PMA Motor Factors Garage Equipment Spring Edition

Garage EquipmentIssue: 01 Spring Edition 2015

Fusion II Twin Pack Offer

For more information on this offer please see page 3

Delphi diagnostics, our number 1 selling dignostics solution.Exceptional diagnostics performance for Car, LCV or HGV.

For more information on this offer please see page 8

Diagnostics

Wheel AlignmentWheel Alignment

For more information on these products, please see page 5

DelphiDiagnostics.

From £5.70p/w

Wheel Alignmentfrom

From £10.33p/w

Hofmann Fusion IITwin Pack Offer.

From £22.26p/w

Lifting Solution

For more information on these products please see page 6

for Every Kind of Vehicle

BendPakLifting Solutions

From £14.47p/w

MOTORFACTORSPMA

Chichester 01243 772230 Cranleigh 01483 276099Dorking 01306 881115 Horsham 01403 266444 Pulborough 01798 875666

MOT

2

MOT

ATL - (Automated Test Lane)

Leasing options are available on all Garage Equipment

• Immediate Acquisition of Equipment. Acquire the equipment that is needed now, not when the cost meets capital budgeting requirements.

• Conserve Working Capital. The additional leasing facility will release valuable working capital for alternative projects within the business.

• Tax Advantages. 100% of all rentals paid can be offset against the corporate tax liability of the company.

• Planned Budgeting. Payments are fixed and structured to compliment the budgetary requirements of the company.

• Upgrading Equipment. Leasing affords the opportunity to upgrade or settle the agreement at any time throughout the period of the lease.

• Protect Existing Lines of Credit. Use leasing as an alternative to your existing funding facilities and protect established lines of credit.

There is a good reason why over 90% of The Times Top 100 companies use lease finance to invest in new equipment. In fact, there are several good reasons that make a compelling case for lease finance being an excellent alternative to cash purchase.One misconception that leasing suffers from is that it is not cost effective, in addition to the benefits leasing brings it competes very well in simple monetary terms.

By choosing to lease, Company A would gain £1,289.59 in tax relief when compared with a cash purchase.

Example:Company A is looking to invest in a new security system for its business. They have two options, either to purchase the equipment or to utilise a lease option.

Cash Purchase

Year Capital Allowance Tax Relief1 18% of £7,500 = £1,350 Less 20% = £270.002 18% of £6,150 = £1,107 Less 20% = £221.403 18% of £5043 = £907 Less 20% = £181.55

Total tax relief: £672.95

Assumptions:Equipment Price: £7,500Lease Period: 3 YearsFrequency: QuarterlyCompany’s Tax Rate: 20%

Lease Rental

Year Capital Allowance Tax Relief1 4 rentals of £817.73 Less 20% = £654.182 4 rentals of £817.73 Less 20% = £654.183 4 rentals of £817.73 Less 20% = £654.18

Total tax relief: £1962.54

Benefits of LeasingLeasing provides you with the flexibility to acquire the system you need to react and respond to your internal

and external commercial requirements.

Lease V Purchase

MOT Bay Installations

We can offer a wide range of high quality fully project

managed MOT Bay Installations.

Including Class IV & Class VII ATL, Motor Cycle, Dual Revenue

(with Wheel Alignment) & lots more.

All of which come with avariety of options, which include

4 Post Lifts, Scissor Lift andPit Package.

3

Tyre ChangersLifts

Features

• With base frame• Asymmetrical design, car door access on two sides• Automatic arm locks• Low pick-up height• Electro-mechanical drive• Rugged long-life column profile• Rolled-thread lifting spindles• 4 pick-up pads vertically adjustable from approximately 105 - 165mm, 120mm diameter• Automatic lubrication system

Two-post lift for vehicles up to 2.5t. The standard lift with base frame is designed for garages and tyre shops to lift

vehicles up to 2.5t.

Features

• Rugged design• Columns made from long-life column profile for utmost stability• Low wear Nylatron supporting nuts• Three part long supporting arms• Large adjustable swing range• Low pick up height• Pick up pads vertically adjustable

Features

• Slim lifting columns• Low wear Nylatron supporting nuts• Large swing arm range• Low pick up height• Free access to vehicle doors

The MSE 5000 is a standard lift without base frame, designed for cars, vans and light vehicles up to 5t.

This standard lift without base frame and with mechanical synchronisation control is designed for cars, vans and light

trucks of a gross vehicle weight of up to three tonnes.

Duolift GTE 2500 MSE 5000 5T 2 Post Symmetric-mechanical Lift

MFT 3000 3T Electro Mechanical Asymmetrical 2 Post Lift

Special Price £2999.00 + VAT Special Price £2895.00 + VAT Special Price £6695.00 + VATRRP £4699.00 RRP £4399.00 RRP £10450.00

Features

• VPM (virtual plane measuring) for enhanced measuring and higher accuracy results• Automatic start of measurement when hood is closed & brake applied at end of spin cycle• Robust 40mm shaft• 5 different options for weight positioning on wheel• 2D SAPE - Automatic entry of wheel diameter and wheel distance• Guided weight positioning in Alu mode - using gauge arm weight applicator• Split weight mode - Hide weights behind wheel spokes for more appealing cosmetic finish• Tyre matching mode - optimise tyre to rim so using less weights• Integrated flange

Features

• It also comes as standard with the pneumatic mounting tool, easymont PRO for mounting and demounting of UHP and run-flat tyres.• Double acting bead breaker cylinder and large bead breaker blade• Mounting head and jaws are provided with plastic protectors.• Mounting head vertically and laterally adjustable in spaced-apart position relative to rim• The tilt-back post and the four ergonomic pedals provide user-friendly operation• Outer clamping range up to 24”• Re-designed easymont PRO suited for handling run-flat tyre systems (additional optional adaptors required for PAX and CSR)• Accurate and quick operation due to the self-centring four-jaw turntable controlled by two clamping cylinders

Compact, easy-to-use wheel balancerwith small footprint and LED display.

The Monty FUSION II is ideal for handling wheelsand tyres of a wide variety of sizes and types.

Featuring sliding jaws and an extended clampingrange it’s able to change wheels up to 24”.

Geodyna 960-2 Fusion IIMonty 3300-24 Fusion II

RRP £4650.00 RRP £1950.00

Special Price £3095.OO + VAT Special Price £1499.00 + VAT

Special Offer£4299.00 +VAT

When you buy both Of these products

Tyre Changers

4

Tyre Changers

RRP £11995.00

Special Price £8250.00 + VAT

Monty 8600 Platinum Fully Automatic Tyre Changer

The Monty 8600 Platinum is a lever-less high-productivity tyre changer for passenger car and light van tyres. The dual-disc bead breaker, the centre clamp system and the automatic mounting tool make the Monty 8600 Platinum one of the most productive tyre changer solutions on the market. Fast, safe, accurate and certified by the German Tyre Industry Association (wdk) for use on standard tyres, UHP (Ultra High Performance) and run-flat tyres, it has a unique electronic sync dual-disc bead breaker ensuring gentle, faster, easier, more ergonomic and effortless bead breaking

without damaging tyre bead or sidewall.

Truck tyre changer for mounting and demounting tubelesstruck and bus tyres on steel or alloy rims.

Scope of application:For trucks & buses with rim sizes up to 1200mm

Features

• Wheel lift• Centre type quick fit wheel clamping flange• Tool box• Mounting tool with patented integrated demounting finger• Inflation gauge• Control panel• Mounting / demounting roller and bead breaker disc• Bead press arm• Mirror• Accessory tray• Control pedals• Laser pointer• Top-side bead seating kit• Sidewall press arm• ESDB® – Electronic synchronised dual-disc bead breaker for ergonomic operation

Monty 3650 - Truck


The Geodyna 3900 is a professional balancer for car, light truck and motorcycle wheels which combines high accuracy with a small

footprint. A perfect solution for garages that want to optimise the working space.

Geodyna 3900High performance video wheel balancer

Monty 3300 Racing PLUSPneumatic tyre changer

RRP £6399.00 RRP £3298.00

Special Price £4250.00 + VAT Special Price £2300.00 + VAT

Features

• Motorised wheel balancer and integrated flange• Compact design• 19” monitor• User friendly graphical display• Patented virtual plane measurement (VPM) technique• Semi automatic data entry• 2D SAPE• QuickBAL feature for reduced cycle times• Measuring speed <200rpm• Wheel guard

Features

• Double-acting bead breaker cylinder• Mounting head, vertically and laterally adjustable relative to rim (pneumatically controlled)• Self-centring four-jaw chuck• Mounting tool with plastic protection• Ergonomic and user-friendly• Quick-inflating valve• Outer clamping range up to 24”• Pneumatic tilt back post, pneumatically locked in working position• Re-designed easymont PRO suited for handling run-flat tyre systems (additional optional adaptors required for PAX and CSR)• Pedal controlled inflation• Tool box with integrated precision pressure gauge

Special Offer£6250.00 + VAT

When you buy both Of these products

The Monty 3300 racing, with the pneumatic mounting tool easymont PRO. User-friendly mounting and demounting of UHP

and run-flat tyres in line with OEM specifications.

RRP £6803.09

Features

• Access ramp for easy loading of the tyre changer.• Two rollers for bead breaking and tyre changing allows quick operation.• Inner and outer beads are demounted in a single process.• Innovative design ensures rollers are always centred relative to the wheel.• Wheels, rollers and control console positioned relative to each other to make retreading of tyres extremely convenient.• Easy control via integrated control console.• Clamping of wheel by its centre bore via cone and wing nut.

5

Wheel AlignmentWheel AlignmentDynaliner® DYN3000-24

Wall Mouted


RRP £11855.00


V3D Geolite

Free No obligations, on site demonstration

The V3D Geolite is a 3D car and LGV aligner featuring efficient camera technology with a moveable camera beam, to follow the ramp.This wheel aligner comes with a TFT flat-panel 19in screen and entry level software.The V3D Geolite provides accurate, real-time measurements that reduce set-up and measurement times while generating serious productivity benefits. Less time more profit!Simple to use and a great space-saving design, this aligner is ideal for small shops too.

Geoliner 790 WirelessWith AC400 Clamps


Features

• With moveable camera beam support (lift – flexible working height 0-2m)• Control terminal with shelves for printer and PC and additional storage space• 17in TFT flat monitor• PC with Windows operating system and standard user software• Set of four universal wheel clamps – clamping range 11in-22in• Colour printer• Built-in loudspeakers• Power supply 230V 50/60Hz• Simple operation and quick accurate measured results• Complete and up-to-date OEM specs• Cordless communication between targets and camera system• Standard accessories: brake pedal lock, steering wheel holder

Geoliner 580 Prism EliteComputerised Wheel Aligner


The HOFMANN wall mounted 4 wheel laser alignment system is a highly profitable and technically valuable tool that is a must for any garage in the business of vehicle

servicing or tyres.Individual front and rear toe, rear thrust line, set back and steering wheel position can all be achieved in just a matter

of minutes.

Highly accurate, repeatable measurements and wirless communication makes the Geoliner 790 a great

solution for premium or high volume garages.

Do alignments quickly from virtually anywhere in your shop. Reduce the time required to perform corrective actions and rely on advanced, lightweight components

that are designed with the technician in mind.

Features

• Computerised four-wheel aligner• Universal wheel clamp 11in – 22in• Steering wheel holder• Brake pedal depressor• Custom vehicle specifications• Aligner system diagnostics• Integrated help system• 3D animations• Tools, parts and adjustment instructions• Advanced customer database• Printable before and after results• Multiple units of measure• Equalise toe adjustment• Rolling run-out compensation

Features

• Automated caster sweep – Automatically detects when the steering wheel is turned and initates the caster sweep function• Rolling radius – Identify mismatched tyre sizes - a potential cause of vehicle pulling and drive train damage• Cross diagonal – Identify frame and structural issues before alignment adjustments are made• A-Arm adjust – Compound meter provides visual reference for simultaneous caster and camber adjustment for vehicles and adjustable control arms• EZ toe – Turn the front wheels and access difficult adjustment points while still displaying centred toe readings• Cradle adjust – Compound meter provides visual reference for simultaneous SAI and caster adjustment for vehicles with front sub-frames/cradles• Wireless comunication and high mobility

Features

• Wheel rims - 12 inches to 23 inches• Easy mount clamps• Alloy friendly clamp contact• Automatic head recharge• Continual operation up to 8 hours• Turn plates included• Steering wheel clamp included• Brake pedal depressor included• Drop kit for low spoiler vehicles• Optional electronic caster / camber / KPI gauge

RRP £10896.15 RRP £24995.00RRP £2881.00

Held in

King’s Lynn

Training Voucherfor one person

Free

Lifts

6

LiftsXPR-9 Dual-W

idth, 4 TonXPR-12FD-LW

B 5.4 TonXPR-10 4.5 Ton

HD-9 4 TonHDS-14X 6.3 Ton

• Short column for low ceiling installations• Dual width available *see Specs• 4x4 and van adapters supplied F.O.C.• Wide or narrow configuration• Single piece columns• Single point safety release• Drop end arms provide a lower pad height• Large 20” x 19” steel column base plates• Triple telescoping arms provide increased range for lifting point access.• Electric/hydraulic cylinders• Safety locks in each column spaced every 3 inches

• Electric/hydraulic power system• Dual width available *see Specs• Large 19” x 17” steel column base plates• Self-lubricating dura-glide polythene bearing system• Safety locks in each colum spaced every 3-inches• Automatic arm restraints• Heavy-duty dual 3/8” equalizer cables with oversize cable sheathes• Padded overhead safety-shut off bar• Truck and van adapters standard• 5 year structure warranty

• The only lift suitable for LWB vehicles.• Open-top eliminates overhead obstruction, ideal for new large vans• Triple-telescoping arms provide increased range for lifting point access• Truck and van adapters as standard• Self-lubricating dura-glide polythene bearing system• Safety locks in each column spaced every 3-inches

• Robust & reliable• Runways accommodate wide or narrow vehicles• Fully enclosed lifting cables, safety locks, and sheathes• Internal “Anti-Sway” Slider Blocks in each column• Pneumatic push-button safety release• Longer approach ramps for low ground clearance vehicles• Multi-position safety locks in each column• Power unit can be located at the front or rear of the lift.

• Mid- to long-style approach ramps for low ground clearance vehicles• Single hydraulic cylinder mounted underneath runway• Internal “Anti-Sway” Slider Blocks in each column• Internal anti-sway slider blocks in each column• Safety locks enclosed in columns minimize pinch points• Customizable power unit location• Independent backup slack-cable safety latches• Runways feature non-skid surface• Optional drive-thru ramps available

A - Height Overall: (*) 3683 mmB - Width Overall - Narrow Configuration 3353 mmB - Width Overall - Wide Configuration 3683 mm C - Width Outside of Columns: (Narrow Configuration) 3226 mmC - Width Outside of Columns: (Wide Configuration) 3556 mmD - Floor To Overhead Switch: (*) 3581 mmE - Inside Columns: (Narrow Configuration) 2791 mmE - Inside Columns: (Wide Configuration) 2921 mmF - Reach (Front Arm Min.): 648 mmG - Reach (Front Arm Max.): 1257 mmH - Reach (Rear Arm Min.): 825 mmI - Reach (Rear Arm Max.): 1333 mmH - Min. Pad Height: 102 mmK - Rise: 1753 mmL - Max Lift Height (Pad Only): 1854 mmM - Max Lift Height (6” Adapter): 2007 mmN - Drive-Thru Clearance: (Narrow Configuration) 2362 mmN - Drive-Thru Clearance: (Wide Configuration) 2692 mm

* An optional bolt-on top extension for columns raises the overhead bar an additional 610 mm. Must be ordered from the factory at time of order.

A - Height Overall: 3403 mmB - Width Overall (Outside of Base Plate): 3937 mmC - Width (Outside of Columns): 3708 mmD - Cover Height: 51 mmE - Inside Columns: 2997 mmF - Reach (Front Arm Min.): 991 mmG - Reach (Front Arm Max.): 1499 mmH - Reach (Rear Arm Min.): 991 mmI - Reach (Rear Arm Max.): 1499 mmJ - Min. Pad Height: 127 mmK - Rise: 1753 mmL - Max Lift Height (Pad Only): 1880 mmM - Max Lift Height (6” Adapter): 2032 mmN - Drive-Thru Clearance: 2616 mm

A - Overall Width: 2965 mmB - Outside length: 4420 mmC - Overall length: 5080 mmD - Height of columns: 2235 mmE - Min. Runway height: 114 mmF - Max. Rise: 1778 mmG - Max. Lifting height: 1892 mmH - Width between columns: 2711 mmI - Runway width: 483 mmJ - Width between runways (*): 946 mm - 1118 mmK - Length of runways: 4166 mm

4T Two Post Lift With Baseplate

4.5T Two Post Baseless Lift3.6 metres column height

5.4T Two Post Commercial Lift With Baseplate

4T Four Post Lift 4166mm Platforms

6.3T Heavy Duty Four Post Lift5816mm Platforms

Two Post Lift

Two Post Lift

Two Post Lift

Four Post Lift

Four Post LiftA - Overall Width: 3301 mmB - Outside Length: 6170 mmC - Overall Length: 6893 mmD - Height of Columns: 2338 mmE - Min. Runway Height: 192 mmF - Max. Rise: 1778 mmG - Max. Lifting Height: 1970 mmH - Width Between Columns: 3046 mmI - Runway Width: 508 mmJ - Width Between Runways (*) MIN: 952 mmJ - Width Between Runways (*) MAX: 1295 mmK - Runway Centerline (*) MIN: 1460 mmK - Runway Centerline (*) MAX: 1803 mmL - Outside Edge of Runways (*) MIN: 1968 mmL - Outside Edge of Runways (*) MAX: 2311 mmM - Drive-Thru-Clearance: 2482 mmN - Length of Runways: 5816 mm

A - Height Overall (*): 2870 mm.B - Width Overall (Narrow Configuration): 3353 mmB - Width Overall (Wide Configuration): 3683 mmC - Width Outside of Columns (Narrow Configuration): 3225 mmC - Width Outside of Columns (Wide Configuration): 3555 mmD - Floor Pan Height: 32 mmE - Inside Columns (Narrow Configuration): 3208 mmE - Inside Columns (Wide Configuration): 3538 mmF - Reach (Front Arm Min.): 698 mmG - Reach (Front Arm Max.): 1308 mmH - Reach (Rear Arm Min.): 863 mmI - Reach (Rear Arm Max.): 1384 mmJ - Min. Pad Height: 102 mmK - Rise: 1829 mmL - Max Lift Height (Pad Only): 1930 mmM - Max Lift Height (6” Adapter): 2083 mmN - Drive-Thru Clearance (Narrow Configuration): 2362 mmN - Drive-Thru Clearance (Wide Configuration): 2692 mm

£279

5.00 +

VAT

RRP £

3195

.00

£449

5.00 +

VAT

RRP £

4995

.00

£289

5.00 +

VAT

RRP £

3295

.00

£345

0.00 +

VAT

RRP £

3750

.00

£489

6.00 +

VAT

RRP £

5495

.00

7

Motorcycle Motorcycle

The BT5000 MkII, undoubtedly the UK’s most popular motorcycle roller brake tester, has been designed to comfortably test the brakes of all motorcycles regardless of size, weight or wheel size. The neat, compact unit is fitted into the floor and all readings are taken from a wall mounted remote console, ensuring complete freedom from obstruction in the testing area. Testing could not be more simple - just ride on and the BT5000 MkII does the rest, testing the brakes and weighing the bike with a user-friendly remote control handset to command the operation. The combination of analogue and digital display provides valuable diagnostic information relevant to brake performance such as drum ovality.

To complete the professional image and approach installed by the BT5000 MkII, a printer can be added to the system providing your customer with an official printout of his brake performance.

Firmly established as the benchmark for motorcycle MOT Testing, the bt5000 MkII is sure to increase customer confidence and hugely improve company profile - as well as giving you the accurate and consistent readings you want - time and time again.

• Motor (1ph) 1.5Kw 1ph 220/240V• Approx. pit dimension 1.880 x W900 x D330mm• Approx. console dimension H400 x W500 x D120mm• Max. axle load 1000kg•Unit weight incl. bed, console and packing 170kg

The illustration (left) shows a typical example of how a motorcycle MOT bay can be laid out. Equipment positioning will be subject to your own particular preference and architectural situation, as well as the opinion of your VI Inspector. The following points should also be observed:

• The brake tester must be 1.22m clear of any entrance / exit.• The brake testing area is taken from the centre roller of the brake tester (see drawing below).• Entrance to the MOT bay must be a minimum of 2.3m wide and 2m high.• The datum line is purely a guide to where the headlamp will sit, taking into account the wheel must remain in the standing area.

V.O.S.A. approved for use in MOT testing stations. Integral fixed aiming screen, Internal analogue LUX meter for accurate light intensity measurements.

Suitable for all types of Motorcycle, Cars and light commercial vehicles. Supplied complete with 3m of rails, instructions and certificate of V.OS.A. approval.

Single Post Motorcycle Lift 450kg Capacity

• 2 Locking positions for supporting the motorcycle for extended periods on the lift.• Remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine.• Portable, so can be used anywhere on a hard level floor.• Use with the Sealey range of wheel chocks to assist supporting the motorcycle whilst adjusting the frame supports and securing to the lift.

£239.95 exc VAT Model No: MCL500

BT5000 MkIIRoller Brake Tester

Class 1 and 2 VTS layout

BL500 - Electro HydraulicMotorcycle Lift

Headlamp Tester

Motorcycle MOTThis is perhaps one of the most complex areas of a motorcycle perspective. We simplify the whole process by drawing on years of experience with Motorcycle MOT installations, the most advanced, widely used and highly reputed range of equipment, working closely with the UK’s leading motorcycle MOT equipment supplier, with over 600 MOT installations, who are experts on Class 1 & 2 MOT Testing.

If you need any assistance with the layout of your MOT bay, or would just like some guidance on rules and legislation, do not hesitate to contact us. With years of experience we can assist you to a speedy conlusion of your application. A site visit can be arranged and we even provide you with a computer generated drawing.

Need Help ?

Unique wheelgrabbing system

Rear wheelremoval flap

Auxiliary airoutlet

Electro-hydraulicpower pack

• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with safety lock device to fix platform at three working heights of 760mm, 640mm and 500mm and to prevent accidental lowering.• Suitable only for motorcycles with a centre stand.• Support platform fitted with full width loading ramp.

Motorcycle Lift 365kg Capacity Hydraulic

Model No: MC365£339.95 exc VAT

Motorcycle Ramp 200kg Capacity• Manufactured from strong durable yet lightweight aluminium.• Provides safe and easy ramp access for single/inline wheeled vehicles.• Suitable for loading/unloading motorbikes or wheel barrows from vans or trailers.• Features hooks at one end to help secure ramp while in use.• Folding design allows compact storage when not in use.

£99.95 exc VAT Model No: MR200

Call for Pricing

£895.00+ VAT

These two products are Freewith the MC365 or MCL500

165mm Wheel ChockModel No. WC08

25mm x 4mtr Tie DownsModel No. TD0540S4

DiagnosticsDiagnostics

Combining versatility and ease of use with highly innovative functions and applications, Delphi’s DS car and LCV software provides dealer level capability for an extensive range of makes and models. In fact more than 60 car and light commercial brands and over 90,000 vehicle systems. Available on a range of platforms including a convertible PC and tablets, as well as a software only option, technicians can perform service functions, repair and adjustments to the key vehicle systems including petrol and diesel engine management, ABS, SRS, gearbox, climate control, traction control, instrument panel and immobilizer etc, quickly, efficiently and accurately.

8

PFull system coverage.PService light reset.PRead and erase fault codes.PRead and graph live data parameters.PIntelligent system scan (ISS) - full vehicle ECU scans.PProgramming.PComponent activation and adjustment.PECU coding.PPrint and save diagnostic reports.PFull OBD flight recorder.PVIN recognition.PBattery voltage monitoring.PIntelligent system updates (ISU).PIntelligent system identification (ISI).

New Delphi VCI

What it DoesFlexible diagnostics equipment to suite your garage needs...

Special offers availableon a 3 year software updates package.

Please ask for details.3

1 Delphi Diagnostic Interface VCI(Vehicle Communication Interface)1 2 Comprehensive Software Options

Car - LCV (SV10516) More than 60 car and LCV brands. And over 90,000 vehicle systems.LCV - Truck (SV10821) More than 47 heavy duty manufactures on more then 57,000 vehicle systems.

24 Flexible Hardware platforms.

DS150E (VCI & Software only)DS350E (Netbook Convertible PC)DS450E (Robust Tablet PC))DS650E (Rugged Tablet PC)

4

Delphi DS650E

Delphi DS150E

Delphi DS350E

Delphi DS450E

What it DoesBased on a semi-rugged convertible

PC, Delphi’s DS350E package provides dealer level capability for

an-extensive range of makes and models.

Featuring a rotating 10” screen, the technician can use the tool in tablet

mode to diagnose a vehicle. Then by simply rotating the screen, it converts

back to a regular laptop with the benefit of a keyboard to search

through technical data and more.

What it DoesThe car kit includes a Delphi VCI, USB security dongle paired to VCI

and carry case. Car software can be purchased with a one or three year license. Additional accessories are available, including a full range of vehicle manufactures specific OBD cables and PC hardware options.

What it DoesDelphi’s DS650E provides OE-level diagnostic capability across the key vehicle systems. Designed with the workshop in mind, the tablet comes with rubberised casing, integrated

handle and Gorilla® Glass in order-to prevent and protect from any

bumps or falls.The ergonomic design features a 10.4” XGA standard display with

projective capacitive dual-touch and digitizer pen input for greater ease

of use.

What it DoesThe Delphi DS450E package offers OE-level diagnostics across the key

electronics systems for both car, light and heavy duty vehicles. Powered by

Windows 8, the very latest tablet combines ultramobility and complete connectivity with rugged reliability.

With a wide-view 10.1” IPS (in-plane switching) display and five-finger

multi-touch technology, technicians can quickly determine fault codes

and be guided to the suspect area.

Own PC / Laptop(software/VCI only solution)

MINI VCI, Security Dongle,16 Pin EOBD Cable,Bluetooth dongle andDedicated Carry Case

DS150EVCI & Software only

SV10546

Robust Tablet PC10.1 inch screen

Tablet PC with 10.1” TouchScreen with Protector case

MINI VCI, security Dongle, 16 Pin EOBD Cable, Bluetooth

dongle and Dedicated Carry Case

DS450ERobust Tablet PC

SV11438

Netbook Convertible PC10 inch screen

Convertible PC with 10” TouchScreen, MINI VCI, Security

Dongle, 16 Pin EOBD Cable, USB DVD Drive, USB Sync

Cable, Dedicated Carry Case

DS350ENetbook Convertible PC

SV10774

Rugged Tablet PC10.4 inch screen

Rugged Tablet with 10.4” TouchScreen, MINI VCI, Security

Dongle, 16 Pin EOBD Cable,Bluetooth dongle andDedicated Carry Case

DS650ERugged Tablet PC

SV11455

Prices

From

£995

.00Call for

Informationon Packages

& Pricing


MaxiSys MS908 + 0BD1 Cables

Diesel Particulate Filter (DPF)

Engine Management

DS708 Pro Features

Live Data, Special Functions & Adaptions

Climate Control

Electronic Parking Brake (EPB)

Instrument Cluster

ABS/SRS

Door Modules

Steering Angle Sensors

Transmission

12 Months UK Warranty

Windows CE Operating System

Tyre Pressure Monitoring Systems (TPMS)

UK Technical Support

Parking Sensors

And Much More!

Service Reset

The DS708 Pro is the EU Edition of our MaxiDAS DS708. With all the same great features as before, the DS708 Pro now includes as standard, access to Autodata online, with the ability to upgrade to Autodata entire platform. The DS708 Pro is only available via Autel’s authorised dealers within in the UK.

The Autel MaxiVideo MV400 digital videoscope with its 5.5mm camera head is the ideal tool for examining hard-to-reach areas normally hidden from sight such as engine chambers.The MV400 has the ability to record digital still images and MPEG2 or MPEG1 videos, either on its internal flash memory or on the removable Micro SD Card (Optional). The ergonomic pistol gripped tool features a 3.5” full color LCD screen, auto focus and a viewing capacity as close as 3mm with a crystal-clear output and the capability to stream digital video directly to a PC. The multipurpose Videoscope is your solution for inspecting machinery in the safest, quickest and most cost-effective way possible.

P 12 Months Updates IncludedP 12 Months UK WarrantyP Enhanced European SoftwareP UK Technical SupportP 12 Months Autodata Included

Instrument Cluster

Oil Service Reset

Some Steering Sensors

Read/Erase Codes

Parking Sensors

TPMS

40+ manufacturer coverage

Climate Control

Prints Data vis PC

Electronic Parking Brake

MOT Pro Features

Growing DPF Coverage

C.A.N. Capability

Troubleshoot ABS/SRS

Full System Scan

OBDII Compliant

And Much More!

12 Months Updates

Highly functional, the MOT Pro provides 40+ manufacturer coverage offering diagnostics on the most common modules such as OBD, Transmission, ABS, AirBag, Electronic Parking Brake, Oil Service Reset, some TPMS, some steering control sensors, climate, audio and others.

AAIEU908D RRP £499.99

Special Price £385.00

The MOT Pro

9

The DS708 ProMaxivideoMV400

MaxiVideo MV105

FREEwhen you buy the MaxiSys MS908

MaxiSys MS908 + OBD1 Cables

UP TO 8 HOURS BATTERY

MAXISYS GUIDECAPABILITY

FEATURES

SCREEN RESOLUTION

SIZE

WEIGHT

OBD-1 Connector Adaptors Included

a 12 MONTHS UPDATES INCLUDED.a 12 MONTHS UK WARRANTY.a ENHANCED EUROPEAN SOFTWARE.a UK TECHNICAL SUPPORT.

Our all new MaxiSys MS908 is built on the foundation of the hugely popular DS708 Pro including quite a number of major upgrades. The MaxiSys is 50% more powerful, offers a20 second boot up and is built on the multi-tasking Android operating system.

The MaxiSys MS908 includes a number of great features such as over 40 manufacturers, 5 Megapixel Camera, 32GB Internal Hard Drive and Wireless Bluetooth diagnostics via the Vehicle Communication Interface (VCI). It also includes a larger 9.7” screen and additional connector kit to access pre OBDII vehicles.

The MaxiSys MS908 is also future proof and will be compatible with the Autel ECU AE J2534-1 & J2534-2 programming device when released.

As mentioned the MaxiSys also comes with an additional 13 OBD-1 Connectors.

With A 20 Second Boot Up, The MaxiSys MS908

Leaves it’s rivals behindClimate Control

Door Modules

Diesel Particulate Filter (DPF)

Electronic Parking Brake (EPB)

Engine Management

Instrument Cluster

Live Data, Special Functions & Adaptions

Parking Sensors

Shop Manager/Web Browser/Email Client

Service Reset

Steering Angle Sensors

Tyre Pressure Monitoring Systems (TPMS)

Transmission

UK Technical Support

12 Months UK Warranty

Plus much, much more!

ABS/SRS

MaxiSys MS908 Features

ASIANAcura, Daewoo, Honda, Hyundai, Infiniti, Isuzu,Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion,Subaru, Suzuki, Toyota.

AMERICANChrysler, Ford, GM.

EUROPEANAbarth, Alfa Romeo, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, Fiat, Ford, Jaguar, Lancia, Land Rover, Maybach, Mercedes-Benz, Mini, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volkswagen, Volvo.

Compatible with the following manufacturers:

£1695.00 (With a Trade in)

£1995.00

*

£950.00£1300.00

Normal list price £1995.00Trade in any old diagnostic tool, to get the MS908 for £1595.00 + VAT

All prices exclude VAT

*

Get £3

00.00

OFF

Whe

n tra

ding i

n any

old D

iagno

stic To

ol

*

£149

.95 +

VAT

10


Advanced Kit

Standard KitStarter Kit

The perfect introduction tooscilloscope, these kits allowyou to test:

• Cylinder balance• Relative compression• Lambda sensors• MAP & MAF sensors• Cam & crank sensors• ABS sensors• Knock sensors• Primary ignition• CAN and LIN And much much more.

Just add accessories to enablemore tests.

Includes all the starter and standard tests plus:

• FlexRay• Coil-on-plug output tests• High-frequency serial data• Breakout leads for easier connections• Fuse box diagnostics

With this more comprehensive kit you can also test:

•Alternators & starters•Fuel injector currents•Ignition coil currents•Secondary ignition•Fuel pumps & fans•Glow plugs

FlexRayStarting Volts and Amps

Diesel Injector Petrol Injector

Can bus Idle speed control valve Lin bus

2-CHANNEL

PicoScope 4225 2-channel1 x Multimeter style test probe red1 x Small crocodile clip black & 1 x red1 x Battery clip black & 1 x red, 1 x 20:1 attenator1 x Flexible back-pinning Probe black & 1 x red1 x Premium test lead BNC to 4mm blue1 x Premiun test lead BNC to 4mm redSoftware CD, Pico Advanced Vehicle Diagnostics DVDQuick start guide, Catalogue, Cable: USB2 1.8m blue

PP920 Starter 2-Channel Kit £525.00 + VAT

4-CHANNEL

PicoScope 4425 4-channel1 x Secondary Ignition Pickup1 x Multimeter style test probe black & 1 x red1 x Small crocodile clip & 1 x red2 x 20:1 attenuator, 2 pin breakout leadSet of 4 Premium test leads: BNC to 4mm1 x Battery Clip black & 1 x red2 x Flexible back-pinning Probe black & 2 x redSoftware CD, Pico Advanced Vehicle Diagnostics DVDQuick start guide, Catalogue, Cable: USB2 1.8m blue

PP921 Starter 4-Channel Kit£895.00 + VAT

2-CHANNEL

Contains all the items in the 2-channel starter kit plus:Extra S Hook, 2 x Secondary Ignition Pickup1 x Multimeter style test probe blackBack-pinning probes1 extra x 20:1 attenuator, 1 x 2 pin breakout lead60A / 20A DC current clamp, 600A DC current clampStandard Case, Posters: ECU & PicoScope Automotive

PP922 Standard 2-Channel Scope Kit£995.00 + VAT

4-CHANNEL

Contains all the items in the 4-channel starter kit plus:S Hook, 2 x Secondary Ignition PickupBack-pinning probes2 extra x 20:1 attenuator, 60A / 20A DC current clamp600A DC current clamp, Standard CasePosters: ECU & PicoScope Automotive

PP923 Standard 4 Channel Kit£1295 + VAT

4-CHANNEL

PicoScope 4425 4-channel60MHz scope probe (CAN, FlexRay)2 x S Hook, 4 x Secondary Ignition PickupCOP probe with earth lead kitSet of 4 Spark plug extension leadsFuse breakout kit - ATC & MiniProtective rubber boot and hook scope2 x Multimeter style test probe red & 2 x black1 x small crocodile clip black & 1 x red1 x Dolphin clip black & 1 x redBack-pinning probes4 x 20:1 attenuator, 1 x 2 pin breakout lead2 x 60A / 20A DC current clampNew 2000A / 200A current clampSet of 4 universal breakout leadsSet of 4 Premium test leads: BNC to 4mm1 x Battery Clip black & 1 x red2 x Flexible back-pinning Probe black & 2 x redSoftware CD, Pico Advanced Vehicle Diagnostics DVD,Posters: ECU & PicoScope AutomotiveAutomotive, Quick start guide, Advanced caseCatalogue, Cables: USB2 1.8m blue

PP925 Advanced 4-Channel Kit£1795.00 + VAT

11


PROBLEMS WITH

BROKEN, FAULTY

OR MISSING

TPMS SENSORS ?

The Number One Asian Diagnostic ToolThe market leading Asian scan tool for Asian vehicles

OEM quality data for Japanese and Korean vehicles, which includes the most comprehensive coverage of Japanese ‘Grey’ imports.

Vehicle CoverageThe G-Scan software is without doubt the best for Asian applications and with it’s comprehensive coverage for Grey Imports there is nothing to rival it. On top of this the G-Scan has an ever increasing coverage for European and officially imported American vehicles as well.

For a complete and up to date coverage list please visit the G-Scan websitewww.blue-print.com/gscan

Call for more detailsPrices from £1396.00 + VAT

on the lite version

£35.00 + VAT

Call for more detailsPrices from £1695.00 + VAT on the base version

2Software Included

FREE !

Years

AudiBMWDaciaFordLadaLand RoverMercedes BenzMINIPeugeotRenaultSEAT

DaihatsuHino TrucksHondaInfinitiIsuzuLexusMazdaMitsubishiMitsubishi FusoNissanSuzuki

SubaruToyotaChevrolet (GM)DaewooHyundaiKiaSsangyongPeroduaProtonCheryGreat Wall

ŠkodaVauxhall / OpelVolkswagenVolvoChryslerDodgeFord (USA)JeepMahindraTata

NEW to RangeG-Scan 2 with built in

4 Channel Oscilloscope &Digital Multimeter

Original G-Scan 1Available in Lite or

Complete pre OBD cable package

Call for Price

VAUXcomVauxhall/OPEL/SAAB Diagnosticsat a fraction of the TECH 2 price

VAUX-COM PC based diagnostic tool covers almost all Vauxhall and Opel cars and light vans and allows you to diagnose almost all modules including the engine management, airbag, ABS, immobiliser, instruments and many more.

• Fault code reading and clearing• Live sensor data display• Output tests let you switch components on and off for testing• Programming and setting changes• Key and keyfob programming

This PC / Laptop based tool replicates almost all the functions of the dealer “TECH 2” tool for a fraction of the cost.Supplied complete with the latest genuine CAN-BUS interface VAUX-COM covers models made from 1997 to 2011 including Astra H, Corsa D, Vectra C, Captiva and Movano.. It also covers SAAB 9.3 abnd 9.5 models too....If you have ever used a Tech 2 on a Vauxhall, I’m sure you were amazed at the sheer number of items you can test and talk to.VAUX-COM can give you virtually this level of coverage at a fraction of the price. Almost all current models are included and almost all systems on those models can be diagnosed

The VAUX-COM PC / Laptop based diagnostic tool for Vauxhall

£640.00 + VAT

VCDS (VAGcom Pro)The Essential VAG Diagnostic Tool

VCDS Pro is a PC/Laptop based tool for the VAG Group of Cars and Light Commercials. Near OE level of coverage at an incredible price make VCDS Pro the must have tool for the Independent or home enthusiast.

VCDS Pro kit Includes:

• Genuine Ross-Tech HEX-USB+CAN interface• The latest version software on CD-rom• Latest printable user manual on the CD• Full colour printed installation instructions• Free expert telephone support for use and car diagnostics• Strong carry / storage case• Printed user manual• 2 x 2 adapter for older cars• USB cable

£290.00 + VAT

AXONE S CarThe latest diagnostic interface

Package Composition

Code: AXS-CAR

Axone S: with IDC4a Car Software, Light Commercial Activation, Navigator NANO S interface, Storage Case, Cover.1st Years Annual Car TexPack

(Contracts will be added in line with tool activation date)

£1,595.00 + VAT

Diagnostics

12

DiagnosticsAxone S Car

Axone 4 Fleet Premium

OHW Agri/Construction for PC

Marine

Now, TEXA has filled this gap in the market with AXONE S.The AXONE S is the first product of its kind: a true multi-utility diagnostic tool. The latest diagnostic interface.

For MARINE diagnostics, TEXA offers the unbeatable combination of the NAVIGATOR TXBs and the extremely robust AXONE 4, two perfect tools for use in tough and outdoor environments. The NAVIGATOR TXTs can also be connected via Bluetooth to a Personal Computer, and can be used to diagnose all kinds of vehicle in the TRUCK, CAR, OFF-HIGHWAY and BIKE environments.

Package CompositionCode: AXS-CARAxone S: with IDC4a Car Software, Light Commercial Activation, Navigator NANO S interface, Storage Case, Cover. 1st Years Annual Car TexPack.

(Contracts will be added in line with tool activation date)

Package CompositionCODE : AX4-F/PREMIUMAXONE 4 CAR: including IDC4 Premium Car & Supercar ActivationIDC4 TRUCK Premium Integration for Axone 4NAVIGATOR TXTsSTANDARD TRUCK Cable CaseSTORAGE CASEPROTECTIVE SURROUNDPOWER SUPPLY & ADAPTER KITOBD LOG1ST YEARS ANNUAL CAR TexPack1ST YEARS ANNUAL TRUCK TexPack1ST YEARS ANNUAL TRUCK Tex@Info Tech Helpline Contract

Package CompositionCODE : OHW/PCNAVIGATOR TXTs : including IDC4 Plus Agri & ConstructionSoftwarePOWER SUPPLY & ADAPTER KITSILVER CABLE CASE (no cables included)1ST YEARS ANNUAL OHW TexPack1ST YEARS ANNUAL OHW Tex@Info(Contracts will be added in line with tool activation date)

Marine Package’s Available

£1595.00 + VAT (Other combinations are available)



Call For More Details

Free No obligations, on site demonstration

13

Air ConAir Con

Features• R134a or R1234yf compatible• High visibility colour TFT display with interface Graphics• DATABASE/SERVICE management via SD card• Rotating gauge display (excluding Germany)• 20 Kg internal tank for 760R• 30 Kg internal tank for 760R BUS• +/- 15 gr load precision• High efficiency refrigerant recovery (above 95%)• Dual stage vacuum pump• Hermetically sealed bottles• Automatic high precision oil injection• Automatic oil bottle recognition• Automatic precise refrigerant measurement check (patented)• Scale lock system• Automatic service procedure management• Functionality:• Multilingual software coverage• Service hose length compensation• Simplified service• Automatic precise oil measurement check (patented)• Scale lock system• Automatic non condensable management

For a Limited Time

£1845.00 £2650.00£2195.00List Price £2640.00

List Price £3840.00List Price £3125.00

Features• R134a compatible• High visibility, 4x20 character, blue backlit LCD screen• Management of Database and service records by SD Card• 10kg tank• Double stage vacuum pump• Charging pressure +/-15g• High efficiency refrigerant recovery (over 95%)• Automatic oil injection (timed function)• 2 manual recharging line control valves• Functioning modes: database, personalised service, my database• Automatic compensation for length of recharging lines• Automatic maintenance alarm• Simplified maintenance

Optional ExtrasThermal printerVehicle flushing kit

The KONFORT 710R provides as standard all the essential functions that have established the KONFORT 700 Series as the best recharge stations on the market.

Texa Konfort

Texa Konfort

710R 720R 760R

780R

The KONFORT 720R is designed to recharge all car, commercial, HGV and

tractor air conditioning systems.

The KONFORT 760R 2 Gas Ready

Price shown is for a RI34a model(R1234yf version available, call for prices)

Price shown is for a RI34a model(R1234yf version available, call for prices)

Despite its highly competitive purchase price, the 720R delivers all the advanced technology and stylish design of the KONFORT range.

The KONFORT 720R is equipped with automatic refrigerant recovery and recycling and oil drainage functions. Quantities of oil and UV tracer are controlled by an automatic valve system. The operator therefore only has a few simple tasks to carry out.

The 720R can be purchased configured either for the old R134a refrigerant or the new R1234yf refrigerant. A retrofit kit is also available to change refrigerant type.

It is no larger than the other stations in the series, the 780R incorporates two separate tanks and two separate circuits for recovery, recycling and recharging. It can therefore function with both refrigerants (the old R134a and the new R1234yf) simultaneously.

The entire recharge procedure is completely automatic thanks to hermetically sealed oil tanks, a scale locking and release system and automatic refrigerant weighing. The 780R diagnosis and recharge station even implements a special procedure to clean all its internal circuits during refrigerant recharging.

The machine carries out the flushing procedure automatically in order to clean out the system when changing from one refrigerant to the other. This procedure takes approx. one minute.

The 780R will provide a solution for workshops’ who are required to deal with new vehicles fitted with the new R1234yf refrigerant, but also maintain vehicles which will continue using the traditional R134a refrigerant.

The KONFORT 780R is the top of the range model. £3795.00List Price £5360.00

Automatic Ignition Waste Oil Heater

Waste Oil Heaters

14

Waste Oil Heaters

Leasing from

£11.37 + VATper week*

Product Code: 41.921.000

AT 400

Leasing from

£8.03 + VATper week*


AT 307

Thermobile Waste Oil Heaterscan be operated using waste oil from diesel or petrol engines,

gearboxes, transmissions, hydraulic systems, diesel oilor any combination of these

Turn your waste oilinto clean heatthis winter !!!


AT 500

Low:

82,000Hi:

140,000Low:

24 3,000Hi:

41Max:

4.0Min:

3.0

Heat output (Btu/hr) Heat Output (KW) Heated Air Flow(m3/hr)

Fuel Consumption Oil (1/hr)

55 1.10 No £955.00£3150.00150

Tank Capacity(1)

Power Consumption230 V (AMPS)

ThermostatConnection

YourSaving

ThermobilePrice

Flue ConnectionØ (mm)

Low:

68,000Hi:

92,000Low:

20 800Hi:

27Max:

2.7Min:

2.0



50 0.80 No £700.00£2250.00150

Tank Capacity(1)



YourSaving

ThermobilePrice


Low:

123,000Hi:

201,000Low:

36 3,000Hi:

59Max:

6.2Min:

4.3



55 1.20 No £1115.00£3710.00200

Tank Capacity(1)



YourSaving

ThermobilePrice


*

Leasing from

£13.44 + VATper week

• Clean combustion and high efficiency• High capacity air distribution fans• Supplied with manual dial type remote thermostate and 5 metres of cable• Optional extra is a digital thermostat and time control• Summer ventilation facility• Models SB80 and SB110-package includes motor and pump kit for connection to bulk fuel tank with bottom outlet and a maximum distance of 15 metres (pipework and electric cable not included). For top outlet bulk tanks and/or distances above 15 metres, a pneumatic pump kit is available at an extra cost.• Complete flue kit provides for approximately 6 metres (19 feet) ground clearance and now include Roof Seal & Fitting Kit plus two Wall Bands

KONSB40PACKAGEKONSB60PACKAGEKONSB80PACKAGEKONSB110PACKAGE

140,000180,000270,000390,000

3200410062008100

8080130130

4.66.09.012.8

1 to 1.3 CFM1.5 to 1.8 CFM2 to 2.6 CFM3 to 3.6 CFM

230230

400+N400+N

£3899£4299£6299£6899

Part NumberHeat

output(Btu/hr)

Airmovement

(m3/hr)

Fueltank(ltr)

Fuelconsumption

(ltr/hrs)

Compressed air

displacement

Electricsupply(volts)

OfferPrice

£2195.00 + VAT

Special Offer Price

£1550.00 + VAT

Special Offer Price

£2595.00 + VAT

Special Offer Price

PricesInclude

CompleteFlue Kit

PricesInclude

CompleteFlue Kit

PricesInclude

CompleteFlue Kit

Call for pricing

ToolsTools

The W7150EU High-Torque 1/2” Impactool™is the only cordless impact wrench that can perform as our best-in-class. The W7150EU cordless tool will make quick work of tough jobs that professional technicians do every day.

• 1 057 Nm (780 ft-lb) of maximum torque and 1 486 Nm (1 100 ft-lb) of nut-busting torque.• Steel-reinforced housings add strength for unmatched drop resistance.• Variable speed switch with electronic brake provides maximum control of the tool.• High-capacity 3.0 Ah battery delivers maximum performance and runtime.• Comes with a case, two batteries and a fast charger.

1 486 Nm (1 100 ft-lb) ofnut-busting torque

Special Price £398.75W7150EU-K2 RRP £614.00

The W7150EU-K2

ABAC Compressors

A powerful, durable and reliable workhorse whose reputation is built on helping you build yours. It’s been rigorously tested, beaten up, dropped and pushed to the limits to make sure it will always work when you need it most. The 2235 Series is incredibly powerful, durable and reliable so that it delivers every time you need REAL WORK done right.

• 1 220 Nm (900 ft-lb) of maximum torque in reverse - that’s the best-in-class performance.• Ingersoll Rand TwinHammer impact mechanism is the strongest, most durable and longest life mechanism in the industry.• Titanium hammercase is lightweight with unparalleled durability and offers great operator comfort.• Unique reverse-bias 7-vane motor delivers even more power in reverse.• Feather-touch trigger allows precise delivery of power and speed.• 4-position power regulator in forward helps adjusting the power to the application.• One-hand forward/reverse switch for easy operation.• 360° swivel inlet helps eliminating twisted hoses.• FREE two-year limited warranty without tool registration. delivery of power and speed.

1 220 Nm (900 ft-lb) ofmaximum torque in reverse

Special Price £255.002235QTiMAX RRP £355.00

Special Price£259.75

RRP £355.00

Special Price£259.75

RRP £355.00

The 2235QTiMAX

15

• 224 Nm (180 ft-Ib).• Only 1.54 kg.• Jumbo-hammer impact mechanism.• Composite housing.• 2-position power regulator.

• 244 Nm (180 ft-Ib).• Only 1.54 kg.• Jumbo-hammer impact mechanism.• Composite housing.• 2-position power regulator.

The power of an impact with the reach of a ratchet !

The power of an impact withthe reach of a ratchet !

2015MAX - 3/8”

2025MAX

Compressed air made easy, even for the most demanding applications. The new ABAC UK piston portfolio offers you plenty of opportunities to maximize your market potential, based on an extended product portfolio, powerful add-ons and services for a successful sales journey to reach satisfied customers. Reliable and innovative products spread out over three different comfort levels generate an offer so varied, a perfect fit with the customers’ needs is bound to be found.

16

Compac has been manufacturing high quality hydraulic products since 1946. The aim of the experienced engineering staff at Compac is to ensure excellence in quality and reliability with the key objective of creating satisfied customers.

3 year factory warrantyCompac has set a benchmark in the industry by being the only manufacture to offer a full 3 year warranty. No other manufacture of similar products has exceeded or even matched this long warranty. The reason that Compac´s reliability and durability is setting the benchmark in the industry is the unique combination of excellent raw materials, experienced and quality minded workforce and a management system that embraces quality manufacturing.

1Ultra low entry height only 77 mm.

2Extremely low chassis for access under “any” vehicle.

3Additional foot pedal pumping feature provides fast saddle raising to load.

4Long reach chassis improves access to lifting points deep under vehicles.

5Ergonomically designed handle for operator comfort. Rubber coated.

1Ergonomically designed handle for operator comfort. Rubber coated.

2Additional foot pedal pumping feature provides fast saddle raising to the load.

3Safety lowering control valve for safe lowering even under maximum load.

4Protective cylinder jacket to prevent intrusion of dirt and welding splatter.

5Min. height 80 mm.

6Max. height 500 mm.

2T-77 Ultra Low Entry 2T-HC

2T-HC

2T-C

5

5 1

1

1

2

244

3

31Ergonomicallydesigned handle for operator comfort. Rubber coated.

2Additional foot pedal pumpingfeatureprovides fast saddle raising to the load.

3Safety lowering control valve for safe lowering even under maximum load. Pressure relief valve prevents overloading.

4Max. height 735 mm.

5Min. height 98 mm.

1

52

4

3

Price £369.00Includes free delivery normal £25.00



Wider range of Compac hydraulic equipment available, please contact us for more information.

A to Z Autoparts01635 871326

AutolecEastbourne 01323 720998Bexhill 01424 211234Newhaven 01273 514668

Dorset Autospares Ltd Wimborne 01202 887471Poole 01202 670705Blandford 01258 454511Weymouth 01305 767925Downton 01725 511999Christchurch 01202 484434Salisbury 01722 418999Andover 01264 333999Honiton 01404 45211Bridport 01308 420587Southampton 02380 637637Isle of Wight 01983 619573

Davmac & Transco LtdDavmac 01623 550744Transco 0115 978 4237

CT AutopartsRushden 01933 315011Kettering 01536 416404

Jim Barrow Motor Factor0151 609 0609

PMA Motor FactorsChichester 01243 772230 Cranleigh 01483 276099Dorking 01306 881115 Horsham 01403 266444 Pulborough 01798 875666

MotofactsGreat Yarmouth 01493 650819Halesworth 01986 872939Lowestoft 01502 500600

Motor ServMilton Keynes 01908 220995Bedford 01234 852800Huntingdon 01480 450818Bletchley 01908 220995

Prime Motor FactorsFree Phone 0800 923 3000

Raynor Motor Factors01282 691222JPN Autoparts01282 412550

Business Locations

Documents

PMA Motor Factors Garage Equipment Spring Edition