16
Portable Bluetooth Speaker SC-NA07 GN

Portable Bluetooth Speaker - Panasonic...• the AUDIO INsocket on this speaker and • the headphone socket on the external device. 1 2 Play audio on the external device (refer to

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

  • Portable Bluetooth Speaker

    SC-NA07

    GN

  • 1

    SC

    -NA

    07

    Do & Don't: E Waste Management Guidelines

    S.No. DoAll electrical and electronic products are required to be handed over only to an authorisa�on recyclerThis product should be handed over only to authorisa�onrecycler for disposal.Keep the product in isolated area, a�er it becomes non-func�onal/un-repairable so as to prevent its accidental breakage.Always dispose products that have reached end-of life at authorisa�on collec�on centers, a registered dismantlers, recycler or Panasonic service center.Wherever possible or as instructed, separate the packaging material according to responsible waste disposal op�ons and sor�ng for recycling.

    Don'tThe product should not be opened by the User himself/herself, but only by authorisa�on service personnel.The product is not meant for re-sale any authorisa�onagencies/scrap dealer.The product is not meant for mixing into household waste stream.Do not keep any replaced spare part(s) from the product in exposed area.

    Do not dispose your product in garbage bins along with municipal waste that ul�mately reaches landfill.

    1

    2

    3

    4

    5

    These symbols are only valid in the European Union and countries with recycle systems.If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

    Disposal of Old Equipment and Batteries

    Only for European Union and countries with recycle systems

  • 2

    SC

    -NA

    07 Table of Contents Important

    WarningSafety Precautions

    Product Information Technical Specifications

    Troubleshooting General About Bluetooth Device

    Overview Of The Speaker Introduction Standard Accessories Buttons And Interfaces

    Get Started Charge The Built-In Battery Switch On/Off Auto Off Function

    Use Bluetooth Devices Connect A Bluetooth Device Play From Bluetooth Device

    Other Features

    Listen To An External Device Adjust Volume Low Battery WarningSound Becomes Low While In Use

    3

    33

    1010

    111111

    4445

    6666

    778

    88889

  • SC

    -NA

    07

    33

    ImportantCAUTION!

    Safety precautionsSafety precautions

    Never remove the casing of this speaker. Never charge the unit with 9V/12V adaptor.

    Never lubricate any part of this speaker.

    •Never place this speaker on other electrical equipment.•

    • Keep this speaker away from direct sunlight, naked flames or heat.

    Do not let water or other liquids drip or splash inside the unit. Do not expose accessories (AC mains lead, and etc.) to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use only the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicingto qualified service personnel. Do not let metal objects fall inside this unit. Do not place any item on top of this unit.This unit is intended for use in moderate climate.

    • • •

    • • •

    Unit ≥ To reduce the risk of fire, electric shock or product damage

    To reduce the risk of fire, electric shock or product damage

    USB charging lead ≥ •

    Place this unit on an even surface. To reduce the risk of fire, electric shock or product damage, Ensure this unit is well ventilated. Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

    Placement ≥

    • •

    Ensure that the power supply voltage corresponds to the voltage printed on this unit. Insert the USB charging lead fully into the USB socket on the back of the unit. Insert the other end of the USB charging lead into a USB/AC Adaptor (not included)Do not pull, bend, or place heavy items on the lead. Do not handle the lead with wet hands. Do not use a damaged mains plug or socket outlet.

    • •

    This unit has a built-in battery.

    Unit ≥

    Do not place sources of naked flames, such as lighted candles, on this unit. Do not leave the unit in a car exposed to direct sunlight for a long period of time with doors and windows closed. This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

    Do not expose this unit to direct sunlight, hightemperatures, high humidity, and excessivevibration.

    Product Identification Marking is located on the bottomof the unit.

    Warning Warning Risk of fire, explosion and burns. Do not disassemble, heat above 100 C or incinerate.

  • SC

    -NA

    07

    4

    Overview of the Speaker Overview of the Speaker

    IntroductionIntroductionWith this speaker, you can• enjoy audio from your Bluetooth-enabled devices

    such as mobile phones, tablet PCs, laptops etc.

    • enjoy audio from your other external devices via AUX input such as MP3 player, personal computers etc.

    Standard accessoriesStandard accessoriesCheck and identify the contents of your package:

    • 1 x Speaker Unit• 1 x 3.5mm Stereo Cable • 1 x User Manual• 1 x USB Charging Cable

    The symbols on this product (including the accessories ) represent the following:

    DCOnStandby

  • SC

    -NA

    07

    5

    Buttons and Interfaces

    Press to play or pause the songDuring Bluetooth playback, press and hold for more than 2 seconds to exit Bluetooth playbackDuring AUX playback, press the button to mute

    Press to reduce the volumePress and hold for more than 2 seconds mode to play previous song

    5

    6

    INDICATOR

    Indicate input mode or low batteryFlash slowly in blue color when the unit is in Bluetooth pairing mode In solid blue color when the unit is connected successfully with Bluetooth deviceIn solid red color when the unit is in AUXmodeFlash in both red and blue when the unitis in low battery status

    Recharge the built-in battery DC IN 5V

    Indicate charging status

    LED indicator in red color: being chargedLED indicator in green color: fully charged

    CHARGE

    Connect an external audio device AUDIO IN

    Reset the unit to factory default RESET

    7 98 10

    6 4 25 3 1 11

    Press to increase the volumePress and hold for more than 2 seconds mode to play next song

    4

    3Press to switch to AUX input mode when audio in cable is inserted

    2Press to enter into Bluetooth pairing mode. During AUX playback, press to switch to Bluetooth pairing mode

    Press and hold to switch on or off

    1

  • SC

    -NA

    07

    6

    Get startedAlways follow the instructions in this chapter in sequence.

    Charge the built-in batteryThe speaker is powered by a built in rechargeable battery.

    Note • Before use, fully charge the built-in battery. • The micro USB socket is for charging only. •

    charge cycles. Battery life and number of Rechargeable battery has a limited number of

    • Charging the unit with 9V/12V adaptor may damage the product.

    charge cycles vary by use and settings.

    Connect the USB cable between

    • the USB charging socket on the speaker, and

    • a USB socket on a computer or a 5V DC adaptor.

    The LED indicator on the backside of the speaker indicates the battery status.

    DC IN

    LED indicator on the backside of the speaker

    Battery status

    Solid red Under charging

    Fully chargedSolid green when the speakeris switched on

    Switch on/off• Press and hold to switch the speaker on.

    » The LED indicator on the top turns solid blue.

    »

    To switch off, press and hold again

    • » The LED indicator on the top turns off.

    In Bluetooth mode, if Bluetooth connection is invalid or music playback is stopped for 5 minutes, this speaker switches to off mode automatically.

    For first-time setup,the LED indicator on the top flashes blue,indicating that the speaker is in pairing mode.

    Auto off function•

    To switch on from off mode, turn on the unit again.

    »

  • SC

    -NA

    07

    7

    Use Bluetooth devicesWith this speaker, you can listen to audio from Bluetooth-enabled devices.

    Connect a Bluetooth deviceNote

    • Make sure that your Bluetooth device is compatible with this speaker.

    • Any obstacle between this speaker and a Bluetoothdevice can reduce the operational range.

    • Keep away from any other electronic device

    The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet).

    Make sure that the speaker is in pairingmode, that is, the LED indicator on the top flashes blue.

    On your Bluetooth device, enable Bluetooth and search for Bluetooth devices (refer to the user manual of the device).

    When [Panasonic SC-NA07] is displayed on your device, select it to start pairing andconnection. If necessary, enter default password “ 0000 ”.

    After successful pairing and connection, the speaker beeps twice, and the LEDindicator on the top turns solid blue.

    that may cause interference. •

    1

    2

    3

    To disconnect the Bluetooth enabled device:

    Disable Bluetooth on your device ;Long press button to disconnect Bluetooth

    • •

    To reconnect the Bluetooth enabled device:For a paired Bluetooth device on which automatic reconnection is enabled,this product reconnects with it onceit is detected. For a paired Bluetooth device that does not support automatic reconnection, reconnect it with this product manually.

    To connect another Bluetooth-enabled device:Disable Bluetooth on the current device, and connect another device.

    Move the device beyond the communication range.

    LED indicator on the top

    Description

    Flashing blue Connecting or waiting for connection

    Solid blue Connected

    Note • Bluetooth speaker may deliver low audio output

    for some mobile phones and other compatibledevices when connected via Bluetooth.

  • SC

    -NA

    07

    8

    After successful Bluetooth connection, play audio on the Bluetooth device.

    Audio streams from your Bluetooth device to the speaker.

    With this speaker, you can also listen to an external audio device such as an MP3 player.

    The speaker switches to the AUDIO IN source automatically.

    Press +/- to increase or decrease the volume

    While the battery is running low, the unit beeps every 5 minute for warning

    While the battery is running low, the indicator on top of the unit flashes between red and blue.

    Play from Bluetooth device

    Note• If there is an incoming call on the connected

    mobile phone, music play pauses.

    Other featuresListen to an external device

    Connect an audio input cable with a 3.5 mm connector on both ends to• the AUDIO IN socket on this speaker,

    and• the headphone socket on

    the external device.

    1

    2 Play audio on the external device (refer to its user manual).

    Note • When you unplug the 3.5mm audio cable, the

    speaker switches to the Bluetooth source automatically.

    Adjust volume

    Low battery warning

  • SC

    -NA

    07

    9

    The sound may become low in the following cases. This is not a malfunction.

    When the built-in battery is running low andthe indicator on top flashes between red andblue, while the speaker is being powered by the built-in battery only.When the built-in battery is running low as a result of using the speaker at a loud volume for a long time even if the speaker is connected to an AC outlet via a USB AC adaptor(commercially available), or connected to a booted computer.

    Sound becomes low while in use

    Note

    • This speaker is designed to reduce the maximum volume to about half when the

    remaining built-in battery power becomes

    less than 20% in order to protect the circuit

    due to extreme voltage fluctuation by using

    at a loud volume. Even in this case, you can

    charge the built-in battery, but the volume

    does not return to the normal. To return the

    volume to the normal, charge the built-in

    battery until the remaining built-in battery

    power reaches 20% or more, turn off the

    speaker and turn it on again, and then

    adjust the volume.

    If the sound becomes low while in use, follow the procedure below.

    1. Turn off the speaker.2. Charge the built-in battery sufficiently.

  • SC

    -NA

    07

    10

    Product information

    Technical Specifications

    Rated Output Power 10W RMSFrequency Response 20 - 20000Hz

    Note • Product information is subject to change without

    prior notice.• After full charge, battery playtime is up to 8 hours

    when played at 40%-50% of the MAX. volume.

    Bluetooth version V5.0BluetoothFrequency Band

    2.402GHz ~ 2.48GHz

    Range 10 m (Free space)

    Speaker Impedance 4 ohmSpeaker Driver 50 mm in diameter

    Power Supply (through USB socket)

    DC 5V, 1A

    Built-in Battery + Lithium ionbattery (3.7V, 2000mAh)

    Battery life Up to 8 hours

    Operation temperature 0˚C~45˚CStorage temperature -10˚C~70˚CDimensions - Main Unit (L x B x H)

    17.8 x 5.6x

    6.2 cmWeight - Main Unit 405g

  • SC

    -NA

    07

    11

    To keep the warranty valid, never try to repair the system yourself.

    If you encounter problems when using thisdevice, check the following points before requesting service. If the problem remains unsolved, please contact Panasonic customer support.

    When you contact Panasonic customer care,please make sure that the device is nearby and the model numberand serial number are available.

    Troubleshooting

    CAUTION!

    Never remove the casing of this device.

    No powerRecharge your speaker.

    General

    No sound • Adjust volume on the speaker or the

    Bluetooth-connected device. • Make sure that your Bluetooth device is

    within the effective operational range.

    No response from the speaker • Restart the speaker.

    About Bluetooth deviceThe audio quality is poor after connectionwith a Bluetooth-enabled device.

    The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.

    The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function.

    This product is already connected with another Bluetooth-enabled device.Disconnect that device and then tryagain.The paired device connects and disconnects constantly.

    The paired device connects and disconnects constantly.

    The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.

    For some devices, Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this product.

  • SC

    -NA

    07

    12

    Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmisslon.

    About Bluetooth

    This system uses the 2.4GHz frequency band.

    Frequency band used

    This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary.The actions below are punishable by law in some countries: Taking apart or modifying the system. Removing specification indications

    Certification of this device

    Wireless transmission and/or usage with allBluetooth equipped devices is not guaranteed.All devices must conform standards set byBluetooth SIG, Inc.Depending on the specifications and settings of a device, it can fail to connect or some operationscan be different.This system supports Bluetooth security features.But depending on the operating environment and/or settings, this security is possibly not sufficient.Transmit data wirelessly to this system with caution.This system cannot transmit data to a Bluetooth device.

    Restrictions of use

    Use this device at a maximum range of 10 m. The range can decrease depending on the environment, obstacles or interference.

    Range Of use

    This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this system is located too close to other Bluetooth devices or the devices that use the 2.4GHz band.This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.

    Interference from other devices

    ••

    This system is for normal, general use only.Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc).

    Intended usage

    The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Othertrademarks and trade names are those oftheir respective owners.

    License

  • Panasonic Corporation https://www.panasonic.com