 630mm
� Easy access top lid for adding waste materials
� Sliding bottom door for easy compost removal
� Has a compartment for holding pest repellent.
Product Code
Garden composter PI247
29. Worm Oasis – An Introduction to Vermiculture
This Worm farm is UV resistant, strong and durable. It includes two working trays with an additional drainage tray.
There is a built in tap that collects the worm liquid which can be used on your garden. The unit is sold together with
o block to be used in your worm bedding, a worm blanket, 500 composting worms and the instruction manual.
Product Code
Worm Oasis PR168
30. Dolly
This new dolly is rotomoulded for durability and is suitable to lift most standard bins, including the 85L ash bins,
which are often found in hotel kitchens. It can carry bins up to the weight of 120 Kgs.
Product Code
Dolly AD052
Page 20- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
31. Recycling Labels – Available for any Recycling Bins
a. Standard Recycling Labels
b. Recycling Labels with Corporate Logo option
Recycling Labels Code
Standard Wheelie Bin Labels, size 400 x 170mm (single unit incl. applic, NO logo)* AD001
Add-on a Corporate Logo to your Recycling Labels (minimum cost of R300 per order) * AD030
Page 21- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
32. BACTERRORIST – the Enzyme cleaning solution
The BACTERRORIST is an enzyme cleaner – the most effective and
nature & people-friendly way of cleaning – including your recycling
bins. See www.bacterrorist.co.za.
*Features: No petrochemicals, no phosphates, no chlorine or dyes,
no artificial fragrances.
*Usage & directions: Suitable for all stainless steel surfaces, the inside
& outside of bins, all floor surfaces, bathroom & kitchen surfaces,
including toilets, sinks and tubs. Spray directly onto dirty surfaces.
Leave for a few minutes and wipe/scrub with a cloth or sponge as
required.
*Contains a consortium of natural organisms and enzymes in a
cleaning solution.
*Biodegradability: This cleaner is readily biodegradable according
to OECD 301 standards and is blended/formulated in South Africa.
Page 22- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
How do I place an Order?
Please send your quotation or order requests by e-mail (details below). A formal quotation will then be
emailed for your approval.
Can’t find what you’re looking for? Download one of the other catalogues at
www.postwink.co.za/brochure. We have 4 catalogues in total.
Outside / Public spaces Hotels / Hospitality Schools / Colleges Office & corporate
Contact Information
National Deliveries/ Head office Gauteng Sales office
[email protected] [email protected]
Tel: 021 – 447 8783 Tel: 011- 805 0518
http://shoppostwink.co.za/- “Online shop for stock products only.”
www.facebook.com/postwink
www.twitter.com/postwink
www.postwink.co.za
Want to join the Postwink Community and receive quarterly updates?
Subscribe via our website http://www.postwink.co.za/
Our 4 comprehensive brochures:
Page 23- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
Some of our Corporate Clients
Page 24- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
Lead times and Terms & Conditions
a. Lead time
Lead times depend on the quantity ordered and the time at which the order is being placed. It will usually vary
between 1-4 weeks to the time of dispatch. Lead times start from receiving the required deposit as well as a
complete order, including receiving confirmation of colours, waste names and logos (if relevant). If information
relating to branding and product colour and/or approval of printing proofs are delayed, this will impact your
completion date. Training sessions are subject to our availability and are subject to a minimum lead time of 2 weeks.
Kindly note that due to the custom nature of the product, the lead time for the leather-touch units is approximately
4 weeks – even for small orders.
b. General Information and Terms and Conditions
All prices provided exclude VAT & delivery costs, with most products being dispatched from Cape Town or
Johannesburg (depending on the product and your location). Because of the bin sizes, certain delivery costs may
be significant; hence please request a formal quotation for a more accurate cost estimate including transport to
the required location.
Except for leather-touch bins, prices do not include the costs of corporate branding using vinyl or other methods.
Please specify your requirements in writing so that we may quote you accordingly. For all corporate logos required
printed on vinyl or otherwise, please email all corporate logos / artwork in a vector file or editable pdf file within
4 working days of placing your order, else your lead time will be negatively affected, as your order will be put on
hold until receipt of the correct, useable artwork.
Prices may vary based on quantity. Hence, please request a formal quotation based on your actual order quantity
in order to see the applicable pricing. Furthermore, kindly check your quotations carefully prior to approval, as we
cannot be responsible for incorrect quotations that are approved as orders.
Manufacturing of the order will not commence until the order has been confirmed with a 50% deposit of the total
quotation. Balance of payment is required strictly on dispatch. For the renting of EcoCylinders, Portal subscriptions
and all orders amounting to R5 000 or less, payment terms are strictly in advance. For the renting of Ecocylinders,
the R1000 per order refundable deposit will be refunded within 24 hours once the units are returned to us in good
order.
We reserve the right to deliver your order in part-shipments if we feel this makes economic and practical sense.
Products (including artwork/designs) remain the property of Postwink until the account is settled in full, even if these
have been delivered to you.
Dimensions provided in this brochure may have been rounded and may differ slightly to the actual dimensions on
manufacturing. Capacities provided in this brochure may also have been approximated for ease of
communication.
Our prices are subject to change without prior notice. This is especially true for stainless steel products, whose prices
fluctuate according to international steel prices. Prices for the training sessions will depend on the customer type,
customer location and who will perform the training. Our Prices include a contribution towards one of the tree
planting programmes that we support, including those by Food and Trees For Africa or GreenPOP. Ask us about the
number of trees purchased as a result of your order.
Page 25- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
The Stainless steel recycling units, EcoCylinders, igloos, PODs, recycling labels and posters shown herein are
Postwink’s intellectual property. Postwink is the owner of the various literary and artistic works embodied in its Designs,
brochures and website, as determined by the Copyright Act, 1978. Any unauthorised reproduction, adaptation or
publication of the work is strictly prohibited. The Postwink igloo, Pods and EcoCylinder recycling bins have moulds
which are jointly owned by Postwink and its manufacturing factory. The Postwink Igloo design has also been
registered with the South African Design Office (Design registration number F2011/00148), as well as the recycling
POD (Design registration number A2014/01539). As such, Postwink is entitled to enforce its rights in the Design against
any person who makes, imports, uses or disposes of any article which embodies or is similar to the Design. Other
products included in this brochure are our supplier’s intellectual property and hence similarly cannot be recreated
or copied without consent. Postwink is the sole distributor of the Recycling Trolley and EcoLid. Orders are subject to
our complete set of Terms and Conditions, a copy of which will be provided on request.
Prices quoted there include basic packaging, ideal for local deliveries and most domestic freight. Adequate
packaging required for overseas and long-haul freighting can be done at an added cost, and must be requested
prior to confirming your order.
Unless stated otherwise, we have standard colors for the decals and if not a standard decal there will be charges.
Prices quoted are for orders in South Africa. For quotations outside of South African borders, kindly contact
[email protected] and specify your requirement, so an accurate quote based on specific Incoterms is provided.
Export quotations can take up to 7 days. E&OE.
Page 26- All prices excl. vat & delivery - February 2018 - copyright © 2008-2018 by Postwink all rights reserved
Photo Gallery – Various Products
View more photos on http://www.postwink.co.za/photo-gallery/ Note: Images of Postwink products in our catalogues and website have been taken for the sole use of Postwink. Images and copy
may not be lifted from the Postwink brochure, website or otherwise, except when permission has been sought and granted in
writing.