Portable Magnetic Drilling Machines - CS Uniteccatalog.csunitec.com/Asset/CS Unitec MagDrills+Accessories.pdf · Designed for continuous operation, CS Unitec's portable magnetic drills

PORT

ABL

E M

AG

NET

IC D

RILL

S

• 1-800-700-5919 • Visit our Web site at www.csunitec.com2

Fast, accurate hole cutting…on the job site or in the shop!Designed for continuous operation, CS Unitec's portable magnetic drills are ideal for drilling structural steeland virtually any metal. We offer the most compact, powerful and reliable series of portable magnetic drillsfor holes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. Ourcomplete line includes electric, pneumatic and hydraulic tools. They are available for prompt delivery.

COOLMAG ™ Electromagnets

ensure that the magnet does not overheat. When themagnet is switched on for long periods of time, the coilscould overheat or even burn out. The CoolMag featurereduces the power of the magnets when the drill motor isnot active. Therefore, it won't build up heat.

CS Unitec high-density dual-coil magnets are ground, notcast, and are wound into two circles to increase thesurface area and density of the magnetic field.

CS Unitec is the industry leader in:• Power-to-weight ratios• Strongest clamping force with

high-density (HD) dual-coil magnets• Magnetic drills for tapping• Annular Cutters: TiAlN, HSS, cobalt

steel and carbide-tipped

Our drills have unique features:• Variable-speed, multiple-geared models• Electric, pneumatic and hydraulic power• Reversible motors for tapping

and machining• Swivel base stand for

hard-to-reach areas

Rugged construction andsophisticated functionality.

Custom machines for unique applications

CountersinkingReamingTappingTwist Drilling

OverheatingProtection with CoolMagCoolMag

Made in GermanyPowered by

Portable Magnetic Drilling Machines

Intuitive magnets, ergonomic controlsand simple operation for superior cuts.

Our engineers can create a drill, drill rig, or otherapplication-specific arrangement to meet your needs.See page 51 for more information, or call 1-800-700-5919 for design assistance.

ARMOR-PLATED™TiAlN Cutters

are ideal for all drillingapplications. A highsurface hardness andgreater lubricity allow fordrilling at high operatingtemperatures with morepower and speed.

Keyless, quick-change

system for annularcutters saves time

and money.Just twist and lock.

Magnetic force is the key to safety and success.The magnetic force of your magnet depends on a number of factors: æ Thickness of material being drilled æ Coatings or paint layers on material æ Chips, dirt or grease between the magnet and the material

Simple, ergonomic arrangementof controls for one-handedoperation. Emergency-offfunction for quick shutdown.

High power at low speeds.Electronic torque controlprevents damage to motor.

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

PORT

ABL

E M

AG

NET

IC D

RILL

S

3

Integrated cable routing: MAB Series

The new generation of our MAB portable magnetic drillingmachines has been developed for increased safety. Thisincludes complete cable routing within the casing.

æ No threading and getting caught

æ No tearing or snapping off

the payback is in the performance.

Our Electronic Safety Shutoff Sensorautomatically shuts down the drill motor if the magnetloses contact with the material. This emergency-offfeature helps to protect both operator and equipment.

Electronic SafetyShutoff Sensor

SafeMagSystem

for Active SafetyIQ Magnetic System

LED green... the magneticadhesion meets the minimumrequirements. Drilling can take place.

LED red… insufficient magnetic force.Drilling should not take place. Possible causes aretoo-thin material, coatings of paint, scale or zinc.

The SAFEMAG™ System measures whether the magnet has sufficient adhesive force onthe material. An LED indicator on the switch panel warns you of insufficient magnetic force(Red Light) or tells you if the correct force is present (Green Light).

The value is in the engineering…

PORT

ABL

E M

AG

NET

IC D

RILL

SMagnetic Drill Comparison Chart


P1Page 8

MDM 40Page 10

MAB 150Page 12

MAB 425 Page 14

MAB 455 Page 16

MAB 485 Page 18

MAB 525 Page 20

MAB 825MAB 845Page 22

Annular CuttersDiameter (ø)

up to ø 1-3/8" up to ø 1-1/2" up to ø 1-1/2" up to ø 1-3/8" up to ø 2" up to ø 2" up to ø 2-1/2" up to ø 4"

Twist DrillsDiameter (ø)

up to ø 1/2" up to ø 5/8" up to ø 7/8" up to ø 7/8" up to ø 1" up to ø 1-1/4"

TappingDiameter (ø)

up to ø 15/16" up to ø 15/16" up to ø 1-1/8"

CountersinkingDiameter (ø)

up to ø 1-9/16" up to ø 2" up to ø 2"

ReamingDiameter (ø)

up to ø 3/4" up to ø 7/8" up to ø 1-1/4"

Stroke 6-1/3" 3-1/8" 1" 6-1/3" 6-1/3" 6-1/3" 6-1/3" 10"

Weight 26-1/2 lbs. 24 lbs. 24 lbs. 29 lbs. 29 lbs. 29 lbs. 35 lbs. 55 lbs.

Speed Range 1(RPM)

400 440 400 430 250 50-250 70-280 40-110

Speed Range 2(RPM)

760 450 100-450 180-580 65-175

Speed Range 3(RPM)

140-360

Speed Range 4(RPM)

220-600

� � �

� � �

� � � � �

Electronic SafetyShutoff Sensor

� � � � � �

Tool Holder Set Screw Set Screw Set Screw Set Screw Quick-changekeyless

Quick-changekeyless

Quick-changekeyless

Quick-changekeyless

Morse Taper (MT) MT2 MT2 MT3 MT3

Safety FrictionClutch

�

Torque Control � �

Swivel Base �

Magnet Size 6-5/8" x 3-1/3" 6-1/2" x 3-1/4" 6-5/16" x3-3/16"

6-5/8" x 3-1/3 6-5/8" x 3-1/3 6-5/8" x 3-1/3 7-1/8" x 3-1/2" 8-5/8" x 4-1/3"

SafeMagSystem

CoolMAGCoolMag

PORT

ABL

E M

AG

NET

IC D

RILL

S

• 1-800-700-5919 • Visit our Web site at www.csunitec.com 7


Max. hole diameterup to 5-1/8"

Max. twist drillingup to 1-3/4"

Max. tappingup to 1-5/8"

PneumaticHydraulic

Allows thread cutting

Overheatingprotection

Magnet adhesionindicator

Shuts down motor ifmagnetic contact lost

Swivel base through30˚ and 3/4"

MAB 1300Page 24

AIRBOR™

Page 32

HB 4400Page 33

AutoMAB1500Page 27

CSU 32ACCSU 32RLPage 28

CSU 50ACCSU 50RLPage 29

CSU 80ACPage 30

CSU 100/3Page 31

up to ø 5-1/8" up to ø 2-1/16" up to ø 2-1/16" up to ø 1-1/2" up to ø 1-1/4" up to ø 2" up to ø 3-3/16" up to ø 4"

up to ø 1-3/4" up to ø 1/2" up to ø 1/2" up to ø 1/2" up to ø 7/8" up to ø 1-1/4" up to ø 1-1/4"

up to ø 1-5/8" up to ø 3/4"

(CSU 32RL only)

up to ø 15/16"

(CSU 50RL only)

up to ø 1-1/8"

up to ø 3"

up to ø 2"

3.35"(12" w/out retainer)

up to 10-1/4" 3-3/4" 3" 5-3/4" 6" 10" 10"

112 lbs. 43 lbs. 48-1/2 lbs. 37-1/2 lbs. 24 lbs. 29 lbs. 57 lbs. 57 lbs.

30-80 400 0-630 360 450 250 100 40-140

50-120 450 175 120-480

130-350 245

210-550 385

� �(CSU 32RL only)

�(CSU 50RL only)

�

� � � � �

� � � � �

�

Set Screw Set Screw Set Screw Set Screw Set Screw Quick-changekeyless

Quick-changekeyless

Quick-changekeyless

MT4 MT2 MT3 MT3

�

� � � � � �

�

14" x 4-3/4" 8-3/4" x 3-1/2" 7-1/4" x 3" 7-1/8" x 3-1/2" 6-5/16" x 3-1/4" 6-1/2 x 3-1/2" 9" x 4-3/8" 9" x 4"

SpecialFeaturesSpecialFeatures

PORT

ABL

E M

AG

NET

IC D

RILL

SP1Lightweight, powerful drill for holes up to 1-3/8" dia.


Powerful • Reliable

• 10 Amp double-insulated motor

• Compact, 13" high

• Lightweight, 26.5 lbs.

• Designed for heavy-duty use

Drill up to 1-3/8" dia.

• Uses annular cutters or twistdrills

• Twist drilling up to 1/2" diameterwith optional 3-jaw chuck(IBC 18), stroke length 4"

• Internal lubrication withpressure pump bottle


Integrated Safety

• Simple, ergonomic arrangementof controls for one-handedoperation

• Emergency-off function

8

�Annular Cutters: pages 34-41 �Accessories: pages 42-50

Cutter capacity 1 3/8" dia.

400ø 13/8"

Cutter Capacity Speed Range (RPM)

ø 1/2"

Twist Drill /Countersink

61/3"

Stroke(length)

Equipped with Electronic Safety Shutoff Sensor

With a 1/2" chuck (Part No.IBC 18), this model easilyconverts to a standard drillpress with a 4" stroke forconventional twist drills.

Pressure pumpbottle providesautomaticinternallubrication(included).

4"stroke

Adjustable Precision Guidance

Switches forPower andMagneticAdhesion

PORT

ABL

E M

AG

NET

IC D

RILL

S



Model P1

312

334

41,9

246

269 163

84

117

168

48

P1 Specifications

Model P1 Specifications

Motor Power 10 Amp / 110 Volt

Weight 26.5 lbs.

Hole Capacity 13/8" dia.

Speed 400 RPM

Magnet Base Size 31/3" W x 65/8" L

Dimensions 13" H x 11" L x 61/2" W

Magnetic Force (1" plate) 3750 lbs.

Arbor Bore 3/4"

Lubrication Manual, with pressure pump

* 220 Volt / 50 Hz also available


9

10.59" 6.42"

4.61"

9.69"1.65"

13.1

5"

12.2

8"

See pages 34-41 for our HSS, TiAlNand Carbide-tipped cutters.

See page 42-50for lubricants, including cutting oil and pastes, as well asother portable magnetic drill accessories.

1.89"

3.31"6.61"

StandardEquipmentalso includesauto lubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.

1 Magnetic drilling machine

1 Pilot pin

1 Plastic carrying case

1 Safety chain

1 Hexagon socket screw key SW 4

1 Cutting oil pump bottle

1 Operating manual

1 Warranty certificate

Standard Equipment

Optional 1/2" gearedchuck (Part No. IBC 18) to convert theP1 to a standard drillpress with a 4" stroke.


MDM 40Heavy-duty compact hole drilling machinewith internal cable routing


• 9.25 Amp double-insulated motor

• Compact, 13" high

• Lightweight, 24 lbs.

• Designed for continuous use

• Intelligent electronic torquecontrol


• Uses annular cutters

• Integrated cutting oil reservoir

• Automatic internal lubrication

440ø 11/2"



Special Feature

• Internal cable routing protects themotor power cord from externaldamage


31/8"

Stroke(length)


PORT

ABL

E M

AG

NET

IC D

RILL

S

10


All CS Unitechigh-density

dual-coil magnetsare ground, not cast,and are wound into twocircles to increase the

surface area and density ofthe magnetic field.


† Steel case intendedmainly for shippingpurposes; damagemay occur in transit.

Model MDM 40

MDM 40 Specifications

Model MDM 40 Specifications

Motor Power 9.25 Amp / 110 Volt

Weight 24 lbs.


Speed 440 RPM

Magnet Base Size 61/2" L x 31/4" W

Dimensions 13" H x 91/2" L x 7" W


Arbor Bore 3/4"

Automatic Lubrication Included



Standard Equipment


1 Pilot pin

1 Steel shipping case†

1 Safety chain


1 Operating manual




PORT

ABL

E M

AG

NET

IC D

RILL

S

11


6.5"

9.5" 7"

13"

3.25"

400ø 11/2"


1"

Stroke(length)

PORT

ABL

E M

AG

NET

IC D

RILL

SMAB 150Horizontal motor mount for drilling in tight spacesCutter capacity

1 1/2" dia.


* Model MAB 150 accepts cutters with a 3/4" weldonshank and a maximum depth of cut of 1".

Switches for powerand magnet adhesion

are arranged forsimple,

uncomplicatedoperation.



• Ultra compact, 7" high

• Lightweight, 24 lbs.



Drill up to 1-1/2" dia.*





Integrated Safety

• Internal cable routing


12


Internalcable routing

protects the motorpower cord fromexternal damage

Optional ratchet-styleadvancing mechanismfor work in spaces with

limited clearance.(14mm square drive)

Automatic internallubrication withpressure pump bottle

MAB 150 uses standard3/4" shank annular cutters

PORT

ABL

E M

AG

NET

IC D

RILL

S

Cutter capacity1 1/2" dia.



† Steel case intendedmainly for shippingpurposes; damagemay occur in transit.

Advancing lever can be mounted on eitherthe left or right side of the MAB 150.

Model MAB 150

MAB 150 Specifications

Model MAB 150 Specifications


Weight 24 lbs.


Speed 400 RPM

Magnet Base Size 65/16" L x 33/16" W

Dimensions 7" H x 127/8" L x 71/2" W


Arbor Bore 3/4"




13

Standard Equipment


1 Pilot pin

1 Steel shipping case†

1 Safety chain


1 Operating manual



7.0

9"

Model MAB 150 accepts cutters with3/4" weldon shank. This unit has amaximum depth of cut of 1".


1.30" 6.30"

12.87" 7.44"

3.15"

1.73"

430 / 760ø 13/8"


ø 5/8"


SafeMag™

Magnet ForceIndicator

61/3"

Stroke(length)

PORT

ABL

E M

AG

NET

IC D

RILL

SMAB 425High speed and two gears for cutting and twist drillingCutter capacity

1 3/8" dia.


With a 1/2" chuck (Part No.IBC 17), this model easilyconverts to a standard drillpress with a 7 1/2" stroke for

conventional twist drills.



• 15-1/2" high, 29 lbs.

• High-speed, 2-speed gearbox,ideal for annular cutters andtwist drills





• Twist drilling up to 5/8" diameterwith optional chuck (IBC 17)




Integrated Safety

• Green/Red LED magnetic forceindicator for safe operation




14


The high speed of the MAB 425 is a great match forthe TCT Hornet series of sintered carbide annular

cutters. See page 40-41 for more information.



Equipped with Electronic Safety Shutoff Sensor (see p. 3)

71/2"stroke

PORT

ABL

E M

AG

NET

IC D

RILL

S




Model MAB 425




Weight 29 lbs.


Twist Drill Capacity 5/8" dia.

Speeds 430 / 760 (2 gears)


Dimensions 151/2" H x 111/2" L x 61/3" W


Arbor Bore 3/4"




15

Standard Equipment


1 Pilot pin

1 Molded plastic carrying case

1 Safety chain


1 Operating manual



3.31"2.40"

15.4

7 -

21.4

6"

11.50" 6.30"

14.6

1"

6.61"

1.22"

250 / 450ø 2"

Cutter Capacity Two-Speed (RPM)

ø 7/8"


SafeMag™


61/3"

Stroke(length)

PORT

ABL

E M

AG

NET

IC D

RILL

SMAB 455High power with keyless quick-change chuck systemCutter capacity

2" dia.


With a 3/4" chuck (Part No.IBC 22), or MT2, this modeleasily converts to a standarddrill press with a 5" stroke for




• 17-1/4" high, 29 lbs.




Drill up to 2" dia.


• Twist drilling up to 7/8" (with optional chuck IBC 22)




Keyless Cutter Mount

• Quick-change keyless cuttersystem for 3/4" Weldon shank

Integrated Safety

• Green/Red LED magneticforce indicator for safeoperation


• Simple, ergonomicarrangement of controls forone-handed operation


16





PORT

ABL

E M

AG

NET

IC D

RILL

S

Cutter capacity 2" dia.


StandardEquipmentalso includesmolded plasticcarrying case,operatingmanual, autolubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.

Model MAB 455




Weight 29 lbs.

Hole Capacity 2" dia.


Speeds 250 / 450 RPM (2 gears)


Dimensions 171/4" H x 115/8" L x 7" W


Arbor Bore 3/4"

Spindle MT2




17

Standard Equipment


1 Quick-change arbor system

KEYLESS Weldon 3/4"

2 Pilot pins - 1" and 2" depth

1 Safety chain

1 Drift key MT2



2.24"

1.50"

3.4

6"

11.61" 7.01"

14.6

1"

6.61"

17.2

4 -

23.5

4"

3.31"

50-250100-450

ø 2"

Cutter Capacity 2-gear VariableSpeed (RPM)

ø 7/8" / ø 19/16


SafeMag™


61/3"

Stroke(length)

PORT

ABL

E M

AG

NET

IC D

RILL

SMAB 485Versatile for workshop and assembly applicationsCutter capacity

2" dia.




• 17-1/4" high, 29 lbs.

• High-speed, variable-speedoilbath gearbox, ideal forannular cutters and twist drills



Drill up to 2" dia.Tap up to 15/16" dia.


• Twist drilling up to 7/8" dia.(with optional chuck IBC 22)

• Tapping capacity 3/16"to 15/16" dia.






Integrated Safety





18


Variable-speedControl

Electronics

CoolMag™

OverheatProtection

Reversible(CW/CCW)

ø 3/4" /ø 15/16"

Ream /Tap

Optional Geared Chuck

With a 3/4" chuck (Part No. IBC 22), or MT2, thismodel easily converts to a standard drill presswith a 5" stroke for conventional twist drills.




PORT

ABL

E M

AG

NET

IC D

RILL

S




Model MAB 485




Weight 29 lbs.



Tapping Capacity 15/16" dia.

Speeds 50-250 and 100-450 RPM




Arbor Bore 3/4"

Spindle MT2




19

Standard Equipment



KEYLESS Weldon 3/4"


1 Safety chain

1 Drift key MT2

1 Geared drill chuck with MT2

Tap collet adapters - 3/8", 1/2"

and 3/4"



1.50"

3.4

6"

Shown with optional Pipe Saddle ClampSystem for safe, secure drilling of pipes andtubular material. See page 50 for details.

11.61" 7.01"

14.6

1"

6.61"

17.2

4 -

23.5

4"

2.24" 3.31"

70-280180-580

ø 21/2"


ø 1" / ø 2"


SafeMag™


61/3"

Stroke(length)

MAB 525High power, ideal for production useCutter capacity

2 1/2" dia.




• 19" high, 35 lbs.

• High-speed, 2-speed oilbathgearbox, ideal for annularcutters and twist drills



Drill up to 2-1/2" dia.Tap up to 15/16" dia.


• Twist drilling up to 1"(with optional chuck IBC 21)

• Tapping capacity 15/16"






20



Electronics

CoolMag™

OverheatProtection

ø 7/8" /ø 15/16"

Ream / Tap

Reversible(CW/CCW)

PORT

ABL

E M

AG

NET

IC D

RILL

S




With a 3/4"chuck (Part No.IBC 21), or MT3,this model easilyconverts to astandard drillpress with a 5"

stroke forconventionaltwist drills.

Integrated Safety

• Green/Red LED magnetic force indicator for safe operation


• Simple, ergonomic arrangement of controls for one-handed operation


PORT

ABL

E M

AG

NET

IC D

RILL

S




Model MAB 525

19.1

7 - 2

5.08

”

14.6

0”

3.54

”

1.33”

2.08” 7.09”

6.73”

3.54”

11.65”




Weight 35 lbs.


Twist Drill Capacity 1" dia.


Speeds 70-280 and 180-580 RPM


Dimensions 19" H x 113/4" L x 63/4" W


Arbor Bore 3/4"

Spindle MT3




21

Standard Equipment



KEYLESS Weldon 3/4"


1 Safety chain

1 Drift key MT3

1 Geared drill chuck with MT3

Tap collet adapters - 1/4", 3/8",

1/2" and 3/4"




ø 4"


ø 11/4" / ø 2"


SafeMag™


10"

Stroke(length)

PORT

ABL

E M

AG

NET

IC D

RILL

S

Ideal for steel engineering, plant construction and moreCutter capacity 4" dia.




• 4-speed oilbath gearbox forapplications requiring highpower


• Infinitely variable torque control and full-wave control electronics

Drill up to 4" dia.Tap up to 1-1/8" dia.


• Twist drilling and reaming up to 1-1/4" dia.

• Tapping up to 1-1/8"

• Optional geared chuck IBC 21



• Swivel base (model MAB 845)

MAB 825




• Arbor for 1-1/4" Weldon shank

Integrated Safety



• Simple, ergonomic arrangement of controls for one-handed operation


22


Electronics

CoolMag™

OverheatProtection

ø 11/4" / ø 11/8"

Ream / Tap Reversible(CW/CCW)

40-11065-175140-360220-600




For swivelbase, orderMAB 845(see page 23)

MAB 825 &MAB 845

OptionalPower AssistSee page 44

4 Gearswith Variable

Speed

Countersinking

Reaming

Tapping

Twist Drilling

PORT

ABL

E M

AG

NET

IC D

RILL

S



StandardEquipmentalso includesoperatingmanual, autolubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.

Model MAB 825 & 845

MAB 825 &MAB 845 Specifications

Model MAB 825 & 845 Specifications


Weight 55 lbs.




Speeds 40-110, 65-175140-360, 220-600 RPM




Arbor Bore 3/4" and 11/4", standard

Spindle MT3


Swivel Base Order MAB 845



23

Standard Equipment



KEYLESS Weldon 3/4"

1 Arbor 11/4" Weldon, MT3

4 Pilot pins - 1", 2", 3" and 4" depth

1 Safety chain


1 Drift key MT3


1 Carrying case


Model MAB 845 features a swivelbase providing 30˚ movement leftand right and 3/4" forward andbackward.

3/4"

30°

4.33"1.65"2.58"

1.85"

14.41" 9.41"

22.0

5"

8.66"

18.7

0 -

28.5

4"

Rolling Transport Case

Optional robust transport case withwheels, carrying handle and sturdyclosures. Protect your MAB825/845 from water and dust withthis rugged case.

Order No. ZHK 825

PORT

ABL

E M

AG

NET

IC D

RILL

SMAB 1300Large holes – up to 51/8" diameterTapping up to 15/8" diameter





• 34-1/2" high, 112 lbs.

• 4-speed oilbath gearbox forapplications requiring high power


• Infinitely variable torque controland full-wave control electronics

Drill up to 5-1/8" dia.Tap up to 1-5/8" dia.

• Uses annular cutters7/16" to 5-1/8" dia., 1" and 2" depth13/16" to 4-3/4" dia. for 4" depth

• Twist drilling up to 1-3/4" - usesMT4, countersinking up to 3" dia.

• Tapping up to 1-5/8"

• Reaming up to 2"



Integrated Safety


• Equipped with Electronic SafetyShutoff Sensor (see p. 3)


24

ø 5-1/8"


ø 1-3/4" / ø 3"


SafeMag™


3.35"(12" withoutretainer)

Stroke(length)


Electronics

CoolMag™

OverheatProtection

ø 2" / ø 1-5/8"

Ream / Tap Reversible(CW/CCW)

30-8050-120130-350210-550

Ideal for use with TCT Carbide cutters

up to 51/8" dia. –see pages 40-41.

Power Assist,standard

See page 44


Speed

OptionalSpecial-PurposeCutting Tool

Countersinking

Reaming

Tapping

Twist Drilling

Equipped withElectronic

Safety ShutoffSensor (see p. 3)

PORT

ABL

E M

AG

NET

IC D

RILL

S




Model MAB 1300




Weight 112 lbs.

Hole Capacity 51/8" dia.**



Speeds 30-80, 50-120130-350, 210-550 RPM

Magnet Base Size 43/4" W x 14" L


Magnetic Force (1" plate) 23,600 lbs.

Arbor Bore 11/4" (3/4" adapter included)

Spindle MT4


* 220 Volt / 50 Hz also available** Maximum hole diameter is with TCT Carbide cutters - see p. 40-41.


25

Standard Equipment


1 Carrying case on wheels

1 Arbor adapter to 3/4" Weldon

1 Safety chain

1 Hexagon socket screw key SW6

1 Drift key MT4

1 Operating manual



4.72"3.26"

2"

Accessories

10"

27"

14.17"

22.0

5 -

34.4

5"

19.5"

See page 26for tappingaccessoriesand wheeledcarrying case.

ZHK 1300wheeled

carrying caseincluded with

MAB 1300

PORT

ABL

E M

AG

NET

IC D

RILL

SMAB 1300 Accessories




26


Tap Collets and Reducing Adapters

Thread Order No.1/4 ZGT-1/45/16 ZGT-5/163/8 ZGT-3/87/16 ZGT-7/161/2 ZGT-1/29/16 ZGT-9/16

Thread Order No.5/8 ZGT-5/811/16 ZGT-11/163/4 ZGT-3/41 ZGA 033

(1-1/4" Weldon shank)1-1/4 ZGA 042 (1-1/4" Weldon shank)

Order Morse Tap Tap Shank Tap ShankNumber Taper Size Diameter SquareCS 70308 3 5/8" .480 .366CS 70301 3 3/4" .590 .442CS 70302 3 7/8" .697 .523CS 70303 3 1" .800 .600CS 70304 3 1-1/8" .896 .672CS 70403 4 1" .800 .600CS 70404 4 1-1/8" .896 .672CS 70405 4 1-1/4" 1.021 .766CS 70406 4 1-3/8" 1.108 .831CS 70407 4 1-1/2" 1.233 .925CS 70408 4 1-5/8" 1.305 .979

Tap Collets with 3/4" or 1-1/4" Weldon shankall threads shown are ASA Standard (or DIN 376 for metric)

Watertight, shock-proof and robust –the right protection for your machine.

Four large ABS locks securethe robust plastic case

Order No. ZHK 1300

Robust transport case with wheels, carrying handle andsturdy closures. Protect your investment from water anddust with this rugged case. Four large ABS locks and an

interior configuration customized for machine to securedrill and accessories during

transit. Lightweight, heavy-duty plastic constructionand robust ABS wheels.

Drill not included withZHK 1300. Purchase of MAB 1300 drill includes ZHK 1300 case. See page 23 for MAB 825/845 case.

Rolling Transport Case for MAB 1300

• Positive, accurate driving of larger-sized taps• No slippage or tap damage• Tap shank square engages with square drive socket• 3 set screws secure tap in holder

Heavy-duty Tap Holder

Bushing – Reduces1-1/4" Weldon shank to3/4" Weldon shankOrder No. ZAP 200

Reducing SleeveDIN 2185Order No. ZRH 430 for MT 4:3(adapts MT4 to MT3)

Tap Collets and Reducing Adapters

Heavy-duty Tap Holder

Rolling Transport Case for MAB 1300

See page 43for additionaltapping options.

360ø 11/2"


3"

Stroke(length)

Heavy-duty compact drill with automatic feed

PORT

ABL

E M

AG

NET

IC D

RILL

S





• Compact, lightweight andportable: 16-1/8" high, 37-1/2 lbs.

• Power feed automaticallycontrols drill pressure tomaintain optimal RPM and feedrate


• Ideal hole cutting machine forsteel fabricators, contractorsand plant maintenanceprofessionals



• Automatic feed mechanismwith automatic stop and manual retraction




Integrated Safety




AutoMAB 1500


27

Standard Equipmentalso includes autolubrication, safetystrap, carabin hook,gloves, safety glasses,ear protection andallen keys.

† Steel case intended mainly for shipping purposes; damage may occur in transit.

Standard Equipment


1 Steel carrying case†

1 Safety chain

1 Operating manual


Model AutoMAB 1500 Specifications


Weight 371/2 lbs.


Speed 360 RPM

Magnet Base Size 31/2" W x 71/8"

Dimensions 161/8" H x 11" L x 713/16" W


Arbor Bore 3/4"




PORT

ABL

E M

AG

NET

IC D

RILL

SCSU 32AC & CSU 32RLBest power-to-weight performance in the industryCutter capacity

1 1/4" dia.


Standard Equipment includes autolubrication, auto chuck cutter holder,1/2" geared chuck, safety chain,carabin hook, allen keys, pilot pins andcarrying case. (CSU 32AC shown)


• Strong 8.2 Amp motor

• Compact, lightweight andportable – 14-1/4" high, 24 lbs.


• Model CSU 32RL variable speed


• Uses annular cutters; 5-3/4" stroke

• Twist drilling up to 1/2" dia.;7-1/2" stroke with chuck

• Tapping up to 3/4" dia.*

• Automatic lubrication system

Integrated Safety

• SafeMag™ Green/Red LEDmagnetic force indicator for safeoperation

• Equipped with CoolMag™ overheatprotection


28

CSU 32AC Specifications


Weight 24 lbs.



Tapping Capacity 3/4" (CSU 32RL only)

Speed 450 RPM

Magnet Base Size 65/16" W x 31/4" H



Arbor Bore 3/4"

Spindle 1/2"-20 UNF Thread


Reversible Motor Order CSU 32RL

Power Assist Order Accessory ZPA 401

* Model CSU 32RL for tapping up to 3/4" dia.

With a 1/2" chuck (PartNo. IBC 17), these

models easily convert tostandard drill presseswith a 61/2" stroke for


Tap collet set includedwith Model CSU 32RL

Model CSU 32RLhas a variable-speed

(100-450 RPM),reversible motor fortapping up to 3/4"

Lightweight, two-speed, high-performance drills

PORT

ABL

E M

AG

NET

IC D

RILL

S



CSU 50AC & CSU 50RL


29

With a 3/4" chuck (Part No.IBC 22) or MT2, these

models easily convert tostandard drill presses with

a 5" stroke forconventional twist drills.

Standard Equipment includes auto lubrication, autochuck cutter holder, 1/2" geared chuck, safety chain,carabin hook, allen keys, pilot pins and carrying case.(CSU 50RL shown)


• Easy "twist and lock" keyless arbor



Weight 29 lbs.



Tapping Capacity 15/16" (CSU 50RL only)

Speeds 1: 250 RPM, 2: 450 RPM

Magnet Base Size 61/2" W x 31/2" H

Dimensions 161/2" H x 9" L x 63/8" W


Arbor Bore 3/4"

Spindle MT2


Reversible Motor Order CSU 50RL


* Model CSU 50RL for tapping up to 15/16" dia.


• Strong 10.5 Amp motor

• Compact, lightweight andportable – 16-1/2" high, 29 lbs.

• 2-gear variable speed gearbox


Integrated Safety



• Emergency-off functionDrill up to 2" dia.

• Uses annular cutters; 10" stroke

• Twist drilling up to 7/8" dia.

• Tapping up to 15/16" dia.*


Tap collet set includedwith Model CSU 50RL

Model CSU 50RLhas a variable-speed,reversible motor fortapping up to 15/16"

Optional quick-change tappingchuck with MT2 connection(Model GSW.222) has flexiblecollet to fit taps 5/16" to 5/8"


PORT

ABL

E M

AG

NET

IC D

RILL

SCSU 80ACPowerful high-torque motor with multiple speedsCutter capacity

3 3/16" dia.


Standard Equipment includes autolubrication, auto chuck cutter holder,safety chain, carabin hook, allen keys,pilot pins and carrying case†.

† Steel case intended mainly for shippingpurposes; damage may occur in transit.



• 19-1/2" high, 57 lbs.





• Twist drilling up to 1-1/4" (withoptional chuck IBC 21); 6-1/2"stroke



Integrated Safety






30


Motor Power 15 Amp / 110 Volt*

Weight 57 lbs.



Speeds 1: 100 RPM, 2: 175 RPM

3: 245 RPM, 4: 385 RPM

Magnet Base Size 9" W x 43/8" H



Arbor Bore 3/4" (11/4" also available)

Spindle MT3




With a 3/4" chuck (Part No. IBC 21)or MT3, this model easily converts

to a standard drill press with astroke of 61/2".

Powerful reversible motor for drilling and tapping

PORT

ABL

E M

AG

NET

IC D

RILL

S



CSU 100/3RL


31


Standard Equipment includes autolubrication, auto chuck cutter holder,safety chain, carabin hook, allen keys,pilot pins and carrying case†.

† Steel case intended mainly for shippingpurposes; damage may occur in transit.



• Optional 1-1/4" arbor

CSU 100/3RL Specifications

Motor Power 16 Amp / 110 Volt*

Weight 57 lbs.




Speeds (variable) 40-140 RPM, 120-480 RPM

Magnet Base Size 9" W x 4" H



Arbor Bore 3/4" (11/4" also available)

Spindle MT3






• 19-1/2" high, 57 lbs.

• 2-gear variable speed gearbox


Integrated Safety




Drill up to 4" dia.


• Twist drilling up to 1-1/4" dia.; 6-1/2" stroke with geared chuck

• Tapping up to 1-1/8" dia.



Speed

CountersinkingReaming

TappingTwist Drilling

Optional quick-changetapping chuck with MT2

connection (Model GSW.222)has flexible collet to fit taps

5/16" to 5/8"

PORT

ABL

E M

AG

NET

IC D

RILL

SAIRBOR™ AB-4300



Model AB-4300-2

Safe • Reliable

• Inherently safer than electromagnetic drills inhazardous atmospheres and wet environmentswhere electricity requires "hot work permits"

• ATEX approved

• Industry’s first completely air-operatedmagnetic drill – NO ELECTRICITY!

• Fail-safe permanent magnet isactivated "on" and "off" by airpressure; in the event of a loss ofair flow, the magnet will notdisengage

• 1600 lbs. magnet holdingstrength

32


Model AB-4300-2 / AB-4300-2R Specifications

Motor Power (Pneumatic) 1.6 HP

Air Consumption @ 90 PSI 64 CFM (1/2" NPT Air Connection)


No Load Speed 400 RPM




Arbor Bore 3/4"


Stroke Length 47/8" Order Model AB-4300-2

Stroke Length 101/4" Order Model AB-4300-2R

With a geared chuckadapter (Part No. IBC 18) andextra rack (Model No. AB-4300-2R), AIRBOR™ easilyconverts to a standard drillpress with a 7 1/2" stroke.

Motor and magnetare powered completely

by compressed air

Model Comparison

AB-4300-2R shown with extra rack up (left)and extra rack down (right).

closed

13 1/2"open

22"closed

13 1/2"open

17 1/2"

w/cutters

4 7/8"w/chuck

1 3/4"Height

Weightlbs.

43kg

20lbs.

38kg

18

Drill Strokew/cutters

10 1/4"w/chuck

7 1/2"

AB-4300-2R AB-4300-2



• Twist drilling up to 5/8"

• Powerful 1.6 HP drill motor

• Long drill stroke – up to 101/4"

• Pressurized coolant system lubricatescutter and reduces risk of sparking

400ø 21/16"


Up to 101/4"

Stroke(length)

1/2"


Pressurizedlubrication system (Part No.9 4002 0020)

Pneumatic power for hazardous environmentsATEX ApprovedATEX Approved

Hydraulic for marine and construction – works underwater

PORT

ABL

E M

AG

NET

IC D

RILL

S



HB 4400 for Subsea Drilling


33

With a 3/4"chuck (Part No.602045A), thismodel easilyconverts to astandard drillpress with a 3"stroke.

Safe • Reliable

• Ideal for industrial, construction, marineand mining applications

• Drill structural steel and other metals

• Hydraulic motor safe for underwater use

• Manually operated permanent magnetwith ratchet control has holding strengthof 1300 lbs.



• Twist drilling up to 1/2" dia.

• Automatic lubrication

Model HB 4400 Specifications

Motor Power (Hydraulic) 1.5 HP

Weight 481/2 lbs.



No Load Speed, Variable 0-630 RPM

Hydraulic Supply Flow 6.5 GPM @ 2000 PSI

Magnet Base Size 71/4" W x 3" L




0-630ø 21/16"


Up to 33/4"

Stroke(length)

1/2"


Model HB 4400Hoses not included

AN

NU

LAR

CU

TTER

SAnnular CuttersAchieve burr-free finished holes, without predrilling or stepdrilling


Precision-ground flutes provide efficient chip clearance,increasing drilling productivity and decreasing cutter breakage

Hardened, high-speed tool steel Weldon Shank

Perfect drilling to close tolerances without runout.The result: a burr-free finished hole.

Benefits of CS Unitec's Cutter Design:

Double-action tooth geometry cuts, splitsand ejects chips more efficiently,

• increasing cutting speed• reducing tooth load • minimizing tool wear• lengthening cutter life

Engineered with a tapered innerwall for smooth, easy slug ejection.

Center hole forpilot pin accuratelyaligns the cutter, allows for internallubrication and removes the slug.


Pilot Pins: How they work…

The pilot pin accuratelycenters cutter over areato be drilled.

During drilling, the pilotpin retracts and allowsinternal coolant to reachthe cutting teeth.

When hole is complete,the slug is automaticallyejected from the cutter.

1: Centering 2: Oiling 2: Ejecting

6-Series HSS Unibroach™ Annular Cutters – Pages 36-37 Fully ground HSS annular cuttersCutting depth: 1" 2" 3" 4"

Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8" 3/4" - 5-1/8"

8-Series ARMOR-PLATED Unibroach™ Annular Cutters – Pages 38-39

Fully ground HSS annular cutters with TiAlN hard coatingCutting depth: 1" 2" 3"

Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8"

9-Series Unibroach™ TCT Hornet Annular Cutters – Pages 40-41

Sintered carbide annular cutters with Tungsten Carbide tipsCutting depth: 1"* 2-3/8" 3-3/8"

Drilling ø: 1/2" - 2" 1/2" - 5-1/8" 3/4" - 5-1/8"

For Cobalt Cutters and special sizes, see page 40.

* 1-3/8" depth for diameters larger than 1-1/2"A

NN

ULA

R C

UTT

ERS

35

� See pages 42-50 for Drill Accessories.

AN

NU

LAR

CU

TTER

SUnibroach® Annular CuttersHigh-speed steel for drilling 3x faster than twist drills


• CNC precision ground for fast penetration, accuracy andlong life

• Flutes run the length of the cutter for efficient chipclearance, increased drilling productivity anddecreased cutter breakage

• Drill holes 3 times faster than twist drills

• Produce reamed-quality, burr-free holes and solid slugs

• Reduce machine size and weight

• Cutting edges are resharpenable

• Eliminate time-consuming, costly pilot holes and step drilling

Annular Cutters are the standard hole-making drills in theindustry. Ideal for heavy-duty use on-site or in the shop, ourHSS Unibroach™ cutters are available in the following sizes:

1" drill depth – ø 7/16" to ø 51/8"2" drill depth – ø 7/16" to ø 51/8"3" drill depth – ø 3/4" to ø 51/8"Special sizes available

• Metric cutters available on request

Unibroach® Stack Cutters are available in diameters from 7/16" to 1 1/8" in 1", 2" and 3" depths. Drill multiple layersof steel without stopping to remove the center slug. Please contact us or consult our price list for more information.

* HSS Cutters must be used with lubricant.See page 42 for CS Unitec lubricants and cutting oil.

See page 46 for HSS Annular Cutter Starter Kit.

6-Series HSS

AN

NU

LAR

CU

TTER

S



37

Cutter KitsEach HSS steel cutter kit comes with thefollowing: 9/16",11/16", 13/16", 15/16", 1-1/16", pilot pin & carrying case.

Order No. Description

6-1-0016-1-002

1" depth Cutter Kit2" depth Cutter Kit

Pilot Pins for 6-SeriesOrder No. Description

For 3/4" Shanks7-3-102

7-3-202

7-3-302

1/2" - 3" dia., 1" depth

1/2" - 3" dia., 2" depth

3/4" - 3" dia., 3" depth

For 1-1/4" Shanks7-3-1002

7-3-2002

7-3-3002

3-1/16" - 5" dia., 1" depth

3-1/16" - 5" dia., 2" depth

3-1/16" - 5" dia., 3" depth

† We also stock 4" depth HSS cutters and MetricHSS cutters. Larger diameters and special sizesavailable upon request. Please call us for pricingand delivery.

Shank size:

3/4" for cutters up to 3" dia.

1-1/4" for cutters 3-1/16" to 4" dia.

6-1-1146-1-1166-1-1186-1-1206-1-1226-1-1246-1-1266-1-1286-1-1306-1-1326-1-1346-1-1366-1-1386-1-1406-1-1426-1-1446-1-1466-1-1486-1-1506-1-1526-1-1546-1-1566-1-1586-1-1606-1-1626-1-1646-1-166

6-1-1686-1-1706-1-1726-1-1746-1-1766-1-1786-1-1806-1-1826-1-1846-1-1866-1-1886-1-1906-1-1926-1-1946-1-196

6-1-1986-1-11006-1-11026-1-11046-1-11066-1-11086-1-11106-1-11126-1-11146-1-11166-1-11186-1-11206-1-11226-1-11246-1-11266-1-1128

7/16" 1/2" 9/16"5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16"1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2" 2-1/16"

2-1/8" 2-3/16" 2-1/4" 2-5/16" 2-3/8" 2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"

3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"

Order No. Diameter

Option for Cutters 3" and 4" Depth

7-3-402 2-piece pin for 3" and 4" depthcutters with 8mm pilot hole.

1" Depth*

N/AN/AN/AN/AN/A6-1-3246-1-3266-1-3286-1-3306-1-3326-1-3346-1-3366-1-3386-1-3406-1-3426-1-3446-1-3466-1-3486-1-3506-1-3526-1-3546-1-3566-1-3586-1-3606-1-3626-1-3646-1-366

6-1-3686-1-3706-1-3726-1-3746-1-3766-1-3786-1-3806-1-3826-1-3846-1-3866-1-3886-1-3906-1-3926-1-3946-1-396

6-1-3986-1-31006-1-31026-1-31046-1-31066-1-31086-1-31106-1-31126-1-31146-1-31166-1-31186-1-31206-1-31226-1-31246-1-31266-1-3128

3/4" 13/16" 7/8"15/16" 1"1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16"1-5/8" 1-11/16"1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"2-1/16"

2-1/8" 2-3/16" 2-1/4" 2-5/16" 2-3/8" 2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"

3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"

Order No. Diameter3" Depth**

6-1-2146-1-2166-1-2186-1-2206-1-2226-1-2246-1-2266-1-2286-1-2306-1-2326-1-2346-1-2366-1-2386-1-2406-1-2426-1-2446-1-2466-1-2486-1-2506-1-2526-1-2546-1-2566-1-2586-1-2606-1-2626-1-2646-1-266

6-1-2686-1-2706-1-2726-1-2746-1-2766-1-2786-1-2806-1-2826-1-2846-1-2866-1-2886-1-2906-1-2926-1-2946-1-296

6-1-2986-1-21006-1-21026-1-21046-1-21066-1-21086-1-21106-1-21126-1-21146-1-21166-1-21186-1-21206-1-21226-1-21246-1-21266-1-2128

7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8"15/16" 1"1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16"1-3/4" 1-13/16" 1-7/8"1-15/16" 2" 2-1/16"

2-1/8" 2-3/16" 2-1/4" 2-5/16" 2-3/8" 2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"

3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"

Order No. Diameter2" Depth*

* Cutters in shaded area above include a Pilot Pin.

** Cutters with 3" depth have an 8mm dia. pilot hole.

AN

NU

LAR

CU

TTER

SUnibroach® Annular CuttersTiAlN coating for up to 4x tool life, less friction and more power


• 3 to 4 times longer tool life with TiAlN coating

• Drill with less friction and more power

• Withstands higher working temperatures –up to 1480˚F (800˚C)

• Dry drilling or lubricating with water simplifiesworking conditions and cleanup*

• Prevents cold weld – metal chips do not adhere to the cutter

• Ideal for structural steel and hard metal

• 3/4" dia. shank (11/4" dia. shank available)* After the TiAlN coating is worn, lubricate with cutting oil

ARMOR-PLATED Unibroach™ cutters are available inthe following sizes:

1" drill depth – ø 7/16" to ø 51/8"2" drill depth – ø 7/16" to ø 51/8"3" drill depth – ø 3/4" to ø 51/8"

• Metric and larger diameter cutters available on request

ARMOR-PLATED Unibroach™ Cutters, at 90Rc hardness, are the state-of-the-art in hole cutting technology. They multiply service life, reduce cost andincrease productivity.

Less Friction = Less Heat = More Holes!

See page 46 for ARMOR-PLATED Unibroach™TiAlN Annular Cutter Starter Kit.

8-Series ARMOR-PLATED TiAlN

AN

NU

LAR

CU

TTER

S



39

ARMOR-PLATED Unibroach™ TiAlN Cutters:

• Drill with less friction and more power• Withstand higher working temperatures – up to 1480˚F (800˚C) • Dry drill or lubricate with water to simplify working conditions and cleanup**• Prevent cold weld – metal chips do not adhere to the cutter• Are ideal for structural steel and hard metal

** After the TiAlN coating is worn, lubricate with cutting oil

8-1-114 T8-1-116 T8-1-118 T8-1-120 T8-1-122 T8-1-124 T8-1-126 T8-1-128 T8-1-130 T8-1-132 T8-1-134 T8-1-136 T8-1-138 T8-1-140 T8-1-142 T8-1-144 T8-1-146 T8-1-148 T8-1-150 T8-1-152 T8-1-154 T8-1-156 T8-1-158 T8-1-160 T8-1-162 T8-1-164 T8-1-166 T

7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2" 2-1/16"

Order No. Diameter1" Depth

N/AN/AN/AN/AN/A8-1-324 T8-1-326 T8-1-328 T8-1-330 T8-1-332 T8-1-334 T8-1-336 T8-1-338 T8-1-340 T8-1-342 T8-1-344 T8-1-346 T8-1-348 T8-1-350 T8-1-352 T8-1-354 T8-1-356 T8-1-358 T8-1-360 T8-1-362 T8-1-364 T8-1-366 T

3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2" 2-1/16"

Order No. Diameter3" Depth*

8-1-214 T8-1-216 T8-1-218 T8-1-220 T8-1-222 T8-1-224 T8-1-226 T8-1-228 T8-1-230 T8-1-232 T8-1-234 T8-1-236 T8-1-238 T8-1-240 T8-1-242 T8-1-244 T8-1-246 T8-1-248 T8-1-250 T8-1-252 T8-1-254 T8-1-256 T8-1-258 T8-1-260 T8-1-262 T8-1-264 T8-1-266 T

7/16" 1/2" 9/16" 5/8" 11/16"3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16"1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16"1-7/8" 1-15/16" 2" 2-1/16"

Order No. Diameter2" Depth

* Cutters with 3" depth have an 8mm dia. pilot hole.

ARMOR-PLATED Cutter KitsEach armor-plated cutter kit comes withthe following: 9/16",11/16", 13/16", 15/16", 1-1/16", pilot pin & carrying case.


8-1-001 T8-1-002 T

1" depth Cutter Kit2" depth Cutter Kit


For 3/4" Shanks7-3-102

7-3-202

7-3-302

1/2" - 3" dia., 1" depth

1/2" - 3" dia., 2" depth

3/4" - 3" dia., 3" depth

Option for Cutters 3" and 4" Depth

7-3-402 2-piece pin for 3" and 4" depthcutters with 8mm pilot hole.

3"+ Diameter CuttersMetric and larger diameter cuttersavailable on request.

Shank size: 3/4" up to 3" dia.

ARMOR-PLATEDUnibroach™ Cutters, at90Rc hardness, are thestate-of-the-art in holecutting technology.They multiply servicelife, reduce cost andincrease productivity.

ARMOR-PLATED = Less Friction = Less Heat = More Holes!Increase tool life and achieve faster feed rates

Unibroach® Annular CuttersTungsten carbide-tipped for high-speed cutting


• Use high-speed RPM for best resultsand faster holemaking

• Ideal for drilling steel with rust or paint• Will outlast High-speed Steel cutters• Leaves a burr-free finished hole• Available in all sizes (fractional and

metric) • 3/4" or 11/4" shank

TCT Hornet cutters are availablein the following sizes:

1" drill depth – ø 1/2" to ø 11/2"1-3/8" drill depth – ø 19/16" to ø 2"2-3/8" drill depth – ø 1/2" to ø 51/8"3-3/8" drill depth – ø 3/4" to ø 51/8"• Metric cutters available on request

Closeup of tungsten-carbide teeth.

See following page forpart numbers.

Drill perfect holes up to 51/8" diameter without runout

• Standard with 3/4" or 11/4" shank diameters

• More cutting teeth to distribute the load evenly

• Increase tool life and achieve faster feed rates

• Use on milling machines, drill presses, CNC and otherequipment

• A solid slug has a higher value for scrap metal

• Available in TCT Carbide, HSS, Cobalt and ARMOR-PLATED Unibroach™

Unibroach® Large-diameterHole Cutting

Unibroach® Cobalt Cutters

• 3/4" shank is standard for cutters up to 3" dia. • Metric cutters available on request • See our price list for part numbers

• Unibroach®

Cobalt Cutters are made with 5% cobalt toincrease resistance to wear

• Excellent results when drilling high-tensile steel anddifficult-to-machine materials

• Available with TiAlN coating upon request

• Available for hole sizes up to 5" dia.

AN

NU

LAR

CU

TTER

S

40

9-Series - TCT Carbide Hornet



Cutter KitsEach hornet carbide cutter kit comes withthe following: 9/16",11/16", 13/16", 15/16",1-1/16", pilot pin & carrying case.


9-1-001 C9-1-002 C

1-3/8" depth Cutter Kit2-3/8" depth Cutter Kit

**We also stock Metric Carbide cutters.Please call us for pricing and delivery.Larger diameters and special sizes areavailable upon request.

Shank size:3/4" for cutters up to 3" dia.

1-1/4" for cutters 3-1/16 to 5-1/8" dia.

9-1-116 C9-1-118 C9-1-120 C9-1-122 C9-1-124 C9-1-126 C9-1-128 C9-1-130 C9-1-132 C

1/2"9/16"5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1"

Order No. Diameter

1" Depth

9-1-324 C9-1-326 C9-1-328 C9-1-330 C9-1-332 C9-1-334 C9-1-336 C9-1-338 C9-1-340 C9-1-342 C9-1-344 C9-1-346 C9-1-348 C9-1-350 C9-1-352 C9-1-354 C9-1-356 C9-1-358 C9-1-360 C9-1-362 C9-1-364 C9-1-366 C9-1-368 C

3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"2-1/16"2-1/8"

Order No. Diameter

9-1-216 C9-1-218 C9-1-220 C9-1-222 C9-1-224 C9-1-226 C9-1-228 C9-1-230 C9-1-232 C9-1-234 C9-1-236 C9-1-238 C9-1-240 C9-1-242 C9-1-244 C9-1-246 C9-1-248 C9-1-250 C9-1-252 C9-1-254 C9-1-256 C9-1-258 C9-1-260 C9-1-262 C9-1-264 C

1/2"9/16"5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"

Order No. Diameter

2-3/8" Depth

9-1-266 C9-1-268 C9-1-270 C9-1-272 C9-1-274 C9-1-276 C9-1-278 C9-1-280 C9-1-282 C9-1-284 C9-1-286 C9-1-288 C9-1-290 C9-1-292 C9-1-294 C9-1-296 C9-1-298 C9-1-2100 C9-1-2102 C9-1-2104 C9-1-2106 C9-1-2108 C9-1-2110 C9-1-2112 C

2-1/16"2-1/8"2-3/16"2-1/4"2-5/16"2-3/8"2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"

Order No. Diameter

9-1-2114 C9-1-2116 C9-1-2118 C9-1-2120 C9-1-2122 C9-1-2124 C9-1-2126 C9-1-2128 C9-1-2130 C9-1-2132 C9-1-2134 C9-1-2136 C9-1-2138 C9-1-2140 C9-1-2142 C9-1-2144 C9-1-2146 C9-1-2148 C9-1-2150 C9-1-2152 C9-1-2154 C9-1-2156 C9-1-2158 C9-1-2160 C9-1-2162 C

3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"4-1/16"4-1/8"4-3/16"4-1/4"4-5/16"4-3/8"4-7/16"4-1/2"4-9/16"4-5/8"4-11/16"4-3/4"4-13/16"4-7/8"4-15/16"5"5-1/8"

Order No. Diameter

9-1-370 C9-1-372 C9-1-374 C9-1-376 C9-1-378 C9-1-380 C9-1-382 C9-1-384 C9-1-386 C9-1-388 C9-1-390 C9-1-392 C9-1-394 C9-1-396 C9-1-398 C9-1-3100 C9-1-3102 C9-1-3104 C9-1-3106 C9-1-3108 C9-1-3010 C9-1-3112 C9-1-3114 C9-1-3116 C

2-3/16"2-1/4"2-5/16"2-3/8"2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8'3-7/16"3-1/2"3-9/16"3-5/8"

Order No. Diameter

3-3/8" Depth

9-1-3118 C9-1-3120 C9-1-3122 C9-1-3124 C9-1-3126 C9-1-3128 C9-1-3130 C9-1-3132 C9-1-3134 C9-1-3136 C9-1-3138 C9-1-3140 C9-1-3142 C9-1-3144 C9-1-3146 C9-1-3148 C9-1-3150 C9-1-3152 C9-1-3154 C9-1-3156 C9-1-3158 C9-1-3160 C9-1-3162 C

3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"4-1/16"4-1/8"4-3/16"4-1/4"4-5/16"4-3/8"4-7/16"4-1/2"4-9/16"4-5/8"4-11/16"4-3/4"4-13/16"4-7/8"4-15/16"5"5-1/8"

Order No. Diameter

9-1-134 C9-1-136 C9-1-138 C9-1-140 C9-1-142 C9-1-144 C9-1-146 C9-1-148 C

9-1-150 C9-1-152 C9-1-154 C9-1-156 C9-1-158 C9-1-160 C9-1-162 C9-1-164 C

1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"

1-3/8" DepthOrder No. Diameter

1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2"

Order No. Diameter


For 3/4" Shanks9-3-102 C

9-3-202 C

9-3-302 C

5/8" - 2" dia., 1-3/8" depth

11/16" - 2-5/16" dia., 2" depth

13/16" - 2" dia., 3" depth

For 1-1/4" Shanks9-3-202A C

9-3-302A C

2-3/8" - 5-1/8" dia., 2" depth

2-3/8" - 5-1/8" dia.,3" depth

Option for Cutters 3" Depth

7-3-402 2-piece pin for 3" depth cutterswith 8mm pilot hole.

AN

NU

LAR

CU

TTER

S

41

LUBR

ICA

NTS

AN

D P

ILO

T PI

NS

LubricantsCoolant extends the life of cutting tools


Cutting Oil• High-performance, biodegradable,

non-hazardous oils and pastes

• Oils for heavy removal of metal,including stainless steel

• Chlorine-free (MSDS on bottle/tub)

• Not necessary to dilute with water

Pressurized Coolant BottleUse with any automatic internal lubrication system.Part No. 9 4002 0020

Upgrade your drill's cooling system: see page 44 for arbors with automatic cooling.

• Milled channel efficiently supplies internallubrication to cutting teeth

• Available for cutter diameters ranging from7/16" to 51/8" and 1", 2", 3" and 4" depth of cut

• See price list for part numbers

Pilot Pins for Cutters

Cutting Oil:Part No. ZHS 006 (quart)Part No. ZHS 005 (gallon)

Your cutting tools will work cooler, longer and moreefficiently with ProLube™ Lubricants from CS Unitec.• Prolong tool life by reducing friction and wear

• Unique composition provides excellent adhesionto cutting tools for maximum lubrication

• Corrosion inhibitor• Non-toxic

ProLube™ Ideal for cutting steel, stainless steel and hard metals

ProLube PasteCS 7030-71212 oz. tub

ProLube LiquidWater soluble 16:1

CS 7010-504 - 1 gal. bottle

Accessories

DRI

LL C

HU

CKS

AN

D TA

PPIN

G T

OO

LS


• Two capacities: 1/2" and 3/4"

• Four chucks and adapters to fit all magnetic drills:

A) IBC 17 – 1/2" chuck for MAB 425 and CSU 32 series

B) IBC 18 – 1/2" chuck with 3/4" shank for AIRBOR™ and HB 4400 (fits all drills with 3/4" arbor bore)

C) IBC 21 – 3/4" chuck with MT3 shank for MAB 825, CSU 80AC and CSU 100/3RL

D) IBC 22 – 3/4" chuck with MT2 shank for MAB 455, MAB 525 and CSU 50 series

Drill Chucks for Straight Shank Twist Drills

A

B

CD

• Manufactured from high-quality HSS to ASAStandard (or DIN 376 for metric)

• Ideal for CS Unitec's portable drilling andtapping machines and other drills

Quick-change Tapping Tools, Collets and Chucks

Quick-change tapping chuck, Part No. GSW-222, with MT2connection, complete with flexible collet to tap 5/16" to 5/8". For use with CSU 50RL and MAB 485 magnetic drills.

Tap collets fit magnetic drills with 3/4" arbor bore.Available for taps 1/4" through 3/4".Hold standard USA taps conforming to ASA.

Part No. GSW-830C tapping chuck includes two variableclamp collets to tap 3/8" to 1 1/8". It is the least expensivesystem if you will tap more than 4 sizes. GSW-830C has anMT3 connection. For use with all MT3 drills.

Variable clamp collets for use in tap chuck No. GSW-830:Part No. GST-160 variable clamp collet for shanks 3/8" – 5/8".Part No. GST-230 variable clamp collet for shanks 5/8" – 7/8".

Part No. GSW-444 quick-change tapping chuck withMT4 connection (for MAB 1300). Collets not included.GSS-420 collet for 1/2" shanks GSS-433 collet for 1" shanks

GSS-422 collet for 5/8" shanks GSS-442 collet for 11/4" shanks

GSS-427 collet for 3/4" shanks

See page 26 for additional tapping accessories.

Tap up to1-5/8"

max. dia.

GSW-830C

AccessoriesArbors for Annular Cutters


• Use on any magnetic drill stand, drill press or shop equipmentwith a Morse Taper intake of No. 2, 3 or 4

• Available for Annular Cutter shank sizes of 3/4" or 11/4" Weldon

• Available for automatic internal cooling or manual cooling

• Keyless for fast, no-tools changeoverfor 3/4" dia. shank annular cutters

• Automatic internal cooling

• Turn, click… go!

ZSS 200 – Morse Taper No. 2for 3/4" dia. shankannular cutters

ZSS 300 – Morse Taper No. 3for 3/4" dia. shankannular cutters

turn,click…

GO!GO!

Quick-lock Arbor with Automatic Internal Cooling

Keyless,quick-change

system for annular cutters saves time

and money.

Just twist and lock!

ZIA 219M – Morse Taper No. 23/4" arbor bore


ZIA 30/75 – Morse Taper No. 33/4" arbor bore, 3" depth


ZIA 219KN – Morse Taper No. 23/4" arbor bore

ZIA 319KN – Morse Taper No. 33/4" arbor bore

ZIA 30/32 – Morse Taper No. 311/4" arbor bore

Manual Cooling Automatic Cooling

The Power Assist is a standard capstan, designed with delayed torquetransfer. This decreases the load on both cutter and drilling machine,allowing the machine to maintain max. RPM under full load.

• Reduces drilling time • Prevents cutter breakage• Extends lifespan of cutter/drill bit and machine

Power Assist

ZPA 401 – Power Assist for CSU 32 and CSU 50 series

ZPA 402 – Power Assist for CSU 80 and CSU 100/3 series

PowerAssistCapstan

ARB

ORS

AN

D P

OW

ER A

SSIS

T

44

Accessories


Extra-long holders extend stroke of drillsExtensions for Annular Cutters

• Extend cutter reach up to 18"

• Available for magnetic drills with 3/4" arbor bore or MT3

• Also available with 3 flats for straight shank drillchucks and R8 shanks for drill presses

• Drill difficult-to-reach areas

• Extend cutter reach over theside or through an existing hole*

* Hole diameter must be larger than 1 5/16"to accommodate width of extension

R8

3 Flats forGearedChucks x3/4" arbor

MT2 orMT3 x3/4" arbor

7-9-902 – 2" extension7-9-903 – 3" extension7-9-906 – 6" extension7-9-912 – 12" extension7-9-918 – 18" extension

We also offer extensions with the following connections:

3/4" WeldonShank

(2 Flats)

We also offer extensions with the following connections:

2-in-1 Drill/TapsDrill and tap with one tool

82˚ and 90˚ Countersinks

ZSS 050 – for MAB 150, MAB 425, MAB 485 and MAB 525

Protects against flying chips when drillingDetachable Chip Guard

• Manufactured of HSS with 5% cobalt

• 3/4" Weldon shank

Countersink hole sizes:

CTS 30 from 5/8" to 2 " / 82˚

CTS 50 from 5/8" to 2 1/8" / 90˚

National Coarse Threads (UNC) – sizes available:

CS500 – 1/2" x 13 UNCCS625 – 5/8" x 11 UNCCS750 – 3/4" x 10 UNC

AN

NU

LAR

CU

TTER

EX

TEN

SIO

NS

45

CS875 – 7/8" x 9 UNCCS1000 – 1" x 8 UNCCSDT-UNCKIT – 1/2", 5/8", 3/4" & 1" drill/taps

STA

RTER

KIT

S A

ND

PO

WER

WO

RKER

MA

GN

ETAccessories


Rare earth magnet cleans metal parts and shavingsPower Worker – simple cleanup of steel chips

POW 100 • Easily clean up sharp-edged drill chips, screws and other metal parts

• Items are safely ejected off of Power Worker without hand contact

• Ideal for hard-to-reach spaces

Starter Kits

ZST 100P Kit Includes:

Set of 5 annular cutters (one each of the following):

9/16" dia. x 1" depth (8-1-118) 11/16" dia. x 1" depth (8-1-122)


1-1/16" dia. x 1" depth (8-1-134)

2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100)

1 quart high-performance cutting oil (ZHS 006)

See pages 38-39 for more information on Armor-Plated TiAlN annular cutters.

ZST 100S Kit Includes:

Set of 5 annular cutters (one each of the following):



1-1/16" dia. x 1" depth (6-1-134)

2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100)

1 quart high-performance cutting oil (ZHS 006)

See pages 36-37 for more information on HSS annular cutters.

HSS Steel Cutter Starter Kit

Armor-Plated TiAlN Cutter Starter Kit

CS Unitec starter kits offer the essentials you needto begin drilling. We have two options that provide acost-effective tool set for your application.

Other annular cutter kits are available –contact CS Unitecfor details.


Clamping DevicesMOBIL CLAMP

Powerful grip

Jaws with step andprism for clamping offlat and round material.

Fine adjustment

in longitudinalmovement by anadjusting screwaccurately set tothe machiningpoint.

A true advance in magnetic drilling technology: The new clamping system MOBIL CLAMP can be used toconvert a magnetic drilling machine into a bench drill.

Extends the functionality of your portable magnetic drill. Ideal forparts that previously could only be drilled in the workshop – theycan now be machined on site. MOBIL CLAMP makes it possibleto drill, countersink, ream or tap small parts, since these can bemounted into the quick clamping device.

With the mounting of a magnetic drilling machine onto thesurface of the vice and the subsequent activation of the magnet,you will have a versatile, stationary drilling machine in next to notime. The magnetic drilling machine becomes a multi-purposemachine: whether large or small applications, flat or high, with the twist drill or the reamer,everything is possible. A stable support, designed for the MOBIL CLAMP clampingdevice, ensures the correct workingheight and a comfortable and reliableoperation.

MOBIL CLAMP

Order No. Jaw Quick-action V-blockwidth clamping jaw clamping jaw

ZMC 180 4" 3.15" (80mm) •(100mm) clamping width

ZMC 300 Base stand for clamping device

ZMC 180

ZMC 300

CLA

MPI

NG

DEV

ICES

47

Clamping DevicesDrilling stand and vise for hand drillsIndustrial drilling pillars for commercial hand drills with 43mm chuck journal diameter.Optimum stability by cast base plate combined with a pillar top of the MAB series. Versatile usability by a drill vise with 4" (100mm) jaw width (special accessories).Screws for slots are available for additional security under higher loads (special accessories).Working stroke of 9" - 17" (230 - 425mm).

Drill not included.Dimensions shown in mm.

Drilling Pillar

Order No. ZBS 100

Vise

Order No. ZST 100jaw width: 4" (100mm) clamping range: 4" (100mm)

Accessories

Screws for T-SlotsOrder No. ZTN 100

Hexagon Nut with CollarOrder No. ZSM 100

CLA

MPI

NG

DEV

ICES


VAC

UU

M P

LATE

S


Vacuum PlatesFor applications where drill alone will not adhere to surface

Vacuum Plate for Channeled Plates

Order No. ZAV 301 (vacuum plate only)

Order No. ZAV 310 (vacuum plate andvacuum pump, 110V)

Ideal for channeled plates. High-performancevacuum pump with circular oil lubrication.Clamping plate diameter: 11.8"

Vacuum Plate for Smooth Surfaces

Order No. ZAV 401 (vacuum plate only)

Order No. ZAV 410 (vacuum plate andvacuum pump, 110V)

Ideal for smooth surfaces. High-performancevacuum pump with circular oil lubrication.Clamping plates with two suction surfaces andcut-through drilling area.

PIPE

SA

DD

LE C

LAM

PPipe Saddle Clamp SystemEnsures safe, secure drilling of pipes and tubular material


ZRO 250 Pipe Saddle Clamp System

Pipe diameters 31/4" - 10"Chain length: 351/2"For models: MAB 425, MAB 455, MAB 485,P1, MDM 40 and CSU 32

ZRO 500 Pipe Saddle Clamp System

Pipe diameters 6" - 20" (extension chain available)Chain length: 65"For models: MAB 525, MAB 825, MAB 845, CSU 50,CSU 80, CSU 100/3, AB-4300-2 and HB 4400

Dimensions shown in mm.Dimensions shown in mm.

Ideal for applications requiring the flexibility of clamping on pipesfrom 3-1/4" to 20" diameter, these pipe clamp systems are flexibleand easy-to-use. Swivelling V-blocks fit the contour of the pipe whilethe heavy-duty tension chains securely affix the clamps to the piecebeing drilled. The drilling position can be easily and safely adjusted.

Order No. ZRO 001 – extension chain for ZRO 500pipe saddle clamp.

Documents

Portable Magnetic Drilling Machines - CS Uniteccatalog.csunitec.com/Asset/CS Unitec MagDrills+Accessories.pdf · Designed for continuous operation, CS Unitec's portable magnetic drills